The number of POV to be set exceeds grid POV

Hi All,
In smart view i am getting the below error.
The number of POV to be set exceeds grid POV.
Can you please let me know where i have change the number of POV value?
Thanks,
Prathap

Hi Prathap,
Are you using 11.1.2.1 Smart View? If yes, are you getting this issue while refreshing ??
If that is the case then go with 11.1.2.1.102.
http://john-goodwin.blogspot.com/2011/09/get-up-and-running-with-smartview.html
Cheers.!!!

Similar Messages

Error: List View Threshold. The number of items in this list exceeds the list view threshold, which is 5000 items.

Hi, i had created a SharePoint List in cloud ( office 365) using List Template.
List template contains 12000 items taken as template from SharePoint on Premise.
I am getting this error message, in SharePoint Online (Office 365)
The number of items in this list exceeds the list view threshold, which is 5000 items. Tasks that cause excessive server load (such as those involving all list items) are currently prohibited.
How to resolve it, to get data in my SharePoint list, any help will be appreciated.

With O365 lists over 5k items are now officially supported but they will have limited behaviour due to the threshold. There are no workarounds or options to increase the threshold either temporarily, for specific users or for the list itself as you have
with on-prem.
You'll need to remove enough items to get it below the threshold limit, add indexed columns to support indexed views, then re-add the items again. This article is for 2010 but the section around indexed columns and views is still accurate:
https://technet.microsoft.com/en-us/library/cc262813(v=office.14).aspx
It may be possible to add the indexes on your on-prem list where you can increase/avoid the threshold, then re-export the list. That would rely upon the list creation script adding indexes before it uploads items but it's a logical assumption.

Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
involving all list items) are currently prohibited.
Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
Prashanth

Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Setting the number of print lines in a Crystal 8.5 report

I want to be able to conditionally start a new page when the number of lines reaches a set amount. The report needs to print within the body of a preprinted report.
On a separate note, since Crystal changed from Business Objects it does not seem there is a knowledgebase that can be easily searched.

If you have any field in the details section that contains data then you can use the condition "NewPageAfter" that exist in section expert by right clicking on the details section and click on X+2 corresponding to "NewPageAfter" and write the condition like
remainder(recordnumber,10)=0
This prints the lines in a new page for every 10 records.
for 15 records then use this
remainder(recordnumber,15)=0
so on......
Regards,
Raghavendra

How to get the number of rows in a DB-Cursor

When i open a database cursor i do not know how much rows are stored in the cursor. To solve this problem i have to send a 'select count(1) ...' to get the number of rows before i set up the cursor. I think that this is not very clever and could possibly cause performance problems. But i need the num of rows to show the percentage of processed rows. Is there any other way to get the num of rows? May be by checking the cursor directly?
Please help!
Thanx a lot

In order to find out how may rows are going to be processed, oracle has to visit every row. So with a cursor, there is no property that will accurately reflect the number of rows until you get to the last one. That said, you could use
select count(*) over() as row_count, <rest of your columns> FROM <your table>
which will give you the total row count agaist each row in the result set. There are performance penalties involved but they will be less than issuing the query twice, once to get the count and once to get the rows.
Have a look on asktom for some very usefull info about all this.
HTH

How to get the number of rows in a ResultSet

Hello,
I'm an intern and I'm trying to get the number of rows from result set in oracle using rs.last() and rs.beforeFirst() methods
but I got an error. Could Below is my sample code:
import java.sql.*;
public class SarueckConnect {
public static void main(String[] args) {
Connection con = null;
Statement stmt = null;
ResultSet re = null;
String[] ParamArray;
ParamArray = new String[24];
//Properties logon;
try {
Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
con = DriverManager.getConnection
("jdbc:oracle:thin:@258.8.159.215:1521:test_DB","data","data"); //making the connection DB.
stmt = con.createStatement ();// Sending a query string to the database
//stmt.executeUpdate("UPDATE test_table set steuk = 6 WHERE steuk = 5");
ResultSet rs = stmt.executeQuery("SELECT mandt,kokrs,werks,arbpl,aufnr,vornr,ile01,"+
"lsa01,ism01,ile02,lsa02,ism02,ile03,lsa03,ism03,ile04,lsa04,ism04,steuk,matnr,budat,"+
"kostl,pernr,rueckid FROM test_table where steuk =6");
//Print the result out.
rs.last(); //This is the line which gives an error.
int rows = rs.getRow();
rs.beforeFirst();// I presume this is wrong to.
ParamArray = new String[24*rows];
int counter=0;
while (rs.next()) {
for (int i = 1; i <= 24; i++){
ParamArray[i-1+(counter*24)] = rs.getString(i);
System.out.print(rs.getString(i) + '\t');
System.out.println();
counter++;
} catch(Exception e) {
e.printStackTrace();
} finally {
try
if(stmt != null) stmt.close();
if(con != null) con.close();
} catch (Exception exception) {
exception.printStackTrace();
TryBapi sap = new TryBapi(ParamArray);
}When I run the code I do have the following ERROR Message:
java.sql.SQLException: Invalid operation for forward only resultset : last
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.driver.BaseResultSet.last(BaseResultSet.java:91)
at SarueckConnect.main(SarueckConnect.java:28)Please could any body Help me out here to figure out how to correct this?
Any Help would be highly apprecited.

make your result set scrollable...Not such a good idea. With Oracle, the JDBC driver will read and cache all the ResultSet in memory (with other DBMSs/drivers the behavior will probably be different, but you will still have some unnecessary overhead).
You can do the caching yourself if you think it's worth it. If the piece of code you posted is why you need this for, then use a List or Vector and you won't need to know the size upfront.
Alin,
The jTDS Project.

Restrict the number of records to be fetched

Hello Gents,
The situation is like this, I have a report on Oracle reports 6i which fetches 2+ million records and it takes lot of time to generate,
I’m not sure whether it can be handled in discoverer because the report has some validation procedures (Program Unit) and triggers.
I want to restrict the number of records to be fetched in groups; I have gone through of Oracle online help
1. Group Filer: Filter fetches all records from database and displays only the number of records which is set to the property
2. Maximum Rows to Fetch: This property fetches only the number of records which is set to the property.
I want to fetches records incrementally; I don’t want to keep resources busy
Is there any property similar like Discoverer “Retrieve data incrementally in groups of” or any workaround?
Help or any advice is appreciated

If you generate a pdf, it has to fetch all records for pdf.
If its in previewer: do you display total number of pages on the report?. If yes, >remove that and see how it comes. Other options are tunning queries and gather >the data into temp table before displaying it on the report. No, I'm generating a pdf
No, the report is not having display page no on it.
If I would have to create temp table, I would have used discoverer instead
Is there any property in reports to restrict the query to get the data in groups?
Any advice appreciated.

Size Limit of Result Set Exceeded in Advanced Analysis for Excel

I am getting a "Size Limit of Result Set Exceeded" error when performing a drill-down in Advanced Analysis for Excel. Is the limit 65,000 rows in Excel? I was able to get a drill-down of 39,000 rows to work, but failed when I exceeded 60,000 rows.
I am using Advanced Analysis for Excel v1 SP5 and Excel 2007.
Thanks.

Hi Everyone;
I am running advanced analysis reports on HANA as datasource and I am getting the message Size Limit of Result Set Exceeded whenever I have a larger output. I have noticed that in the admin guide and in other SCN posts about this setting in Windows Registry:
[HKEY_LOCAL_MACHINE\Software\SAP\AdvancedAnalysis\Settings\DataSource]
"ShowBicsSample"="True"
"ResultSetSizeLimit"="-1"
But I am having hard time finding this setting in my windows registry; can someone help me understand why I don't have it in my registry? and how to find it and change this setting?
FYI...I am using Office 2010.

How to set the number of rows displayed in a classical report at runtime?

Hi,
Our customer has several standard client hardware configuration and would like to enable end users to choose their 'display profile' at login time. This 'display profile' would contain predefined values for these hardware configurations and supposed to set various paramters that should define the number of rows displayed in a classical report region.
I tried to provide parameters on the report region but it refused to accept anything but numerical values. Is it possible to do this?
Regards, Tamas

The link is to the closest linkable point in the documentation to the description of the Number of Rows (Item) attribute.
It sounds like you have been trying to enter—unsuccessfully—an item name or substitution string into the Number of Rows attribute. The Number of Rows (Item) attribute is the one that actually allows you to do this. Click on the flashlight icon beside it to get a list of items from the application.

If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it !

If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T. When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.

If your phone service is disconnected, it's not your number any more.
If you "just got AT&T", how can it be disconnected?

IMessage is not working for my new number it will let me use the number the phone was originally set to and my email address but since I updated to iOS 7 it won't let me select my new number; it is just in grey

I just updated to iOS 7 and now my iMessages won't work. It just keeps saying activating iMessage but it's not doing anything; I tried signing in with my Apple ID but then it just lets me send them using my email address and the number the phone was originally set to; even though that is not my actual number that I use as I changed it through Vodafone so the SIM card now has a different number.
It won't even let me click on my number to select it; it is just that faded grey colour and there are no ticks by it;
And when it says "may be a standard SMS charge to activate" I'm not even getting a text through to be able to activate it anyway
How can I fix this?

http://theunlockr.com/2013/07/12/how-to-stop-your-email-from-showing-up-in-imess age-video/

When I air print from my iPad, I can't limit the number of pages. It just says print and the number of copies and I end up with way more than I want. How do I set it to limit the pages?

When I air print using FingerPrint from my ipad, it doesn't let me limit the number of pages, and I end up with more pages than I want. It asks if I want multiple copies, but it doesn't ask me number of pages, or which pages. Is there a way to do this?

When you use an AirPrint compatible printer, you get this option for page range. You are using your computer as the server in order to print, so you probably have to set the range on the computer. While you can print from your printer with this app, I assume that it doesn't give you the same control that you get directly from the iPad when using an AirPrint printer.
Read this from the FingerPrint support site. Selecting the page range would be part of the formatting of a print job.
http://fingerprint-support.collobos.com/knowledgebase/articles/66972-i-can-t-for mat-the-print-job

How do I set the number of simultaneous downloads? Per server?

iTunes always tries to download 3 podcasts at once, which leads to timeouts on podcast servers that limit the number of connections. That means I'm either missing episodes or else I need to manually babysit iTunes.
Is there a way to set the number of simultaneous downloads? I'm using XP.
Thanks.

You can turn simultaneous downloads off. In the downloads window, at the lower left. Also, while things are downloading, you can pause all but one or two.

Is there a way to set a limit on the number of characters each cell will hold in numbers?

Hi there, I'm creating a CSV file via Numbers and would like to set a limit to the number of characters a cell will hold in numbers. This way, when I copy text from my source, and paste it into the numbers cell, the text will be cut off at the character limit I've placed for that cell.
Specifically, I would like my character limit per cell in a column on a new spreadsheet to be 100 characters. I have text to copy & paste into roughly 10 different cells and I'd like it to all be 100 characters.
I am using Numbers version 9 of iWork and 10.7.5 OS.
Any help is appreciated.

Thank you t quinn for your reply as I do really appreciate the help.
I don't quite understand what your suggestion was and before I try to figure it out and play around with numbers, I thought I should clarify further. When i wrote I want to paste the content into the cell and have it limited to 100 characters I was mis-spoken. I actually have all the content already in the columns in a spreadsheet and would now like to just limit some of the columns to hold only 100 characters in a cell so that when its a CSV file it will be accepted to the program I'm trying to upload it to.
SO does that change the way you can answer my question?
Is there a way to just limit the content currently in a spreadsheet to 100 characters per cell?
Kindly

How to set the number of seconds (or time) a photo is displayed on a slideshow (ATV2)

Can I set the number of seconds a photo stays on the TV screen when I do a slideshow from my ATV2? Can't seem to find a setting on the Apple TV to do that. For the slideshow on the ATV2 I am choosing an Event from my iPhoto library and then choosing "slideshow" after adjusting the ATV2 settings for music and theme.

You can only set the time of slides with certain types of slideshows (i.e. classic and ken burns)

The number of POV to be set exceeds grid POV

Similar Messages

Maybe you are looking for