The sc command, (service control manager), takes 3 minutes and 30 seconds to create a service on Windows 8.1. and 2012R2
Unique circumstance: SC create This takes 3 minutes and 30 seconds on one domain when
using Windows 8.1 & 2012R2. We have two domains: D1.com
and D2.D1.com. If we place a Windows 8.1 or 2012R2 VM on the D2.D1.com
domain and run the sc command to create a service using a D2.D1.com domain
account it will take 3 minutes and 30 seconds to create the service. It
will create the service successfully, but will take 3 minutes and 30
seconds. If we use the sc command to create a service using the obj=
parameter and use an account which is a member of the D1.com domain as the
parameter, the service is created immediately. Note: using a windows 8 VM
on D2.D1.com domain it does not exhibit the same behavior. Also note that
placing a Windows 8.1 VM on the D1.com domain does not exhibit the same
behavior as well. Consequently, this leads us to believe that the sc
command is timing out on the validation of the domain account and then using a
different validation method which is successful.<o:p></o:p>
Commands
used:<o:p></o:p>
sc create test binpath= C:\windows\test.exe (logged in as D2.D1.com
user) <o:p></o:p>
sc create test binpath= C:\windows\test.exe obj= D1\username password= something<o:p></o:p>
Hi,
Based on my understanding, when you run sc command to create service, it takes long time, but when use sc command to delete the service, it runs fast. right? If so, the issue should be related with the command you used.
I also would like to suggest you refer to the below link to use sc to create service, we may also post in the MSDN forum:
http://social.technet.microsoft.com/Forums/en-US/fe9d60c9-564b-4e82-b27d-9d0effaf87a2/creating-a-service-using-sc?forum=winservergen
Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Service control manager error, event 7011
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T11:43:13.853282700Z" />
<EventRecordID>33762</EventRecordID>
<Correlation />
<Execution ProcessID="668" ThreadID="208" />
<Channel>System</Channel>
<Computer>UTKARSH-PC</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">wuauserv</Data>
</EventData>
</Event>Hi utkarsh,
Based on the information you provided, the “ Service Control Manager“ is responsible for this. In this case, I would suggest to run System File Checker to fix this.
System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files, you can do it in this way:
1.Open an elevated command prompt: type Command Prompt in the Search box, right-click Command Prompt, and then click Run as administrator.
2.and then type: sfc /scannow hit enter.
Or you can follow the article below to fix this:
http://support.microsoft.com/kb/929833
Regards
Wade Liu
TechNet Community Support -
Event 7024, Service Control Manager Error %%16842771
Am running Windows Server 2008 R2 OS. I received a Service Control Manager error, event ID 7024 with an error code of
%%16842771 when trying to stop the PlanetPress Suite Messenger 7 service. Does anyone know what this error code of
%%16842771 means and/or how to fix it? Is there somewhere that I can look up these codes? Here are the details:
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7024
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2013-12-03T16:40:51.395984800Z
EventRecordID
33920
Correlation
Execution
[ ProcessID]
512
[ ThreadID]
11744
Channel
System
Computer
AXE1PPS02P.axe.anixter.com
Security
EventData
param1
PlanetPress Suite Messenger 7
param2
%%16842771
Thanks,
LaurieThe error code may be linked to application (PlanetPress Suite Messenger 7).
So seek help from application vendor once.
Regards, Ravikumar P -
The Diagnostic Service Host service failed to start due to the following error:
The account specifield for this service is different from the account specifield
other service running in the same process.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-05-07T19:04:21.030189900Z" />
<EventRecordID>555930</EventRecordID>
<Correlation />
<Execution ProcessID="868" ThreadID="5052" />
<Channel>System</Channel>
<Computer>PC001</Computer>
<Security />
</System>
- <EventData>
<Data Name="param1">Diagnostic Service Host</Data>
<Data Name="param2">%%1079</Data>
</EventData>
</Event>Hi donm12,
Please offer us more information about the event ID, in your case it must your google related application or service can’t started, please contact your soft vendor for the
further help.
The third party similar issue article:
Troubleshooting ‘At least one service or driver failed during system startup’
http://networkadminkb.com/KB/a148/troubleshooting-at-least-one-service-driver-failed.aspx
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
Hi,
We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
We need to Protected Primary DPM from Secondary DPM.
When install DPM agent got error from secondary DPM console.
“DPM could not connect to the Service Control Manager on these servers ID: 33221”
Checked till now :
Visual C++ redistributable installed.
Checked DNS A record and both server can ping each other,
Widows Firewall off on both servers.
Net stop mpssvc ( Windows firewall service)
sc \\Server1 query
àable
to see result
Thanks,Hi
You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
Do you have any other AV software that have firewalls built in?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Service Control Manager - 7000
I installed Oracle Client on a Windows Pro 2000 computer. In the Event Log I received next message:
Source: Services Control Manager
ID: 7000
Failure at start of service "OracleWebAssistance0" because of a mistake. The service has not answered inquiry in due time.
I have a Oracle8i on Netware 6.0 server. In the Services list OracleWebAssistant is working.
What's the problem?
Michael S. Androsov
EXPOCENTRHi Santosh,
Does this issue occur in your personal computer or in domain environment?
Please take the following steps for troubleshooting:
1. Run gpedit.msc
2. Edit Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assingment -> Profile system performance
3. Add Administrators and NT SERVICE\WdiServiceHost
For more information, please refer to the following thread similar to this issue.
http://social.technet.microsoft.com/Forums/windows/en-US/e4d701f5-a63f-4fee-9b09-89ea9b07e1c3/the-diagnostic-service-host-service-failed-to-start-due-to-the-following-error?forum=w7itprogeneral
Hope it will be helpful.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Service control manager logging system
Hi,
is there any way by which we can configure Service control manager (SCM) in such a way that we stop it from logging certain events , to be specific start and stop of "windows event log" services. can i achieve this by command prompt or using registry
key.
ThanksSystem Center Service Manager is not the same as the Windows service Manager. Consider the windows server forums?
Regardless, the default "service started" notices in the system log are configured per service, and are enabled by default. consider http://msdn.microsoft.com/en-us/library/aa984385(v=vs.71).aspx -
Services Control Manager Issue
Hello All,
The other day I rebuilt a computer here using my automated, sysprepped build(which always works), and then I ran my migration script that does a number of things, one of those things being a netdom renamecomputer operation. When the portion of the script
got to the rename computer part, I received the following error:
The attempt to open the service control manager on COMPUTERNAME
failed with error 1818. Unable to determine if the Certificate Authority
service is installed.
I've never seen this before. Permissions on the services control manager are fine, and I even rebuilt this box twice to see if something got botched in the image process but to no avail. I've tried to research this as much as I can and I can't come up with
anything. If anyone could shed some light on this, it would be much appreciated!
SIDE NOTE: Does anyone know why when deploying a Windows 7 automated build, once completed, the image doesn't always have File and Printer Sharing enabled in the Firewall? I've noticed inconsistencies with this when building out machines
with my image and I don't understand why.
Thanks!
RonFigured it out. Oddly, Netdom.exe was not a part of this particular Windows 7 OS-- why, the world will never know. I copied down the the .exe from a machine that actually had it to system32 on the machine that did not have it and presto-- netdom renamecomputer
worked like a charm. I came to this conclusion by running the netdom renamecomputer command locally on troublesome machine rather than remotely and the error message was much more telling(saying that it didn't recognize 'netdom' as a command).
Cheers! -
Hi
thanks for any advice.I've just install Lync 2013 Standard as the steps in Technet,When I publish the topology,meet the error as listed.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.XdsDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync2012ek.ek2012.net\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value EK2012\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value EK2012\RTCUniversalConfigReplicator.
Found Parameter: Consumeracct EK2012\RTCUniversalReadOnlyAdmins.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync2012ek.ek2012.net\rtc. using windows authentication...
Exception Stack:
Type: System.InvalidOperationException, Message: Cannot open Service Control Manager on computer 'lync2012ek.ek2012.net'. This operation might require other privileges.
Type: System.ComponentModel.Win32Exception, Message: Access is denied.
best regards,
George
George Guoplease verify your computer name while you creating FQDN pool FQDN of Server name
example
computer name
is server1
domain name is abc.ae
so,
your FQDN pool name will be server1.abc.ae
problem solved :) -
Functioning of service control manager(SCM)
hi,
Can anyone give me links where i can find more details about Service control manager(SCM). i have gone through this link
http://msdn.microsoft.com/en-us/library/windows/desktop/ms685150%28v=vs.85%29.aspx
But it is talking about SCM's functionality. But i want to know how SCM interacts (i.e. various methods and functions used) with the services. i want to know about the internal functioning/working of service control manager.
can anyone give me any links related to this.
Thanks,
jaiHi jai prakashh,
The SCM works in the process below:
During system boot, the SCM starts all auto-start services and the services on which they depend. For example, if an auto-start service depends on a demand-start service, the demand-start service is also started automatically.
The load order is determined by the following:
1.The order of groups in the load ordering group list. This information is stored in the ServiceGroupOrder value in the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
To specify the load ordering group for a service, use the lpLoadOrderGroup parameter of the CreateService or ChangeServiceConfig function.
2.The order of services within a group specified in the tags order vector. This information is stored in the GroupOrderList value in the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
The detailed steps and introduction can be found at:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681957(v=vs.85).aspx
Regards
Wade Liu
TechNet Community Support -
Service Control Manager - 7009
I have Oracle client software on my Windows Professional workstation for Oracle 8i for NetWare server. In the Event Log I recieved next message:
Source: Services Control Manager
ID: 7009
Timeout (30000 ms) expectations for connection of service OracleWebAssistant0.
What's a problem?
Michael S. Androsov
EXPOCENTRI have the Oracle8 for NetWare CD (form NetWare 5.1 disk set). This CD includes: Oracle8 Server & Oracle8 Client.
I'm used this disk for my computer.
Michael S. Androsov
EXPOCENTR -
Mac shuts down if I do not keep either the Fn, Command or control button held down ?
Hi. I have a mac book pro late 2011 model. I am running Mavericks but but I have a problem where my mac shuts down if I do not keep either the Fn, Command or control button held down. Also if/when this shut down happens I need to hold the shift-control-option keys to restart the mac.
Anybody got any advice for me ?
Many thanks
PaulTry resetting the SMC.
Barry -
I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?
== Some time back, beggining with Firefox updates, at least three, or more updates ago.Thanks for the tip. I took the following steps:
1) Backed up the existing profile (presumably corrupted somewhere);
2) Deleted the existing profile;
3) Moved the existing Firefox to the Trash and downloaded a fresh copy;
4) Started Firefox (thus allowing it to create its default profile)
5) Copied the following files from the backup copy of the previous profile: places.sqlite, key3.db, signons.sqlite, permissions.sqlite, persdict.dat, cert8.db ---
I'm posting this from a Firefox browser, so I guess I'm OK now. -
When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.
Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.
Maybe you are looking for
-
Getting the Lenovo Dataslim E16 160GB portable drive to be recognised by Windows XP?
Dear Lenovo, I have my portable Dataslim E16 drive communicating to my Lenovo Laptop without issue. I also need to connect the portable drive to my othe Window XP desktop PC. But plug & play has not found a suitable driver. Where can I download a su
-
Connecting Envy 5660 to AT&T wireless network
Can the Envy 5660e be connected to an AT&T wireless router?
-
Hi guys. Ive done a succesfully some JNI examples on the web. I have a c++ application together with the dll given. I do not know how to implement JNI onto the application. anyone can help me in this? btw the c++ is an AXIS camera API application. th
-
G5 (10.5) to Mac Pro (10.6)
I will shortly be buying a new Mac Pro and moving to OS 10.6 from my current G5 and OS 10.5. I will be using the display from the current system with the new Mac Pro. So when I set up the computers to run Setup Assistant, the display will be on the M
-
Anyone having problems using Photoshop CS2 in emulator mode?
I am about to purchase a new iMAC 20 and I'm concerned about being able to use Photoshop on this machine. Anyone having a good experience with that setup? Thanks, Lou