The specified HTTP method is not allowed for the resource identified by the Data Service Request URI

Hi Experts,
          I am getting following error in creating gateway service. 405 method not allowed.
              I am trying to update a table using put method.
Regards,
Dinesh Jeyasurian

Hi Dinesh,
you are getting error because it is not the correct way to perform PUT operation.
Please refer my blog Let’s code CRUDQ and Function Import operations in OData service! and see section Update operation.
Regards,
Chandra

Similar Messages

  • Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F

    Hi Gurus
    I have created a webdynpro abap application in which these steps
    1. Application triggers the workflow and workitem got created through FM1.
    2. Workitem loads up webdynpro abap application from portal or outlook by changing settings in SWFVISU transaction.
    3. Application completes the workflow by calling FM2.
    Here FM1 is SAP_WAPI_START_WORKFLOW which returns the workitem id. When I am giving the same workitem id in function module SAP_WAPI_WORKITEM_COMPLETE , it is giving me error that Method SAP_WAPI_WORKITEM_COMPLETE not allowed for type F
    My workflow has only one activity step which is mapped with class CL_PT_REQ_WF_ATTRIBS and method DUMMY. I have checked the synchronous method.
    Please let me know how can I correct it.
    With regards
    Manu Sharma

    Hi
    You need to give the workitem id of the dialog task which has been configured in SWFVISU. You will get this workitem id via application parameter in your Webdynpro method.
    Wokflow will be completed, if all the steps has been executed
    Vinoth
    Edited by: S Vinoth on Oct 27, 2010 10:08 AM

  • Cannot optimize volume - Receive error "The specified extrinsic Method does not exist"

    When I try to optimize a volume on a server running Windows Server 2012 (R1). I receive the below error. This volume is an ISCSI target to our Compellent SAN. Other Servers don't have an issue with volumes created on the same SAN and I have already ran ChkDsk
    and it returned no errors. Oddly enough I can run a "Defrag T: /D" but a "Defrag T: /O" returns
    "Incorrect Function. (0x80070001)" (Incidentally an "Optimze-Volume T -Defrag" also works) 
    Any Ideas? I'm stumped!
    Command:
    Optimize-Volume -DriveLetter T -Verbose
    Error:
    VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
    VERBOSE: Slab Analysis:  100% complete.
    optimize-volume : The specified extrinsic Method does not exist.
    At line:1 char:1
    + optimize-volume -DriveLetter T -Verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
        + FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume

    I did stumble upon that article as well and working through it didn't help. This is an Exchange 2013 server but I wouldn't think that that would exclusively cause a problem like this (unless there is something under the hood that Exchange 2013 is secretly
    doing). The C drive is for the OS, the M drive is for the Exchange DB, and the
    T drive is for the Logs.  The C drive is "directly" connected and the M and T drives are on the same SAN (different LUNs) via iSCSI. This is running as a virtual guest on VMWare ESXi v5.5.  I have other servers setup the
    same way (not Exchange servers though) with drives on the iSCSI SAN and there are no issues when I run those Optimize-Volume commands. Here is some more output from the console:
    PS C:\Users\administrator> Optimize-Volume -DriveLetter T -Analyze -Verbose
    VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchLogFiles (T:)...
    VERBOSE: Slab Analysis: 0% complete...
    Optimize-Volume : The specified extrinsic Method does not exist.
    At line:1 char:1
    + Optimize-Volume -DriveLetter T -Analyze -Verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-a802-ba7e...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
    + FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
    PS C:\Users\administrator> Optimize-Volume -DriveLetter M -Analyze -Verbose
    VERBOSE: Invoking slab consolidation on iSCSI_SAN01_ExchMailStoreDB (M:)...
    VERBOSE: Slab Analysis: 0% complete...
    Optimize-Volume : The specified extrinsic Method does not exist.
    At line:1 char:1
    + Optimize-Volume -DriveLetter M -Analyze -Verbose
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : MetadataError: (MSFT_Volume (Ob...2-93f1-0050...):ROOT/Microsoft/...age/MSFT_Volume) [Optimize-Volume], CimException
    + FullyQualifiedErrorId : MI RESULT 17,Optimize-Volume
    PS C:\Users\administrator> Optimize-Volume -DriveLetter C -Analyze -Verbose
    VERBOSE: Invoking analysis on (C:)...
    VERBOSE: Analysis: 0% complete...
    VERBOSE: Analysis: 22% complete...
    # ... Repeated ...
    VERBOSE: Analysis: 94% complete...
    VERBOSE: Analysis: 99% complete...
    VERBOSE: Analysis: 100% complete...
    VERBOSE: Analysis: 100% complete.
    VERBOSE:
    Post Defragmentation Report:
    VERBOSE:
    Volume Information:
    VERBOSE: Volume size = 84.48 GB
    VERBOSE: Cluster size = 4 KB
    VERBOSE: Used space = 63.18 GB
    VERBOSE: Free space = 21.29 GB
    VERBOSE:
    Fragmentation:
    VERBOSE: Total fragmented space = 4%
    VERBOSE: Average fragments per file = 1.23
    VERBOSE: Movable files and folders = 153593
    VERBOSE: Unmovable files and folders = 6
    VERBOSE:
    Files:
    VERBOSE: Fragmented files = 2745
    VERBOSE: Total file fragments = 35394
    VERBOSE:
    Folders:
    VERBOSE: Total folders = 4819
    VERBOSE: Fragmented folders = 2
    VERBOSE: Total folder fragments = 2
    VERBOSE:
    Free space:
    VERBOSE: Free space count = 74005
    VERBOSE: Average free space size = 296.00 KB
    VERBOSE: Largest free space size = 409.42 MB
    VERBOSE:
    Master File Table (MFT):
    VERBOSE: MFT size = 308.00 MB
    VERBOSE: MFT record count = 315391
    VERBOSE: MFT usage = 100%
    VERBOSE: Total MFT fragments = 4
    VERBOSE: Note: File fragments larger than 64MB are not included in the fragmentation statistics.
    VERBOSE:
    You do not need to defragment this volume.

  • Item Category: The specified category assignment is not found for this item

    HI All,
    I am loading Item category Assignment for Purchasing category Set, the standard prg fails and gives the error "The specified category assignment is not found for this item".
    Where as for the inventory category set its working fine and the assignment is through.
    Are there any changes required for this.
    Thanks
    Basaw

    As the error indicates, your servlet does not support GET method calls. Override doGet() method to do what you are doing in doPost to avoid this error. If you want your servlet to serve GET as well as POST methods, override service method instead.

  • My friend has an apple iphone 4s, He could not make the ID on icloud, becase at the end of ID creation procedure, the message displayed, " the free icloud ID is not eligible for this device"  what is the solution, thanx

    My friend has an apple iphone 4s, He could not make the ID on icloud, becase at the end of ID creation procedure, the message displayed, " the free icloud ID is not eligible for this device"  what is the solution, thanx

    Your friend will have to create his iCloud account on a different iOS device.  His device has already created the maximum number of iCloud accounts and cannot create another one.

  • A copy has been placed in your outbox the recipient was reject by the server because it dose not allow relaying ...what is the solution?

    A copy has been placed in your outbox the recipient was reject by the server because it dose not allow relaying ...what is the solution?
     

    Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail ServerSMTP>Primary Server then turn Server ON and fill in both User Name +Password under Outgoing Mail Server.
    DOES NOT WORK ...., ANOTHER IDEA?

  • File Extension not allowed for upload

    Hi All,
    I'm trying to upload txt file but i got error message saying that "File Extension not allowed for upload".
    Can tell me where i can set the extension to allow txt, xls?
    Thanks a lot for the info,
    CW

    Hi there,
    There are quite some postings on this topic. Hopefully below thread can help you out.
    BPC- File extension not allowed for upload
    Starting point being the BPC AppSet parameters page:
    http://<servername>/osoft/Admin/SetParameters.aspx
    Rgds,
    Said

  • "ASSIGN not allowed for substrings" error in CONVERSION_EXIT_MATN1_INPUT

    Hi,
    I have a custom function module Z_CONVERT_VALUE_TO_INTERNAL that converts an external value to an internal value - it has a data-element parameter.
    When I use this function module for the data element MATNR, it calls the standard function module CONVERSION_EXIT_MATN1_INPUT, which then causes a short dump at this line of code:
    ASSIGN INPUT(LNG_E) TO <E_PTR>.      "->Eingabe
    The short dump says "ASSIGN not allowed for substrings", and the runtime error is ASSIGN_SUBSTRING_NOT_ALLOWED.
    Any explanation?  Does this line of code work in some circumstances?
    Thanks,
    John

    I've found the explanation.
    For both the function modules above, the input parameter for the external value has no type specified.
    It appears therefore that the type is inherited from the calling program.
    As my calling program was passing the external value in a variable of type STRING, the value was also being passed to CONVERSION_EXIT_MATN1_INPUT as type STRING.
    Hence the error "ASSIGN not allowed for substrings".
    When I changed the type of the variable to character (TYPE C), that solved it.

  • When am reversing 201 document.. 202 is not allowed for warehouse abc

    hi friends,
    when am reversing 201 document.. 202 is not allowed for warehouse abc
    what is the reason and why they have made not allowed.
    thanks and regards,
    Bala R.V

    Dear Friend,
    now i have entered 202 for that ware house but now it is giving an error WP1(wh) GIA TEST 10(cost centre) does not exists.
    Please help me in resolving this issue.
    Thanks and regards,
    Balakrishna

  • Method "equals" not implemented for class "Pan1"

    Method "equals" not implemented for class "Pan1" -- this is the error I'm getting while running one static Analyzer. Can anybody say, what is this error , and how to rectify it ?

    The static analyzer may have noticed that either you may invoke .equals() on instances of this class (possibly through polymorphism) and you have not implemented the method in your class. This is most likely a warning since many times lack of an implemented .equals() method in such cicumstances will lead to Object.equals() being executed and that simply checks to see if the object references are the same - quite a bit stronger than what one would probably expect from .equals();
    it is also possible that you did implement an equals() method but that you used the wrong argument type. This is a common mistake:
    public boolean equals(MyClass other) {
       return /* something */;
    }This type of warning may be ignored, or if it troubles you and there is no way to disable it for the classes that you know you have implemented correctly, you might consider adding an equals method of the form:
    public boolean equals(Object other) {
       return super.equals(other);
    }Chuck

  • Negative quantity not allowed for Put Away Planned

    Dear Experts,
    I'm trying to activate the PDI document but the system show the error message: Negative quantity not allowed for Put Away Planned.
    I was looking the document flow from the item 10 and I saw there is one task was created with quantity "1 box" and the same document was cancelled but the quantity "2 box" was cancelled. I believe because of this is happening the error.
    All items from my HU is with the same problem, duplicate the quantity during canceling.
    Somebody can give me advice how fix it.
    I found a SAPNote but Note 1674037:Negative Put Away Planned quantity (PWP) due to "Store HUs" but I need a workaround to fix my actual PDI and finish the process.
    Regards,
    Alan Mattos

    Hi Petr,
    I checked the transaction SMQ2 and I dont have anything stuck there. Then I tried to change de deliveryquantity but the field quantity isn't available to change. My PDI document already been the Goods Receipt Status "Completed". I try to reverse this document and the system show the message: Delivery is locked (Posting Not Possible). I believe its happening because the PDI isn't active.
    Do you have other idea ???
    Thank you a lot for your help. 

  • Error (Data mining): The specified mining structure does not contain a valid model for the current task.

    I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
    Actual(Service Description).SE value
    Actual([Service Description]).[SE value]
    Actual(Service Description)
    Actual([Service Description])
    just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
    Error (Data mining): The specified mining structure does not contain a valid model for the current task.
    the following is my mining model structure

    Association rules does not allow for cross-validation
    Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

  • The file access permissions do not allow the specified action

    I had an issue while transferring file from source to target..i am able successfully transfer the file to target and later i should move the file to another folder using IO operations.
    it failed at invoke.following are the error
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="summary">
    <summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'SynchRead' failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][S->R,T->R]" IO operation for "xxxxxxxxxxxxxxxxxx/  xxxxxx.txt" failed. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    </summary> 
    </part>
    -<part name="detail">
    <detail>550 xxxxxxxxxxxxxxxxxxxxxxxxx: The file access permissions do not allow the specified action.
    </detail> 
    </part>
    -<part name="code">
    <code>550
    </code> 

    >
    Prasanna Shanmugasundaram wrote:
    > Hi,
    > I have the File to JDBC scenario. The file is extracted in AL11 folder of the Sending (BW) system.
    > The folder is FTP enabled and the Unix admin says he has given full authorization to both the folder and ftp user.
    > But in the File CC I get the following error "Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 TSMSACAIX5350.tar.gz: The file access permissions do not allow the specified action."
    >
    > Can some one advice what is wrong. Im pretty much sure it has to be a problem with the UNIX permission. But the unix admin person says he has given a full permission.
    > I need to know what permissions needs to be given??  Is there different permissions for application level and OS level??
    >
    > Pls advice
    >
    > Thanks
    > Prasanna
    In CC you set ON the delete mode, after processing file? Maybe, the file have read only permission....

  • Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

    Dear Friends,
    In Se38  abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
    Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
    In  the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error  'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
    Please suggest how to resolve the errors.
    Regards
    Sridhar

    Hello,
    Why are you directly executing these programs?
    You will not expect these program to execute directly by going to SE38.
    I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
    For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
    Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
    The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
    Hope this is informative and solves your issue.
    Regards,
    Ravi

  • What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

    I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
    I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
    THANKS

    Hello Paneesh,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s.  I recommend the following steps:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    You can find the full article here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for