The pitcure on the play screen front left is larger 50% more than the edit screen right side is zoomed in.

Hello Whats up with cs6??Is it me or is it the cs6.. QUESTION On the front right screen the recorded picture that I want to send over to the right edit side is just what I want but when I send it over it gets zoomed in50% closer than the original. WHY? and HOW DO I CHANGE THIS?

First of all, let's get some terminology straight. That may actually help you understand what's going on. The monitor on the left that you refer to as the "play side" is called the Source Monitor because it shows source clip. It always shows clips at their native resolution (e.g., 1920 x 1080 or 720 x 480). And unless you have applied master clip effects, it shows them exactly as they came off of the camera or out of whatever app wrote them.
The monitor on the right that you refer to as the "transfer side" is the Program Monitor. It shows a composite of whatever is under the playhead in the sequence that's loaded in the active Timeline panel. If a source clip's resolution does not match the height & width of the sequence settings, then it will appear either zoomed in, where you can see only the center of the image, or zoomed out, where the frame is surrounded by black (or the layer underneath it).
From the way you describe the problem, I'm not sure whether the Program Monitor is zoomed in our out, which means it's not clear whether a) the sequence is SD and isn't showing the full HD clip, or b) the sequence is HD and the SD clip is small within the frame. Note that Arjun asked you specifically "what are your sequence settings," and you have not yet answered that key question.
Because you are working with content in two very different resolutions, if you want to edit the clips together in the same sequence, you'll first have to decide whether to work in an SD or HD sequence. Since you mention that you intend to burn a DVD, which by definition is standard definition (you have to use Blu-ray to burn a disc that is HD), I'll assume you want the sequence to be SD. Incidentally, in cases of mixed resolution like yours, that's what is generally advised because scaling the HD content down generally yields much better results than scaling the SD content up.
As Shooter has advised (twice), in order to get the sequence to match your source content, drag the clip that you want to match to the New button in the bottom right corner of the Project panel. If you scaled the SD content up, that would explain why the focus is not as good in the Program Monitor...
Now, when you drag your HD clip to the Timeline, it will be zoomed in (unless you have enabled the preference "Default Scale to Frame Size). You can correct that by right clicking the clip in the Timeline and selecting either "Scale to Frame Size" or "Set to Frame Size." Another detail you left out is whether your SD content is 4:3 or 16:9, which is controlled by the pixel aspect ratio. If it's 4:3, then Scale to Frame Size and Set to Frame Size will leave the HD content letterboxed, in which case you'll probably want to adjust the scale setting under Motion in the Effect Controls panel.
Based on the nature of your questions and the terminology you use, you have not yet taken the time to learn about Premiere Pro. You might want to do so before asking questions like whether it is "a good program to do top quality editing." Premiere Pro is used daily by thousands of professional editors. It's been used to edit some feature films released by major studio as well as many movies and documentaries that have graced the likes of the Sundance and Toronto Film Festivals and quite a few television programs. So if you're using it for the first time and having some problems, that's perfectly natural and understandable, and we're happy to help you up the learning curve. But the odds are pretty good that the problems are user error, not shortcomings in the program.
Here's a video tutorial that might help get you up to speed: How to create a video story with Premiere Pro | Adobe Premiere Pro CC tutorials

Similar Messages

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
Hope that helps

Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music??

I have Xfi Extreme Music (SB0640). In installed the lastes drivers for windows 7 (<a rel="nofollow" href="http://forums.creative.com/t5/forums/postpage/board-id/#]Creative Sound Blaster X-Fi series driver 2.8.003 [/url]), When I run a speaker test all 6 speakers work, however when I use media player, media center etc. Only the front left speaker works.
Do I need to install creative Alchemy?
Console Launchers does not load on boot
Any asistance will be appreciated
Thanks in advance

NRe: Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music? You will need to have the Creative Console Launcher which will let you have CMSS-3d or Creative Multichannel Surround Sound. You can find the newest version for your card here......
<a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=094"]http://support.creative.com/downloads/download.aspx?nDownloadId=094[/url]
Honestly though, dont bother with just that. Get Daniel K.'s X-FI support pack which is updated with the newest drivers and applications for your card. Plus, he tweaked those with fixes for installation/integration? under operating systems other than XP.
That can be found here.......
<a rel="nofollow" href="http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe"]http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe[/url]
And the link is still good.

Since the latest version of itunes, my playlists are "too large" to fit on the computer screen. I can no longer scroll down because the far right side of the screen is too far over. How can I minimize the screen or be able to scroll down my list? Thx!

Since the latest version of itunes, my playlists are too large to fit on the screen. The left side, with all my playlists is still there, but I can no longer scroll down the chosen playlist as the far right is no longer accessible. Any suggestions on how to minimize the list? Thanks.

I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

The music app on my Iphone 5 is acting up, it keeps skipping songs and wont allow the to play. You can see the music icon the on notification bar play and pause. When i go back to the app is states the url is not responding. I have restored it.

The music app on my Iphone 5 is acting up, it keeps skipping songs and wont allow the to play. You can see the music icon the on notification bar play and pause. When i go back to the app is states the url is not responding. I have restored it from the backed up cloud save. It is the music app, I played music on pandora and it worked fine. I think it must be the app or the ios.

restore with itunes not from an itunes backup or cloud save they do absolutely nothing only a clean restore will solve your problem

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

You may not apply more than the receipt amount

Hi All,
I am applying the invoice to a receipts.
senario is -->
i am having to debit lines of amount 60 and 70
and one credit memo of amount 80 for the same customer.
through api i need to apply the invoices to the receipt.
creating the receipt for amount of (60 + 70) - 80 is 50
when i am trying to apply the line of the invoices through api its giving an error as below
the same senario from the front end we add 60, 70, -80 that equals to 50 and receipt will be applied.
Customer transaction identifier has taken a precedence over the transaction number.
Customer transaction line identifier has taken precedence over the line number.
Cash receipt identifier has taken a precedence over the receipt number.
You may not apply more than the receipt amount.
Hope for early reply
regards
vali

We faced the same problem, where we contacted Oracle Metalink and go the fix.
Regards,
Sridhar

How to proportionally scale one side of a photo more than the other?

Does anyone have any suggestions as to how to scale one side of an image more than the other? I've tried Content-Aware scale but it always yields ugly results. Any help is greatly appreciated.
Peter

Hi Peter
I thik the main problem is the amount of the side of the column showing is making the right column appear larger.
I would therefore suggest moving part of the right side of the image slightly to the left.
You need to be careful in distorting the image as it will show up in the perspective on the floor.

MBP Caps Lock key sticks out more than the others!

Just wondered if this is normal! The caps lock seems to stick out of the keyboard more than the others! Can anyone help?

I just received my new MacBook Pro 17" this afternoon. My tab, caps lock, and shift keys are all raised on the left hand side. If you look at the keys from the left hand side of the keyboard you can see how they are raised up higher than the tilde and fn key. Also, the control keys kind of sticks when it is pressed down all the way. I like the machine, but I've very disappointed in the keyboard. It doesn't seem as nice as my PowerBook keyboard. I have them here side by side. The PowerBook keyboard is perfect and has a better feel when typing. I hope I get used to this new one.
-Karen

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

I need more than the maximum allowed 30 profiles - how do I change this?

I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Is there a way to enable & configure Volume Discounts via the Product Import Spreadsheet? Is there a way to enable more than 2 Quantity Thresholds?

Hi Michael,
You can set the thresholds via an import file. The easiest way to do this (and this goes for all importable data, webapps included, 301 redirects and so on) is this:
1. go into the Admin and create a single item, in you case create a test product and set the thresholds
2. export that data - in your case export the product list
3. take a look at how the data looks like in the export file so you can get an idea of how the format should be like in the import file
Unfortunately you cannot set more than 2 thresholds, that is not possible at the moment.
Thanks,
Mihai

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Confirmed quantity more than the ordered quantity in sales order.

Hi All,
We have a situation wherein the confirmed quantity is more than the ordered quantity.
a.) SO was created for qty1.Two schedule lines were proposed as stock was not available.
b.) When stock came in and most probablly, when the rescheduling job calling tcode V_V2 was run, both the schedule lines were confirmed.
c.) As a result, further processing is not done by system as confirmed quantity is more than ordered quantity.
Also we noticed that double schedule line was confirmed for a another order even without the rescheduling job is run.
Can you please suggest as to why this is scenario is occuring and how we can avoid the reoccurence? Thanks in advance!!
Regards,
Jeevan Penumatsa

Hi Jeevan Penumatsa
Welcome to SDN forum
Generally two schedule lines will take place if stock is not available in your plant or if open orders are there for that material also. So check the stock in MMBE
.If there are any backorders then it might be getting added in the created sales order and then you might be getting in two schedule lines
Regards
Srinath

Gross price of Service entry Sheet more than the value ordered in PO

Hi all!!
I have a PO that were created and changed by the following way:
The user created the PO of service with the quantity = 1 and the price = 50.000,00
Than he made the service entry sheet of this PO and MIRO normally.
As the fields on service tab wasn't blocked, the user changed the quantity to 105.000,00 and the price to 1.
After that, he made 3 services entry sheet to complete 105.000,00 quantities.
With this, the value delivered became bigger than the value ordered in the PO.
if I make a service entry sheet with a quantity of 200.000,00 for example, the message SE363 will be shown to me with a message that the "quantity entered exceeds quantity in purchase order".
I'd like to know if there's a way by customizing of control the price on Service entry sheet based on the value ordered in PO instead of quantity.
Can anybody help me?
Thanks in advance,
Cris

Hi Ajit and Rajesh
Thanks for the response.
The user made a PO with one line with quantity 1 and net price 50.000,00.
In the services tab, he put a sevice with quantitiy 1 and gross price 50.000,00, and than made the service sheet entry, and MIRO.
After this he changed in the services tab the quantity to 105.000,00 and the gross price to 1 (with the objective of making more than one service entry sheet by quantity).
With this, the system let the user make many entries of service allowing the user to make entries os sheet more than the net price that is in the line of PO.
I'd like to know if there's a way configure the system to make a compare between the gross price and the net price when i'm doing the service entry sheet, because now when I change a line of service tab, the system is not considering that other service entry sheet were made.
So that, i'm having the value of ordered bigger than the value delivered.
Nowadays, the block is made by quantity as I said, but i'd like to block by price too.
Sorry about the bad explanation before, I hope that now i explained better.
Thanks
Cris

The pitcure on the play screen front left is larger 50% more than the edit screen right side is zoomed in.

Similar Messages

Maybe you are looking for