WSUS sync fails with "Webexception the underlying connection was closed. The connection was closed unexpectedly"

While I have my WSUS integrated with SCCM. I think this error has nothing to do with SCCM, so I put it here in the WSUS forum. On one of my networks, the nightly WSUS sync worked until two weeks ago. I've made no progress in fixing it. Ocassionally it'll
say the sync was successful (about 1 in 15 attempts). I keep getting "WebException: The underlying connection was closed. The connection was closed unexpectedly. at System.WebServices.Protocols.WebClientProtocol.GetWebResponse(WebRequest
request) at System.WebServices.Protocols.GetWebResponse(WebRequest request) at MicroSoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webrequest) at System.Web.Services.Protocols.SoapHttpClientProtocol.(Invoke StringMethodName,Object[]
Parameters) at Microsoft.UpdateServices.ServerSync.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetRevisionIdList(Cookie cookie, ServerSyncFilter filter) at Microsoft.Update.Services.ServerSync.CatalogSyncAgentCore.WebserviceGetRevisionIdList(ServerSyncFilter
filter, Boolean isConfigData), at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesfromUSS() at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)"
Our enterprise has it's own WSUS server we have to sync from. The problem may be at that end, not mine. A sync will start and will fail about 4 minutes later. Our network guy watched the traffic leave our compound but saw only a trickle of traffic coming
back. Any ideas?
Ben JohnsonWY

Hi,
Please try this fix below first:
FIX: Intermittent "Underlying connection was closed" error message when you call a Web service from ASP.NET
http://support.microsoft.com/kb/819450
I guess you are maintaining a downstream server. If it isn’t a replica server, please try to sync with Microsoft update.
Hope this helps.

Similar Messages

Wsus Sync Failed. WebException: The underlying connection was closed: An unexpected error occurred on a send. --- System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream.

Hi I have installed wsus 3 sp2 on a win 2008 R2 Sp1
before the installation , I have updated the windows
I can open easily browse internet , but when I try to configure synchronization .but it fails.
No firewall , no proxy ............. I am behind a nat.
Wsus version is 3.2.7600.256.
I have searched and searched .....
Can any body help me
WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Received an unexpected EOF or 0 bytes from the transport stream.
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webRequest)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
   at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
   at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
   at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
   at Microsoft.UpdateServices.Serve

Hi
yes . it is alloweded.
Nat rule permits any ip traffic . No problem with https...
also my windows is fully updated.
here is my netstat -an , maybe usefull.
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING
TCP    0.0.0.0:8530           0.0.0.0:0              LISTENING
TCP    0.0.0.0:8531           0.0.0.0:0              LISTENING
TCP    0.0.0.0:47001          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49155          0.0.0.0:0              LISTENING
TCP    0.0.0.0:49156          0.0.0.0:0              LISTENING
TCP    --------------------:139       0.0.0.0:0              LISTENING
TCP    --------------------:8530      172.16.2.201:53317     ESTABLISHED
TCP    --------------------:49362     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49363     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49367     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49377     23.65.244.185:443      ESTABLISHED
TCP    --------------------:49414     131.253.34.141:443     ESTABLISHED
TCP    --------------------:49416     216.239.32.20:80       ESTABLISHED
TCP    --------------------:49417     216.239.32.20:80       ESTABLISHED
TCP    --------------------:49418     173.194.70.113:80      ESTABLISHED
TCP    --------------------:49419     173.194.70.113:80      ESTABLISHED
TCP    --------------------:49420     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49421     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49424     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49425     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49426     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49427     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49428     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49429     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49430     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49431     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49432     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49433     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49434     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49435     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49436     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49437     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49438     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49439     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49440     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49441     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49442     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49443     88.221.93.54:80        ESTABLISHED
TCP    --------------------:49444     88.221.93.54:80        ESTABLISHED
TCP    --------------------:49445     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49446     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49447     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49448     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49449     88.221.93.63:80        ESTABLISHED
TCP    --------------------:49450     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49451     88.221.93.31:80        ESTABLISHED
TCP    --------------------:49453     88.221.93.30:80        ESTABLISHED
TCP    --------------------:49456     65.55.58.184:80        ESTABLISHED
TCP    --------------------:49457     65.55.58.184:80        ESTABLISHED
TCP    --------------------:49460     131.253.34.142:80      ESTABLISHED
TCP    --------------------:49461     131.253.34.142:80      ESTABLISHED
TCP    --------------------:49462     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49463     65.52.103.78:80        ESTABLISHED
TCP    --------------------:49464     63.251.85.33:80        ESTABLISHED
TCP    --------------------:49466     131.253.40.50:80       ESTABLISHED
TCP    --------------------:49467     131.253.40.50:80       ESTABLISHED

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

PC Sync fails with USB2/BT2 dongle connection to N...

I have a problem with syncing my N2760 phone.
Its BT connection works fine with the headset but PC Sync, after working sporadically on the first day (it took 6 tries to load my 530 Outlook contacts on to the phone) no longer works at all.
I have 2 BT enabled computers, a Vista Home Premium Sony Laptop using a Bluesoleil USB2/BT2 dongle and an XP Pro workstation using a Broadcom USB2/BT2 dongle with Widcomm software. In both cases the BT stacks are listed as being supported by PC Suite.
On both machines PC Sync runs for a little while then the sync fails with a message suggesting I check the connection. The phone also partially locks up and the screen just displays the battery and BT symbols, the rest is blank. It won't come out of this condition even if I remove the battery and/or simm card. After 15 minutes or so it recovers by itself.
The PC Suite version is 6.85.14.1

I think the information I'm looking for is whether anyone has been able to get reliable performance from PC Sync using a BT dongle. AFAICT there are 3 supported BT stack families, Widcomm, Bluesoleil amd Microsoft. The one I haven't tried is MS - would it be worth my while looking for a dongle that's supported by MS?

Sync failed with the exception "We have encountered an issue in syncing your data."

Getting this rather useless sync error. Can you help identify our problem please.
Sync failed with the exception "We have encountered an issue in syncing your data." For more information, provide tracing ID ‘56e1113f-93db-4cee-9088-81d29ee39687’ to customer support.
Thanks
Nicholas
CTO of Hard Medium Soft Ltd. and Independent Developer

Hello,
Sorry to hear you met this issue.
Please post your subscription ID and Sync Group ID.The Microsoft support engineer will help to sovle the problem from backend.Sometime delay might be expected. Your patience is greatly appreciated. Thank you for your understanding and support.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem.

When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem?

I have similar problems trying to synchronize my calendar, also after update on 7.1.1. on my Iphone 5.
It doesn;t replace the outlook entries on Iphone 5.
I didn,t try to synchronize the contacts, because it may fail.
Has any one an idea what could be the reasson for thid synchronize problems.

Need the the underlying table names which the Material Plan Detail Search p

Our supply planning users would like to obtain the demand and supply plan for a bunch of given parts by running a query against some tables. The data they need via a PS Query output in Excel format is the same data that is provided by the Material Plan Detail page in PeopleSoft Supply Planning (Menu Path: Supply Planning >>>Solve Plan>>>> Material >>>>>>Material Plan Detail). The main underlying table behind this page is PS_PL_MRP_DTL.
The problem is that this table contains data for only one Part Number (INV_ITEM_ID). The data is populated when Item ID is selected on the Material Plan Detail Search page.
What are the underlying table names which the Material Plan Detail Search page brings together to present the information for the selected part number on the target page (The Material Plan Detail page)?
If you could tell us the underlying table names (which the Material Plan Detail Search page brings together) we can write a query to present the data to the users for multiple part numbers at a time and not just one part number at a time.
Any help would be greatly appreciated.
We are on FSCM 8.9 Bundle 13
Thanks in advance.

The ERD's for FSCM 8.9 are available from following link
PeopleSoft Enterprise Financial Management 8.9 Entity Relationship Diagrams [ID 979359.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=979359.1
Hope it contains the info you are looking for.
Hakan

BACKUP LOG suddenly failed with Msg 35250, Level 16, State 11 The connection to the primary replica is not active. The command cannot be processed.

I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node. It is set up to prefer secondary,
with the highest priority given to AC node.
I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule. His scripts already consider AlwaysOn, and although the job is set-up on all
3 nodes, only ever runs on AC node.
The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
Date and time: 2014-06-08 09:36:11
Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
Msg 35250, Level 16, State 11, Server AC, Line 1
The connection to the primary replica is not active. The command cannot be processed.
Msg 3013, Level 16, State 1, Server AC, Line 1
BACKUP LOG is terminating abnormally.
Outcome: Failed
Duration: 00:01:00
The other 12 databases continued to backup successfully.
Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
However, monitoring software (Idera SQLdm) showed blocked sessions on P node. When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
Since both processes were background processes, I was unable to kill either process. I temporarily disabled the transaction log backup job, but the blocked process was still active.
I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors. However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back. This also had the effect of releasing
the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
I tried to restart SQL Server Agent on AC node, which did not immediately seem to work. However, after a few minutes, I noticed that the block had disappeared. I re-enabled the transaction log backup job on AC and it started working normally
again. The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
Any help would be greatly appreciated.
Diane

And here is part 2 of the stored procedure:
--// Execute backup commands //--
WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
BEGIN
SELECT TOP 1 @CurrentDBID = ID,
@CurrentDatabaseName = DatabaseName,
@CurrentDatabaseNameFS = DatabaseNameFS,
@CurrentDatabaseType = DatabaseType
FROM @tmpDatabases
WHERE Selected = 1
AND Completed = 0
ORDER BY ID ASC
SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
BEGIN
SET @CurrentIsDatabaseAccessible = 1
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
FROM sys.master_files
WHERE database_id = @CurrentDatabaseID
AND [type] = 0
AND [file_id] = 1
-- Workaround for a bug in SQL Server 2005
IF @Version >= 9 AND @Version < 10
AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
BEGIN
SET @CurrentDifferentialBaseLSN = NULL
END
SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
FROM msdb.dbo.backupset
WHERE database_name = @CurrentDatabaseName
AND [type] = 'D'
AND checkpoint_lsn = @CurrentDifferentialBaseLSN
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
SELECT @CurrentLogLSN = last_log_backup_lsn
FROM sys.database_recovery_status
WHERE database_id = @CurrentDatabaseID
END
SET @CurrentBackupType = @BackupType
IF @ChangeBackupType = 'Y'
BEGIN
IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'DIFF'
END
IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'FULL'
END
END
IF @CurrentBackupType = 'LOG'
BEGIN
SELECT @CurrentLatestBackup = MAX(backup_finish_date)
FROM msdb.dbo.backupset
WHERE [type] IN('D','I')
AND is_damaged = 0
AND database_name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL
BEGIN
SELECT @CurrentAvailabilityGroup = availability_groups.name,
@CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
FROM sys.databases databases
INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
WHERE databases.name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
BEGIN
SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
END
SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
FROM sys.database_mirroring
WHERE database_id = @CurrentDatabaseID
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'PRIMARY'
END
ELSE
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'SECONDARY'
END
-- Set database message
SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
BEGIN
-- Set variables
SET @CurrentDate = GETDATE()
IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
BEGIN
SET @CurrentCleanupDate = NULL
END
ELSE
IF @CurrentBackupType = 'LOG'
BEGIN
SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
END
ELSE
BEGIN
SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
END
SELECT @CurrentFileExtension = CASE
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
END
INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
FROM @Directories
ORDER BY ID ASC
SET @CurrentFileNumber = 0
SET @CurrentMirrorFilePath = NULL
WHILE @CurrentFileNumber < @NumberOfFiles
BEGIN
SET @CurrentFileNumber = @CurrentFileNumber + 1
SELECT @CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
END
INSERT INTO @CurrentFiles (CurrentFilePath)
SELECT @CurrentFilePath
SET @CurrentDirectoryPath = NULL
SET @CurrentFilePath = NULL
END
-- Create directory
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CreateCompleted = 0
ORDER BY ID ASC
SET @CurrentCommandType01 = 'xp_create_subdir'
SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
UPDATE @CurrentDirectories
SET CreateCompleted = 1,
CreateOutput = @CurrentCommandOutput01
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand01 = NULL
SET @CurrentCommandOutput01 = NULL
SET @CurrentCommandType01 = NULL
END
-- Perform a backup
IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
END
SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
SET @CurrentCommand02 = @CurrentCommand02 + ''''
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
WHEN @EncryptionType = 'RC2-40' THEN '0'
WHEN @EncryptionType = 'RC2-56' THEN '1'
WHEN @EncryptionType = 'RC2-112' THEN '2'
WHEN @EncryptionType = 'RC2-128' THEN '3'
WHEN @EncryptionType = '3DES-168' THEN '4'
WHEN @EncryptionType = 'RC4-128' THEN '5'
WHEN @EncryptionType = 'AES-128' THEN '6'
WHEN @EncryptionType = 'AES-192' THEN '7'
WHEN @EncryptionType = 'AES-256' THEN '8'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType02 = 'sqlbackup'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
WHEN @EncryptionType = 'AES-128' THEN '128'
WHEN @EncryptionType = 'AES-256' THEN '256'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType02 = 'BACKUP_DATABASE'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType02 = 'xp_ss_backup'
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
WHEN @EncryptionType = 'AES-128' THEN 'AES128'
WHEN @EncryptionType = 'AES-256' THEN 'AES256'
END + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
END
-- Verify the backup
IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType03 = 'xp_restore_verifyonly'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
SET @CurrentCommand03 = @CurrentCommand03 + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType03 = 'sqlbackup'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType03 = 'xp_ss_verify'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
END
-- Delete old backup files
IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
BEGIN
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CleanupCompleted = 0
ORDER BY ID ASC
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType04 = 'xp_slssqlmaint'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType04 = 'sqbutility'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType04 = 'xp_ss_delete'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
UPDATE @CurrentDirectories
SET CleanupCompleted = 1,
CleanupOutput = @CurrentCommandOutput04
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand04 = NULL
SET @CurrentCommandOutput04 = NULL
SET @CurrentCommandType04 = NULL
END
END
END
-- Update that the database is completed
UPDATE @tmpDatabases
SET Completed = 1
WHERE Selected = 1
AND Completed = 0
AND ID = @CurrentDBID
-- Clear variables
SET @CurrentDBID = NULL
SET @CurrentDatabaseID = NULL
SET @CurrentDatabaseName = NULL
SET @CurrentBackupType = NULL
SET @CurrentFileExtension = NULL
SET @CurrentFileNumber = NULL
SET @CurrentDifferentialBaseLSN = NULL
SET @CurrentDifferentialBaseIsSnapshot = NULL
SET @CurrentLogLSN = NULL
SET @CurrentLatestBackup = NULL
SET @CurrentDatabaseNameFS = NULL
SET @CurrentDatabaseType = NULL
SET @CurrentDate = NULL
SET @CurrentCleanupDate = NULL
SET @CurrentIsDatabaseAccessible = NULL
SET @CurrentAvailabilityGroup = NULL
SET @CurrentAvailabilityGroupRole = NULL
SET @CurrentIsPreferredBackupReplica = NULL
SET @CurrentDatabaseMirroringRole = NULL
SET @CurrentLogShippingRole = NULL
SET @CurrentCommand02 = NULL
SET @CurrentCommand03 = NULL
SET @CurrentCommandOutput02 = NULL
SET @CurrentCommandOutput03 = NULL
SET @CurrentCommandType02 = NULL
SET @CurrentCommandType03 = NULL
DELETE FROM @CurrentDirectories
DELETE FROM @CurrentFiles
END
--// Log completing information //--
Logging:
SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
SET @EndMessage = REPLACE(@EndMessage,'%','%%')
RAISERROR(@EndMessage,10,1) WITH NOWAIT
IF @ReturnCode <> 0
BEGIN
RETURN @ReturnCode
END
END
GO
ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
GO
Diane

Update Sync Fails with 0x80131500

Hello,
I've looked through the forum for an answer to this recent problem. I went to sync updates for the new out-of-band IE patch and discovered the last time my catalog updated successfully was 4/26. We did have patches install on production servers the next
day including a service pack for SQL server 2012.
This software update point has worked for months, has no proxy, no change of the WSUS location, nor did adding credentials to connect to WSUS (on the same server) help any. I also looked on both the SQL server and the SCCM server for update
KB2840628 which had been mentioned in some posts.
Due to the proximity of the breakage to the updates I would assume either an update or the reboot of the servers caused the issue. We've rebooted both SQL and SCCM since to no avail.
WSUS on the same server shows synchronizations as "success" so the underlying structure seems to be working fine.
I have not deleted the Software Update Point and re-added since I wasn't certain exactly what that does.
The logs show the following errors. I've looked for answers based on these but haven't found anythign that works or fits my situation (WSUS hasn't moved, etc):
Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted.
Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates $$<SMS_WSUS_SYNC_MANAGER>
Too many consecutive failures. Aborting sync. $$<SMS_WSUS_SYNC_MANAGER>
Any suggestions would be appreciated.

Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted.
Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates $$<SMS_WSUS_SYNC_MANAGER>
Too many consecutive failures. Aborting sync. $$<SMS_WSUS_SYNC_MANAGER>
Any suggestions would be appreciated.
Even I had similar issue however it got resolved by itself, so it could be something to do with external to CM12 as Umair mentioned. Also some more details troubleshooting and solution available in the following thread http://social.technet.microsoft.com/Forums/en-US/09ed08ef-876e-493d-b139-6fc3d9500447/sccm-software-update-errorlicense-terms-could-not-be-downloaded?forum=configmanagerdeployment
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

SCCM WSUS Synchronization fails with error 0x80131904

With no reason the software update point in SCCM 2012 CU3 fails to synchronize update from the local installed WSUS service. I have checked the WSUS Sync manager log and what I have got is in the image below. I have tried to uninstall and the WSUS service
and reinstalled it but no success. I have also used the clean up option from the WSUS console and no success yet.
From the log below I am quite sure that if I can force the removal or clean up those updates that are failing to get saved the SCCM Update point synchronization might be able to fully synchronize. I hope someone can help me out. Thanks in advance.
Event view error - 2148734208
Wsyncmgr.log

I need WCM.log for investigation. Please upload this file to Skydrive and post the link here.
Juke Chou
TechNet Community Support

PSE7 Backup/Sync fails with existing album

My PSE7 install is an upgrade from PSE6, so obviously I have a large numnber of albums defined already from what PSE7 considers to be the "first run" of the organizaer.
I've been down this road of trying to sync my content up to PS.COM once before - and it was a disaster. Had issues on both ends of the deal, so I went back to PSE6 while working with the PS.COM guys (who turned out to be great!) to get the issues with the site straightened out. I think we're there on the web side, so I'm starting over. I wiped out everything on the PS.COM side - had a blank account with 40G of space available.
I upgraded (again) to PSE7. Once 7 was running I created a new album (called Test PScom), enabled backup/sync and put three photos in it. This all worked fine, and my three photos are now up on the PS.COM site.
However, test two crapped out. I took an existing album (with about 15 photos in it) and enabled backup/sync for it. What happend is that the sync agent created the album on the PS.COM site, but none of the photos ever get uploaded. If I choose the "photos pending sync" view in PSE7, I see all 15 of the items that belong in this album. They're marked as needing to be sync'd. However, they never actually get transfered.
Things I'm pretty sure of:
It's not a permissions / firewall / connectivity problem. Anything I create that's brand new syncs just fine.
It's not the content of this album. All 15 photos are JPGs ~1M each
I'm not out of space on the site, and my PS.COM account is (now) in good working order
The sync engine itself hasn't died
I've seen all the suggestions (made some of them myself) about how to "trick" the engine into working. I'll do it if I have to, but I'm much more interested in getting some onput from Adobe as to what the real problem is here.
Also curious if I'm the only one left with this issue, or if there are others?

Hi,
Sign out of your account. Stop sync and follow the steps mentioned at the following tech note http://kb2.adobe.com/cps/408/kb408660.html . Sign in and start sync again. See if it helps .
Also send us your Sync db : Navigate to your catalog location (catalog location can be viewed under Help>System Info)Zip the syncdb folder there and send to [email protected]
Thanks

If I sync apps with migration assistant, will it over-write the newer iLife apps on my new MacBook Pro?

I purchased a new MacBook Pro (Mountain Lion) and connected it to my existing iMac (Lion) to transfer over my user account, music and applications. It did not occur to me that the process might over-write the iLife apps already factory installed on the MBP. I am having trouble checking if that happened, but getting info on both iPhoto and iMovie shows that they are 32-bit applications (Calendar, Contacts and iMessage just show as "applications" without saying if they are 32- or 64-bit).
What version numbers should all those iLife apps be? If I have over-written them, what would I have to do to restore the factory installed versions at this point since the MBP does not come with install disks anymore?

MacJack: I did the migration when started up the computer for the first time.
As for suggestion from Mende1, it sounds like a great idea, but if I did over-write what was already there, will the App Store charge me for the apps if I did not buy them through the App Store (since they came pre-installed on the MBP)? If so, I would prefer to take the MBP to an Apple store with the receipt and offer an explanation.
Would knowing the version numbers of the software I now have installed be enough information to know if they were the versions that came pre-installed on the MBP under Mountain Lion?

APEX fails with Java stored procedure that creates a JDBC connection

Hello!
We are facing a strange problem since we have upgraded from Oracle 10g and Apache to Oracle 11g with Embedded Gateway.
Here is what we do:
** APEXX calls a PL/SQL package function "OPEN_CONNECTION" that wraps a Java stored procedure called "openConnection".*
FILE_READER_REMOTE_API.openConnection(user, password, host, port, service);
** The Java stored procedures "openConnection" opens a JDBC connection to an other database:*
public class FileReaderRemote {
private static Connection conn = null;
private static DefaultContext remoteContext = null;
public static void openConnection(String user, String password, String host, String port, String service) throws SQLException {
// Load the Oracle JDBC driver
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
java.util.Properties props = new java.util.Properties();
props.put ("user", user);
props.put ("password", password);
//props.put ("database", "//" + host + ":" + port + "/" + service);
props.put ("database", host + ":" + port + ":" + service);
props.put("v$session.program", "FileReaderRemote2");
// Connect to the database
remoteContext = Oracle.getConnection("jdbc:oracle:thin:", props);
This procedure used to work fine before the upgrade, but now we see the following:
* It still works when called directly from TOAD or SQL*Plus, even under the user ANONYMOUS.
* When called from APEX and the target database is Oracle 11g, it still works.
* When called from APEX and the target database is Oracle 10g, it takes several minutes and we receive this error:
*"Socket read timed out"*
We have tested the following workaround:
We have created a database link to our own database and called the stored procedure through that database link.
FILE_READER_REMOTE_API.openConnection*@loopback*(user, password, host, port, service);
This works, but is not really an option.
I hope some one of you can explain this strange behaviour to me.
Best regards,
Matthias

You wrote
"Java stored procedures -- by definition - are stored in the 8i rdbms. !!"
From the Oracle8i Java Stored Procedures Developer's Guide
Release 8.1.5
A64686-01
"If you create Java class files on the client side, you can use loadjava to upload them into the RDBMS. Alternatively, you can upload Java source files and let the Aurora JVM compile them. In most cases, it is best to compile and debug programs on the client side, then upload the class files for final testing within the RDBMS"
This means that you can create shared classes that are used on both the client and server side. The source does not need to reside within the server (according to their documentation). Please also note the following from the Oracle8i JDBC Developer's Guide and Reference Release 8.1.5 A64685-01 for using the getConnection() method on the server:
"If you connect to the database with the DriverManager.getConnection() method, then use the connect string jdbc:oracle:kprb:. For example:
DriverManager.getConnection("jdbc:oracle:kprb:");
Note that you could include a user name and password in the string, but because you are connecting from the server, they would be ignored."
So if you're coding a shared class that is to run on both the client and server side, you might do something like this:
Connection conn =
DriverManager.getConnection(
System.getProperty("oracle.server.version") == null
? "jdbc:oracle:thin:@hostname:1521:ORCL"
: "jdbc:oracle:kprb:"),
"youruserid","yourpassword");
As stated earlier, the userid and password are supposedly ignored for server connections retrieved in this manner. I haven't tried this yet, but it is documented by Oracle.
Regards,
Steve
null

Sync failing with unknown error - previously worked

Over the past month, my desktop Firefox has started displaying the dreaded “Sync encountered an error while syncing: Unknown error.” message. I've tried disconnecting and reconnecting the browser, but it still does it.
Unlike other reporters, I'm not seeing any obvious issues that might pertain to my profile (e.g., corrupted places.sqlite). All seems innocuous until it ends with things along the lines of:
<some seemingly OK stuff snipped>
1406223828207 Sync.Service DEBUG Weave Version: 1.33.0 Local Storage: 5 Remote Storage: 5
1406223828207 Sync.Service INFO Sync key is up-to-date: no need to upgrade.
1406223828207 Sync.Service DEBUG Fetching and verifying -- or generating -- symmetric keys.
1406223828207 Sync.BrowserIDManager DEBUG _ensureValidToken already has one
1406223828410 Sync.Resource DEBUG mesg: GET success 200 https://sync-27-us-west-2.sync.services.mozilla.com/1.5/1006668/info/collections
1406223828410 Sync.Resource DEBUG GET success 200 https://sync-27-us-west-2.sync.services.mozilla.com/1.5/1006668/info/collections
1406223828411 Sync.Service INFO Testing info/collections: {"bookmarks":1406143818.46,"meta":1405163266.19,"clients":1406138521.09,"crypto":1399970739.18,"greasemonkey":1405163174.88}
1406223828412 Sync.CollectionKeyManager INFO Testing for updateNeeded. Last modified: 0
1406223828412 Sync.Service INFO collection keys reports that a key update is needed.
1406223828413 Sync.BrowserIDManager DEBUG _ensureValidToken already has one
1406223858621 Sync.Resource DEBUG mesg: GET fail 503 https://sync-27-us-west-2.sync.services.mozilla.com/1.5/1006668/storage/crypto/keys
1406223858621 Sync.Resource DEBUG GET fail 503 https://sync-27-us-west-2.sync.services.mozilla.com/1.5/1006668/storage/crypto/keys
1406223858622 Sync.Status DEBUG Status.login: error.login.failed => error.login.reason.server
1406223858622 Sync.Status DEBUG Status.service: success.status_ok => error.login.failed
1406223858622 Sync.ErrorHandler DEBUG Got Retry-After: 1884
1406223858622 Sync.Status DEBUG Status.login: error.login.reason.server => error.sync.reason.serverMaintenance
1406223858622 Sync.Status DEBUG Status.service: error.login.failed => error.login.failed
1406223858623 Sync.SyncScheduler DEBUG Got backoff notification: 1884000ms
1406223858623 Sync.SyncScheduler DEBUG Fuzzed minimum next sync: 1406225742623
1406223858623 Sync.Service WARN Got status 503 fetching crypto keys.
1406223858624 Sync.Service WARN Failed to fetch symmetric keys. Failing remote setup.
1406223858624 Sync.Service WARN Remote setup failed.
1406223858626 Sync.SyncScheduler DEBUG Clearing sync triggers and the global score.
1406223858627 Sync.SyncScheduler DEBUG Next sync in 2214594.8767703027 ms.
That 503 error is very common. Whilst fiddling, I think I saw a 502, but wouldn't swear to it.
With the logOnSuccess option enabled, I get something which, helpfully, appears to be completely different!
1406224011465 Sync.Service DEBUG Weave Version: 1.33.0 Local Storage: 5 Remote Storage: 5
1406224011465 Sync.Service INFO Sync key is up-to-date: no need to upgrade.
1406224011465 Sync.Service DEBUG Fetching and verifying -- or generating -- symmetric keys.
1406224011466 Sync.BrowserIDManager DEBUG _ensureValidToken already has one
1406224011678 Sync.Resource DEBUG mesg: GET success 200 https://sync-27-us-west-2.sync.services.mozilla.com/1.5/1006668/info/collections
1406224011678 Sync.Resource DEBUG GET success 200 https://sync-27-us-west-2.sync.services.mozilla.com/1.5/1006668/info/collections
1406224011679 Sync.Service INFO Testing info/collections: {"bookmarks":1406143818.46,"meta":1405163266.19,"clients":1406138521.09,"crypto":1399970739.18,"greasemonkey":1405163174.88}
1406224011679 Sync.CollectionKeyManager INFO Testing for updateNeeded. Last modified: 0
1406224011680 Sync.Service INFO collection keys reports that a key update is needed.
1406224011681 Sync.BrowserIDManager DEBUG _ensureValidToken already has one
1406224130781 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224130781 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224133509 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224133509 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224135853 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224135853 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224136820 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224136820 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224189681 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224189682 Sync.Status DEBUG Status.service: success.status_ok => success.status_ok
1406224311683 Sync.Service WARN Got exception "Error: Aborting due to channel inactivity." fetching cryptoKeys.
1406224311683 Sync.Status DEBUG Status.login: error.sync.reason.serverMaintenance => error.login.failed
1406224311683 Sync.Status DEBUG Status.service: success.status_ok => error.login.failed
1406224311684 Sync.Service WARN Failed to fetch symmetric keys. Failing remote setup.
1406224311684 Sync.Service WARN Remote setup failed.
1406224311686 Sync.SyncScheduler DEBUG Clearing sync triggers and the global score.
1406224311687 Sync.SyncScheduler DEBUG Next sync in 2214594.8767703027 ms.
It all looks comms related to me, but my broadband isn't playing up.

Hello,
Thanks for letting us know about your problem. It seems that there is some problem in your profile. Creating a new profile may fix your problem. Create a new profile and sync with your Firefox Account.
For Creating a profile, Please do following:
If Firefox is already included in your Linux distribution or if you have installed Firefox with the package manager of your Linux distribution:
# Close your Firefox.
# In '''Terminal''' run: <br/> <code>firefox -P</code>
# To start the Create Profile Wizard, click '''Create Profile...''' Button in the Profile Manager.
# Click {button Next} and enter the name of the profile. Use a profile name that is descriptive, such as your personal name. This name is not exposed on the Internet.
# To create the new profile, click '''Finish'''
For more instruction regarding creating a new profile, please see this article. [[Use the Profile Manager to create and remove Firefox profiles]]

Solution Manager Quality Assurance Sync Fails with Deadlock

Transaction --> SOLAR02 --> Configuration --> Send Data to Qulaity Center
We are trying to sync the Requirement from Solution Manager 7.0 EHP1 to Qulaity Center 10.
It was working fine till we added more requirements in Solution Manager.
I know DEADLOCKs are Application Design issues and Vendor has to help.We are working with SAP for the last 2 weeks and no help from them.
Following is the error message I get from Quality Center Log.
Failed to create REAL alerts from pending alert #449072; Failed to determine users and entities to add alerts to; Unexpected failure in getValuePostProcess; Failed to get alert values; Failed SQL: /* ~~QC */ SELECT * FROM ALERT WHERE (AT_KEY1 IN (1188,1192,1195,1198,1205,1208,1217,1220,1223,1227,1235)) AND AT_ENTITY_TYPE = 'REQ' AND ( AT_ALERT_TYPE = 2 OR AT_ALERT_TYPE <> 2 AND AT_USER = /P/'qctransfer') ORDER BY AT_DATE DESC [Mercury][SQLServer JDBC Driver][SQLServer]Transaction (Process ID 409) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction.;
Following is in the JBOSS Log
Caused by: java.sql.SQLException: Failed SQL: /* ~~QC */ SELECT * FROM ALERT WHERE (AT_KEY1 IN (839)) AND AT_ENTITY_TYPE = 'REQ' AND ( AT_ALERT_TYPE = 2 OR AT_ALERT_TYPE <> 2 AND AT_USER = /P/'qctransfer') ORDER BY AT_DATE DESC
[Mercury][SQLServer JDBC Driver][SQLServer]Transaction (Process ID 327) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Did any one face this issue?

This is for anyone who has ever had a problem like this between his/her local and network accounts. Apparently, when Mac OS X SL Server creates the network account, it tries to duplicate the basic file structures one would find in an independent (i.e. non-networked) machine. My goal was to be able to use my network account, at home, as my standard so that I would be able to take advantage of the networked file services. I succeeded in this and was able to transfer successfully my iTunes library as well. However, the iSync Manager did not duplicate in the new Open Directory account. Upon reading past posts to Apple Discussion groups I determined that there are two files that the iSync Manager uses in order to function. They are as follows:
~/Library/Application Support/SyncServices/Local/
and
~/Library/Application Support/iSync/
Copy these two files from your local account to the Open Directory account in their same relative places in the file structure and your iSync Manager will start and you will be able to sync your iPhone calendars and contacts with iTunes.

WSUS sync fails with "Webexception the underlying connection was closed. The connection was closed unexpectedly"

Similar Messages

Maybe you are looking for