The sandbox of Unified Contact Center Enterprise always shows the error "Finesse is out of service."

Hi guys,
I reserved the sandbox of Unified Contact Center Enterprise. But when I open the desktop application from the url "http://10.10.20.60/desktop/container". It always shows the error "Finesse is out of service.".
Does anyone meet the issue?
William

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Ask the Expert: Cisco Unified Contact Center Express (UCCX) Version 10.0 - Upgrade, Migration, and New Features Overview

With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati

Error 4013. my iphone 4s with ios 7 suddenly colllapsed. It appears the apple and turns on and off, always showing the apple.

error 4013.
my iphone 4s with ios 7 suddenly colllapsed. It appears the apple and turns on and off, always showing the apple.
I try to connect it to itunes but when it tries to install the software again it appears error 4013. i tried changing the usb port anda the connecting cable buit it doesnt work. what shall i do??

Did you already check these suggestions?
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
copied from Resolve specific iTunes update and restore errors

The Address Book Contacts doesn't always show the Titles.

Among the contacts I have, some entries do not show the title in the name field of the address book. I tested on one of them that used to show the title by removing the tiltle and saved it and then putting it back in again and saved it. From
then onwards the title no longer shows up.

Hi,
Which version of Outlook are you using? Would you please provide a screenshot regarding this issue so that we can understand it more clearly? If your account is not verified to attach an image, you can share the screenshot to us via sending it to
GBSD TN Office Information Collection [email protected]
(The email subject should be the thread link)
Thanks,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Cisco Unified ICM/Contact Center Enterprise & Hosted Installation popup

Hi,
How to disable Cisco Unified ICM/Contact Center Enterprise & Hosted Installation popup on CISCO ICM 9.x setup.
Process Name: ICMCCNextStep.exe*32
Thanks ,
S.Ram

Hi Gergely,
After deleting from startup it is not displaying. Please find attached snapshoot for the same.

Ask the Expert: Deployment and Troubleshooting Cisco Unified Contact Center Express (UCCX) Deployments

With Anirudh Ramachandran and Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the latest advancements in Cisco UCCX (such as the integration of Cisco Social Miner to provide agent chat and better reporting using the Cisco Unified Intelligence Center), as well as the existing features of Historical Reporting, custom reporting using the historical database, Agent Email services, JTAPI integration with CUCM, and the HA over WAN cluster mechanism.
Anirudh Ramachandran is a customer support engineer at the Cisco Backbone Technical Assistance Center in Bangalore, India. Working in the Asia-Pacific time zone for the last two years, he focuses on Cisco Unified Contact Center Express issues and specializes in Linux, JTAPI/CTI integration, and UCCX system and database issues. He holds the CCNP Voice and UCCX Specialist certifications, and is also a Red Hat Certified Engineer. Anirudh writes tools and automates bug workarounds for UCCX in addition to working on TAC service requests, and currently has authored and co-authored seven such tools. Anirudh graduated from the National Institute of Technology Karnataka with a Bachelor of Technology in Computer Engineering.
Abhiram Kramadhati is an engineer with the Contact Center Backbone team in the Asia Pacific timezone. He has been working with UCCX since he started with Cisco 2 years ago. During his time at Cisco, he has built his expertise around UCCX Telephony applications, JTAPI integration, UCCX system behaviour, LDAP components and also UCCX as IPIVR in UCCE environments. He also works on other technologies including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the region. Abhiram is a Telecommunications engineer from Bangalore, India.
Remember to use the rating system to let Anirudh and Abhiram know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video Contact Center subcommunity discussion forum shortly after the event. This event lasts through May 3, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Anthony,
Thanks for the question.
This is an interesting requirement, since the UCCX trigger's configuration is translated only to the Call Forward Busy External setting on the CUCM.
Trigger creation:
144768: Apr 22 21:54:23.789 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet.updateNewTrigger() - Creating a new Trigger :1234
144876: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet routePoint = 1234
144877: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet description = testt
144878: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet deviceName = testt
144879: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePool = {1B1B9EB6-7803-11D3-BDF0-00108302EAD1}
144880: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePoolName = Default
144881: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpace =
144882: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpaceName = None
144883: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet redirectCSS = default
144884: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet location = {29C5C1C4-8871-4D1E-8394-0B9181E8C54D}
144885: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet locationName = Hub_None
144886: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partition =
144887: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partitionName = None
144888: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfile =
144889: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfileName = None
144890: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyVM =
144891: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyDestination =
144892: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSS =
144893: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSSName = None
144953: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: try makeRequest() on AXL: 10.106.113.142, AXLUser: axl, AXLPassword: XXXXXX
144954: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:CCMVersionSOAPAdmin.getAXLVersion():7.1
144955: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - Start REQUEST ====================
144956: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 440
http://schemas.xmlsoap.org/soap/envelope/">MADM_5691234CRS Line descriptionCallPark
144957: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - End REQUEST ==================
144958: Apr 22 21:54:23.914 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: getSocket: MADM_LIB_AXL_AXL_SOCKET_POOL-0-79[TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=10.106.113.142,port=8443,localport=44913]]
144987: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - Start REQUEST ====================
144988: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 839
http://schemas.xmlsoap.org/soap/envelope/">MADM_570testttesttCTI Route PointCTI Route PointCTI Route PointSCCPUserRing1000010000
144989: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - End REQUEST ==================
145014: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - CTI RP created.
145015: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - Created a Route Point = 1234
As you would aready know, the UCCX will send an AXL request (within the SOAP envelope) to the CUCM to create this RP. Looking at the existing code, there does not seem to be a method where we are differentiating between CFB_internal and CFB_external while sending this request.
We have taken this as an enhancement request and also spoken to the business unit about the same. It has been added to the roadmap, we will reach out to you offline to understand the business case so that the process can be expedited if needed.
Keep the questions coming
Cheers,
Abhiram Kramadhati

What is the best way to set up direct to agent calling in Contact Center Enterprise?

I have a need to route to agents from a menu choice or extension. We use an extension and a seperate agent login for our associates. I need to keep the call visible to Contact Center for reporting but it must route to the users Voicemail extension if the Agent is not available. There could be up to 20 of these in a sales unit that have to be setup. I am doing the first now and want to set it up the best way from the start. any suggestions?

There are a few ways to go about this.
Say, for example, that your agents have the following on their phone:
ACD line (no voicemail), same as Agent Peripheral ID
Personal line (with voicemail)
In my environment, we have a *XXXXXX pattern set up in CUCM which will go directly to the voicemail box of extension XXXXXX.
In my extension entry script, I use a Queue to Agent node with indirect agent reference. The caller inputs the Agent's ACD number, and if the Agent is available it delivers directly to them. You could of course continue queuing with messaging at this point, but in my case I follow up the Queue node with a Label that concatenates * to the number the caller entered. In Unity, I have configured the personal voicemail boxes with Alternate Extensions equal to the ACD line numbers.
Here's an example flow:
Caller enters ACD 801234 at prompt
Queue to Agent node queues to 801234
Agent not available, so Label node returns *801234
*801234 gets sent to CUCM (in my case through CVP). CUCM sends 801234 to Unity
Unity matches 801234 on Alternate Extension of 805678 personal line
Caller hears voicemail prompts for 805678
The important part of this design in my opinion is the direct-to-voicemail pattern (*XXXXXX in my example). You wouldn't want to overflow calls to a non-ACD number that actually rings the Agent's phone, as there is then the potential for calls with poor reporting. Getting to the right voicemail box can be done with Alternate Extensions as above, or you could keep a database table of AgentID-Extension matches and use the DB Lookup node in ICM.
-Jameson

Contact Center Enterprise (UCCE) and Vmware

Hi everybody,
according to the document "Virtualization Guide for Cisco Unified ICM/Contact Center Enterprise & Hosted (February 2010)"
only PGs and client AWs are availble on ESX.
To take advantage of UCS and virtualization we need to virtualize all the UCCE components (router, logger, and aws first ! ).
Do you know when UCCE components will be compatible with vmware for production?
thanks
Romain

As of August Cisco has updated the list of supported virtualized UCCE components for 8.0(2).
Here is a link:
http://docwiki.cisco.com/wiki/Unified_Contact_Center_Enterprise
Best regards,
Troy

Installing contact center enterprise 6.0 in new server and upgrading to 7.0

Hi,
I am trying to install contact center enterprise 6.0 into a new server ( earlier both call manage 4.3 and enterprise 6.0 were in the same BOX). So now i am upgrading cucm4.3 to 7.0 and installing enterprise 6.0 onto a new server taking backup from the old server and restoring in the new server. and after that i am planning to upgrade the Enterprise version to 7.0. Is this the right way or there is any other way.

Take a look at the 7.0 Upgrade Guide for your options. You'll be looking for Tech Refresh.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/installation/guide/Upgrade_Guide.pdf
Is there any reason why you are not upgrading to UCCE 7.5 which is compatible with UCM 7.0?

CISCO UNIFIED CONTACT CENTER EXPRESS - SMS INTEGRATION

Is is possible to integrate Cisco Unified Solutions (Cisco Unified Contact Center Express) with a SMS system? Do you have any recommendation of solution (ej. Quescom)?

We do this all the time using XLM and SOAP...what exactly did you have in mind?
Peace,
Michael Clendening
CCIE 6487 (ISP-Dial)

Unified Contact Center Express installation error

HELLO
while installing the Unified Contact Center Express 9 on vmware ESXI5.1 i am getting the attached error
the VM config
2 cpu
4 gb ram
160 gb hdd
os rhcl5 32bit
Please help

http://software.cisco.com/download/release.html?mdfid=284666782&softwareid=283733053&release=2.3&relind=AVAILABLE&rellifecycle=&reltype=latest
Chris

CISCO UNIFIED CONTACT CENTER EXPRESS - ORACLE WEB SERVICES

We need to access to an Oracle database information through Web Services, in a system witch Cisco Unified Contact Center Express 8.5.
Is there any way to do this? Thank you!

Hi Alicia,
Incase you are planning to obtain real time stats from the CRA_DB which is the UCCX db, this can be done via the use of a wallboard.
-This displays the data such as
available agents in CSQs, call volumes, talk times, wait times, and number of handled calls. You can enable the Unified CCX system to write Unified CCX real-time information to a database that can then be displayed on a wallboard.
-Not sure if this is what you are looking for, let me know, thanks
Prashanth

CISCO UNIFIED CONTACT CENTER EXPRESS - ANSWERING TEMPLATES

It is possible in Cisco Unified Contact Center Express 8.5, Premium, to configure some templates for mail / SMS / chat answers, so all agents can serve customers in a predefined style?

If you are referring CAD Agent EMails you can check the section "configuring Templates" in the link below
========
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cda85ccxug-cm.pdf
========
Regarding chat - Agents can communicate only with team members , supervisors and SME (if presence is enabled). The closest what you can have for the template is "
Predefined High-Priority Chat Message" which can be checked on page 57
=========
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/cad85ccxug-cm.pdf
=====
Hope this helps
Regards
Anuj

Quality Manager with Contact Center Enterprise (not Express)?

Is Quality Manager (part of the Workforce Optimization package) supported with Contact Center Enterprise? The documentation focuses on Express only.
Thanks,
Tom

You buy QM Enterprise direct from Calabrio, and QM Express from Cisco.

Cisco Unified Contact Center Express 8.5 feaures ( Standard License)

Can somebody give some info regarding what are the Highliting feaures that i can have with UCCX Sandard Licenses. ?
Can the Agents use CAD and for Superviosrs CSD ?What are the highligting features available with Sandard License ?
Recording and Silent Monitoring is Possible ?
Configured Licenses:
Package: Cisco Unified CCX Standard
Total IVR Port(s): 300
Cisco Unified CCX Standard Seat(s): 23
High Availability : Disabled
Cisco Unified CCX Maximum Agents: 400

Dear mohamedbineesh,
Allow me to answer as best as I can.
UCCX Standard Edition is quite a limited package, you won't be able to use features like CAD or Silent Monitoring/Recording. You can use Supervisor Desktop, but again, the features are limited, for a full view of features that you can use with Standard Edition, please check the document below:
Cisco Unified Contact Center Express
Solution Reference Network Design
Cisco Unified Contact Center Express, Release 8.
Cisco Unified CCX Packaging
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/design/uccx851srnd.pdf
IPPA features
CSD supported Licensing platforms
I hope this helps. Any question please let me know.
Regards,
Daniel Amador
CCIE# 38898 (Voice)

The sandbox of Unified Contact Center Enterprise always shows the error "Finesse is out of service."

Similar Messages

Maybe you are looking for