The network connection was closed by the peer.
hi. I don't understand the words mean
the words is "The network connection was closed by the peer " it is error 66
thanks
Many thanks for your reply . I want to send an emal with an attachment I use the SMTP Email send file.vi . But when I run it ,it always have mistake.I will show you my program and the mistake.The mistake 1 is on the windows 2k . The mistake 2 is on the mistake windows xp
Attachments:
mistake 2.jpg 40 KB
mime.vi 40 KB
mistake1.jpg 292 KB
Similar Messages
-
Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information. -
Hello,
I have a problem with
ExchangeServiceBinding.CreateAttachment(...) method (EWS with Office 365)
When I try to add a small attachment (e.g. 5 MB), then the method works fine.
When I try to add a big attachment (e.g.
12 MB), then the following exception is thrown:
System.Net.WebException
The underlying connection was closed: An unexpected error occurred on a send.
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at C2EWS.Proxy.ExchangeServiceBinding.CreateAttachment(CreateAttachmentType CreateAttachment1) in d:\source\EWSProxyClasses.cs:line 1471
at EWSRequest.Program.UploadAttachment(ExchangeServiceBinding esb, ItemIdType parentItemIdType) in d:\source\EWSRequest\Program.cs:line 90
at EWSRequest.Program.Main(String[] args) in d:\source\EWSRequest\Program.cs:line 59
Inner exception:
System.IO.IOException
Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host.
at System.Net.Sockets.NetworkStream.MultipleWrite(BufferOffsetSize[] buffers)
at System.Net.Security._SslStream.StartWriting(SplitWritesState splitWrite, SplitWriteAsyncProtocolRequest asyncRequest)
at System.Net.Security._SslStream.ProcessWrite(BufferOffsetSize[] buffers, SplitWriteAsyncProtocolRequest asyncRequest)
at System.Net.TlsStream.MultipleWrite(BufferOffsetSize[] buffers)
at System.Net.Connection.Write(ScatterGatherBuffers writeBuffer)
at System.Net.ConnectStream.ResubmitWrite(ConnectStream oldStream, Boolean suppressWrite)
Inner exception:
System.Net.Sockets.SocketException
An existing connection was forcibly closed by the remote host
at System.Net.Sockets.Socket.MultipleSend(BufferOffsetSize[] buffers, SocketFlags socketFlags)
at System.Net.Sockets.NetworkStream.MultipleWrite(BufferOffsetSize[] buffers)
The C# code is the following:
private void UploadAttachment(ExchangeServiceBinding esb, ItemIdType parentItemIdType, string attachmentPath)
// File Attachment
FileAttachmentType fileAttach = new FileAttachmentType();
// Attachment details
byte[] bytes = System.IO.File.ReadAllBytes(attachmentPath);
fileAttach.Content = bytes;
fileAttach.IsInlineSpecified = false;
fileAttach.LastModifiedTimeSpecified = false;
fileAttach.Name = System.IO.Path.GetFileName(attachmentPath);
// Create Attachment
CreateAttachmentType reqCreateAttach = new CreateAttachmentType();
// Add parent Id
reqCreateAttach.ParentItemId = parentItemIdType;
// Add attachment to the query
reqCreateAttach.Attachments = new AttachmentType[1];
reqCreateAttach.Attachments[0] = fileAttach;
// Upload attachment
CreateAttachmentResponseType resp = esb.CreateAttachment(reqCreateAttach);
// Check response errors
CheckErrors(resp);
Could you advise a solution, please?
RobertHello,
The maximum size is rather not the problem in this case. As mentioned in my question above, I have a problem uploading messages with 12MB attachments to Office 365 via EWS. According
to the documentation you provided a link to, the message size limit in all plans of Office 365 is 25MB.
When we try the same request using slow network connection (1Mbit/s) there IS problem - we are NOT able to upload 12 MB attachments.
When we try the same request using faster network connection (10Mbit/s) there is NO problem - we are able to upload 12 MB attachments.
It seems like a kind of timeout - probably from Office365.
Is there a possibility to upload attachment in chunks?
Robert -
The underlying connection was closed: An unexpected error occurred on a receive
Hi,
We have a requirement where we need to create a custom workflow code activity which will download the current uploaded document to a shared network drive. We have created a code activity using client object model to achieve this. But intermittently
below exception is being occured at ctx.ExecuteQuery();
Can anyone help me in resolving the issue?
Exception :
:-The underlying connection was closed: An unexpected error occurred on a receive.The underlying connection was closed: An unexpected error occurred on a receive. at System.Net.HttpWebRequest.GetResponse()
at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
at CustomActivity.CustomCodeActivity.Execute(CodeActivityContext context)
The underlying connection was closed: An unexpected error occurred on a receive.The underlying connection was closed: An unexpected error occurred on a receive. at System.Net.HttpWebRequest.GetResponse()
at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
at Microsoft.SharePoint.Client.ClientContext.GetFormDigestInfoPrivate()
at Microsoft.SharePoint.Client.ClientContext.EnsureFormDigest()
at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
at CustomActivity.CustomCodeActivity.Execute(CodeActivityContext context)
Below is the code written.
using (ClientContext ctx = new ClientContext(strSiteUrl))
// ctx.ExecutingWebRequest += clientContext_ExecutingWebRequest;
LogMessage("In Using");
ctx.FormDigestHandlingEnabled = true;
Web web = ctx.Web;
LogMessage("In Using1");
ctx.Load(web);
LogMessage("In Using2");
ctx.FormDigestHandlingEnabled = true; //Issue occurring while executing below line
ctx.ExecuteQuery();
LogMessage("Exceute Query 1");
//foreach (ListItem item in GetAllListItems(web.Url, strListName,strItemId))
ListItem item = GetAllListItems(web.Url, strListName, strItemId);
LogMessage("in loop1"+item.DisplayName);
foreach (Microsoft.SharePoint.Client.File file in GetListItemAttachments(web.Url, item, strListName))
LogMessage("in loop2");
SaveAttachmentToDisk(file, strFilePath, web.Url);
string fileExt = System.IO.Path.GetExtension(file.Name);
string newName = file.Name.Substring(0, file.Name.IndexOf('.'));
newName = newName + "-" + curDate;Hi,
According to the error message, it usually occurs when server or network device unexpectedly closes an existing Transmission Control Protocol connection.
This problem may occur when time-out value on the server or network is set too low.
To resolve this issue, I suggest you do as the followings:
1. Configure the Web site that hosts the Web services not to use keep-alive connections.
2. Override the HttpWebRequest method in the Reference.cs file that is generated by Microsoft Visual Studio .NET for the Web client proxy.
protected override WebRequest GetWebRequest(Uri uri)
HttpWebRequest webRequest = (HttpWebRequest) base.GetWebRequest(uri);
webRequest.KeepAlive = false;
return webRequest;
More Reference:
http://support.microsoft.com/kb/819450
http://stackoverflow.com/questions/21728773/the-underlying-connection-was-closed-an-unexpected-error-occurred-on-a-receiv
Best regards,
Zhengyu Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support -
The underlying connection was closed. An unexpected error occurred on send
Hi,
I am unable to log into the BPC Admin console. I get this error "The underlying connection was closed. An unexpected error occurred on a send".
I saw a SAP message indicating that turning the Norton firewall off resolves this. I don't have this on my computer. Any ideas on what causes this and how to resolve it?
thanks
AgnesThe problem probably is in the network connection of the machine.
I have seen this problem when I logged in to SAP BPC through a very weak WLAN connection which sometimes lost connection. If the connection was lost during a data send I got this error. So maybe it has something to do with a bad network connection on the machine you are working on.
Side note, I only experienced the problem when I logged on to a Citrix environment throug an internet connection.
When I have a decent connection I don't experience the problem. -
While I have my WSUS integrated with SCCM. I think this error has nothing to do with SCCM, so I put it here in the WSUS forum. On one of my networks, the nightly WSUS sync worked until two weeks ago. I've made no progress in fixing it. Ocassionally it'll
say the sync was successful (about 1 in 15 attempts). I keep getting "WebException: The underlying connection was closed. The connection was closed unexpectedly. at System.WebServices.Protocols.WebClientProtocol.GetWebResponse(WebRequest
request) at System.WebServices.Protocols.GetWebResponse(WebRequest request) at MicroSoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webrequest) at System.Web.Services.Protocols.SoapHttpClientProtocol.(Invoke StringMethodName,Object[]
Parameters) at Microsoft.UpdateServices.ServerSync.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetRevisionIdList(Cookie cookie, ServerSyncFilter filter) at Microsoft.Update.Services.ServerSync.CatalogSyncAgentCore.WebserviceGetRevisionIdList(ServerSyncFilter
filter, Boolean isConfigData), at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesfromUSS() at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)"
Our enterprise has it's own WSUS server we have to sync from. The problem may be at that end, not mine. A sync will start and will fail about 4 minutes later. Our network guy watched the traffic leave our compound but saw only a trickle of traffic coming
back. Any ideas?
Ben JohnsonWYHi,
Please try this fix below first:
FIX: Intermittent "Underlying connection was closed" error message when you call a Web service from ASP.NET
http://support.microsoft.com/kb/819450
I guess you are maintaining a downstream server. If it isn’t a replica server, please try to sync with Microsoft update.
Hope this helps. -
Polycom CX600 The connection was closed before TLS negotiation completed
Hello guys,
I'm trying to login with cx600 at a remote location on a SBA SBA but the log is showing the following message
The connection was closed before TLS negotiation completed .
Did the remote peer accept our certificate ?
scenario :
Offline CA : OfflineIssueCA
Subordinate CA : DomainIssueCA
AD DOMAIN : domain.local
SIP DOMAIN : domainA.com
SIP DOMAIN : domainB.com
Pool: pool01.domain.local
SBA : mysba.domain.local
SBA Certificate :
SN : mysba.domain.local
SAN : sip.domainA.com
SAN : sip.domainB.com
DNS :
sip.domainA.com => ip of mysba.domain.local
_sipinternaltls._tcp.domainA.com => sip.domainA.com
DHCP :
option offer 120 mysba.domain.local
option offer 43 https://pool01.domain.local:443/CertProv/CertProvisioningService.svc
Checking the log LPE I see the following error most often :
ERROR :: :: OUTGOING_TRANSACTION OnRequestConnectionConnectComplete - connection failed error 80ee0065
And the SBA log SIPStack :
The connection was closed before TLS negotiation completed .
Did the remote peer accept our certificate ?
I believe that the phone is not downloading the chain of private certificate :
? = © K € ª Æ DUCD_LOG_INFO : 28/05/2014 | 04:50:30 Aries : 05/28/2014 | 04:50:30.885
C4000A : 5C02336 :: INFO :: CCertInstaller LdapGetValsfromMesg : AddRootCerttoStore ( DER .
) succeeded hr = 0x0
ROMK € Yi DUCD_LOG_ERROR : ? 28/05/2014 | 04:50:30 Aries : 28/05/2014
| 04:50:30.886 C4000A : 5C02336 CLogOnManager :: ERROR :: HandleCertEvent : CertInstaller gave callback with Error
code = 5
Æ D | K € kHžDUCD_LOG_INFO : ? 28/05/2014 | 04:50:30 Aries :
05/28/2014 | 04:50:30.907 C4000A : 5C02336 :: INFO :: CCertInstaller AddSingleCerttoStore : Adding Single Certificate Successful
= © K € OžDUCD_LOG_INFO : 05/28/2014 | 04:50:30 Aries : 05/28/2014 |
04:50:30.908 C4000A : 5C02336 :: INFO :: CCertInstaller LdapGetValsfromMesg : AddRootCerttoStore ( . RSP) succeeded
hr = 0x0
ROMK € mSžDUCD_LOG_ERROR : 05/28/2014 | 04:50:30 Aries :
28/05/2014 | 04:50:30.908 C4000A : 5C02336 CLogOnManager :: ERROR :: HandleCertEvent : CertInstaller gave callback with Error code = 5
: O | K € øËžDUCD_LOG_INFO : 28/05/2014 | 04:50:30 Aries : 28/05/2014
| 04:50:30.928 C4000A : 5C02336 :: INFO :: CCertInstaller AddSingleCerttoStore : Adding Single Certificate Successful
= © K € ¥ ÒžDUCD_LOG_INFO : 28/05/2014 | 04:50:30 Aries : 28/05/2014
| 04:50:30.929 C4000A : 5C02336 :: INFO :: CCertInstaller LdapGetValsfromMesg : AddRootCerttoStore ( . RSP) succeeded
hr = 0x0
ROMK € ñÖžDUCD_LOG_ERROR : 05/28/2014 | 04:50:30 Aries :
05/28/2014 | 04:50:30.930 C4000A : 5C02336 CLogOnManager :: ERROR :: HandleCertEvent : CertInstaller gave callback with Error code = 5
: O | K € OŸDUCD_LOG_INFO : 28/05/2014 | 04:50:30 Aries : 05/28/2014
| 04:50:30.950 C4000A : 5C02336 :: INFO :: CCertInstaller AddSingleCerttoStore : Adding Single Certificate Successful
= © K € UŸDUCD_LOG_INFO : 05/28/2014 | 04:50:30 Aries : 28/05/2014
| 04:50:30.951 C4000A : 5C02336 :: INFO :: CCertInstaller LdapGetValsfromMesg : AddRootCerttoStore ( . RSP) succeeded hr
= 0x0
rom € ¸ ¶ K tŸDUCD_LOG_INFO : 28/05/2014 | 04:50:30
Aries : 28/05/2014 | 04:50:30.956 C4000A : 5520002 :: INFO :: CLogOnManager OnCertStatusEvent : Received notification from CertInstaller with state
= 0x5
G_ck € ™ zŸDUCD_LOG_INFO : 28/05/2014 | 04:50:30
Aries : 05/28/2014 | 04:50:30.957 C4000A : 5520002 :: INFO :: CCertStateImplementor HandleCertEvents : Received Status event from CertInstaller event from
cert installer
4th K € | ŸDUCD_LOG_INFO : 28/05/2014 | 04:50:30 Aries : 05/28/2014
| 04:50:30.957 C4000A : 5520002 :: INFO :: CLogOnScreen OnCertInstallerStateChange : OnCertInstallerStateChange status = 5
Robson Hasselhoff - Follow me @Robk9eLog in below to connect sip.domainA.com:
�é�K€®ËÃ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.693 5510002:5520002 INFO :: SockMgr: Create New Connection:DestName:(sip.domainA.com)DestPort:(5061)Transport:(2)httpTunnel:(0)TLS RemotePrincipalName:(sip.domainA.com)
� (0¯�K€ãÃ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.696 5510002:5520002 INFO :: CSIPCompressor::Initialize - Compression setting 1, threshold 128000, timeout 5000
�)Ì�K€™óÃ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.699 5510002:5520002 INFO :: CSIPAsyncSocket::Connect 00CCD6A0 connecting(async) window 7003B800 socket:00000F8D DestAddr:10.145.53.115:5061
�¬�K€ºaÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.717 5510002:56A000A ERROR :: SECURE_SOCKET: negotiation failed: 80090327, principal name: [sip.domainA.com]
�Ù�K€!fÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.718 5510002:5520002 ERROR :: CSIPTransportLayerSecurity::OnTlsNegotiationComplete (ccd720) failed with 0x80ee0065. Raising OnConnect with the same error
�p.e—�K€¶hÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.718 5510002:5520002 ERROR :: CSIPClientConnection::OnConnect (80ee0065) this: 00CCD540
�0Ï�K€£jÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.719 5510002:5520002 INFO :: SIP_MSG_PROCESSOR::OnRequestConnectionConnectComplete - Enter this: 00CCC1E0, callid=(null), ErrorCode: 0x80ee0065
�i�K€ýkÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.719 5510002:5520002 ERROR :: Releasing connection and notifying transactions
�t t©�K€RmÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.719 5510002:5520002 ERROR :: SIP_MSG_PROCESSOR::NotifyRequestConnectionConnectComplete - Error: 80ee0065
�ca ¹�K€pˆÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.724 5510002:5520002 ERROR :: OUTGOING_TRANSACTION::OnRequestConnectionConnectComplete - connection failed error 80ee0065
�07:~�K€Ö‰Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.724 5510002:5520002 INFO :: REGISTER_CONTEXT:State (4) => (5)
�CC—�K€X‹Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.724 5510002:5520002 INFO :: REGISTER_CONTEXT(ccc1e0) SetAndNotify Recv(6) at State (5)
�c~�K€¿ŽÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.724 5510002:5520002 INFO :: REGISTER_CONTEXT:State (5) => (6)
�nez�K€ Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.725 5510002:5520002 INFO :: SIP_REGISTER:State (1) => (0)
�72–�K€ª”Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.726 5510002:5520002 INFO :: Function: CUccServiceOperationManager::DisableServManager
� Ž�K€º–Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.726 5510002:5520002 INFO :: Function: CUccServerEndpoint::UpdateEndpointState
� 0“�K€ãšÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.726 5510002:5520002 ERROR :: HRESULT API failed: 80ee0061 = hr. DisableServManager
�O«�K€nœÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.727 5510002:5520002 INFO :: CUccDnsResolverManager::Stop MR-INFO - [00CC7C10] DNS resolver manager stopped
�5y�K€µŸÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.728 5510002:5520002 INFO :: ~Out trxn corr-id (00CCD000)
�= hç�K€Ä¥Ä.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.728 5510002:5520002 ERROR :: WriteLogonSessionAssertionTrace: NModel::CEasyUccContext::Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058
�tç�K€˜§Ä.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.729 5510002:5520002 ERROR :: WriteLogonSessionAssertionTrace: NModel::CEasyUccContext::Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058
�5ç�K€T©Ä.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.729 5510002:5520002 ERROR :: WriteLogonSessionAssertionTrace: NModel::CEasyUccContext::Get[133] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058
�Rç�K€«Ä.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.729 5510002:5520002 ERROR :: WriteLogonSessionAssertionTrace: NModel::CEasyUccContext::Get[101] - ASSERTION FAILURE: IUccContext::get_Property() failed!. hr=0x80ee0058
�5¶�K€m¯Ä.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.730 5510002:5520002 ERROR :: NModel::CBaseLogonSession::OnEnable: Logon failed with UCCP status/diag code 0x80ee0065/0
� :K€m·Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.731 5510002:5520002 INFO :: NModel::CManagedCredential::SetResult: Logon success state 0 reported by user id=0 (adjusted=0) on CManagedCredential[SPECIFIC this=00AD1E40, domain=intranet.local,
userName=robson.carvalho]
�et¶�K€ÙºÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.732 5510002:5520002 ERROR :: CServerConfigModel::LoadValue: UCCP object is not received yet. groupIndex=0, hr=80ee0061
�esÈ�K€%½Ä.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.732 5510002:5520002 INFO :: NModel::CLogonServerStatistic::SetResult: CLogonServerStatistic::SetResult sip.domainA.com:5061/3 0x80ee0065
�¼�K€AÀÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.733 5510002:5520002 INFO :: NModel::CLogonServerStatistic::ClearDedicatedServer: CLogonServerStatistic::ClearDedicatedServer
�©�K€ÅÉÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.734 5510002:5520002 INFO :: NModel::CBaseLogonSession::DeactivateRecoveryMode: Recovery mode switched off
�) f|�K€¦ÌÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Uccapi: 05/28/2014|07:28:56.735 5510002:5520002 INFO :: Function: CUccEndpoint::Disable
�©�K€&ÑÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.736 5510002:5520002 INFO :: NModel::CBaseLogonSession::DeactivateRecoveryMode: Recovery mode switched off
�07:ª�K€ËÙÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.737 5510002:5520002 INFO :: CCallManager::OnEvent: CCallManager::OnEvent - Received logon-session event 0.
�=0ñ�K€PÜÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.737 5510002:5520002 INFO :: NModel::CComponentLifecycleManager::NotifyComponentStateChanged: CLM received state change event of component 'LogonSession', reporting state STOPPED
�jecÎ�K€dÞÄ.UCD_LOG_ERROR: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.738 5510002:5520002 ERROR :: NModel::CComponentDetails::SetStatusInfo: Component LogonSession reports error code 0x80ee0065 (no auto-recovery)
�:S2K€æñÄ.UCD_LOG_INFO: 05/28/2014|07:28:56 Aries: 05/28/2014|07:28:56.739 5510002:5520002 INFO :: NModel::CBaseLogonSession::OnEnable:
Received server response:
status/diag code=0x80ee0065/0
clientVersionCheckResult=0
upgradeUrl=
authWebServiceBaseUrl=
currentAuthMode=0
supportedAuthModes=0
isTlsDskSupported=0
Reporting credential success 80ee0065
Reporting server success 80ee0065
updatedServerName=sip.domainA.com:5061
updatedTransportMode=3
isClientVersionCheckError=0
isServerVersionCheckError=0
isConnectionError=1
isRootCertError=0
isAuthError=0
isTlsDskError=0
isKerberosError=1
isUserCredError=0
isProxyCredError=0
isErrorWithCache=0
isNtlmMismatch=0
isServerCertInvalid=1
shouldResetAllowedAuthModes=0
current allowedAuthModes=12
new allowedAuthModes=0
No further alternate server available or SVF/CVF error!
autoRetryByErrorCode=1
withRescheduleHint=0
withAutoRetrials=0
Login failed with permanent error or no auto-retrials
Recovery mode switched off
newState=LOGGED_OUT
Robson Hasselhoff - Follow me @Robk9e -
The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
When trying to log on to the iTunes store I get the message 'We could not complete your iTunes store request. The network connection was reset'. I can access my account on a different PC but not my own. Can you advise me as to what I should do please?
Hello donnafromwakefield,
The article linked below details steps that can help restore your computer's ability to connect to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/en-us/TS1368
Cheers,
Allen -
" +The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message " OR sometimes
"The remote server returned an error: (503) Server Unavailable..Exception.Message"
Getting exception above when performing various operation (site coll creating, group creation, adding users to group) for sharepoint online (Office 365) site using powershell script.
I want to create 3500 site collections using PS script. In-between getting above exception so it will skip one site collection creating and working again. for eg. after creating 11 site coll, script will through above exception and so 12th site coll will
not be create but working fine from 13 and so on...Remote server seems working to me...any additional check?
if problem with remote server then may be loop to create site provisioning should not start again..Right?
any idea? -
OLAP Error:The underlying connection was closed: An unexpected error occure
We have recently installed BPC 51 (SP2). This been working fine for months until yesterday. Now we are getting errors on OLAP Database. Following is the problem description. Any help would be appreciated.
Received error "The underlying connection was closed: An unexpected error occurred on a send." while processing dimension. This message appears during 'Create Dimension' sub step( step 2/5). After this BPC server crashes.
The same error appears while deleting appset during 'Delete OLAP Database' sub step (step 2/4). We are also not able to restore an appset since the process hangs during OLAP Database stage.
Software version: BPC Version 5.0.102 SP2
MS SQL Server 2005
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 6.0.3790.3959
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.2.3790
ThanksYes we did that several time, but did not solve the problem.
Finally, we processed all the dimensions, applications, appsets within SQL server studio and the problem is resolved. I am not sure if this would surface again.
Thanks
Edited by: Sankaranarayanan Janakiraman on Jun 19, 2008 8:34 AM -
Cannot connect to the iTunes store. The network connection was reset.
My iTunes has been messed up since August 17th. I am getting the error message; "Cannot connect to the iTunes Store. The network connection was reset. Make sure your network connection is active and try again." I am having no issues connecting to the internet or even receiving my podcasts. It just won't download my TV shows or let me shop. I have contacted Hewlett Pack. about this and iTunes/apple. No one seems to have an answer for me. I have disabled my firewalls, norton, done msconfig, allowed iTunes, everything. I am very frustrated and so are others that seem to be having this same problem. We need a genius!! Please help!
I suspect a location-driven problem here. I live in SHanghai, China - as does the poster above! I have this problem on three different computers using three different ISPs.
Anybody got a suggestion? Tried firewalls, turning off virus production, reinstalling iTunes, putting phobos.apple.com and such in the permitted list, all sorts of stuff, to no avail. And Apple help support just bounces me around - I've interacted via email with three people, finally graduated to a real person, and they sent me back to email when the usual "reboot your machine and reinstall iTunes, then turn off virus protection" didn't work.
Bill Parr
[email protected] -
ITunes store will not update my apps: "The network connection was reset."
Why can't I update my apps as usual? I suddenly keep getting the message "There was a problem downloading [name of application]. The network connection was reset."
De nada amigo.
Thank You for extending the courtesy of awarding points to comments that are helpful or provide answers in the Apple Support Communities, as this is not mandatory, but it is much appreciated! -
My itunes says " We could not complete your itunes store request. The network connection was reset." what do i do?
All you can do is wait. Apple should have spent the money they allocated toward making iOS all white on network infrastructure to handle the traffic flow during the upgrade rollout.
-
"We could not complete your iTunes Store request. The network connection was lost." ***???
Thanks for such a great update!!!
I used to have activation problems. now I am getting same error
"We could not complete your iTunes Store request. The network connection was lost." "
Maybe you are looking for
-
Hi, I want to post assets write up with $ 5000 and want this to affect the NBV. What is happening is that some of the amount get caught into ordinary depreciation so ultimate impact is just $ 4000.00. This way my depreciation for the year is increase
-
but now all my music and apps are not showing on the newly installed iTunes or on my iPhone. How can I get all my content that is on original iTunes to show on the newly installed iTunes and iPhone? Can anyone please help me?
-
Ipod touch time of day restrictions
I have a 4th gen ipod touch and I want to set up time of day restrictions, such that the device cannot be used during the restricted hours. I've looked quite a bit on the web and it appears that this functionality does not natively exist as I've desc
-
Cropping tool cc 2014 how to select the ppi
In Ps cc i could specify The ppi of my crop, in Ps 2014 i can't.
-
LaCie Rugged Hard Disk stopped backing up
I have been backing up my Mac on a LaCie Rugged for a couple of years. I got so used to it working that I stopped checking to make sure it was backing up, and today I found out that my Mac has not been backed up for 105 days. When I opened Time Mac