The popup LOV is very slow in APEX 4.0, did anyone can help on this?
The popup LOV is very slow in APEX 4.0, did anyone can help on this?
Wherever I try to open a popup LOV windows , I am always be very patient to wait the window show . Even if only a very few record to show.
Edited by: daniel.luo on 2010/7/28 上午 7:52
Hi Daniel,
it probably doesn't matter how many records you show if you have an ORDER BY clause in your SQL statement. Because the database still has to do all the work to return you the first result set.
Is the query itself fast if you execute it in "SQL Workshop"?
Have you already tried the setting "Fetch" = "No Fetch"? Is the window now opening faster? I just want to rule out that it's a generic problem, but I think it has to do with your SQL statement.
Was the popup LOV for this SQL statement faster in 3.2?
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Similar Messages
-
i have iphone 5 and when i connect it to my Sony S series laptop it does,t show any conectivity and does,t charge the mobile. there is no topic in user mannual as well. anyone can help me please????
Make sure that it is connected to a USB 2.0 port and not a USB 1.1 as 1.1 will not provide power for connectivity.
Try it in a different USB port and see if it works -
hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer. On the top line right corner the symbol says: NOT AVAILLABLE, and the icon is not anymore int my computer's preference. Anyone can help me here?
I've done it two or three time and I still have the same problem. May be I do not do it properly so can you give me the right procedure.
-
I'm not sure if anyone had run into this issue. Clicking the same place on the display sevral times will cause the click to stop working. For example, if i open safari and click on the Show Reading List button, it will work the first time i click it, but stop responding to my command as i click more, as if the button is not there, i have to move away the cursor and click somewhere else and move back to click the button to make it work again. And it happened everywhere, not just the show reading list button. The scrolling and moving are normal.
In fact, I have my trackpad replaced in an apple store for this issue but it turned out this is not a hardware problem, and it is not only my problem. Ironically, i found the same issue on several of the demo Macs inside the apple store. So anyone can help me here? Thanks.Hi manni394, what version of Firefox are you running now?
Firefox 22 has a new way of setting the default zoom level: it is based on your Windows font size setting. So, if you set Windows fonts to 125% (enlarged 25%), your Firefox pages also will be enlarged 25%. On pages that do not adjust their layout, you may get a horizontal scroll bar.
To reduce the zoom on a page, hold Ctrl and tap the - key (the one on the numeric keypad or the one on the number row of the keyboard). The zoom should be reduced for each tap.
If you want to globally adjust your zoom level to be lower, you can use either of these add-ons:
* [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
* [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
If you already have one of those add-ons, check the default/global zoom level in case it needs to be adjusted. -
Excel 2010 is very slow at inserting automatic subtotals. How can I resolve this?
How can I resolve this?
In addition to Mr Oskar's Suggestion..
Basically inserting subtotal is adding rows for each group and inserting formula for SUM,COUNT etc.If your data has many rows obviously that will take more time.You may try once with PIVOT TABLE
Best Regards,
Asadulla Javed, Kolkata
Please do not forget to click “Vote as Helpful” if any post helps you and
"Mark as Answer”if it solves the issue. -
hi
im a newby to this but i really need help fixing my macbook air a1369 2010 model display screen, i have replaced all new but its just dead a black screen with no power getting to it at all even the backlit led is dead so the inverter isnt getting power to it either. everything works perfectly through another monitor hoocked into the thunderbolt port, its just theres no power going into the built in display.
i would really appreciate some pointers as to whether theres any fuses that i could change or any pointers on getting the display to work at all. thank you for taking the time to read this and hope you can help a newby get back up & running.Confused, if you just had screen replaced was it working when you picked it up? I'd call whoever fixed it and report it ASAP.
-
Is it possible to edit the Popup-LOV window?
Hi,
I changed my Selection-List into a Popup-LOV.
1.
Now I want to edit this Popup-Window, that it shows more than 10 rows. Is it possible to edit this window?
2.
My return-value is the Primary Key of the chosen dataset. This is not very user friendly. :-S ... is it possible to "display the display value" in the textbox from the popup-LOV - and when I want to save the whole form-dataset it takes the primay-key-return-value?
I hope, somebody understand my problem.
Thanks so much,
Elisabeth
Message was edited by:
user614754In APEX 2.0 this does not work for the actual code of the POPUP. I want to change the code in the POPUP window that appears so it resubmits the parent page when the item is selected after the passback but had to create a custom POPUP page as I could not edit the popup code with the passback code.
If there is a way of editting the POPUP page template (not the link from the POPUP LOV Item) then please can someone let us know?
Thanks
Phil
I've started a new thread on this as it is different and there does not seem to be a solution discussed so far
POPUP LOV template modification
Message was edited by:
Phil UK -
Hello,
in my Office we're working with Macs and PCs and all the data is on a NAS.
Here is our configuration:
NAS <-link1->Switch<-Link2->Macs or PC.
Macs are connected with AFP protocol (because SMB is very slow).
We want to use Link Aggregation between the NAS and the switch (with 802.3ad procotol) but when we do that all the Macs have a very slow access to the NAS. But all is OK with the PCs.
What can we do? Is there a problem with macOS X and link aggregation?
Thank you for your help.
NicolasSorry, not sure what the question is exactly.
You must have an Xserve, or Ethernet cards capable of Jumbo Frames for one, I assume the Switch & NAS are capable?
Possible clues...
http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c3ha3.html
http://discussions.apple.com/thread.jspa?threadID=1715388&tstart=0
http://www.macnn.com/articles/04/06/21/link.aggregation.for.macs/
http://www.smallnetbuilder.com/content/view/30556/53/
http://www.afp548.com/forum/viewtopic.php?showtopic=8309 -
Most of the crap ios 7 very slow I want to go back to ios 6.
Most of the crap ios 7 very slow I want to go back to ios 6.
Something may have gone amiss in the upgrade to iOS 7 on your iPhone.
To correct this follow these steps:
1. Backup your iPhone using iTunes or iCloud.
2. Use iTunes to completely restore your iPhone as new.
3. Monitor performance to see if it is normal. If not, you may have a hardware problem - if so, contact Apple support.
4. Restore your iPhone from your backup above.
5. Check performance to confirm that it remains normal. -
The cursor movement is very 'slow' or 'inertial'
Hi.
I bought a mac mini with a magic mouse and connected it to a large LCD TV via HDMI (fullHD). Everything is excellent, save for the fact that the cursor movement is very 'slow' or 'inertial'.Hi,
Whenever you write code, format it to show the scope of BEGIN, LOOP, IF statements, and so on.
Type these 6 characters
{code}
(small letters only, inside curly brackets) before and after the formatted code, to preserve spacing on this site.
You've discovered why the tecnique you're using is called "slow-by-slow" processing.
You don't need a cursor. You may not even need PL/SQL.
Just write an INSERT statement that reference the table from the cursor and the tables from your current INSERT statement.
Here's one way:
INSERT
INTO t1 (columns)
SELECT columns
FROM t2
, t3
WHERE ...
AND (t2.month, t3.sp_name) IN (
SELECT DISTINCT
acct_month
, salesperson_name
FROM period
);Depending on the details of your case, there may be a better way, such as a 3-way join. -
hello am using mac book pro ,recently i updated my computer to OS X MAVERICKS ,where my launch pad in my dock is slow,when i move the track pad to next page in launch pad ,it is very slow ,it takes two to three swipes ,please help me
Hey rajafromind!
I have an article here that can help you troubleshoot this issue:
OS X Mavericks: If graphics-intensive tasks slow down your Mac
http://support.apple.com/kb/PH13952
The following article may also have some helpful information for you:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???
Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
Russ -
i have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??
dovdov2,
are you saying that when you connect your MacBook Pro to a monitor, your Internet connection slows down, but when you disconnect the monitor, it speeds up again, and that this is reproducible from one day to another?
Does this happen both under OS X and under Windows 7, or only under one of them?
How are you currently connecting your MacBook Pro to your monitor? -
Backup to the remote stages is very slow
Hello!
I am facing with the following problem for DB Backup to the remote stage.
If I plan the ALL ONLINE-Backup, then the backup is takes very slow, backups two or more files and aborts.
I have checked the appropriate BTC WP and saw that the WP is holding/waitng.
The reason is RFC.
How can the problem be solved?
Thank you very much!
regards
ThomWithout logs of the backups we can just guess, what is wrong.
Post the log of a failed remote backup here and let´s see then.
Markus
Maybe you are looking for
-
Query linking Check Register with AP invoice
Hi, was someone be able to create a query where it shows the Check No, Check Date, Vendor Name and alos the AP invoice being paid with the Expense Account being hit on the AP incoice. Thanks
-
Upgrade oracle 9.2.0.8.0 to 10.2.03. while runing catupgrd.sql script. i am geting error. SELECT version_script AS file_name FROM DUAL ERROR at line 1: ORA-20000: Upgrade not supported from version ORA-06512: at "SYS.VERSION_SCRIPT", line 52 Please h
-
on one of my playlists I am not able to move songs around, I checked all the other lists and it works but one.
-
Any Setting/Permission for GRPO to Restrict Update
Dear all Is there any setting for Restrict permission for update GRN before add,for example user want add GRN only based on Purchase order (Quantity,price,tax,item...)he should edit the GRN,he can only ADD
-
Editing Watermarks in Lightroom 4
I have been using this application for some time and have a long list of watermarks. How do I :- 1. Edit a matermark without creating a new one? When I try to save an edited watermark it asks for a new name and creates a new one adding it to the l