The keyword bind seems to BE a bug

Anyone else noticed that "bind" contains that many bugs that one might even say it IS a bug? It's just terrible. Sometimes it matters on which line in the code I write it, no matter if the other lines affect the data behind the bound variable.
Also I tried to make a media player. I looked at the example code at http://javafx.com/samples/DraggableMP3Player because mine didn't work. They used almost the same code, but there it worked, and at my code it didn't. Because the MouseEvent-variable returns such strange values for x. I think they work with bind, too, internally.
JavaFX would be well usable - if it wouldn't be a bug.

In general, bind works well. I saw many messages in this forum with problems with bind. But all the time, the problem was in a wrong usage, bad understanding on how it works. I don't blame users, it isn't as simple/intuitive as it seems on first sight... But the bind mechanism works quite well. Bugs are not impossible, of course (that's software, after all), but not that numerous (or obvious!).

Similar Messages

  • Bug with Lightroom 4? - Big problem in the keyword list!!

    Hello guys,
    I am Rafael Rojas, a nature and landscape photographer. This is my first post, trigered by a quite bothering problem I am having with my LR...So hello everybody!
    I upgraded to LR 4 a week ago. Today I realized many of the keywords I have installed in Lightroom do not appear on the keyword list (basically all keywords after the letter S). Moreover, half of the keywords which appear on the list are not editable: that is, I cannot assign them to the selected image (by clicking on the left box), or I cannot double click them or right click them to get the Edit panel. All the rest of keywords (those which appear on the list on top), can be edited and there is no problem.
    When I export the keywords as a .txt file (in metadata, export keywords) I can see that all the keywords are there. When I try to write some of them on the box LR recognize them and adds them automatically. However, I just cannot see them on my keyword list or just cannot edit them.
    The reason I want to edit the keywords is because many of them got desactivated while upgrading (something more people have reported). Right now, I cannot send my images to my stock galleries, since many of my important keywords are not active, and I just cannot edit them...
    Can you help me please?
    thanks so much!!
    rafael

    Well, 64 bits.
    And yes, it seems when I erase one keyword, the list "shows" one more below...so it seems the problem is related to a certain limit in number.
    That would be still a problem I could live with, the big problem tough is that many of the keywords got "deactivated" alone by Lightroom (see problem here described http://www.backyardsilver.com/2012/02/strange-behavior-with-capitalized-keywords/) and that means I NEED to edit some keywords which are really important and which are not active. Otherwise, when I export the images those keywords are not embedded...
    Any thoughts?
    Rafa

  • Bug - Safari 5.1.5 breaks the keyword search of PDF files displayed on Safari

    Bug - Safari 5.1.5 breaks the keyword search of PDF files displayed on Safari.
    After updating to Safari 5.1.5 with Adobe Acrobat Pro 10.1.3 on Mac OS X 10.6.8, it is not possible to search for keywords in PDF documents displayed on Safari.
    I understand that it is a bug. Is there any way to fix it?
    Thanks.

    Hi...
    Try deleting a plugin...
    Open the Finder. From the menu bar click Go > Go to Folder
    Typs this:    /Library/Internet Plug-Ins
    Move the Adobe PDF Browser plugin  (or PDF Browser plugin) to the Trash.
    Quit then relaunch Safari to test.
    If that doesn't help, back to the Finder menu.
    Go > Go to Folder
    Type this:  ~/Library/Caches/com.apple.Safarfi/Cache.db
    Move the Cache.db file to the Trash.
    Quit then relaunch Safari to test.

  • New photoshop cc seems to have a bug wrt the toolbar's foreground and background squares.

    New photoshop cc seems to have a bug wrt the toolbar's foreground and background squares. When I pick a color to use as a fill the squares show gray and the fill is gray rather than the color picked. Never had a problem with this in previous version of PS. Could something be set up or initialized to cause this state of affairs?

    Change your document from Grayscale to RGB, or change the selected channel to the RGB data instead of a mask.

  • Can't drag keywords to top level in the keyword HUD

    After having imported my iPhoto library into Aperture 3, I found the keyword HUD cluttered with all of my 300+ keywords, many of which were duplicated. No idea why that is, but anyway. Some of them now live on top level, some on second floor under the main keyword "iPhoto", some of them are duplicates, some are not. That's the situation.
    So I want to (a) drag some of them to first level, (b) build my own hierarchy, and (c) consolidate those duplicates that are alloted on separate levels. Now I find myself in trouble. Technically, I can drag any second level keyword from one to another first level keyword, but then they remain always on second floor. I find no way to move it to *first level* in the HUD.
    I know that this can be done when the keyword HUD is almost empty. In that case, I drag it to the bottom of the list, see a white border pop up around the HUD, and let go. Simple. But not when the HUDs filled up to the brim?
    Am I missing something?

    OK ... but you're gonna groan. This is, btw, a long-standing bug (but still an excellent question).
    Use the search field to search for the keyword you want to move.
    Take advantage of the now empty space in the Keyword HUD to move the keyword.
    Clear the search field.
    Note that if you set up a well-organized hierarchical keyword list (which seems to be your goal), you can use the other work-around, which is to collapse all levels of the outline.
    You might find these remarks on merging duplicates helpful:
    http://discussions.apple.com/thread.jspa?messageID=12399717&#12399717
    Message was edited by: Kirby Krieger to correct typos -- sorry, seems the coffee hasn't reached the fingertips.

  • The Keyword.URL function keeps resetting to a different value.

    I just downloaded Firefox 4, and normally what I would in Firefox 3.6, I would type a keyword in the URL bar. And it comes up saying that I'm searching using:
    jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.properties
    I don't know where that came from, so I opened about:config, went to keyword.URL and switched to Google.
    Okay, it works now. I exit it, and I later on opened it back up. I put in a word again. The same thing came up from when I started:
    jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.properties
    I try fixing it again. It works now.
    It seems the problem is the keyword.URL value keeps resetting, but I don't know how it got "jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.properties" to appear on it.
    So, is this just a bug on Firefox 4, or am I just the only one experiencing it? And if so, how can I solve this problem?
    I know I have like two other search engines available for use on my browser, but I mostly use the URL bar to search. Any solutions?

    How can we get someone from Mozilla to correctly answer these questions instead of people like us? No offence, but there are different answers to this question all over the net and none of them are right. It is frustrating enough at time to drop Firefox altogether.

  • How do I filter photos using the keyword hierarchy?

    Since Aperture 3.1 came out, I've been taking another look at it and considering switching back from Lightroom. One baby step was to set up a proper keyword hierarchy with Aperture. Trying to use that for sorting photos, I started feeling incredibly frustrated and felt like I must be missing something screamingly obvious.
    Here's my issue. Using the keyword HUD, I can set up a nested, hierarchical keyword list. The HUD helpfully displays a running tally of all photos that keyword is applied to. "Great!" I thought, I've got 46 photos of John Smith, let's take a look at them. So I click on the number. Apparently, while Aperture is happy to show you the number of photos with the keyword, it's not willing to take you to those photos (i.e., create a library filter and show the results) via the Keyword HUD.
    Bringing up the filter HUD seems unhelpful for the opposite reason. While you can search via the keywords there, it doesn't show the keyword hierarchy! Am I missing something? Say I've got keywords for two people, Adam and Zoe, filed under People/Friends/. Using the keyword box in the filter HUD will list one at the beginning and the other at the end of my entire list of keywords. Worse, the filter HUD only seems helpful for keywords if you know which ones you're looking for, which defeats the point of using a hierarchy. If, say, I know there's 3 or 4 people I'm looking for under a particular category, but I can't remember their name of the top of my head, how do I go about finding them using the filter HUD? All I have is the long, uncategorized master list of keywords.
    Again, I feel I must be missing something obvious. Thanks for your help.
    Cheers.

    I agree, clicking on a keyword in the HUD that has a number after it to get those photos seems like a no brainer. Even though I know it doesn't do that I still find myself clicking on it before I catch myself. Need to send feedback to Apple on this, clicking on a keyword should create a filter to and display those images.
    In your example the images of Adam and Zoe should be tagged with the keywords that apply to them. That is they would have the keywords people, friends, male or female, Adam or Zoe, and whatever other keywords you use to describe these images. Then you check as many keywords in the filter that apply and you can remember.
    While the keyword HUD shows the keywords in a hierarchy, keywords applied to an image are one dimensional, linear. Its just a string of words without structure. The hierarchy is just there to make it easier to conceptualize the structure.

  • I have the CC Master Collection, I am experiencing bugs in version 18.1.0.

    I have the CC Master Collection, I am experiencing bugs in Illustrator version 18.1.0.
    It appears I do not have Illustrator CC2014.1 (can't tell since you don't list the version number anywhere!), but I can't seem to download it. I go to the download page from the link in this forum and nothing downloads, It just says it is downloading. I get the CC widget from my mac menu poping up, and it says all the Apps are up to date. I had a colleague who had a problem of CC saying CC Acrobat Pro was up to date when it clearly was not the current  X.x.x version, I am thinking this may be a problem here as well.  I really need to talk to someone I think, but there seems to be no way to get to a chat or live person. This seems like pretty bad service so far...
    The bugs I am seeing is I can  not set a line wight to less than 1 pt. and the items o move around seem to be snapping to a pixel sized (1/72 in) grid instead of where I actually move them. I have confirmed the snap to grid is off in the menu. I can also not set the key increment move meant to more than 2 decimal places. In CS6 I could go 3 decimal places.
    What the heck is going on, and doesn't recent purchase of the Adobe CC Master collection rate something more direct than a forum?
    Britt
    Just found the answer to some of my issues. The Alight to pixel grid command was on (what a painful feature to be on by default!) "When I select .25 line width, the line width defaults to 1 pt., how do I fix that?"
    Now if I could just confirm if I am current with the Program version...

    NASADeploymentsETLA wrote:
    What the heck is going on, and doesn't recent purchase of the Adobe CC Master collection rate something more direct than a forum?
    hah!

  • The deployment process seems to die or get stuck, iAS 6 SP3 for Solaris 8?

    When I deploy my application in iAS 6 SP3 for Solaris 8 the deployment process seems to die or get stuck. In the shell window i get the messages
    iasdeploy for iPlanet Application Server 6.0 SP3
    Connected to LDAP server on sstu15.auto.com port 389
    iPlanet Application Server is running in international mode
    sstu15:null
    sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
    sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
    After this nothing happens for a really long time.
    When starting the deployment I get in the beginning of kas.log two entries
    ADMIN-168: kas> deployment get log ''J2EEInstallEar''
    GDS-007: finished a registry load
    but suddenly the second line disappears and the only message I get is the first entry. I need to break the deployment process and kill the processes manually.
    When starting the application server I get two error messages:
    Connected to LDAP server on sstu15.auto.com port 389
    iPlanet Application Server is running in international mode
    Connected to LDAP server on sstu15.auto.com port 389
    iPlanet Application Server is running in international mode
    iPlanet Administrative Server
    Version 6.0 SP3, Build 20010704
    Copyright (c) 1996-1997 KIVA Software Corporation.
    Copyright (c) 1998-1999 Netscape Communications Corporation.
    Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp
    . All rights reserved.
    Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
    [14/Feb/2002 11:02:12:7] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
    [14/Feb/2002 11:03:08:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
    I think all processes starts OK, I get one for .kas and one for kas, one for .kxs and one for kxs and finally one for .kjs and one for kjs.
    Is someone familiar with this/these problem(s)?

    It seems you are deploying a very big application. Try to deploy this application with following command
    j2eeappreg <filename>
    It should work fine. It was a bug with iasdeploy command in iAS SP3 which had been fixed in iAS SP4.

  • "Preview" history, I am running lion and when I double click on the preview icon in the dock, it seems to be showing me the history and not the "minimized" images only

    When I am running "Preview" of  few images and minimized 1 of them, if I double tap the tracking pad, magix mouse etc..., the gesture should show me what is currently open, the upper part of the screen and what is minimized,  in the lower part of the screen.  Instead,  I get a lot of images at the bottom part along with the minimized images, it seems like it is showing me the history files as well.  Is there anything I can do to fix this?  Can I erase the history of "Preview"?
    Thank You

    Another bug or new stupid apple design....
    I tried everything including setting no history in the General control panel. I also removed the reopen window that I don't like by default....
    But it seems impossible at all... It is part of the very bad design introduced in Lion. Lion is the Vista made by Apple.

  • Why can I no longer find my podcast under the keywords in my feed?

    We're having problems with our podcast showing up on itunes. A few weeks ago, our podcast just stopped appearing under the proper keyword searches. Our podcast is called Sequence Break XIV and out itunes url is: http://itunes.apple.com/us/podcast/sequence-break-xiv/id455566304
    The keywords you should commonly be able to find us under are FFXIV, Final Fantasy XIV, and Final Fantasy. Not only is our podcast no longer under those search terms, but almost every podcast that used to be under the search term "FFXIV" has disappeared except for two.  It really just looks like something is buggy here. When you first search for "FFXIV" for example, the screen that pops up shows all the different media you can look under. The "Podcasts" section shows a preview of three podcasts. Yet when you click on the podcasts section, only 2 podcasts show up. So something is wrong here.
    Our feed can be found at http://zantetsuken.net/feed/podcast
    We haven't changed the feed details at all besides episode updates. We really need to know what's going on ASAP. Although our podcast comes up when you search for things like Sequence Break XIV or SBXIV, or terms that specifically deal with our podcast, the most important terms that I mentioned earlier (FFXIV, Final Fantasy XIV, and Final Fantasy) don't show us at all. It only seems to affect the most popular and most important search terms. But all those terms are in the keyword field are on our feed. New listeners interested in Final Fantasy XIV won't be able to find us this way.

    I still can't see it. I had two other people try to look it up and they can't see it as well. This has been tried in WIndows 7 and Mac OSX. Both with fully updated iTunes applications. I'm also worried about the other keywords associated with my podcast not bringing it up either. Searching FFXIV only brings up the first two podcasts for me. Searching Final Fantasy XIV brings up a ton of podcasts, but ours isn't listed. Here's a screenshot of what I'm seeing when I search for FFXIV.

  • Anyone else finding that the keyword editor doesn't refresh properly upon changes

    When I have a clip with multiple keywords and I want to delete one of the keywords in the keyword editor, I find that the editor window refreshes incorrectly. The results are accurate but the editor appears to erase the wrong keyword.   Not the worst bug, but annoying.  It reminds we of the refresh problems in the browser when applying custom names 10.1.

    but any time I do a find for a certain keyword,
    Try the find menu (edit/find or cmd+F). In Source choose your main folder all your files are in. Criteria choose keyword and fill in one of the keywords you want.
    Be sure to have a checkmark in fornt of the options 'Include all subfolders' and 'include Non indexed files'.
    Hit find and let Bridge do it's searching. This first time may take a bit long but now Bridge starts indexing all files. After this you should be able to use the option for finding keywords as normal.

  • Can't create multiple dependent LOVs from the same bind variable

    Hi all,
    I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
    The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
    <iterator id="SelectStaticQueryViewObjIterator"
                  Binds="SelectStaticQueryViewObj" RangeSize="-1"
                  DataControl="DMSApplicationModule1DataControl"/>
    <invokeAction id="refreshDynamicQuery1BindParameter"
                  Binds="ExecuteWithParams1" Refresh="prepareModel"
                  RefreshCondition="#{empty requestScope.VariableChanged}"/>
    <iterator id="SelectDynamicQuery1ViewObjIterator"
                  Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
                  DataControl="DMSApplicationModule1DataControl"/>
    <invokeAction id="refreshDynamicQuery2BindParameter"
                  Binds="ExecuteWithParams2" Refresh="prepareModel"
                  RefreshCondition="#{empty requestScope.VariableChanged}"/>
    <iterator id="SelectDynamicQuery2ViewObjIterator"
                  Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
                  DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
    Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
    Thanks
    George

    Hi all,
    Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
    Cheers
    George

  • In the process of reformatting my macbook pro, I saved everything but my keyword list.  The keywords are with the images, but the total list I use under "Keywords" is not present.  Is there a way to re-create all my keywords I've used over the last 6 year

    In the process of reformatting my macbook pro, I saved everything but my keyword list.  The keywords are with the images, but the total list I use under "Keywords" is not present.  Is there a way to re-create all my keywords I've used over the last 6 years.

    I accomplished what I needed last night.  I remembered I had picked my favorite images from each year and put them in a "favorite" folder by year.  These folders included 500 to 1200 images per year.  I pulled up the folder for each year and highlighted all images and clicked on "Keywords" and all keywords used for all images were listed.  I made those keywords persistent.  It took me a while to realize I had to click on each keyword to make it persistent.  After doing this for all years, I assume 95% of all keywords I have used over the many years were back in my list.  I'm sure there is probably a more "technical" way to accomplish what I needed, but this seems to have worked.  I also exported my list into a word document and is saved on my hard drive.
    If I had not made folders with my favorite images for each year, I could not have used this method, so if you figure out a better way, I like to hear it.  Thanks for your comments and willingness to help.

  • Lifecycle issue with table binding + read-only attributes: ADF BUG

    Hello all,
    I have found what I believe to be an easily reproducible bug in ADF that reproduces in 10.1.3.x, but not in 11g (at least not in drop 6). The best way to describe the bug would be to walk through a simple set of steps to reproduce the bug:
    1). Create a new application (ADF BC + ADF Faces).
    2). In the model project, create a new Entity Object from the Employee table in the default HR schema. Allow JDev to create an updatable view object and an AM as well.
    3). Put a validation rule on the first name attribute of the EO (can be anything, really - I made mine so that the first name cannot be "foo").
    4). Test everything using the BC tester if you like.
    5). In the UI project, create a new JSPX page.
    6). Drag the updatable VO on to your page as an updatable af:table.
    7). Put an af:commandButton on the page. Bind its Action or ActionListener to a method in a new backing bean. Put some simple code (I used System.out.println) in the backing bean method.
    8). Run the jspx page.
    9). Put some invalid data in (e.g. "foo" in the first name field) and click the af:commandButton. Verify that you get an error message and that the Action/ActionListener method DOES NOT fire. So far, so good.
    10). Now, to demonstrate the problem. First, look at the page definition for the jspx file. Identify the first attribute that is mentioned (in my case, it was the employee id).
    11). Go to the updatable view object and make the attribute from #10 read-only or updatable when new only.
    12. Now, repeat step 9 - you should see the error message AND also see that the Action/ActionListener method was executed. You will also see in the messages window that ADF attempted to set the value of the read-only attribute, and thus got a ReadOnlyAttrException.
    This issue only happens if the first attribute mentioned in the table binding is read-only. A workaround would simply be to re-order the attributes in the table binding of the pagedef so that the first attribute isn't read-only.
    Don't ask how I figured this out ;)
    Best,
    John

    Hi Frank,
    Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
    It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
    At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
    John

Maybe you are looking for