"The share does not exist on the server"

I am trying to run superduper backups to sparseimage files on an external drive attacned to my time capsule from both an imac and a mbp both running Lion. I can do this successfully when I attach the drive directly to the computers. BUt when it is attached to the TC I get an error message "failed to mount ....." and it fails. If I do my Finder trick and open my Time Capsule and then open the external drive so that the sparseimage files show it often will work fine. But after rebooting or even after some passage of time or closing Finder windows it stops working so I can't get my overnight SD backups to work most of the time unless I do the FInder trick and sometimes only after rebooting before the Finder trick. THe wonderful expert at SuperDuper has unsuccessfully tried to troubleshoot this way back in June 2010 which means before Lion and again today with Lion. I do get the following error when opening SuperDuper which might explain my problem but I can not find any help for this error message anywhere else so I hope you all can figure this out:
I also wonder if this is normal. Should cindys-time-cap be there? It just occurred to me, could the ' in the Time Capsule name be the culprit? That sure could mess things up on a PC.

Start with A4 in the 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

Similar Messages

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

"file does not exist on remote server" when uploading image

As the title says, when uploading an image im getting the
message "file does not exist on remote server"......yet dreamwever
has uploaded the file, its there. All other pages on my website
work fine when uploading images. Any ideas?

What image type is it? Is it in an images folder or the root
directory? It would be helpful to post a link.

Requested query does not exist on current server

I have transported a query from DEV to PRD and it went in fine. Now when i try to open the query in designer or analyzer i end up getting error " Requested query does not exist on current server". Though i can run this in RSRT and also can see its entry in RSZCOMPDIR table. Also i am able to execute this query in analyzer when i run it from the history.
Please advice what went wrong and what needs to be done.

Try re-generating the Query in production.
goto RSRT and selet the query. Now click on the third button Generate Report
Now try opening the Query from Query Designer...

Can a directory to be created if it does not exist on FTP server?

Hello SOA experts,
We are good with most common usage of all Adapters. But recently, I am facing a challenge when archive files on FTP server.
Archive files need to be placed into different folders for each month. For instance, ./archive/201308 for files archived in August. Next month, a new directory ./archive/201309 should be created, ideally automatically.
My question is, can I do through some configuration and properties setting to let SOA create a remote target directory when it does NOT exist?
We maintained multiple archive folders for different typr of documents. It is really a hassle to create them manually. And if the target directory does not exist, it would throw errors.
Thank you very much in advance.
Alena Li
CGI

Hi, After reading your post, I myself wanted to test this out. I thought that by configuring the following in the Adapter Wizard it would create the remote directory for me:
<adapter-config name="FW" adapter="File Adapter" wsdlLocation="FW.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="Write_ptt" operation="Write">
    <interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
      <property name="PhysicalDirectory" value="C:\Archive"/>
      <property name="Append" value="false"/>
      <property name="FileNamingConvention" value="%SEQ%\test.txt"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>
It failed on my BPEL instance however I could see that it was trying to create the file. When I created all destinations it was able to create it.
This is my recommendation from what I understand you'd like to accomplish:
Create the different Year&Month folders on your destination from Jan to Dec:
201301
201302
201303
201304
201305
201306
201307
201308
201309
201310
201311
201312
(You can actually create as many as you want going to 2090 if you want...
Add the below config to your JCA File:
<adapter-config name="FW" adapter="File Adapter" wsdlLocation="FW.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="Write_ptt" operation="Write">
    <interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
      <property name="PhysicalDirectory" value="C:\Archive"/>
      <property name="Append" value="false"/>
      <property name="FileNamingConvention" value="%yyyy.MM%\filename"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>
This will allow the files to be dynamically created in the correct directories.
This is a work-around and I hope this works for you.

Check out failed since filename does not exist on remote server

Files are not being listed in the remote site but if I telnet
to the server they are there. This seems to happen sporadically.
Has anyone got a possible explanation?

Hi,
Well, yes I did manage to fix the dynamically linked resources issue. As mentioned above, I did need to mention public_html in my Root Directory setting in server setup (silly of me).
I had tried this at first, but it didn't work, as I had the server set as a test server and not a remote server, anyway, i now have it set as both and all is well.
Except that, the first issue that mentioned is still with me: namely, dreamweaver mentions the public_html in the url path when on live view, which is not correct and I don't know where it is inferring this from. I can change it manually, but this doesn't seem right to me. Am I still missing a setting?
In anwer to the questions:
1) My setting (now) in the Root Directory setting in DW is: /public_html/
2) My actual path on the server (that i mention in php scripts) is: /home/login_name/public_html//path/to/my/file/file.php
[In the advanced settings of DW site setup on the Local Info page I have set Links relative to Document option, although it does not seem to make a difference when I change it to Site Root.]
Any suggestions appreciated.
Thanks
Ian

Transport request does not exist in production server

I created a transport request and released it. However, the cofile and datafile are not created in production server. It supposed to appear automatically once I released, but it is not created and I was not able to add this request in the production. May I know what might be the cause? Any setting that is wrong in my development server?

Hi,
If you have configured transport route properly then when you will release request then it will automatically come in your production queue (Since you have no quality system). If transport is not coming in production queue, it means there is problem with transport route configured.
Also, check whether data file or cofile exists in transport directory or not. If there are no files then it means it is a local transport request.
Thanks
Sunny

Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

Hi,
I am getting this error in most of our WSUS servers.
Content file download failed.
Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
Log Name: Application
Source: Windows Server Update Services
Date: 12/19/2014 4:45:55 PM
Event ID: 10032
Task Category: 7
Level: Error
Keywords: Classic
User: N/A
Computer: ******
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Server Update Services" />
<EventID Qualifiers="0">10032</EventID>
<Level>2</Level>
<Task>7</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
<EventRecordID>496887</EventRecordID>
<Channel>Application</Channel>
<Computer>*****</Computer>
<Data>The server is failing to download some updates.</Data>
This error is happening everyday. Please advise for a fix.

Reason: HTTP status 404: The requested URL does not exist on the server.
Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe
Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
Source: Windows Server Update Services
Description:
The server is failing to download some updates.
This error is happening everyday. Please advise for a fix.
If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
For a downstream server, figure out what the affected updates are and fix the upstream server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain

I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain. Here is the script, need help at bottom
=======================================================
Set objShell = CreateObject("WScript.Shell")
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
IF Right(objComputer,3) = "000" Then
Else
strShortcut = objShell.SpecialFolders( "Desktop" ) & "\%username% Share.lnk"
strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
Set objLink = objShell.CreateShortcut( strShortcut )
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
objServer=Left(objComputer,7) & "-000"
objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
objLink.Save
End If
=======================================================
if "C:\Users\%username%\desktop\%username% Share" exits do nothing
if not create the folder and share it with everyone read only
======================================================
The section directly above is what I need to add, anyone have a clue how to make this work?

Bill: Can you suggest a site? I am in the weeds here trying to get this done yesterday. I have been reading code and trying to figure this out since yesterday morning. I have to roll out this image to 2 dozen machines and
this is holding us back. Any idea which site I can post to for help?
The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you. That is why I have repeatedly suggested that you hire a consultant.
The link to the learning material is at the top o this page. You can also search the web for Windows consultants.
In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
Look up and research the FileSystemObject.
¯\_(ツ)_/¯

Disk " disk " does not exist or is not instantiated after reboot the server

Hi,
I have one issue with 11gR2 cluster. I have 2 node cluster on CentOS 5.5. I am using HP MSA 1000 storage LUNs and create disk group and volume for RAC setup in openfiler.
The whole setup was running fine but before few days some one has recreate the database [clusterDB] using control file. I can see this from alter.log file of "oracle" user. And somehow one node is not able to up and running.
I have no idea what is going on so just restart both the nodes and storage one by one.
After restarting I can not view my ASM disk from /usr/sbin/oracleasm listdisks.
EvenI can not see the ASMdisk from /dev/oracleasm/disks... also I try to querydisk it showing that "Disk "<diskname>" does not exist or is not instantiated"
From the master node I can see the cluster registry configuration through "ocrcheck -config"
*./ocrcheck -config*
Oracle Cluster Registry configuration is :
Device/File Name : +ACFSDG
from the slave when I run the ocrcheck ...it gives error
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage ASM error [SLOS: cat=8, opn=kgfolclcpi1, dep=210, loc=kgfokge
AMDU-00210: No disks found in diskgroup ACFSDG
AMDU-00210: No disks found in diskgroup ACFSDG
] [8]
Any idea what is the cause behind this? There are many errors in $GRID_HOME/log/<hostname>.log file and other referring file. I might be sure that until I enable the ASMDISK/detect the ASMDISK I can not start crs...
Shall I try with restore operation of OCR or replace option in ./ocrcheck...will it usefull?
Let me know if you have already face this issue.
Thanks...
Edited by: user12039625 on Nov 12, 2010 5:30 AM
Edited by: user12039625 on Nov 12, 2010 5:36 AM

Hi,
Thanks for your reply.
I have "/dev/sd*" in my both the RAC nodes and on storage machine it was showing as "/dev/dm-*" whenever I run " fdisk -l " command... and I did this through iscsi initiatior and target and also create "Create Persistent Local SCSI Device Names ".
I also create one script "iscsidev.sh" in /etc/udev and it was perfectly working. Before this issue I was restarted the server and confirm it.
script is below
==============
# FILE: /etc/udev/scripts/iscsidev.sh
BUS=${1}
HOST=${BUS%%:*}
[ -e /sys/class/iscsi_host ] || exit 1
file="/sys/class/iscsi_host/host${HOST}/device/session*/iscsi_session*/targetname"
target_name=$(cat ${file})
# This is not an open-scsi drive
if [ -z "${target_name}" ]; then
exit 1
fi
# Check if QNAP drive
check_qnap_target_name=${target_name%%:*}
if [ $check_qnap_target_name = "iqn.2004-04.com.qnap" ]; then
target_name=`echo "${target_name%.*}"`
fi
echo "${target_name##*.}"
==============
Thanks...
Edited by: user12039625 on Nov 12, 2010 6:04 AM

Node id does not exist for the current application server id on forms

Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
Milan

I already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

    I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
    So cross check both of these, in my case the assembly name was fine,
<Action
    Name="Move Item to Another List and Send Email"
    ClassName="MyAssemblyName.Classname"
    Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
    AppliesTo="all"
    Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

The specified domain either does not exist or could not be contacted when logging in through RDP. Server 2012/SBS 2007

I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry T

Hi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

Input File repository server Error: The requested directory does not exist.

Hi,
Getting following error "The requested directory does not exist." for Input and Out put file repository server.
The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
Thanks,
Manpreet

@Siva,
I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
this was working prior to the Windows AD setup tried by me.

"The share does not exist on the server"

Similar Messages

Maybe you are looking for