The installation last so long time
I am installing Hyperion Financial Reports, and it shows the installation is "Completed", but process bar is 99%, and say "Creating Oracle Inventory and it will take a few mins", but I have waited 40 mins, and it is still 99%, what's wrong with me? I am afraid of error and didn't stip it manully?
Hi,
This can happens sometimes and is a known issue, here is the workaround.
"EPM System Installer freezes during Oracle inventory creation. Workaround: If EPM System Installer freezes for more than 10 minutes:
1. Quit EPM System Installer.
2. Navigate to HYPERION_HOME and if necessary, delete the inventory folder.
3. Go to HYPERION_HOME/OPatch and run the createInventory.bat|sh (UNIX) script. This creates the HYPERION_HOME/inventory folder properly."
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Installing the printer takes a long time and then the installation fails
Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get itHi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Does anyone know what's up with the iPhone 4s' battery life? Some days it last a long time and other days it drains extremely fast.
Not to point out the obvious, but battery life depends very much on what is running and how much the device is being used.
If the battery lasts longer on a day you make no phone calls, but lasts less the day you make 5 hour long calls, this is to be expected.
If however the iPhone has the same level of use on both days, with different power consumption, this would infer a background process (or App) is trying to do something (connecting to server or creating a back up etc).
I switched off all thrid party apps from being included in my iCloud backup, which saves a huge amount of space on the cloud and allows the back up to take barely a couple of minutes.
Battery life seems ok so far on my 64GB 4S (Bluetooth on, Wi-Fi on, Location Services on, Push notifications on, Screen set to just under half brightness with Auto Adjust on) -
Slave instance can not synchronized with the master for a long time
Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170 Number of PERM messages not acknowledged
9245 Number of messages queued due to network delay
172415 Number of messages discarded due to queue length
25880 Number of existing connections dropped
3407 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994 Next LSN to be used
0/0 Not waiting for any missed log records
328872/466092 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
2323 Number of duplicate log records received
0 Number of log records currently queued
6768 Maximum number of log records ever queued at once
55284 Total number of log records queued
120M Number of log records received and appended to the log (120475988)
111 Number of log records missed and requested
2147M Current master ID (2147483647)
2 Number of times the master has changed
0 Number of messages received with a bad generation number
8505306 Number of messages received and processed
12 Number of messages ignored due to pending recovery
471869 Number of failed message sends
12M Number of messages sent (12959945)
0 Number of new site messages received
1 Number of environments believed to be in the replication group
990543 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup complete
6244678 Number of transactions applied
0 Number of startsync messages delayed
1 Number of elections held
1 Number of elections won
No election in progress
0.057097 Duration of last election (seconds)
8944103 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
5273M Number of records added to a bulk buffer (5273592170)
10M Number of bulk buffers sent (10490865)
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
slave db_stat:
0 Number of PERM messages not acknowledged
0 Number of messages queued due to network delay
0 Number of messages discarded due to queue length
1454 Number of existing connections dropped
0 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048 Next LSN expected
330433/2013808 LSN of first log record we have after missed log records
329543/5500501 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
5256M Number of duplicate log records received (5256599432)
3925284 Number of log records currently queued
3925285 Maximum number of log records ever queued at once
4880561 Total number of log records queued
3578038 Number of log records received and appended to the log
1912297 Number of log records missed and requested
0 Current master ID
1 Number of times the master has changed
0 Number of messages received with a bad generation number
12M Number of messages received and processed (12980442)
2 Number of messages ignored due to pending recovery
0 Number of failed message sends
1912307 Number of messages sent
0 Number of new site messages received
0 Number of environments believed to be in the replication group
0 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup incomplete
110568 Number of transactions applied
80 Number of startsync messages delayed
0 Number of elections held
0 Number of elections won
No election in progress
0 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
0 Number of records added to a bulk buffer
0 Number of bulk buffers sent
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike -
The 0co_om_opa_6 ip in the process chains takes long time to run
Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
PARAM_NAME - OBJSELSIZE
PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
PARAM_NAME - NOTSSELECT
PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
PARAM_NAME - NOBLOCKING
PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps .. -
My Iphone 4 wont turn on, but if i have it plugged in the wall for in long time it turns on by itself and gets stuck at the apple logo.
i've tried everything but it still doesen't work, can you please hep me?First - Press both home button and switch on/off for 15 seconds it will reboot,If it does't work try
second - connect ur iphone to system and open itunes then Press and hold both home button and switch on/off for 15 seconds phone will reboot then as soon as apple logo appears leave switch on/off without leaving home button it will go to restore mode then restore ur phone with latest version.
Hope this will resolve ur issue but all ur data will be errased.
Thanks -
How can I reinstall 10.9? The installer is no longer on the Ap store.
My 10.9.5 is crashing constantly- the Finder is flashing in an endless cycle, and I need to reinstall OS 10.9.5. However when I try to use the recovery partition to reinstall the OS, I get the error message that the download is temporarily unavailable, try again later. However, when I search the Mac Ap store on another Mac, I see that the 10.9 installer is nowhere to be found. Was this removed to force people to upgrade to Yosemite? Not a good idea, since many applications (Dragon Dictate Medical for Mac) is not compatible with 10.10, and likely won't be for another 2 years, given Nuance's past performance. So is there any way to reinstall 10.9? In the meanwhile, I'm dead in the water, unable to reinstall 10.9.
Thank you for everyone's input. Here's the follow up. I discovered that the Finder crashing was caused by Transporter Desktop. There is a fix involving typing in a command in Terminal to fix some sort of directory corruption. That fixed the FInder crashing and obviated the need to reinstall Mavericks, but I was not able to download the installer through the recovery partition Reinstall Mac OS utility. Over 24hrs, I kept getting an error messsage that the download was temporarily unavailable. However, I was able to find and download it from the Mac Ap store by looking it up under "Purchased" items. You can't find any older versions of Mac OSX in the "Search" field. It only lists the latest version (Yosemite). So anyone else in this situation may have to go to the Mac Ap store and search under "Purchased" to find the installer for older versions of the Mac OS installer. This can be used to create a bootable install volume, but you'll need another computer and external drive to do the install if your Mac is really dead. Maybe the recovery volume Reinstall MacOS utility will work another day, but I had no luck over the last 24hrs. This MBP originally shipped with 10.7, and was upgraded to 10.8 and 10.9 via the Mac Ap store. After the MacOS Installer downloads to your Applications Folder, make a copy of it before you run it to save you from having to download the 5.3GB file again if you have to reinstall it again in the future. It takes a long time to download a 5.3GB file.
-
The website takes a long time to lod and it does not display correctly the layout is expanded.
When i try to load the website it takes a long time to load and when it does the layout is expanded and no images appear. The site has the same problems with IE and chrome. I did recently use Reginout.
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Did you check the Accessibility settings in Windows?
*http://windows.microsoft.com/en-US/Windows7/Make-the-computer-easier-to-see-optimize-visual-display
*http://windows.microsoft.com/en-US/windows7/Getting-the-best-display-on-your-monitor -
Retrieving free/busy information from the server takes very long time
Hello, we are running Outlook 2010 32-bit in Windows 7 64.bit, and have encountered a strange problem, whenever we want to book
a resource (i.e. conference room) from Scheduling assistant, it takes very long time, sometimes even more than a minute to see the utilization of the room, it being stuck at "Updating schedule information. Retrieving free/busy information from the server"
The interesting thing is that most newly deployed PCs exhibits this same behavior, while older machines with basically the same setup gets the availability information almost immediately.
It is unclear whether this is a server setting or desktop issue, as all new Windows 7/Outlook machines that are deployed from the WDS-server exhibits the same slow behavior.
Please advise any troubleshooting steps to investigate the very slow retrieval lookup of free/busy information from the Exchange server.Hi,
Does this issue occur on OWA?
If no, it means the issue is mainly related to the Outlook client.
Regards,
Simon Wu
TechNet Community Support -
Is it harmful for the laptop battery to turn it ON on the AC power for long time?
Hi
Thank you for reading my post.
Is it harmful for the laptop battery if I put laptop on for a long time on AC power?
Thanks
Solved!
Go to Solution.Hello,
the simple answer is no.
The Lenovo powermanager should do the work for you.
May be you are able to switch charging to automatic charging in powermanager settings.
I don´t know if the option, in the newest versions of powermanager, is choosen as standard.
May be there isn´t a switch or checkbox, cause the manager is doing it already.
But it won´t harm your battery, when you let it plugged in AC.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
Email messages take a long time to enter on my home PC (this is the pc I use for appr. 4-5 years now to read Thunderbird email.
On other thunderbird installed machines I don't have this problem, the mail enters quickly. Also when I connect at home (Wifi) with my laptop the email comes in quickly. So it is the thunderbird I am usiong on my desktop that has the problem.''Matt [[#answer-670744|said]]''
<blockquote>
Thunderbird or your anti virus or your network card.
My money would be on the anti virus. What do you use?
</blockquote>
I am using Norton on laptop as well as desktop PC.
Desktop is 4-5 years old, might be the network card by now. Can I check ? -
Synchronisation ipad with itunes lasts very long time
It takes very long time (> 1 hour) to "finish synch" my Ipod with itunes.
Can somebody help?I am having the exact same problem. I am using Pages '09 on my Mac. When I emailed myself a Pages file and attempted to open it on my iPad 2 (running iOS 5 beta), it switched over to the Pages app and then the white bar stopped at around what looked to be 3-4% complete.
I tried uploading to Dropbox first, then importing to Pages from there, but I get the exact same result. Please help. -
every time i try to oppen a file like an image or a PDF it oppens by default using oreview built in appliction
occasionally this is accompanied by a long delay after wich the preview oppens every file in the downloads folder and i can navigate through them with ease
i would like to know why the application has this elay i really want to avoid it
because every tome i want to oppen an image there is a risk it would take a minnute or twoIn the finder right click on the iPhoto library and show package contents, find the folder named import (or importing) and drag it to the desk top. Do NOT make any other changes of any sort. Launch iPhoto and you will Be fine. Open the import(ing) folder and if there are any photos in it you need import them to iPhoto then trash the imoort(ing) folder.
LN -
I was notified that several important updates were available for my CS 6 applications. I have attempted to install these updates 4 times now. The error messages are as follows:
Extension Manager 6.0.8 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Photoshop Camera Raw 8.6(CS6)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Dreamweaver CS6 (to version 12.0.3) to address HiDPI-compliance and resolve critical bugs.
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Photoshop 13.0.1.3
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
DPS Desktop Tools CS6 31.0.1 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe InDesign CS6 8.0.2 updates
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
So I tried quitting and trying again to no avail. Anyone have any suggestions??? Thanks TomThere's a forum which is the best place to deal with installation issues. I'd ask there:
Downloading, Installing, Setting Up -
How can I extend the history to a longer time on things I download
My downloads are only showing a history of about a week. How can I keep all the things I download for a longer period of time? Is there any way to retrieve downloads from a few months ago?
Hi,
look at the discussion on May 25:th 2001, subject "How to get the cursor into a specific field", it might give you an idea.
To give you some hint right now:
In the "Additional PL/SQL Code" tab, "Before displaying the page", add following code:
htp.p('<BODY onLoad="document.forms[0].elements[6].focus();">');
forms[0] if you only have 1 form, and elements[the number of the item you want to be in focus]
I hope this could help you
/Sara
Maybe you are looking for
-
Links in emails (Thunderbird) do not open in Firefox 16.0.1
Installed 16.0.1 today. Links in emails used to open as a new tab, now they open in a new window and only as a blank page. I reconfirmed both FF and TB as default, yet the problem persists.
-
Search is working fine on one server but not giving results from other servers. moss 2007?
hi, we have multi server or wfe architecture. configured search service on one server 01, central admin is 02, and query as 03, now crawled content with hostname:port of 01. everything is fine. but now when we trying to search results its giving resu
-
QM:Setting for Recurring Inspections(every 2 hour)for Batch Material Stock.
Hi, all =) I hope, you know necessary settings for my situation. Because on our russian SAP-forum I haven't got answer until now. Situation: We have Batch Material Stock on the plant. And it is necessary to do for that stock Quality Control every 2
-
Can you have a button play a specific frame in a different Edge Animate page?
I'd like to create a movie that can open other HTML files and go to a specific frame within those other pages. Is there any way to handle that inside of Edge Animate?
-
WARN kodo.jdbc.Schema - Existing column "JDOID" on table
Sorry, I've posted this before and never got back with some debug. I'm getting WARN kodo.jdbc.Schema - Existing column "JDOID" on table "<TABLE NAME HERE>" is incompatible with the same column in the given schema definition. I running kodo.jdbc.meta.