The Lenovo Z50-75 has a faulty display

Hello, I just got back today after picking up a Lenovo Z50-75 laptop. Just after starting it up I upgraded to Windows 10, while I was working. When it finished It started up with my own lock screen wallpaper and I noticed some colour banding issues. I figuired it was a driver problem, and needed to update. This was NOT the case. I was truly sad to see that this laptop suffers from a serious and even more importantly a KNOWN fault. Clearly the display is not accepting 32-bit color and this results in the color banding that was extremely evident on the display. Now the worst part is that Lenovo apprarently do not care about this issue, or for some reason think that tilting a display can affect the color bit, which is ridiculous. I want to make this as clear as possible. Lenovo have not just lost a customer for life, but being apart of the tech industry myself, I get asked a lot on which brand to choose, to which I will always tell people to avoid Lenovo. I should have done better research on this issue before purchasing, but i'm still treuly gobsmacked by Lenovo's repsonse and overall stance on this issue. You actually locked out the original thread about it as well. Your simply disgusting. The laptop has already been packaged up and goes back tomorrow, and like I said before, I will never buy a Lenovo product again, and not because I'm afraid of a fault, but because your support is clearly terrible and you don't make reliable prodcuts. At least not prodcuts your willing to stand by.

Okay, I have done some research on this issue. To be honest, it really got to me how something like this good happen in the first place.
Anyway.
Upon checking out some other color banding causes, I came across other users with HP laptops/tablest that had the exact same issue as described above.
The correlation here is that both devices use two froms of graphics, with an lower spec internal and a higher spec dedicated. Exactly like the above laptop.
It seems the graphics card did not enable dithered mode when signalling the 6-bits with the monitor, which uses this method for true color. A common technique for cheaper panels.
The point being is that this issues is nearly identical with too many correlations to ignore.
The HP laptop issue was solved with a bios update, which means it was a driver issue or technically a bios issue.
Does Lenovo care to comment on this. Since a different manufacturer had the same exact issue, and was able to fix it. It clearly shows that Lenovo were wrong, and really were trying ignore the fault.

Similar Messages

  • Lenovo H520s "Lenovo Service Partion has been destroyed".

    Hello all,
    Yesterday, an error started to appear on my H520s saying that the lenovo service partion has been destoryed. The only option I have to clik is OK, and each time I press it, it simply says Can not find script file "X:\onekey\main\Irscall.vbs". Then I clik the OK again, and it seems to restart the computer.
    I have tried entering the BIOS many times, and figured out it was "F1". The problem is, I cannot access my operating system, and what's worseis that it is Windows 8, and it came pre-installed on the computer.
    The problem with Windows 8 is I can't access boot manager to use a recovery disk, or enter safe mode without actually having to enter the operating system.
    I have looked around the forums and many other websites, but it seems all those with this same problem, have Windows 7.
    No recovery disks came with the computer, but I do have 2 recovery disks and a recovery USB, that I made a while after I got the computer, which I got about 1 week ago, and is still brand new.
    I also have an external hard disk which contains my backup, that goes by the name "Seagate Backup".
    Do you guys have any solutions, if so try and make sure it's for Windows 8 not Windows 7.
    Thanks,
    Lavendar

    Similar problem with me here with similar machine and I seev you have been waiting for an answer for 4 months!!
    http://forums.lenovo.com/t5/Lenovo-3000-and-Valueline/Lenovo-service-partition-destroyed/td-p/114610...

  • My 4th gen ipod touch has crashed, just displaying a dark blue screen.  It won't turn off or do anything.  Connecting it to the laptop does nothing either.  Is this common and any ideas??

    My 4th Gen ipod touch has crashed, just displaying a bark blue screen.  It will not turn off or respond to any buttons being pressed or held for a number of minutes.  Connecting to the laptop does not help either.  Has anyone had this happen on their i touch or have a solution??
    Thanks

    If not successful, try the remaining actions of:
    iOS: Not responding or does not turn on

  • How to display a mssg on page before the adf lifecycle process has ended?

    Hi;
    We have an ADF Application(11.1.1.3). We sign a document with a mobile signature. To do this we use a webservice call. During this call a hash is generated for the user to check and sign the document. Everything is fine but we couldn't find a way to display the generated hash on the page before the adf lifecycle process has finished. The hash should be displayed on the screen while the rest of the method is proceeding. After 2 minutes, the hash is timed out. How can we do this?
    The method is as follows:
    public boolean docFirstSign(String telNo, int gsmOperator, String evrakNo) {
    String filePathToSign = null;
    boolean signOpResult = false;
    FileProcessor fileP = new FileProcessor();
    try {       
    filePathToSign = fileP.getFilePathToSign(evrakNo);
    byte[] imzalanacakVeri = MobilImza.getBytesFromFile(filePathToSign);
    String dataToBeDisplayed = "Size atanmis ve evrak uygulamasi uzerinden goruntulediginiz "+ evrakNo +" numarali evraki mobil olarak imzalayacaksiniz!";
    MSS_SenderSoapProxy proxy = new MSS_SenderSoapProxy();
    HashResult res = proxy.getHashForGsmOperator(imzalanacakVeri, telNo, 1);
    Here the hash is generated. This should be displayed on the page, as at the same time a mobile message is sent to the user to check it and sign it. And the method shoud go on processing.
    Logging.getLogger().info("Message -->"+res.getMessage());
    //Hash kontrol
    if (res.getResultCode()==0) {
    SignatureResult sres = proxy.getSignature(dataToBeDisplayed,res.getApTransId()); //Turkce karakter olmayacak
    Logging.getLogger().info("sres.getResultCode()-->"+sres.getResultCode());
    if (sres.getResultCode()==0) {
    byte[] imzaliData = MobilImza.base64Decode(sres.getSignedData());
    System.out.println(sres.getMessage());
    FileOutputStream fos = new FileOutputStream(new File(filePathToSign));
    fos.write(imzaliData);
    fos.close();
    signOpResult = fileP.docCheckin(evrakNo);
    } else {
    fileP.cancelCheckout(evrakNo);
    } else {
    Logging.getLogger().error("Hash Hesaplanamadi");
    fileP.cancelCheckout(evrakNo);
    return signOpResult;
    } catch (Exception e) {
    e.printStackTrace();
    fileP.cancelCheckout(evrakNo);
    return signOpResult;
    return signOpResult;
    }

    Hi,
    its a synchronous method execution which means that the display of a popup only works when there is a response to the initial request. What about - as soon as you generated the Hash - show a popup to the user asking him/her to take a note of the hash and then confirm that the document or whatever you want to sign and send to the mobile should be processed. So when the user clicks ok on the message dialog you continue with the remaining of your method
    Frank

  • T500 (2056-4SU) Has Disappeare​d from the Lenovo Support Site

    Anyone know why all of a sudden the T500 2056-4SU has vanished from Lenovo Support. Does anyone actually think they are working on the video driver problems and have pulled that page in the meantime??
    If anyone has feebback please let me know.
    Thanks in advance,
    Brian G.
    T430s (current), T420s, ThinkStation S20

    Don't know, maybe a glitch?
    If you are looking for T500 drivers you can get them here.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • The home button on my iPad has became faulty, it works sometimes although you have to press it really hard. Can Apple fix this for me?

    The home button on my iPad has became faulty, it works sometimes although you have to press it really hard. Can Apple fix this for me?

    They might be able to. If it's an iPad 2 then it is still within the warranty period, so as long as it's due to accidental damage it might be fixed/replaced free of charge. Have you tried contacting Apple ? I don't know what country you are in, and whether you are near an Apple store, but you could try looking on this page for your service options.
    Before you do that you could try a reset and see if it that helps : press and hold both the sleep and home buttons (assuming that it works) for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Has anyone deleted the Lenovo Store app on an A1?

    I have no desire to use the Lenovo app store and I would like to delete the app which isn't a problem given that I have root access and the appropriate tool for deleting the app.
    My only concern is what will happen to the toolbar on the bottom of the launch page since it includes a shortcut for launching the Lenovo Store app...does that shortcut just "disappear" , is it replaced with a different shortcut, is the shortcut permanently stuck on the toolbar as a dead shortcut, or is the shortcut just replaced with a blank area, or what?
    Hopefully someone has already done this and can provide some feedback which would be appreciated.
    thanks
    *Smith & Wesson...the original point and click interface*
    Solved!
    Go to Solution.

    xwray wrote:
    Thanks...does the toolbar (and thus the shortcut) remain if you switch to a different launcher or will the new launcher now control the entire screen including the toolbar area? Or, is the toolbar a permanent fixture no matter what you do?
    I use the GO Launcher and the GO Locker. The toolbar becomes totally user definable. You can put anything at the bottom that you want. Very easy to use, and fairly intuitive. I have not found a way to get rid of the Lenovo App Shop. Pity.
    BTW Go Launcher and Locker are free. You might also want to check out the GO Keyboard. Yes I know we have that, but it is customized for Lenovo, I like the standard GO Keyboard much better.
    IdeaPad A1-07
    iPhone 3GS

  • TS3048 My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey is ask the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook .

    My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey step show on the screen the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook before. Mouse, iphone and other bluertooth devices have no problem pairing via bluetooth. Any suggestions where to look?

    I read somwhere that firefox disables certain versions of java because it might give control of your computer to other malicious websites
    I think you have to go to the java website and down load the version you need and enable it in firefox's prefrences
    Sorry I may be a veteran in using firefox, but I know very little since I hardly had problems with mozilla untill just very recently hope this helps

  • My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

    My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

    To make sure that this is not software related, set it up as new device, explained in this article:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • Is the Lenovo G400 has a light on power button when turn on?

    Is the Lenovo G400 has a light on power button when turn on?

    I have already this problem ,I buy a G400 S but during turn on I do not know the power button LED light must be illuminated or not...

  • How do I display on the opening screen on Adobe Acrobat (Windows) version 9, the task bar that has "File," "Edit," etc--it's vanished

    How do I display on the opening screen on Adobe Acrobat (Windows) version 9, the task bar that has "File," "Edit," etc--it's vanished. Slobberdog

    Hi slobberdog,
    Please check out this post regarding the same issue in Acrobat 8. The solution applies to Acrobat 9 as well: How do I restore the PDF menu bar (File-Edit-View)?
    Best,
    Sara

  • My Iphone 4 screen has gone blank... If someone calls the person gets full ring but no display on my screen... niether home button nor power off button is working... help!

    my Iphone 4 screen has gone blank... If someone calls the person gets full ring but no display on my screen... niether home button nor power off button is working... help!

    Try press and holding down the Power and Home button until you get an Apple icon on the screen.
    http://support.apple.com/kb/ts1445

  • My iphone has locked up displaying a received text message and also a radio station app.  I can't get it to restart by pushing and holding the on/off button.  Any suggestions to try?

    My iphone has locked up displaying a received text message and an app playing a radio station.  I can't restart the phone by holding down the on/off button.  Any suggestions to try?

    Hold the home button and the Sleep/Wake button ignoring the slide to power off message until the phone turns off then you can repower it by pressing and holding the sleep/wake button for a few seconds until the apple logo appears.

  • I connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden

    i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Lock symbol appearing next to top right power percentage display after rebooting the ipad. Anyone has answer to what went wrong. Thank you.

    Lock symbol appearing before next to the top right power % display after rebooting the ipad. Anyone has answer what went wrong? Thank you for your help. 

    You have enabled Rotation Lock.
    http://support.apple.com/kb/HT4085

Maybe you are looking for

  • LCD TV as a broadcast monitor?

    Hi all, Was planning on buying a Cinema Display to do a 3 display setup: 1 - Macbook Pro - library/media 2 - Apple Cinema Display - timeline 3 - LCD flatscreen TV - monitor Is it possible to use my LCD tv as a broadcast monitor. I`m assuming I would

  • I need some simple examples to start with for Oracle ESB

    Hi All, Please share some simple examples to startwith for Oracle ESB. I need to understand, what are the files are created, once created an ESB project. What is the use of the files how to edit them with out using JDeveloper. Iam trying to create a

  • How to synchroniz​e with RTSI?

    Hi all  I am working with  2 PCIe card (#6351 and #6536) connected via RTSI. The bus RTSI permit to solve 2 critical problems in my application: simultaneous triggering and synchronization For the synchronization, I would like to generate a rectangul

  • Messages on my macbook

    I was asked on my messages on the macbook air if I wanted to add my phone number. I accepted it but now I want to take it off and only use my email on the macbook. How do I do that?

  • Two Files, Same Links, Different Blues

    So this is bizarre. I sent logo files to my client in all different formats (ai, eps, pdf, etc). They assembled the files onto one PDF, then commented on how different the blues looked across the formats, especially the PNG when compared to the AI Pa