The sound balance is skewed to the right.
Hello
Either there is no sound in the left internal speakers, or sound is noticeably lower than the right channel.
Try this;
Post back and let us know if this worked.
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!
Similar Messages
-
I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?
Did you try different headphones!?
If it's sounding the same thing on different headphones then you might have changed the Left-Right balance
Have a look at Settings -> General -> Accessibility
There's a slider for L-R
If it's in the center then the headphone through which you're facing the problem might be damaged, try twisting the headphone wire of the speaker of the headphone (left or right) where you are encountering less volume.
If it's sounding altogether same on all the circumstances, the headphone jack might be damaged. Get your phone to the Apple Store and book an appointment
Try these steps and it will solve your question -
I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.
Go to System Preferences>Sound>Output and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.
-
The sound effects volume is all the way down. It pops up for a second once in awhile and then disappears. I can't find it in the Setting. Music sound plays fine, but no sound on my apps. Any idea how to fix it?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Why when I play a video on my HP G2-34OUs Notebook the sound does not go with the video?
When I play a video from a CD, the sound does not go with the pictures/film. Sometimes the video just stops and will not move forward. This happens on a number of players that I have enstalled.
Hi henryjd,
Sorry to hear about the videos issues, I know that can be frustrating. I will be happy to help. It sounds like you are having an issue with either your video and/or audio drivers. What version of operating system are you running?
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
When plugging in my headset in my iPad, the sound continues to play on the ipad and does not switch to the heeadset. Why? I did not have this problem before.
If you have used earphones in the past then I assume that you realize it takes a very firm push to insert the headphones into the opening - correct?
-
I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???
what application are you using to watch the DVD?
is it a burned dvd? -
The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
iPad Service Answer Center
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPad Repair - iFixit -
the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?
Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
- I tested the headphones and speakers on other devices: they work fine.
- When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
Many thanks indeed!
NG -
Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?If that's the best you can do why don't you get on another forum?
-
I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd -
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
In find my iPhone can I shut the sound if I accidentally press the sound button?
Can I shut the sound if I accidentally pressed the button in find my iPhone?
The sound stops after a minute or two. To get it to stop before then, you would need to unlock your iPhone.
-
I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?
See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error -
i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement.
Maybe you are looking for
-
Get textbox values from ADF table
Hi, I have af:table with input Textbox as a single column in which user can enter values. I have applied valuechangelistener for textbox using which I can get values entered by user. Say I have multiple rows. When valuechangelistener is called, I get
-
What is new with 6.0.4 (3) ? Anyone know?
What is new with this new version of iTunes 6.0.4 (3) - does anyone know?
-
Trouble installing Elements 12, message "cabinet file Data1.cab corrupt"
What can be done to complete installation after receiving the corrupt file message? [email protected]
-
i have purchased an ipodtouch 5th generation. but i set it up as new instead of backup profile from my old ipod. how do i now get my itunes onto the new device?
-
How to block Keynote for iPad (just allowing people to watch)
Hi, I wonder if it was possible to "block" Keynote on a presentation, just allowing people to watch it. I want to make impossible to double click and quit the "play mode". I want to make the power button AND the home button out of use as well. ANY ID