The percentage of available space in the file system /home/SIDadm is low???
The percentage of available space in the file system /home/SIDadm is low (8.404541015625 percent)
I listed the directories in the file system
plaixlps089:dv2adm 5> ls
VertexDB dev_rfc startbc.sh
VertexVTXD lib startdb.log
WmRepository2 logs startsap_DVEBMGS01.log
abin lost+found stopdb.log
bin mbox stopsap_DVEBMGS01.log
config nohup.out trans.log
datastore scripts
dev_dpmon sqlnet.log
Can we delete some of the files inside any of the directories???
help appreciated
Dear Ameya,
Yes you can delete the dev_rfc (Developer rfc traces). You may check the below links for more info on Dev traces in general and how to disable it:
Developer Traces:
http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/8311664bc511d189750000e8322d00/content.htm
Activating and Deactivating Developer Traces:
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/3723f3d41b41a9bc2ec54d03618948/content.htm
Please mark the question as answered if my post(s) solved your question.
Regards,
Veera
Similar Messages
-
The percentage of free space is remain unchanged after extend data file.
I have alter database and extend datafile (applsysd03.dbf), the free size is larger than before, but don't know why the percentage (MAX_PER_FREE) is remain unchanged.
FILE_NAME TABLESPACE TOTAL USED FREE PER_FREE MAX_SIZE MAX_FREE MAX_PER_FREE
applsysd03.dbf APPLSYSD 3000 1637.9 1362.1 45.4 2000 362.1 18.1
applsysd03.dbf APPLSYSD 1900 1637.9 262.1 13.8 2000 362.1 18.1
Here is the my scripts:
select b.file_name File_name,
b.tablespace_name Tablespace,
b.bytes/(1024*1024) Total,
round((b.bytes - sum(nvl(a.bytes,0)))/(1024*1024),1) Used,
round(sum(nvl(a.bytes,0))/(1024*1024),1) Free,
round((sum(nvl(a.bytes,0))/(b.bytes))*100,1) per_Free,
round(decode(b.maxbytes,0,b.bytes,b.maxbytes)/(1024*1024),1) Max_Size,
round((sum(nvl(a.bytes,0)) + decode(b.maxbytes,0,0,b.maxbytes-b.bytes))/(1024*1024),1) Max_Free,
round((((sum(nvl(a.bytes,0)) + decode(b.maxbytes,0,0,b.maxbytes-b.bytes))/(1024*1024)) / (decode(b.maxbytes,0,b.bytes,b.maxbytes)/(1024*1024))) * 100,1) Max_per_Free
from sys.dba_free_space a,sys.dba_data_files b
where a.file_id(+) = b.file_id
and exists (
select file_id,recent_record
from ( select file_name,file_id,tablespace_name, max(file_id) over (partition by tablespace_name) recent_record
from sys.dba_data_files
where tablespace_name in ('ALRD','ALRX','APPLSYSD','APPLSYSX','APD','APX','ARD','ARX','CAPD','CAPX','CARD','CARX','CFNDD','CFNDX','CGLD','CGLX','CINVD','CINCX','CPOD','CPOX','CQCD','CQCX','CTXD','GLD','GLX','HRD','HRX','ICXD','ICXX','INVD','INVX','POD','POX','RGD','RGX','CWPLD','CWPLX','CSYND','CSYNX')
) t
where t.file_id = t.recent_record
and t.file_id = b.file_id
group by b.tablespace_name, b.file_name, b.bytes,b.maxbytes
order by 9
Any clues?
FANTo summarize - you want to see what percent of the maximum datafile space is free.
If the maxbyes <= bytes (size of the datafile) it will never autoextend. So, the max size is the current datafile size.
If the maxbytes >bytes, the max available space is the maxbyes.
So, the calculation would be:
max_percent_free = (max_size - used) / (max_size)
where max_size is either maxbytes or bytes (current datafile size).
In the first case, where datafile is 1900 meg that would be:
max_percent_free = (2000-1637) / (2000) = 18% - we use maxbytes since it is 2000, greater than the file size (1900)
After increasing the size to 3000
max_percent_free = (3000-1637) / 3000 = 45% - we use file size, 3000, since it is larger than maxbytes (2000)
If you would set maxbytes to 5 gb
max_percent_free = (5000-1637)/5000 = 67%
Does that make sense? -
What happens when an iPod is synchronized with an iTunes library that is bigger than the available space on the iPod? I did this some time ago. On screen was shown available space somewhat less than 120 GB, but maybe somewhere between 10 and 20 GB more in the library. I had to get the iPod updated anyway, so I did proceed. However, afterwards the total content of the library was only about 110 GB. Now I wonder what did actually happen. Was the first sign only corrected for double copies of the same files or lost files or where files deleted from iTunes? And if files where deleted from iTunes, were they also deleted from my computer?
Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.
-
When I try to download this I get a message that says I haven't got sufficient space on my startup disk. I have checked my available space on the disc and I have only 3GB free out of 500. I have hardly anything on my mac - how can this be?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
[solved] scritpt to check the used space of different file systems
how to write a scritpt to check the used space of different file systems and print if any file system above 50%
I used this command to get the different filesystem and their used space
df -h | grep -v Filesystem |tr -s " " | cut -d" " -f1,5
Thanks in AdvancePlease try this command:
df -Ph | tr -s " " | cut -d" " -f1,5 | sed -n "s/\([5-6][0-9]%\)\|\([0-9]\{3\}%\)/&/p"
It works for me. Good luck
Tiger Zhang
. -
By adding an external hd to time capsule does it increase the size of available space for time machine back-ups?
No, each drive is treated separately. Sorry!!
-
We are getting the below error when we see in Crawl logs
"The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error."
This is happening in FAST search.
Here I can see soke of the logs related to this search crawl.
Could anyone please help on this?
web application 'http://xvy/' doesn't use search application 'FAST Query SSA', skipping it.
ABC\sp_search' on web application 'http://xvy/'. 2d7dba01-3d2e-4903-b59f-9a8601627bcd
07/30/2014 01:30:46.65 OWSTIMER.EXE (0x28DC) 0x1BC0 SharePoint Server Search Administration
dl2m Verbose Search application 'Search Service Application 1': Skipping web application '48ed7882-9f70-424e-bf72-e3c9f5340b97' because its outbound url 'http://ebc:30347' was automatically added once.
Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcp/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' because its outbound url 'http://nvcp' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcp' for web application '57718ea1-8cb5-4adc-abd2-9e55415e5791' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABc\sp_search' on web application 'http://nvcp'ext/'. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application '64d562a1-535e-4917-8979-88840e2a67fe' because its outbound url 'http://nvcp'ext' was automatically added once. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://nvcpext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. 85041609-d618-4132-ac8e-195a910d99a0
07/30/2014 01:31:46.53 OWSTIMER.EXE (0x28DC) 0x05F4 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvcpnew/'. 85041609-d618-4132-ac8e-195a910d99a0
executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.31 mssearch.exe (0x0588) 0x1DE4 SharePoint Server Search Propagation Manager
e3o3 Verbose executing SQL query {? = call dbo.proc_MSS_PropagationIndexerGetReadyQueryComponents} [propdatabase.cxx:70] d:\office\source\search\native\ytrip\tripoli\propagation\propdatabase.cxx
07/30/2014 01:32:04.68 mssdmn.exe (0x15CC) 0x1060 SharePoint Server Search HTTP Protocol
Handler du4i 0x29E4 SharePoint Server Search HTTP
Protocol Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x29E4 SharePoint Server Search HTTP Protocol
Handler du54 High CHttpAccessorHelper::InitRequestInternal - unexpected status (503) on request for 'http://ppecpnew/robots.txt' Authentication 0. [httpacchelper.cxx:703]
d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x130C SharePoint Server Search Gatherer
cd11 Warning The start address http://nvcp'/sites/quipme cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details:
The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/robots.txt'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
07/30/2014 01:32:04.70 mssdmn.exe (0x15CC) 0x104C SharePoint Server Search HTTP Protocol
Handler du54 High
07/30/2014 01:32:04.70 mssearch.exe (0x0588) 0x2948 SharePoint Server Search Gatherer
cd11 Warning The start address
http://nvcp'/sites/MDPPubng cannot be crawled. Context: Application 'FAST_Content_SSA', Catalog 'Portal_Content' Details: The crawler could not communicate with the server. Check that the server is
available and that the firewall access is configured correctly. If the repository was temporarily unavailable, an incremental crawl will fix this error. (0x80041200)
CHttpProbeHelper::ProbeServer: InitRequest failed for 'http://ppecpnew/_vti_bin/sitedata.asmx'. Return error to caller, hr=80041200 [stscommon.cxx:490] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvg0 High STS3::COWSServer::InitializeClaimsCookie: Probing url 'http://pncvr' failed. Return error to caller, hr=80041200 [sts3util.cxx:1332] d:\office\source\search\native\gather\protocols\sts3\sts3util.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
en0e High CSTS3Accessor::InitURLType: Return error to caller, hr=80041200 [sts3acc.cxx:2214] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dv3p High CSTS3Accessor::GetServer fails, Url sts4://pnvpr/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3acc.cxx:185]
d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb1 High CSTS3Accessor::Init fails, Url sts4:/mngbv/siteurl=sites/product/siteid={7ebfb072-08a8-4df7-8f74-e06730325d9a}/weburl=/webid={bd7ae724-1256-4b26-9633-416447d6bc5c}, hr=80041200 [sts3handler.cxx:312]
d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.06 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du2z Verbose CHttpProbeHelper::ProbeServer: Probing server with url 'http://pnvpr/_vti_bin/sitedata.asmx'. [stscommon.cxx:476] d:\office\source\search\native\gather\protocols\common\stscommon.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x193C SharePoint Server Search PHSts
dvb2 High CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80041200 [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
07/30/2014 01:32:26.08 mssdmn.exe (0x15CC) 0x16FC SharePoint Server Search HTTP Protocol
Handler du4i Verbose CHttpAccessorHelper::InitRequestInternal - opening request for '/_vti_bin/sitedata.asmx'. [httpacchelper.cxx:353] d:\office\source\search\native\gather\protocols\http\httpacchelper.cxx
earch application 'FAST Query SSA': Adding start address 'http://mnvfgext' for web application '64d562a1-535e-4917-8979-88840e2a67fe' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dmb6 Verbose Ensure full read access to the indexing account 'ABC\sp_search' on web application 'http://nvpr/'. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2m Verbose Search application 'FAST Query SSA': Skipping web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' because its outbound url 'http://pnvpr' was automatically added once. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2n Verbose Search application 'FAST Query SSA': Adding start address 'http://pnvpr' for web application 'cea7b67b-fd5f-4c9a-a300-64a7d7ca3093' to list of valid start addresses. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://abcrsp/' doesn't use search application 'FAST Query SSA', skipping it. a6b7948a-dc16-419d-b58a-0ee798a0bb9c
07/30/2014 01:32:46.53 OWSTIMER.EXE (0x28DC) 0x1444 SharePoint Server Search Administration
dl2k Verbose web application 'http://excb/' doesn't use search application 'FAST Query SSA', ski
Anil LokaHi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
I have been a Quicken user for many years but have heard that the move to Yosemite is a Quicken nightmare - so I'm trying to research new software. I'm overwhelmed by the number of available programs, all the things that each program can do and perplexed by the arguments for and against each feature in each program.
My needs are relatively simple for my small business: 1) I need to be able to import years worth of Quicken data into the new program 2) I need to easily print checks 3) I need to easily reconcile my checking account each month and 4) I need to generate basic reports for my accountant (e.g. P & L statements, category summaries).
I have been a FileMaker user since 1.0 so I don't need (or want) A/R, A/P, inventory management, invoicing, etc.
I just need a solid, dependable electronic checkbook per above.
Suggestions?Bobreba wrote:
I am using Quicken Essentials 1.7.4 on a [Mac Pro, 2.8 Ghz Quad Core Intel Xeon with 16 Gb of memory], running 10.7.5. I am in the process of upgrading everything to work on Yosemite and Quicken seems to be the most difficult problem to overcome.
Thanks for your response and feedback.
I would recommend you continue with Quicken Essentials. As noted by others, it performs well on Yosemite.
My personal experience is Quicken 2007 for Mac also on 10.7.5 (with many reports of it both updated and successfully running on Yosemite) and I personally would not touch Quicken Essentials with a 10 foot pole -- BUT, if it ain't broke for you, don't fix it! -
Treo 755p The free data storage space on the device is low. Some data could not be saved
After having the Treo 755p device for only a week, I am receiving a message "The free data storage space on the device is low. Some data could not be saved." I have over 55 mb of free space according to the device info page. I cannot find anything about this in the knowledge library, can anyone offer help?
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)My problems are similar to Lauren, but backwards. For months now I have had problems with my Treo 755 reseting randomly. Sometimes during calls, sometimes while typing, sometimes while just sitting in the holster. As many as a dozen a day and then not at all for 2 weeks, no rhyme nor reason. This Free Space error though is brand new to me today and quite strange. The error is showing up when I bring my phone out of "sleep". I press the end button to sleep the phone and everything is fine. When I press it again to wake the phone up the error is sitting behind the keylock waiting for me.
Obviously I have done nothing yet for this new memory error, but I've tried everything for the reseting. Deleting software, Soft and hard resets, software updates, everything I and Sprint support can think of. With this new Free space error now I am going to just take it to a service center and demand a new phone. I think there is some kind of hardware error as I have done nothing in the programming. No new programs, no deleted programs, no changed settings.
I loved my Treo 650 and never had any problems with it. I am getting very disappointed in Palm now though with these ridiculous problems.
Post relates to: Treo 755p (Sprint) -
How to add more disk space into / root file system
Hi All,
Linux 2.6.18-128
can anyone please let us know how to add more disk space into "/" root file system.
i have added new hard disk with space of 20GB,
[root@rac2 shm]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 965M 767M 149M 84% /
/dev/hda7 1.9G 234M 1.6G 13% /var
/dev/hda6 2.9G 69M 2.7G 3% /tmp
/dev/hda3 7.6G 4.2G 3.0G 59% /usr
/dev/hda2 18G 12G 4.8G 71% /u01
LABLE=/ 2.0G 0 2.0G 0% /dev/shm
/dev/hdb2 8.9G 149M 8.3G 2% /vm
[root@rac2 shm]#Dude! wrote:
I would actually question whether or not more disks increase the risk of a disk failure. One disk can break as likely as one of two of more disks.
Simple stats. Buying 2 lottery tickets instead of one, gives you 2 chances to win the lottery prize. Not 1. Even though the odds of winning per ticket remains unchanged.
2 disks buy you 2 tickets in The-Drive-Failure lottery.
Back in the 90's, BT (British Telecom) had a 80+ node OPS cluster build with Pyramid MPP hardware. They had a dedicated store of scsi disks for replacing failed disks - as there were disk failure fairly often due to the number of disks. (a Pryamid MPP chassis looked like a Xmas tree with all the scsi drive LEDs, and BT had several)
In my experience - one should rather expect a drive failure sooner, than later. And have some kind of contingency plan in place to recover from the failure.
The use of symbolic links instead of striping the filesystem protects from the complete loss of the enchilada if a volume member fails, but it does not reduce the risk of loosing data.
I would rather buy a single ticket for the drive failure lottery for a root drive, than 2 tickets in this case. And using symbolic links to "offload" non-critical files to the 2nd drive means that its lottery ticket prize is not a non-bootable server due to a toasted root drive. -
Increase available space in the disk
If we delete music files, photos, etc we should obtain more space available in the disk. I have deleted music files and photos and my free space available didn't increase neither my used space decreased. WHY? Deleting files isn't enough to get more space ? What I need to do to obtain more free space available and less used space? Thanks in advance for your support and quick reply.
56,7MB and free space 55,62GB
This is correct for an empty iPod. The 56.7Mb is used by the iPod operating system and Extras that are loaded on the iPod.
55.6GB free is correct for an empty 60GB iPod.
There's always a discrepancy with hard drive capacity due to the different ways in which hard drive manufacturers and computer manufacturers measure hard disk space. The difference is due to a decimal vs. binary measurement.
Hard Drive manufacturers consider a Gigabyte to be 2^30 bytes (1,073,741,824 bytes) whereas the computer manufacturer reports a gigabyte to be 10^9 bytes (1,000,000,000 bytes). -
How to calculate the percentage of free space for a table in Oracle
okay, I am a little confused here. I have been searching the web and looking at a lot of documents. What I basically want to find out is this, how do I calculate the difference between the number of bytes a table is using and the total bytes allocated to a table space (going that way to get percent free for a particular table). So I need a byte count of a table and total table space and the percentage difference. I have been looking at the DBA_TABLES DBA_TABLESPACES and DBA_SEGMENTS views. I have tried to calculated the space as num_rows * avg_row_len (if I am wrong, let me know). I have been trying to compare that calculation to the number in DBA_TABLESPACES and DBA_SEGMENTS. I am just looking for the total space allocated to the table space that the table sits in (seem logical right now) to make the percentage value work. Thus I want to be able to track the table as it grows as compated to the table space it sits in to see a value as it changes over time (days, weeks, etc.) each time I run this script I am working on.
Can someone get me straight and help me to find out if I am looking in the right places. Any advice would help.
EdwardYou can use a little modified version of dbms_space from Tom, show_space. Have a look,
SQL> create table test222 as select * from all_objects;
Table created.
SQL> delete from test22 where rownum<=100;
delete from test22 where rownum<=100
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> delete from test222 where rownum<=100;
100 rows deleted.
SQL> analyze table test222 compute statistics;
Table analyzed.
SQL> create or replace procedure show_space
2 ( p_segname in varchar2,
3 p_owner in varchar2 default user,
4 p_type in varchar2 default 'TABLE',
5 p_partition in varchar2 default NULL )
6 -- this procedure uses authid current user so it can query DBA_*
7 -- views using privileges from a ROLE and so it can be installed
8 -- once per database, instead of once per user that wanted to use it
9 authid current_user
10 as
11 l_free_blks number;
12 l_total_blocks number;
13 l_total_bytes number;
14 l_unused_blocks number;
15 l_unused_bytes number;
16 l_LastUsedExtFileId number;
17 l_LastUsedExtBlockId number;
18 l_LAST_USED_BLOCK number;
19 l_segment_space_mgmt varchar2(255);
20 l_unformatted_blocks number;
21 l_unformatted_bytes number;
22 l_fs1_blocks number; l_fs1_bytes number;
23 l_fs2_blocks number; l_fs2_bytes number;
24 l_fs3_blocks number; l_fs3_bytes number;
25 l_fs4_blocks number; l_fs4_bytes number;
26 l_full_blocks number; l_full_bytes number;
27
28 -- inline procedure to print out numbers nicely formatted
29 -- with a simple label
30 procedure p( p_label in varchar2, p_num in number )
31 is
32 begin
33 dbms_output.put_line( rpad(p_label,40,'.') ||
34 to_char(p_num,'999,999,999,999') );
35 end;
36 begin
37 -- this query is executed dynamically in order to allow this procedure
38 -- to be created by a user who has access to DBA_SEGMENTS/TABLESPACES
39 -- via a role as is customary.
40 -- NOTE: at runtime, the invoker MUST have access to these two
41 -- views!
42 -- this query determines if the object is a ASSM object or not
43 begin
44 execute immediate
45 'select ts.segment_space_management
46 from dba_segments seg, dba_tablespaces ts
47 where seg.segment_name = :p_segname
48 and (:p_partition is null or
49 seg.partition_name = :p_partition)
50 and seg.owner = :p_owner
51 and seg.tablespace_name = ts.tablespace_name'
52 into l_segment_space_mgmt
53 using p_segname, p_partition, p_partition, p_owner;
54 exception
55 when too_many_rows then
56 dbms_output.put_line
57 ( 'This must be a partitioned table, use p_partition => ');
58 return;
59 end;
60
61
62 -- if the object is in an ASSM tablespace, we must use this API
63 -- call to get space information, else we use the FREE_BLOCKS
64 -- API for the user managed segments
65 if l_segment_space_mgmt = 'AUTO'
66 then
67 dbms_space.space_usage
68 ( p_owner, p_segname, p_type, l_unformatted_blocks,
69 l_unformatted_bytes, l_fs1_blocks, l_fs1_bytes,
70 l_fs2_blocks, l_fs2_bytes, l_fs3_blocks, l_fs3_bytes,
71 l_fs4_blocks, l_fs4_bytes, l_full_blocks, l_full_bytes, p_partition);
72
73 p( 'Unformatted Blocks ', l_unformatted_blocks );
74 p( 'FS1 Blocks (0-25) ', l_fs1_blocks );
75 p( 'FS2 Blocks (25-50) ', l_fs2_blocks );
76 p( 'FS3 Blocks (50-75) ', l_fs3_blocks );
77 p( 'FS4 Blocks (75-100)', l_fs4_blocks );
78 p( 'Full Blocks ', l_full_blocks );
79 else
80 dbms_space.free_blocks(
81 segment_owner => p_owner,
82 segment_name => p_segname,
83 segment_type => p_type,
84 freelist_group_id => 0,
85 free_blks => l_free_blks);
86
87 p( 'Free Blocks', l_free_blks );
88 end if;
89
90 -- and then the unused space API call to get the rest of the
91 -- information
92 dbms_space.unused_space
93 ( segment_owner => p_owner,
94 segment_name => p_segname,
95 segment_type => p_type,
96 partition_name => p_partition,
97 total_blocks => l_total_blocks,
98 total_bytes => l_total_bytes,
99 unused_blocks => l_unused_blocks,
100 unused_bytes => l_unused_bytes,
101 LAST_USED_EXTENT_FILE_ID => l_LastUsedExtFileId,
102 LAST_USED_EXTENT_BLOCK_ID => l_LastUsedExtBlockId,
103 LAST_USED_BLOCK => l_LAST_USED_BLOCK );
104
105 p( 'Total Blocks', l_total_blocks );
106 p( 'Total Bytes', l_total_bytes );
107 p( 'Total MBytes', trunc(l_total_bytes/1024/1024) );
108 p( 'Unused Blocks', l_unused_blocks );
109 p( 'Unused Bytes', l_unused_bytes );
110 p( 'Last Used Ext FileId', l_LastUsedExtFileId );
111 p( 'Last Used Ext BlockId', l_LastUsedExtBlockId );
112 p( 'Last Used Block', l_LAST_USED_BLOCK );
113 end;
114
115 /
Procedure created.
SQL> desc show_space
PROCEDURE show_space
Argument Name Type In/Out Default?
P_SEGNAME VARCHAR2 IN
P_OWNER VARCHAR2 IN DEFAULT
P_TYPE VARCHAR2 IN DEFAULT
P_PARTITION VARCHAR2 IN DEFAULT
SQL> set serveroutput on
SQL> exec show_space('TEST222','SCOTT');
BEGIN show_space('TEST222','SCOTT'); END;
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SCOTT.SHOW_SPACE", line 44
ORA-06512: at line 1
SQL> conn / as sysdba
Connected.
SQL> grant sysdba to scott;
Grant succeeded.
SQL> conn scott/tiger as sysdba
Connected.
SQL> exec show_space('TEST222','SCOTT');
BEGIN show_space('TEST222','SCOTT'); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'SHOW_SPACE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
SQL> exec scott.show_space('TEST222','SCOTT');
PL/SQL procedure successfully completed.
SQL> set serveroutput on
SQL> exec scott.show_space('TEST222','SCOTT');
Unformatted Blocks ..................... 0
FS1 Blocks (0-25) ..................... 0
FS2 Blocks (25-50) ..................... 1
FS3 Blocks (50-75) ..................... 0
FS4 Blocks (75-100)..................... 1
Full Blocks ..................... 807
Total Blocks............................ 896
Total Bytes............................. 7,340,032
Total MBytes............................ 7
Unused Blocks........................... 65
Unused Bytes............................ 532,480
Last Used Ext FileId.................... 4
Last Used Ext BlockId................... 1,289
Last Used Block......................... 63
PL/SQL procedure successfully completed.
SQL>http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5350053031470
I use this to find the space allocations.
Just read your post again,this is not going to show you the percentage of the free/used space. This is going to be the number of blocks which are free/used. For the growth trend, you can look at (in 10g) Oracle EM. It has added now,Segment Growth Trend report which can show you for each object,comparing to the allocated space to the object,how much space is being used by it.
HTH
Aman.... -
Downloading a pdf file, the name of the file contains a space in the middle of the file. The name showing on the 'Save' popup is the first few letters up to the space. Works fine on IE8. For instance, a file named "old snail_12345.pdf" would only show "old" (ignore the "s). This is on Firefox 30.0, WinXP Pro.
Is this a problem when you are viewing the file in Firefox's built-in PDF Viewer and using its download button, or when you are using a download button in a web page?
I've seen this problem occur when the server is pushing a different file name than the actual file name (for example, the file name is pdf.asp?id=12345 but the server is sending the name Annual Report.pdf in the headers sent with the file). I'm not aware of a workaround for the user, but for what it's worth, it is easy to fix on the server by replacing the spaces with %20 (the standard substitution used in web addresses). -
The WEP Password to access wifi from Time Warner cable is 12 numbers and letters followed by 14zeros. The available space to input password is unequal to the task? Time Warner advised to call Apple. Any one with a suggestion on how to either 'customize' WEP or expand available password input space? Better ideaS?
wjosten - I was using a WEP password of greater than 13 characters with no problem.
Mondayblues - Are you saying that you cannot set your own password for your router/modem? You should be able to access it from an ethernet connected computer and change the password to suit yourself. If it's not more than about 4 years old, you should be able to use WPA instead of WEP, which is much more secure. Google "time warner modem yourmodel" to find the user manual and the URL to access the modem. -
What are the limits of available space for a document on Pages?
Hi, I use Microsoft Office Word and I have a problem.
I have a Word file of 48,000 pages, but I do not support, around 30 to 32,000 pages literally mad.
Apparently more than 32 MB, which is the limit of width of document writing with Word.
Let me know if Pages, the Apple Macintosh writing program, has the same limit of 32 MB or even larger documents can support, because then switch to that.
Thanks.Microsoft Word will easily work on documents larger than 48,000 pages (you can create documents of poractically unlimited size). It's best not to exceed 2,000 pages in a single file: although you can go to 5,500 or so if you have a sufficiently powerful computer. The old "32 MB" limit no longer applies: that was a limitation of the file system way back, and applied only to the "text" portion of the file, not the graphics. On 64-bit OS X or Windows you can go way above that if your disk is fast enough.
However, as mentioned by the other poster, it really isn't a good idea to allow a document to get that large. Research proves that the ability of someone to use a document deteriorates rapidly when it passes 250 pages, so at that point, you should be looking to redesign your publication.
It is also true that a 48,000-page document represents 96 man-years of effort, well over ten million dollars of investment. When you have that much investment at risk, it is essential to have at least one highly-skilled Documentation Engineer on the project, because the difficulty of creating such a document rises quite sharply with size and complexity.
Microsoft Word will do documents this size, and so will Adobe FrameMaker. Each of them requires high skills to use effectively on such large projects.
If you care to hop on over to here:
http://www.officeformac.com/ProductForums/Word/
We will be happy to show you how to do this in Word.
Cheers
John McGhie
Microsoft MVP [Word and Word:Mac]
Maybe you are looking for
-
Hi, I am getting one Error Message, When I create a Vendor(90001) in Xk01. The Error Message is .. Enter a Number Between A and ZZZZZ. but some other vendor has created with number(80001) only Please Revert Back. Thanks & Regards, Dhanush.S.T
-
Attempting safe boot--gray screen stuck with apple symbol--
So, left Imac on over weekend with Itunes playing in continuous mode--when I got home (about 36 hrs later) the screen was good but Itunes had locked up and was the Imac was making a stuttering sound (not like a hard drive clicking but like the songs
-
Anyone gotten a self encoded H.264 video to work yet?
I'd like to know if anyone out there has been able to successfully play a video encoded with H.264 that you encoded yourself (not from the music store) I've only been able to get MPEG4 videos to work, even when I set the encoding options identical to
-
Looking for BPA training in EMEA
Hi all, I am looking for courses or other events providing in-depth training of the BPA tool. Living in Norway so events should be held in Europe. Have been looking for it a while now, without any luck. Does anyone of you know of a scheduled/planned
-
Bookmarks in Bookmarks Bar Disappeared Since Firefox Update
Recently updated to Firefox 2.0.0.13 and since then, an odd thing happens. My initial window is okay, but if I open a new window - or a new tab - my bookmarks don't show up in my bookmarks bar. If I look under "View" I can see that "Bookmarks Toolbar