The program signals an error and closes the program.
When I try to use the program with an .epub file, it signals an error and closes the program. Have reinstalled, but the same thing happens.
What to do?
itunes encounters an error and shuts down.
That would be an unusual error message to be getting if you were having a problem with a photo cache ... but just in case ...
Try deleting your iTunes photo cache, as per the following document:
Photo Sync creates iPod photo Cache
... can you get a photo sync to go through without the crash after that?
Similar Messages
-
Windoes reports a NIMax error and closes the application when i try to open MAX
Windoes reports a NIMax error and closes the application when i try to open MAX. It was fine just a couple of months before and i do not know why. I need to access the VIlogger for using my USB-6009 module.
I wouldn't think this was a firewall problem - they tend to be better behaved than this. Before installing the new drivers, uninstall all the driver software, restart your computer and then attempt the install. If this doesn't work, uninstall all NI software - including LV - run a register cleaner like CCleaner, restart and reinstall everything. It THIS doesn't work, it's time to be talking to NI directly.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?
You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS. I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before. I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure. Was the computer ever in a smoky environment??
-
Xp pc will not let me open the itunes store it faults and closes the store or tutorials
Dell XP will not let me reach the store or act on any tutorials. It faults and closes the shortcut to Itunes. I have the most current Qtime and just downloaded the store program.. According to the apple test for the store everything is up and running but it will not connect.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 8300
iTunes 10.7.0.21
QuickTime 7.6
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012A81406E14F10
Current user is an administrator.
The current local date and time is 2012-09-22 10:32:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 6200
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D8D4748F-C04C-4432-8FCC-D1A6BE80F0B3}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Sep 22 09:54:35 2012
Lease Expires: Sun Sep 23 09:54:35 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
iTunes has never successfully accessed the iTunes Store.Add me to the list. I just bought mine & can't log onto the Apple Store to rent/purchase. I can on my MBP.
I've had the same thing happen when I tried to enter my YouTube username & password. It wouldn't accept it. I thought it was a fluke w/YouTube. Apparently not so.
So, I can't buy or rent movies/TV shows. Exactly why do I want this gadget?
How about an update on the Apple site that just recognizes these problems & promise a fix?
Message was edited by: Randy Green -
Why Can't I log in to the I-Tunes store it has always worked in the past? It gives me an error then closes I-Tunes
ThanksHello gidgetfarms,
Thank you for using Apple Support Communities.
For more information, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Have a nice day,
Mario -
Applescript to open the Choose Folder dialog box and close the message after moving it
I've been trying to figure out how to get the same functionality as the Windows version of Outlook has so that the open message gets closed when it's moved to another folder.
It seems pretty simple to move a message to a pre-defined folder, but I can't find a way to open the Choose Folder dialog so I could choose the destination folder. I've looked through the dictionary, but couldn't find any direct way to activate the Choose Folder dialog. So I decided to use keystrokes for the job. Here's what I came up with:
on run {}
tell application "Microsoft Outlook"
try
set theMessage to first item of (get current messages)
set folderID to the folder of theMessage
on error errMsg number errNum
set dialogReply to display dialog "Please select one or more messages to file away before running this script." buttons {"Abort"} default button 1
return
end try
-- open the Choose Folder dialog
tell application "System Events" to keystroke "m" using {command down, shift down}
repeat
delay 2
set currentID to the folder of theMessage
if currentID is not folderID then exit repeat
end repeat
-- Close the active message
tell application "System Events" to keystroke "w" using command down
end tell
end run
This is my first attempt to do anything with AppleScript..
Now in addition to using keystrokes instead of Outlook built-in commands to open the Choose Folder dialog and to close the message, I also have another problem. Everytime I run the script from AppleScript Editor, everything runs fine, the message gets moved to the folder I choose and the message also gets closed. When I move the script to "~/Library/Application Support/Microsoft/Office/Outlook Script Menu Items" and start it from inside Outlook, Outlook gets stuck after opening the Choose Folder dialog and I have to force quit Outlook. I added some debuggin to the script and found out that the script keeps running, but I'm unable to select the folder from Outlook and cannot continue.
Anybody have an idea why this is happening?
Regard,
Kris(For the record)
Unchecking "Submit crash reports" in the Firefox [[Options window - Advanced panel]] General tab simply toggles the default of the "Tell Mozilla about this crash so they can fix it" check box in the Mozilla Crash Reporter dialog (upon crash). It does not turn off the Crash Reporter itself.
Related bug report:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=577221 Bug 577221 - Firefox doesn't remember "submit crash report" check box]
The above information has been added to
http://kb.mozillazine.org/Breakpad#Can_I_disable_Crash_Reporter.3F -
Those are all the details I have
There is an article about this problem see:
* [[Firefox is already running but is not responding]] -
What is the better way to open and close connection in bean
Hello, may i ask about the best way to open and close the connection?
At the first, the connection code is store in Conn class bean. The JSP page will call a method in Process bean to process the query and update of database. the Process bean is using th Conn to connect to database.
In my process bean, it have a method for each type of sql like select, insert, update, and delete for each tables. Each method will call the Conn to open and close the connection. The jsp page can simply call a method retrieve or update records.
However, when calling the processUpdate method, it is a method that update a group of tables base on the query result of another group of tables and calculation. If I calling the query method in the same bean file, it will open and close the connection many times (more than 1000 times). After open and close the connection several times, the connection to mySQL will be fail.
Currently, i include 2 method in Process that is only calling the Conn to open the connection and close connection. When calling the openConnection method, it will also set the boolean connected in the class to true and call Conn to open connection. When calling the closeConnection method, it will also set the boolean connected in the class to false and call Conn to close connection.
After that, i add some change to the query method which is when the connected is false, it will open the connection by calling the Conn and close the connection themself. If the connected is true, it will not call the Conn to open and close the connection because it already connected to the database.
Now, i when i calling the query method in jsp, it can open the connection and close the connection individually. When i call the processUpdate in the jsp, this method will calling the openConnection before calling the query and calling closeConnection at the end. It not only faster the process(less open and close), it also no cause the connect to mySQL fail error again. However, it also make the coding in the bean file more longer and complex.
Is there have any better solution?Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932 -
TestStand hangs and closes the sequence editor whenever I try to access Help.
I'm having trouble whenever I try to access TestStand Help... in the help menu, the "contents" and "search" tabs work fine, but the "index" tab is the one that is giving an error... when clicked, it gives the following error and closes the application.
"AppName: seqedit.exe AppVer: 3.5.0.725 ModName: itircl.dll
ModVer: 5.2.3790.80 Offset: 0000800a"
Can anyone identify the cause for the problem?Hi Sud:
The problem you are seeing seems more of a windows error and not a TestStand one. Please see the following instructions that might help you:
To resolve this problem follow the commands listed below to register the file itircl.dll:
• Open up a DOS Window by going to Start --> Run.
• Type cmd in the text window.
• Type: cd c:\winnt\system32
• Register itircl.dll by typing: regsvr32 itircl.dll
Thank you
Nandini
NI -
I've created PDF Form (Acrobat XI standard) with various field and button for sending the link of document location by outlook mail. I need the adobe java script for save the document in same location and close the document while i use the button for sending the link.
You can only save the file to a specific location if you can install a script on the local machine where the file is used.
Otherwise the best you can do is cause the Save As dialog to open, but you can't force the file to be saved. -
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Every time I try to use Photo Mail in PSE 11 the program shows error and close
How to use Photo Mail in PSE 11 as it close every time I try to access
Problem have been solvedThanks for your crystal clear instructionsI do appreciate your help and care so muchGod bless you all
Date: Wed, 3 Apr 2013 09:58:39 -0700
From: [email protected]
To: [email protected]
Subject: every time I try to use Photo Mail in PSE 11 the program shows error and close
Re: every time I try to use Photo Mail in PSE 11 the program shows error and close
created by Andromeda14 in Photoshop Elements - View the full discussion
Please follow steps as mentioned on blog: http://tinyurl.com/cy9beny ~Andromeda
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5203304#5203304
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5203304#5203304
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5203304#5203304. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Dear Team,
Please solve this problem.
Open the outlook then show below error.
1. Check online for a solution and close the problem
2. Close the program
Please do the needful as well as possible.
Thanks & Regards.
Devesh Yadav
9999815203Hello,
So Outlook has failed to launch and an error dialog (error reporting) pops up. A lot of things can cause this issues.
One of the main causes is a corrupt Navigation Pane settings file. You might need to start Outlook using the /resetnavpane
switch. Just run command (Windows key + R), type or paste:
outlook.exe /resetnavpane (Please note that you will lose any customizations on the navigation pane)
In certain cases, a corrupted data file will also cause this problem. So, if the /resetnavpane switch doesn't really work, please try to repair your data file with
scanpst.exe tool:
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
If these cannot fix your issue, please be more specific on the error. Please click the button at the bottom of the error pop ups and copy the
Problem signature here.
Thanks,
Ethan Hua CHN
TechNet Community Support -
I am unable to use Icloud on my Dell PC. I have uninstalled it twice and reloaded it. When I enter my Apple password, it tells me that it has stopped working and closes the program. What can I do to correct this.
Hi MamaTabs,
If you are having issues signing in to iCloud on your Windows machine, you may find some of the troubleshooting in the following article helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Also, you may want to make sure that you are running the most recent version of iCloud Control Panel for Windows:
Apple: iCloud Control Panel 3.1 for Windows
http://support.apple.com/kb/dl1455
Regards,
- Brenden
Maybe you are looking for
-
How long does it take to get my iBooks Store Application accepted?
I have just created my first book with iBooks Author and on Friday went through the process of getting it published to iBooks. I had to fill out an application that I believe went to Apple. It has been three days now. Do I have to wait 7 days like th
-
Deleted item and message in purchase order
Hi ! When I delete a item in a purchase order (ME22N), this deleted item doesn't appear in the message (category message = NEU). How make to appear the deleted item ? thanks a lot Joel
-
New photos are not showing up in my Photo Stream Folder on my PC. Why?
New photos are not showing up in my Photo Stream Folder on my PC. Why?
-
Mail with PDF attachments sent, not stored in Sent
IMAP account, Sent folder configured to point to server's sent mail folder. "Windows friendly attachments" selected. If I send a message with multiple PDF attachments, the message will be received, but it won't be written to the Sent folder. I can't
-
Hi. I need to add rows of data in flash and have them total up on the last row as the items are checked. Looking at the following example, if someone checks a tickbox next to items 01 and 02, the total sum would appear on the last row for each column