The name of this class conflicts with the name of another class

I had a problem when compiling my flash movie. I had made an
instance from a class, but the output kept saying:
"The name of this class, XXX, conflicts with the name of
another class that was loaded XXX."
I read a lot of developers have the same problems, when i
looked it up:
Google
link on : "conflicts with the name of antother class that was
loaded"
Apparently it is some kind of bug caused by different times,
between local/network machines and servers.
Also when there is a time difference involved between 2
computers, then this problem also occurs.
Can't macromedia fix this bug? .....Because as a developer i
don't want to adjust my time, everytime i want to test my flash
movies or have to compile my movie 2 times. The other developers
are getting tired of it also.
We need to get this bug trough to macromedia or adobe!
It needs to be fixed!

Can anyone help?

Similar Messages

Haskell-x11-extras conflicts with a required package?

I've been using Xmonad for a little while now, and have recently aquired a second monitor, so I read up on how to configure dual head setup. It seems I need to install haskell-x11-extras before reinstalling xmonad. I use yaourt to do this, and it builds OK with the exception of a few warnings about depricated use of defaultUserHooks (safe to ignore this?). When it starts to install an error states that this package conflicts with haskell-x11. So I remove haskell-x11 and try to install haskel-x11-extras again from the .pkg.tar.gz but then I get an error informing me that it requires haskell-x11 !
So I'm stuck in an infinate loop and may have inadvertantly broken time & space. Sorry about that
Anyone know how I can fix this? My goal is to use xmonad in dual head setup so if there is another way that avoids the extras package altogether, then I'd like to hear it please. So far, my mouse pointer can traverse to the second screen and back again but I can't send any apps over to it.
i'm at work at the moment using an inferior operating system, so the above was from memory but if anyone needs me to post the exact ouputs I'll do it when I get home in a few hours.
Thanks

I can confirm the conflict between gnutls and autogen. Got the same error on "-Syu". My workaround for right now is to wait for either a new gnutls or autogen.
Edit: I'm x86_64 if that makes any difference.
Last edited by headkase (2012-02-20 09:20:35)

SAPGUI 710 in conflict with Internet Explore 7.0

My SAPGU 710I this in conflict with the Internet Explore 7.0 For example the F1 command helps this not display the aid and yes a pagina of interner with the message the pagina cannot be shown. Already I installed varios patchs follows the ones that I installed gui710_1-10002995.exe gui710_2-10002995.exe gui710_3-10002995.exe gui710_4-10002995.exe and bw350gui710_1-10004473.exe. Exactly installing these pachs I continue with the same problem I do not know more what to make they passed therefore and can help me?
Sorry for my english.

HI Manas
The problem is that in our company the IE7 the upgrad and removed the
IE6 for all users is more than 500 users does not have as to come back toward the
IE6 and yes to find the solution for this therefore has that to exist with IE7.
Tanks for help.
Sorry my english

What is the name of this class?

I have a JTable which is instantiated like this:
"class table2 extends JTable {
private int rows = 100, cols = 8;
private Object[] rowData = new Object[cols];
When I try to refer to it as "table2," I get a null pointer exception.
My questions:
What is the name of that class?
Is there a way to reference it as "table2"?
Many thanks in advance.

Hello
I might have the answer to your problem but firstly, is that all the code there is? For example, where is the constructor for your class?
In answer to your questions:
1. You cannot reference an object until it has been created (this might explain the NullPointerException)
2. To reference it as "table2" you would do something like this:
table2 table2 = new table2();Looks a bit confusing... :(
You should start class names with capital letters and also choose a general name for the class like this:
MyTable table2 = new MyTable();
MyTable table3 = new MyTable();and so on.
Post another message if you need more help.
Regards
Daniel Lam

Verify that this class has been marked with the @Entity annotation

Hi,
We have a App level shared lib which does all the JPA related query for an app. And each app can utilize the share lib to get the JPA related query to be done.
For scoping the JPA between App . We have created EMF for each app.
When one app run and does any JPA related action it works fine , but when we try to run second app we are seeing the following error when trying to do JPA specific action .
the @Entity annotation.
[2012-05-23T04:08:16.839-07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.spaces] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] [[
java.lang.IllegalArgumentException: Unknown entity bean class: class oracle.webcenter.spaces.internal.repository.WcSpaceHeader, please verify that this class has been marked with the @Entity annotation.
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)
at oracle.webcenter.spaces.internal.repository.SpaceRepositoryUtils.refreshSpaceRows(SpaceRepositoryUtils.java:1791)
Where WcSpaceHeader is an Entity.
For creating emf per App this is the code
private static EntityManagerFactory getEntityManagerFactory()
String appName=Utility.getApplicationName();
EntityManagerFactory emf=sEntityMgrFactory.get(appName);
if(emf==null)
emf=Persistence.createEntityManagerFactory("SpacesReposPUnit");
sEntityMgrFactory.put(appName,emf);
SpacesConstants.LOGGER.info("Caching" +
"EMF for " +appName);
return emf;
My persistence.xml
<?xml version="1.0" encoding="US-ASCII" ?>
<persistence xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
version="1.0" xmlns="http://java.sun.com/xml/ns/persistence">
<persistence-unit name="SpacesReposPUnit" transaction-type="RESOURCE_LOCAL">
<provider>
org.eclipse.persistence.jpa.PersistenceProvider
</provider>
<class>oracle.webcenter.spaces.internal.repository.WcSpaceHeader</class>
<class>oracle.webcenter.spaces.internal.repository.WcSpaceUsrDetail</class>
<class>oracle.webcenter.framework.service.jpa.WcCommonXlationEntity</class>
<class>oracle.webcenter.spaces.internal.repository.WCNavigationActivity</class>
<properties>
<property name="eclipselink.session.customizer"
value="oracle.webcenter.spaces.internal.repository.SpacesEclipselinkSessionCustomizer"/>
</properties>
</persistence-unit>
</persistence>
One more problem i am seeing in this is that . When i create an EM from EMF (which is diff for diff app) and doing some query i am getting a class cast Exception.
(self-tuning)'] [ecid: 5825b814-2931-4ad5-8dc3-3e18f66992b7-00000004,0] [APP: webcenterCustom] [[
java.lang.IllegalArgumentException: Unknown entity bean class: class oracle.webcenter.spaces.internal.repository.WcSpaceHeader, please verify that this class has been marked with the @Entity annotation.
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:648)
at org.eclipse.persistence.internal.jpa.EntityManagerImpl.find(EntityManagerImpl.java:532)

This is a class loader issue, somehow you have deployed the same classes in two places, so have two different versions of the classes.
How, exactly have you deployed things, where are your domain classes?
The issues is most likely that,
Persistence.createEntityManagerFactory("SpacesReposPUnit");
will always return the same factory once it has been deployed.
If you pass a properties map to createEntityManagerFactory and set the property "eclipselink.session-name" to a unique value, then you should get a new factory.

Conflict with the component names

Hi everybody,
I think I have a conflict with the names of the components. Let me explain to you.
On the first window, I have a component described like this :
Component Type -> Text Input Component
Component Name -> ArgoLineClientV2R4_Text_1_txf
On another window, I have this :
Component Type -> Graphics Component
Component Name -> ArgoLineClientV2R4_Text_1_txf
As you see, these components have the same name but are different type. With the first, I manage to write the word in. With the second, I want to extract a word but I can't.
So, I would like to know the reason. Is it because the components have the same name? Is it because the second component is a Graphics component ?
Thanks for your time.
Best regards.
Romain.

Hi Oliver, thanks for your answer.
ArgoLineClientV2R4_Text_1_txf is the technical name, given by Jubula during the object mapping. In my program, I use different names of course.
These two components have different functionalities. With one, I write a word in; and with the other the software gives me an information (a word). With the second, i can only read the information and I need to take this information to put it in a String variable. So I tried to extract this information but I (my program) failed. I wanted to make a clic and make a copy of the word. But when I try to clic, my test fails.
I think it is because Jubula describes this component like a Graphics Component whereas in the software parameters, this component is a text field (in mode ReadOnly but a text field).
Here is my situation.
Regards.
Romain

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

For some reason when I shut down my computer then turn it back on, it comes back directly into my account, bypassing having to enter a password to get into my account. This works in direct conflict with the parental controls I've got set up. Any ideas?

Thank you so much for the quick response to my question. I tested your directions and it works!! Thank you. I would never have figured that out. I knew I had to go into System Preferences but would not have guessed that I needed to have Automatic Login set to off.

The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'........can someone give me a solution for this Error.

The DELETE statement conflicted with the REFERENCE constraint "FK_Equipment_Assets". The conflict occurred in database "WorkOrderSystem", table "dbo.Equipment", column 'AssetCode'

ya that's true row is referenced by another table.....but i want the row to referred by another table ,I don't know how to fix it
Actually this is not a C# issue. It is a T-SQl issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=transactsql
The above link should be posted.
Per my understanding, first you should
delete the record from the Foreign Table and then after you have to delete the record from the Primary Key table
Hope it helps you.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
Photoshop CC

Hi,
Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
Another option is remove extension manager database file, then launch Extension Manager to install it.
C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
/Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file.

"conflicts with the WAN IP address"

I just picked up a used AirPort Extreme N (Gigabit Ethernet) to replace my current non-Apple router, which has worked satisfactorily but lacks the ability to share disks--something I need. Using my G5 running 10.4.11, I downloaded AirPort Utility 5.4.2 to set up the new (to me) device, and did a factory reset just to clear everything out. I placed the AirPort in the network exactly where the old one had been--with its WAN port connected to the line supplied by my ISP (see below) and its three other ethernet ports connected to various clients. Then I ran into a problem:
Under the "Internet" icon of Airport Utility, I set it to Connect Using Ethernet, and Configure IPv4 using DHCP (My current router uses DHCP to provide IP addresss to both the wired and wireless devices on my network). The numbers below that are: IP address 192.168.1.12, subnet mask 255.255.255.0, and router address 192.168.1.1.
The first field of the line labeled "DNS Server(s)" defaults to 192.168.1.1, while the second field is empty, as are the fields Domain Name and DHCP Client ID. I left Ethernet WAN port on "Automatic" and put "Connection Sharing" on "Share a Public IP address," since I believe its combination of DHCP and NAT offer the best security.
The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?), I figured that I could play it safe and change the starting number to 192.168.1.13 to avoid the conflicts with 192.168.1.12.
But I still get the same error message when pressing "update." I tried changing the range to 192.168.1.50 - 192.168.1.60, and I still get the same error message. There seems to be no range that the utility will accept as non-conflicting with the "WAN IP address" of the Airport.
My ISP did not provide a visible modem as others in the past have done. The internet connection they left me simply comes out of a box on the back of the house that is connected by fiber optics to (presumably) a fiber optic line out in the street. However, this "supply line" has always worked fine with my non-Apple router and--after disconnecting the AirPort that had temporarily taken its place--is working right now as I throw this question to the forum.
Additional notes:
* Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
* While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Thanks for any assistance.

The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
This error message typically indicates that your 802.11n AirPort Extreme Base Station (AEBSn) is receiving a Private (as opposed to a Public IP address) on its WAN port. That could be because your ISP does not provide any device (computer or router), that is directly connected to their "box," with a Public IP address.
Your AEBSn is both a DHCP client (on the WAN-side) and a DHCP server (on the LAN-side). The Configure IPv4 is basically the on/off switch for the AEBSn's DHCP client. It's other option, PPPoE, would only be used if your ISP requires it.
One option would be to reconfigure the AEBSn as a bridge. This would disable both the AEBSn's NAT & DHCP services.
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?
The IP address information on (actually the TCP/IP pane) is showing you the AEBSn's WAN port settings. Settings that with Configure IPv4 set to Using DHCP would come from the DHCP server upstream of it. If this server was providing Public IP addresses then the values in both the IP Address & Router Address fields would not be in any of the three valid Private IP Address ranges (10.x, 172.x, or 192.x)
Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
This setting would not have anything to do with the error message that you are getting. Instead, this option is used as an on/off switch for the NAT-PMP protocol. This protocol is similar to non-AirPorts' UPnP protocol.
While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Both wired and wireless clients will be impacted by this until resolved. I again, suggest that you try reconfiguring the AEBSn as a bridge. (ref: AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

Auxiliary filename conflicts with a file used by the target database

Hi,
I am using RMAN backup to duplicate my prod database.
My database is 10g on Linux.
My RMAN script is like this
connect auxiliary /;
connect catalog rman/rman@catalog;
connect target sys/sys@prod;
sql "alter session set optimizer_mode=RULE";
run {
allocate auxiliary channel dup1 type disk;
allocate auxiliary channel dup2 type disk;
allocate auxiliary channel dup3 type disk;
set newname for datafile 1 to '/d05/u08/oracle/qadata/system01.dbf';
set newname for datafile 2 to '/d05/u08/oracle/qadata/system02.dbf';
set newname for datafile 3 to '/d05/u08/oracle/qadata/system03.dbf';
set newname for tempfile 1 to '/d05/u09/oracle/qadata/temp01.dbf';
set newname for tempfile 2 to '/d05/u09/oracle/qadata/temp02.dbf';
set newname for tempfile 3 to '/d05/u09/oracle/qadata/temp03.dbf';
set newname for tempfile 4 to '/d05/u09/oracle/qadata/temp04.dbf';
duplicate target database to qa logfile
group 1 ('/d05/u09/oracle/qadata/log1a.log',
'/d05/u09/oracle/qadata/log1b.log') size 50m,
group 2 ('/d05/u09/oracle/qadata/log2a.log',
'/d05/u09/oracle/qadata/log2b.log') size 50m,
group 3 ('/d05/u09/oracle/qadata/log3a.log',
'/d05/u09/oracle/qadata/log3b.log') size 50m;
I am getting the following error in the middle
Starting Duplicate Db at 18-SEP-10
released channel: dup1
released channel: dup2
released channel: dup3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/18/2010 11:32:07
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename /db01/u08/oracle/proddata/GRCM.dbf conflicts with a file used by the target database
Recovery Manager complete.
Previously the duplicate db was successful, but now it is giving error.
How can I solve this.
Thanks,
Kavitha

5001, 1, "auxiliary file name %s conflicts with a file used by the target database"
// *Cause: RMAN is attempting to use the specified file name as a restore
//         destination in the auxiliary database, but this name is already
//         in use by the target database.
// *Action: Use the CONFIGURE AUXNAME command to specify a name for the data
//          file that does not conflict with a file name in use by the
//          target db.

InitialContextFactoryImpl - does this comes along with the WA Server?

Hi,
Does the class/package com.sap.engine.services.jndi.InitialContextFactoryImpl comes along with the Netweaver 2004s WAS or we need to provide the jar file from other external sources.
If i can find this class, can you give me the name and path of the jar file that contains this class?
Thanks in advance.
-Venkat

It is in the delivery, but it would be completely wrong to call it directly.
Regards,
Benny

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

The name of this class conflicts with the name of another class

Similar Messages

Maybe you are looking for