The structure in the query
HI,BW experts, I have a question about the structure of the query :is there only one key figure in the query?in my query ,i have a key figure structure already, could I create another key figure structure,and how to ?
Thanks for your help.
Hi Cindy
If your query already has a structure then why you want to create a new one? add new key figures to the exisiting structure.
If you have to create new structure for key figures then
GO to Query change in Query designer & in Columns section do right mouse click and select structure. This will add new structure and then you can add new key figures to that if you need.
Hope this helps
Regards
Pradip
Similar Messages
-
How to replace the structure in the BI Query
Hi Guys
We have a query and we have a structure in the ROWS section. We want to replace this structure with another one which is aviable in the query.
For some reason i am able to remove the structure from the ROWS section but i am unable to drag a new structure in the ROWS section. Any idea what i am doing wrong. We are on BI 7.0 version.Hi Pravender,
Thanks for the quick response. I have tried that option and it does not work.
I am able to remove the existing structure from the ROWS section of the query and able to save the query. When i go back and try to drag and drop the new structure it does not allow me to drag and drop the new structure availble in the query.
apologies for my ignorance. I am new to BI so i might be doing something wrong. Does the structure needs to have any specific properties to be able to drag and drop? I have more than 10 structures availble in the query but i am unable to drag and drop anyone in the ROWS section. -
Copy the structures in a query
hi,
Can we copy the structure of one query to another query ?
If so, please let me know how to do it.
Thanks in advance.Hi,
If the queries in question are on the same Infoprovider, then you can save the structure as a global structure and use it in both the queries.
If the queries will be on different InfoProviders, then you would need to copy at the query level using RSZC.
Hope this helps... -
Show all the structure in the Query
Hi people,
I would like to know if there is some way to show all the structure I created by hierarchy to my query, enven if some nodes there isn´t any data.
I have configurated to show only the lines there is amount. It means it won´t show the lines that have zeros.
But the structure (all of the nodes) I would like to show, include that one there aren´t any datas.
Thanks in advance,
Rosana.Jaya,
You are 10. It worked!.
I only will leave opened this request yet because I would like a new suggestion.
For exemple, I have the hierarchy but on the side "colum" I already have a structure where is restricted by data because it is a report "Year to Date".
On this case, is it possible to do something to show all the structure of the hierarchy?
Ps.: If it is necessary close this request and open a new one, you can tell me ok?
Thanks a lot,
Rosana. -
Level of the structure of the account accounting chart of accounts.
HOW DO I KNOW SOMEONE pull a report that shows the level ACCOUNTING ACCOUNT IN THE STRUCTURE OF THE PLAN OF ACCOUNTS?
EXAMPLE:
BP02 balance sheet structure
1 - ASSETS
1.1 - ASSETS
1.1.1-ASSETS AVAILABLE
111000 - BANK
For this example the level of bank account would be the fourth. I need to know the level of all accounts of the formant chart of accounts.
any help is welcome
thank youGo to OB58
Double click on your Financial Statement Version
Click on financial Statement Versions (Shift+F8)
Then(Shfit+F4)
If this not your expectation, tell us more details
Srinivas -
Modifying the structure of the std CSV file in SNC FTR
Hi All,
We are using the File for SNI Monitor in SNC 7.0 Ehp1 to facilitate the suppliers in uploading their Inventory data (Unrestricted Stock on Hand) for their location products.
The issue with the std. CSV file downloaded from the system is that it has all the key figures from the SNI Monitor which we are not interested in. We want the supplier to just see the following key figures for their location products:
1. Unrestricted-Use Stock- New (its an editable field which the supplier updates in Period0)
2. Unrestricted-Use Stock- Original (which contains the current inventory data in the SNC system for the location product)
Now our concerns are:
a. We are not able to apply the filter to the CSV file for the above key figures as a blank line between location products prevents filtering. This makes it very cumbersome for the supplier to update the stock data for 200+ skus using the std. file
b. We tried formatting the std. file but ended up with errors on upload.
Can anyone share their inputs on how to simplify the structure of the Std. CSV file.
Note: We are looking for std. solutions.
Regards,
BharathHi Mayari,
though you were successfull with
METHOD cl_alv_table_create=>create_dynamic_table
I must warn you not to use it. The reason is that the number of tables created is limited, the method uses GENERATE SUBROUTINE statement and this triggers an unwanted database commit.
If you know the DDIC structure, it is (starting with ECC6.0) much easier:
field-symbols:
<table> type standard table.
data:
lr_data type ref to data.
Create data lr_data type table of (<DDIC structure>).
assign lr_data->* to <table>.
The split code can be simplified gaining speed loosing complexity not loosing functionality.
field-symbols:<fs_s> type any.
field-symbols:<fs_t> type any.
SPLIT lv_rec AT ';' INTO table it_string.
loop at it_string assigning <fs_s>.
assign component sy-tabix of wa_string to <fs_t>.
if sy-subrc = 0.
<fs_t> = <fs_s>.
endif.
at last.
append <fs_itwa3> to <ft_itab3>.
endat.
endloop.
Though it may work as Keshav.T suggested, there is no need to do that way.
Regards,
Clemens -
The structure of the profit center report in new GL
Hello,
I must finish a query for the customer this week. This query must base on a sap standard report for the new GL.
Because our ECC 6.0 system hasn't the Enhancement Package 3 (contains the necessary new features) yet, so I can't see this standard report which should be displayed under the path:
SAP Menu --> Accounting --> Financial Accounting --> General Ledger --> Information System --> General Ledger Reports (New) --> Profit Center Reports --> S_E38_98000088 - Profit Center Group: Plan/Actual/Variance
Can somebody tell me the structure of this report, if you can see this report in your system?
- Which key figure has been used in the report?
- What are in the rows and columns?
- Which characteristics are available to navigation?
- Which variables and General data selections are there?
Hope somebody can help me. Thanks a lot!
Best regards,
YuanyuanHi,
Then my suggesion is you copy the form & report structure of most suitable report (which you have downloaded through FGIQ) .Modify the form according to your reporting requirement. Create new report by coping standard report & assign this newly created form to this report.This will serve your purpose.
Please do not make any changes to standard report.Copy it & then do the changes.
Transaction code for the same is FGI0 or FGI1 or FGI2 or 3 or 4 or 5 or FGI6.
Second suggestion is in SPRO in GL information system (infact in each information system ) you will find drilldown report node in that import report transaction e.g. FSIQ .Import all reports you might get your required report.
Regards,
Abhijit -
Does SharePoint search depend on the structure of the site
Hello All
I am a be gainer in sharepoint server 2010
My question is, in front of me there are two structure for storing the document
one --
The are hierarchical structure like
My site -- Team site -- India --
IT -- document library 1 -- list of documents
Sales -- document library 2 -- list of documents
Consulting -- document library 3 -- list of documents
and flat structure like
My site -- Document center --
document library 1 -- list of documents
document library 2 -- list of documents
document library 3 -- list of documents
Now my question is , would it be easier to find a doc, if all of the documents are in one document center? or it does not matter, whether they are on the page(hierarchical) structure?please give a details overview if possible
NilanjanIt depends on the query you are using to find the document. In your first example you can find all the documents related to Sales by searching on 'Sales' and finding that document library. In the second example it would depend on how the documents
are tagged with metadata. If all the Sales documents have Sales as a value in one of the columns associated with the document you could still find Sales. The structure itself doesn't affect the search result. But the hierarchical structure
may add context that can be used in searching that may not be present other ways.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
How to use the structure in the EXIT_SAPMM06E_013 function module
Hello Experts,
Please guide me how to use the structure defined in function modules under table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
Best Regards,
Sandesh.SreyamshCan you please elaborate little bit more what is the actual requirement?
-
So is this going to be the structure of the new fo...
I have been as objective about this as I can but have to say I don't like the lack of clarity of the new forums, and would prefer clear areas of discussion such as:
Connectivity
Security and Privacy
Gaming
HomeHub
BT Vision
Phones
Billing issues
Computer Issues - Hardware
Computer Issues - Software
Suggestions
Email
Web Authoring
An area such as BT in Home can cover a whole range of topics and gets very cluttered, and some of those topics can equally belong to, say, BT Out and About. And often one does not know where to post things - just look at the number of posts that have been moved from Forum Help and Suggestions, where people have posted because they don't know where else to go.
What do others think?
Value Added Guest (Inspiring Not Aspiring)
Rate a post if you like it! - just click the star under the user's name on the left. (N.B. ratings facility no longer available in Forum Help and Suggestions; nor is it available in the Lounge)Allan_Quatermain wrote:
Aye to that. Just to add that a point was made back in January by Alun H about a General Discussion forum which seemed to generate interest.
All the best forums have a Lounge where folk can discuss OT matters. It helps to build that essential spirit of camaraderie. The bt usenet groups have one and it's mostly inhabited by a handful of people making harmless smalltalk, one or two popping into the "serious" groups now and again to seek or provide learned advice.
Allan_Quatermain wrote:
Cant see the logic in reducing the number of post-headings myself, unless it is to reduce the traffic on the forum, which it seems to have done.
Yup, it's just not humming is it. And there's already a new thread in this group that supports my case for a Connectivity group - thanks Sid
Value Added Guest (Inspiring Not Aspiring)
Rate a post if you like it! - just click the star under the user's name on the left. (N.B. ratings facility no longer available in Forum Help and Suggestions; nor is it available in the Lounge) -
Modifying the structure of the output by adhoc query designer
Hi,
Is there any way of modifying the output structure[row, column width, background color,font ] of the result given by the ad-hoc query in WAD.
I want to change the font,size, color of the text output given by executing the query using the ad-hoc query designer.
Please let me know if i can modify some class or method to do so or any other possibility?
Thanks
SachinHi Sachin,
If you are designing a Table or a Chart on WAD , then you have the option of changing by right click on Table or Chart and click Properties/Edit properties.. here you can change the output color, font, background, width, number of output rows.. etc
hope this helps,
Thanks,
Sudhakar -
How to add F4 pop-up to a zfield (appended in the structure) in the search.
Hi Friends,
I have a doubt and need your help to get it resolved.
I have a search view, and i have appended a field Product_hierarchy to it. now the field is displayed in the UI .
I have added the component usage of the product category search help in my component also.
now i tried to put the code in get_dquery_valuehelps:
WHEN 'ZZPROD_HIERARCHY'.
CALL METHOD cl_crm_uiu_bp_cust_get=>get_values_for_field
EXPORTING
iv_fieldname = ................................... ( what should i enter here)
IV_PARTNER =
RECEIVING
rt_value = lt_ddlb
or i should follow some other approach. right now i am getting Prod_hierarchy in UI with the DDLB showing message 'This Method is not implimented yet'
Please suggest.
Regards,
VDYou need to implement get_v method.
also implement an outbound plug
also implement an event eg: SEL_IBASECOMPONENT. this gets called when you close the popup
Example --
method GET_V_IBASE_COMPONENT.
create object rv_valuehelp_descriptor type cl_bsp_wd_valuehelp_navdescr
exporting
iv_outbound_plug = 'OP_FINDIBASECOMPONENT'.
endmethod.
method OP_FINDIBASECOMPONENT.
data:
lv_title type string.
IF ibcompvaluehelp_popup IS NOT BOUND.
lv_title = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_UIU_BT/IBCOMP_SEARCH' ).
ibcompvaluehelp_popup = comp_controller->window_manager->create_popup(
iv_interface_view_name = 'MainWindow'
iv_usage_name = 'ZWTS_IBaseVH' "the comp usage name in the component
iv_title = lv_title ).
ENDIF.
ibcompvaluehelp_popup->set_on_close_event( iv_view = me iv_event_name = 'SEL_IBASECOMPONENT' ).
ibcompvaluehelp_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
ibcompvaluehelp_popup->open( iv_inbound_plug = 'SEARCH_COMP_F4' ). "look at the child component to find plug.. you can assign "DEFAULT" if not sure
endmethod.
METHOD eh_onsel_ibasecomponent.
lv_context_node = ibcompvaluehelp_popup->get_context_node( iv_cnode_name = 'IBCOMPONENTLIST' ). "look the child component and find the context node related to the search help result list
lv_col_wrapper = lv_context_node->collection_wrapper.
lv_current ?= lv_col_wrapper->get_current( ). "the selected record from the search help(child component) will be available here
"then pass value from this entity current to your own context node(parent component) -
What is the use of abap query?
hi sap gurus,
good morning to all,
what is the actual relecance of abap query ?
i know that we can generate simple reports
but
what kind of reports ?
give some examples plz.
regards,
balaji.t
09990019711Hi Balaji,
Here is the details of ABAP Query
ABAP Query
An ABAP Workbench tool that enables users without knowledge of the ABAP programming language to define and execute their own reports.
In ABAP Query, you enter texts and select fields and options to determine the structure of the reports. Fields are selected from functional areas and can be assigned a sequence by numbering.
ABAP Query offers the following types of reports:
Basic lists
Statistics
Ranked lists
I hope it will clear for you,
Regards,
Murali. -
Hi Experts,
I am using same structure in different queries, actually the two queries are same (but saved as with small changes).
In the structure of one query i have created one formula and assigning 0.
When i replicate the same in the other query i am facing an error "uncaught exception" and i am not able to run the query.
Can anyone help on this.,as this issue is critical would appreciate fast reply.
Regardsdelete ur query b
save ur query a AND do SAVE AS and save it as query c
now make ur changes
make all small changes
and see if it let u do that. -
How to retrieve data from database to the structure(complicated)
Hello everyone:
I want to retrieve data from database to the structure. but the structure defined like this below:
TOLERANZOB LIKE QAMV-TOLERANZOB
TOLERANZOB1 LIKE QAMV-TOLERANZOB
so how can I retrieve the data from the database ? make sure that the two fields contain data both.
Thanks in advance .
Regards
NickHi Nick,
To retreive data for TOLERANZOB from QAMV,
If you know the key fields then use
SELECT SINGLE TOLERANZOB FROM QAMV INTO TOLERANZOB WHERE keyfields.
else, you can use
SELECT TOLERANZOB FROM QAMV UPTO ONE ROWS INTO TOLERANZOB WHERE....
Once you retreive the data using the select query, you can check if it is initial and if not move the data from TOLERANZOB to TOLERANZOB1.
<b>Reward points for helpful answers.</b>
Best Regards,
Ram.
Maybe you are looking for
-
Error while creating the Flash Chart
Hi , While creating the Flash Chart i got the following error.. Error Item ID (4789301958029267) is not an item defined on the current page. What does it mean???? My Chart Series is: SELECT NULL LINK, DISTRIBUTOR, CLGASSETS, FOLIOS FROM ( select NULL
-
I open a new webpage in a new tab. I then go to a link and the back button does not allow me to go back to the original webpage. Any suggestions?
-
Reg.Raise PO without PR against sales order number
Dear priyanga I want to raise PO against sale order,How to configure against sale order (200000346). I configured against cost center for that I create Cost centre and G/L account and assignment that's all. Like what are the settings needed. Pls help
-
my laptop's cooloing fan is not working properly....can i use the laptop with this problem
-
How can I make songs shuffle in individual playlists..?
I want them to shuffle so when I burn them onto CD's they will be shuffled...but on the playlist, they are still organized into artists and albums. How can I make this stop?