The sales volume for Rebate agreement is not current
Hi All
I am getting an Error in Rebate VBO2- Sales volume is not current
I am working in ECC6.0 & my agreement type customer rebate.
Have maintained records in VBO1 & in billing -condition tab the correct % get populated. But the same is not displaying in VBO2.
As per sap note in OMO1 i have updated S136 to synchronous updating 1. Also i execute program SDBONT06. In VBOX also i tried to update various parameters.
Customer statics maintained-1
G/L's maintained correctly.
But still i am facing the same error in VBO2, 'sales volume for Rebate is not current'.
Please anybody can help me on this.
Hi deepa
Run VBOX and check the box update billing documents and give the sales area and then execute and save it and if possible try to give the billing documents if you have any idea or else just generate.After generation again open the rebate agreement VBO2. so that the data gets updated by that time
Go to OMO1 and check wheather the infostructure S060 is in Asynchronous updating 1 or Asynchronous updating 2 or No updation. If it is No updation then update the infostructure
Regards
Srinath
Similar Messages
-
Significance of Sales Volume in Rebate Agreement.
Hi All,
Could you please tell me what is the significance of the Sales Volume in Rebate Agreement and how can it be used while settlement.
Thanks.Got it.
-
Enhancement to update sale volume for rebates
Dear All,
We have a senerio for sale voume rebate process that only above 50000 sale value will add up in sale volume in rebate agreement for accrual process.
Can we do this through standerd or through enhancement?
please help.
Regards'
KumarHi Mukul,
Mark your condition type VALUE SCALE and Check Value as A.
Update condition record in Rebate agreement. Then in Scale section mark it applicable as FROM 50,000 INR with respective Rate.
And it will work as per your requirement.
When you will do Settlement of the Rebate Agreement it will create Credit Memo only if Value is more than 50000 INR.
Regards,
MJ. -
Sales volum for extended rebate agreement
HI All,
i made an extended rebate agreement and asales order accordein to this agreement, dleivery and billing then i returned back to the agreement to make settlement but i found this massage (( The sales volume for agreement 131 is not current)) i runed the report SDBONT06 but the massage still present so can u help me pls.Hello
Refer following links with SAP Note for reference/understanding:
- The sales volume for Rebate agreement is not current
- Sales volume not current in Rebates
- 456458 - FAQ: How does SDBONT06 work
Thanks & Regards
JP -
Final Settlement for Extended Rebate - agreement status not updated
Hi,
When doing final settlement via the Extended rebate, a CM is generated, but the status of the agreement is not updated to D. Any configurations needed or steps to be done? I thought it should be automatically updated by the system..
Thanks,Hello
Refer following links with SAP Note for reference/understanding:
- The sales volume for Rebate agreement is not current
- Sales volume not current in Rebates
- 456458 - FAQ: How does SDBONT06 work
Thanks & Regards
JP -
What is the DataSource for 'Rebate Agreement' (Data comes KONA,KONP&KONH) ?
Hi all,
What is the DataSource name for 'Rebate Agreement', please?
This data comes KONA, KONP & KONH tables.
Thanks,
Venkat.Hello Venkat,
you can extract it from 2LIS_13_VDKON Extraction of SD Billing Conditions
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/cd5e407aa4c44ce10000000a1550b0/frameset.htm
Sarhan. -
How to read value of the period for which the sales volume has been entered
Hi Experts,
In the transaction "/ncrm_ipm_d_usage_data", we have a scenario where a user can enter value in the "sales volume reported" column for more than one period. Now we need to read the period_from (date from) for the first "sales volume reported" value entered.
For example: If a user enters values in "sales volume reported" column for the period_from 02/01/2009, 05/01/2009 & 08/01/2009. We need to read the first period_from value for which sales volume value is entered. Which means it should be 02/01/2009.
Our issue is that we are unable to find the standard method or variable which holds this value. We found these classes through debugging but it does not help us.
1. Class CL_CRM_IPM_USAGE_DATA
Methods we found:
1. FIND_CONTRACT
2. MAINTAIN_DATA
3. MAP_UI_DATA
4. FILL_CUMULATED_I
5. GET_USAGE_DATA_KEY
Please help us to find the standard method or variable which reads the period_from for the first sales volume entered.Hi Student5088,
I used a Copy-Block to create a delay for a certain number of values (time) of a signal. With that you can continuously compare signal at T1 with Signal at T1*0.5.
Greetings
Walter
Attachments:
Compare.DAC 28 KB -
Not reflecting the sales offices for top down manual planning hierarchy
Hi Experts,
Please help me on this issue.
I hava an Hierarchy like from District to Offices
for eg: for district- 'ZBHDEL' I have salesoffice like 100, 101, 102, 103,105.
like wise for other district 'zbhyd' i have salesoffices like 200, 201, 202.
I have created the Mannual layout with Hierachy datamodel with BPS characteristics, TOP-DOWN, AND enabled check entry.
In the additional setting i have select All Possible combinations.
District at Headerlevl, along with Product and Division
and selected salesoffice at Leadcoloumn.
My Planning levell and package contains : for sales office slected Hierarchy at planning level.
BRAND
Base Unit
Company code
Country
Currency
Division
Fiscal year/period
Fiscal Year Variant
PRODUCT
SIZE
Sales District
Sales Office
Segment
Version
*The Prolem is when i input some plan for a district ZBHDEL from the other layout, WHEN I RUN THE sALES OFFICE hIERARCHY
Mannual Layout its not reflecting the sales office where i have to plan for the salesoffices by seeing the values
of planned District.
where as for one district i can able to see the sales offices. even i have maintained the masterdata at Infoobject level.
Can anybody please help me out.
thanks
Deenu
Edited by: deenu prasad on Aug 4, 2010 7:07 AMCreate hierarchy for sales district info-object in following way.
Sales District Text Node Level 1
Sales Distirct Characteristics Node Level 2
value 1 = ZBHDEL
value 2 = ZBHYD
sales Office Characteristics Node Level 3
values will be according to district (include diff sales offices for diff districts in level 2)
restrict district to this hierarchy in planning level and plan according by both approaches (create 2 seperate layouts):
Top down - to plan at main node i.e. sales district
bottom up - to plan at sub node i.e. sales office -
How to create scales for conditions for rebate agreements?
Does anybody know any function modules or bapis to create scales for rebate agreement conditions.I want to create entries in konm table where scales for conditions get stored.Also pls tell me how to link contributory volume by programaticaly?
Thanks in advancePart of my question is answered .I could find parameter in BAPI_PRICES_CONDITIONS to create scales for conditions.But do anyone have any idea how to link contributory volume to conditions? i have conditions and also contributory volume? can anybosy send me some material which explains the contributory volume..atleast functionally?
-
External number range for rebate agreement
hi experts !!!
can we give
external number range for rebate agreement
e.g . ab0039
this number i want give for one of rebate agerrment
please guide
and is it possible the customer no and rebate agreement no are same
ponts will be rewardthanks friend
i already did this by creating external number range AAA -
ZZZZZZZ
and system allow me to give no like AB0056
and if now i create new record by VBO1
IF i give external no system accept
AND if i don't give system generate his own no
can u tell me exactly where i have to assign this number
but there is no number object LIKE in t.code VNO1 there is no 01 or 18 so that i can mention in sales document type
like......
so how and where i have to assign
points will reward -
Reversing of accruals for Rebate agreement with status D
Issue :
Rebates were wrongly accrued because business had cancelled final settlement for rebate agreement ,and then created new rebate agreement for final settlement.
Details:
Three rebates agreements were created for the same customer .
Two of them were wrongly created and final settelment was done by business .
So business cancelled final settellemnt for these 2 rebate agreement.Hence status of these rebate agreement is D.
(Note -credit memo was not issued for these 2 rebate to the customer)
Third new rebate agreement was finally created and after final settelment credit memo was issued to customer.
Now since for first 2 rebate agreement final settelment was done and then cancelled,accruals are still sitting in G/L account.
Please suggest how to reverse these accruals, so that G/L accounts can be cleared.Hi Saurabh
Why dont u reverse the entry direcely in FI by passing an entry with document type SX to reverse the accrual.
Thanks
Indranil -
I have a new Samsung phone and I live in CT. Last month they charged me $38 on my bill for the sales tax for the new phone which was $600. I'm paying for the phone itself over 20 installments of $30 each. Now again I'm getting that same $38 charge. I can't believe that the monthly CT tax is higher than the payment for the phone itself. Does this make sense. Last time I spoke with them on the phone it was for 1 1/4 hours for something simple. I don't want to call unless I need to. The salesman told me nothing about any of this. Thank you for any help you can offer.
The bill from last month states:
CT state sales tax** $38.10
** In some states sales tax or surcharges are calculated on the full cost of the full retail price or VZW cost of the device you purchased and not on the discounted price you pay. The sales tax or surcharges charged on your device was based on $599.99 and appears on this first bill.
The current bill says the same.
Actually, now I'm realizing that last month's bill stated I was making the first payment toward the phone. Now this month also says it's the first payment toward the phone when it's really the second. -
The condition record for use B can not be displayed
Hi gururs,
What does this message (number : VE896 ) mean ?
How to make it desapear ?
P.S : it's about output type for purchase orders.
This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
Regards,
Bahia.Hi
It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
Thanks -
The factory profile for this display could not be found
Just received a new (mid-2012) macbook air (13"). Started it up from time machine from my old macbook pro.
The new screen seemed a bit blue so I thought I'd calibrate the display. But I don't seem to be able to. I don't get the Display Calibrator Assistant. I just get 'The factory profile for this display could not be found'. Please help if you can?Thanks for the feedback.
With Pacifist, a search should show everything in a separate search results window. That feature might only be available in the paid mode. If you're reinstalling once a month, you might reconsider how you're using the machine. If you made frequent bootable backups/clones to an ext FireWire HD and also did a Time Machine backup to another disk/volume/partition, you'd probably minimize doing that. I haven't done an A&I installation but once the past six years. That doesn't include purposeful ones done while beta-testing Panther, Tiger, and Leopard.
See these for other tips on keeping your installation flawless:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Myths of required versus not required maintenance for Mac OS X,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up
Essential Mac Maintenance: Rev up your routines,
Speeding up, and
Maintaining OS X for information. -
Cannot adjust the sound volume for my iphone notification
Hey there,
I just got my new iPhone 4 but it works weired that I cannot adjust the notification volume for any messages and alert. unless mute.
pressed '-' only adjust the volume for incoming calls.
anybody has any idea? Thanks,Same issue here, just want the SMS alert tone lowerd. Seems like everytime this is asked on the web there's 15 people asking and not a single answer.
Maybe you are looking for
-
FIOS Remote app and available space on DVR
On the newest version of the iphone FIO Remote DVR app I am no longer able to find the amount of space I have used/have available on the DVR. Can this still be found on the new version? If this feature has in fact been removed I will take your reco
-
CORE4008, CORE4011 and CORE3187 errors
Hi Guys, any idea what could be the problem. I have tried reinstalling and still get the same errors. Sun ONE Web Server 6.1SP8 B06/13/2007 23:15 failure: CORE4008: Internal error: unable to locate: com/iplanet/ias/util/JException failure: CORE4011:
-
I just got my Mac and I used my family Apple ID. It had all of my parent's information, I added my e-mail.I wanted to make my own Apple ID, but I couldn't use the same e-mail address again! How do I delete this information so I can make my own Apple
-
Hey guys, I'm not sure if this fits here, but we'll see. I asked a friend if he would send me this picture so that I could use it as a background for my desktop (I'm really sick of looking at blue swirls), and he did so via e-mail. (We both have Macs
-
Raising exceptions on hanging or failing updates
I have inherited a storeprocedure of around 400 lines of code wgich contains multiple SQL blocks of a update selection wrapped round a select statement. This store procedure works on dbA but not on dbB on dbA. it just hangs. dbA has more data, so it