The online radion is no longer working after using...

i got E71 from Orange and i was using all it`s futures while i was using it with Orange sim but recetly i have changed the network to O2 and i have lost the use of online radio which i like very much. i have called nokia and o2 cc but they both blame each other for the problem, anyhow, my problem is still not solved, dose anyone have a similar problem or can someone please help here if you have the answer for it.
many thanks in advance.

Hey Simmons19,
Thanks for the question. I understand you are experiencing issues with the camera on your iPhone 5. The following article may help to resolve your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning or has undesired image quality
1. If the screen shows a closed lens or black image, force quit the Camera app.
2. If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
3. Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
4. Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
5. Try turning iPhone off and then back on.
6. Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
7. Try to remain steady while focusing:
- Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
- Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
8. If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks,
Matt M.

Similar Messages

Why are the back/forwards buttons no longer working after upgrade?

Hi, I recently upgraded from Firefox 3.5 (I believe) to Firefox 4.0.1 and now the back and forwards buttons no longer work. I tried resetting the settings under the toolbars > customize, etc. That didn't work. FYI, I'm using a mac. Any solutions? Thanks in advance...

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

T500 - Windows Update no longer works after using factory recovery disks.

I'm running Windows 7 32bit. I needed to restore my T-500 hard drive because of a fatal windows registry error caused by a 3rd party registry cleaner/tuner software... Windows 7 was DOA .
I used the factory recovery disks I created after I first fired up the laptop in April this year, all went well, Windows 7 booted up, and I went through the "Starting Widows for the first time" setup dialog, Windows 7 sucessfully activated... also verfifed it on the Microsoft website.
Went into control panel to have windows update pull down all of the critical updates released after I got my Thinkpad and I got a pop up saying "windows update cannot currently check for updates because the service is not running. You may need to restart your computer."
I checked... the windows update service is running, so is BITS. Following suggestions from Microsoft support, I have 1)deleted the softwaredistribution folder from C:\windows, 2) run their "fixit tool", 3) renamed the CatRoot2 folder in C:\windows'system32, all to no avail each time I tried to use windows update after each "fix".
I decided to check here if anyone here has gone down this path before and ask what fixed it?
I'm waiting for Microsoft support to reply to my last email informing them the last instructions to rename the CatRoot2 folder and retry windows update failed. They now have a copy of my windowsupdate.log file sent to them.
How about it... does this situation sound familiar to anyone?
Thanks.

I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
This solution worked for me:
    Running check for updates will trigger this error message:
“Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”
Solution:
1.    Go to Administrative Tools/Services, and stop the Windows Update service.
2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
4.    Then manually run the Update Service and everything should work.

Windows Update no longer works after using Lenovo Enhanced Recovery

Using the system recovery backup disk I created when I first got my T500, I performed a recovery to a new larger HD that I'm upgrading to.
All went well, windows booted up and I got the "Starting Windows for the first time" message and then I went through the setup wizard... Did everything like I did when first got the T500. Windows 7 activation was successful
Now here's the rub, I tried to use Windows Update retrieve all of the updates released since April when my laptop was built. Windows Update flat out refuses to work. I keep getting a pop-up box saying "windows Update cannot currently check for updates, because the service is not running. You may need to start your computer".
I checked the Windows Update service, it's running. I've gone into the windows folder and deleted the software distribution folder as instructed by Microsoft support. They wanted me to also download and install a "CheckSUR" tool from their support website, but the install falls with a a pop-up from Windows Update Standalone Installer with an error: 0xc8000247.
Now this is all on the new HD, when I swap the older on back in there is no problem getting the updates.
I'm stuck, has anyone encountered this type of thing with Windows Update?

I executed the "fixit" in both modes at http://support.microsoft.com/kb/971058
Windows update still refuses to work. All pertinent services are running.
Since this is an attempt at installing a larger hd, I swapped back to the original drive and verified that windows update has no problems when running on the original HD.
I've now started again from scratch.
I put the new larger HD in a SATA/USB HD docking station that I just bought. I formatted the new HD clean, then instead of using the factory recovery disks like I did before, I used Acronis True Image, which I downloaded from the Western Digital support webpage, to clone the original HD over to the new one.
I powered off the laptop, pulled the original HD out and put the new HD in , unplugged the now empty SATA/USB HD docking station, booted up, windows starts and comes up with all looking fine, except... again, windows update still refuses to work.
I went back to the Microsoft website above, ran the fixit action in aggressive mode, and windows updates still gets the same result... When I open windows update in control panel, Windows Update is in red. When I check for updates, I get the pop-up saying "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer".
A check of services shows that Windows Update, Cryptographic Service and Background Intelligent Transfer Service are all started.
This is really frustrating... this should be a simple HD upgrade. It appears that with whatever means that is used to copy or place an image of the original HD on the new HD, Windows 7 is not going to let me use update on the new drive.

After updating to iOS 8 the AV connector is no longer working,

after updating to ios 8 the av connector is no longer working, I use this to teach the iPad and it is frustrating to not be able to use the connector which worked perfectly well on ios 7
<Re-Titled By Host>

Hey Mastmate,
Thanks for the question. There is a troubleshooting section in the following resource that may help to resolve your issue:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/ht4108
Thanks,
Matt M.

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

HT202157 Apple TV No Longer Works after the most recent update (2.1.13)

Why can I no longer access the movies and tv shows I’ve already purchased in iTunes after the update? It was not until the most recent update as on 2/1/13 that I started having this issue. Please correct this so I can use what I paid for. Thanks

Same problem here, Apple, I'm pretty upset at the moment. My daughter's 12th birthday, and she wants to watch a movie we purchased through your software.
We love the normal apple usage...but, since your hardware and software are so stringently ruled...I have some expectations on the fact that it will actually work after the updates.
Customer service outside the apple store has been suspect for some time.
Please step up here, we've invested quite a lot in you, and we're feeling a bit let down at the moment.
No notice, no warnings, for all the messages you do send out, "hey the stuff you bought from us and can only play it back on us isn't going to be working for a while"...would be nice.
Or just fix it.
Scott West

After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But wont work anywhere now

After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works. Just a white screen with the web address for Apple iPod support. Worked fine when hooked up to iPod jack in car. But won't work anywhere now. I tried re-setting but has not worked. Any ideas would be appreciated.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

My telus email no longer works after installing the new os Yosemite

my telus email no longer works after installing the new os Yosemite

This is a problem between Telus and Yosemite. Telus, of course, blames Apple.
Check the box that says "Allow insecure authentication" That will get your email working.
However, this box will get un-checked when you stop start Mac Mail. The next time you start Mail, you'll have to re-check it for each Telus account. (This is the bit that Apple needs to fix.)

After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes

After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future & get the CD/DVD drive working again? if I delete the upper / lower registry keys what other functions are impacted? I see others say itunes asks for a reinstall...then same problem all over again! THX

Have you revieved this support document?
TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

After installing OSX Lion, the built-in camera no longer works. Solution?

After installing OS X Lion on a late 2010 MacBookPro, the built-in camera no longer works. Worked beautifully with Snow Leopard. Reset SMU to no avail. Any solutions?

Hi, Thanks for the reply, I really appreciate your help with this.
Yes to both questions: iMovie is in the Applications folder, not in any subfolders. And I have reinstalled iMove from the original disc (before and after the OS reinstall) but can only get up to 7.1.4 without buying a later edition of iLife.
The camera definitely worked under Snow Leopard but not since I upgraded from SL to Mountain Lion.
Found the following on this forum:
If you have iLife '09 or older, there have been no iPhoto 8, iMovie 8 or
Garageband 5 (or older) updates relating to Lion or Mountain Lion. The
support and compatibility situations for those versions is unknown as
Apple hasn't said anything. We can only determine compatibility
anecdotally. If it turns out that there is a problem and Apple doesn't
release an update, your only recourse is to buy the latest version of
the application.
I reinstalled some other iLife apps as well. iDVD went missing after the ML reinstall. When I reinstalled it from the original disc, it wouldn't open and I had to download a manual update to get it working. iWeb previously stopped working after the upgrade to ML (all the menu options were greyed out) but when I reistalled it (together with iMove and iDVD) yesterday, it started working again.
All this seems to point to a compatibilty issue between iLife '08 and ML.

My photoshop CS 3 no longer works after my free trial ended.The serial number of CS3 wasn't recognised.

my photoshop CS 3 no longer works after my free trial ended.The serial number of CS3 wasn't recognised.

Try uninstalling all versions of Photoshop then run the Adobe cleaner to make sure all traces are removed.
Now install cs3 at this point your serial number should work.

The online radion is no longer working after using...

Similar Messages

Maybe you are looking for