The 'Third Party Connections' drop down box on the 'Source Database' step in the Migration Wizard is empty.

Here are the environmental details:
SQLDeveloper 32-bit Version 3.2.20.09 (Build MAIN-09.87)
Oracle Database: 12C single instance (no RAC)
Oracle client: 12C 32 bit
Windows 64 bit desktop
I am attempting to migrate an MS Access application to Oracle. I pick the ‘Migrate’ selection from the ‘Tools’ Menu SQL Developer. This puts me into the Migration Wizard. When I get to the ‘Source Database’ step of the migration wizard, the ‘Choose the Third Party database from which you are migrating’ drop-down box is not being populated with the current available connections. It is empty. If I type a valid connection name into the box, SQL Developer takes it on this screen but does not keep it for the next screen/step. It has no persistence. I even tried to make sure that each connection was open/connected before beginning the migration process.
Due to the fact that I am attempting to migrate an MSAccess application, I am mixing 32-bit and 64 bit software. This may be the issue as to why the drop down is losing addressability. I have not applied any patches to this version of SQL Developer.

Hi,
If you need easy way to migrate Microsoft Access to Oracle probably it is more reasonable to review some tools specially designed to this purpose. For example:
Access to Oracle converter by Intelligent Converters
Access to Oracle converter by SpectralCore
Access to Oracle converter by Interface Computers
Hope, this will help.
Sincerely,
Vlad

Similar Messages

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
How do I get version 4 to do this?
Thanks.

The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
1) type in longer strings that narrow the search
2) use an add-on to search just the beginnings:
https://support.mozilla.org/en-US/questions/1037469
3) install an older version of TB:
http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

Getting the value from a Drop Down Box

I'm working on a database project to keep track of our Blackberrys. The problem I'm having is entering the values for two drop down boxes. The page I'm working on enters the FirstName, LastName, Department, and Location. Department and Location have thier own Primary Keys and are foreign keys in the Person table. Departments and Locations are aligned by numbers like 1 = Ohio, 2 = Chicago. They
don't automatically increase. The problem I'm having is entering them as a foreign key in the Person Table. I'm not sure if I use a getValue or getSelected or some other code to get the values to populate in the Person Table. I just keep getting a can't add department or location to table.
public String newUser_action() {
// TODO: Process the button click action. Return value is a navigation
// case name where null will return to the same page.
if (personDataProvider.canAppendRow()) {
try {
RowKey rowKey =
personDataProvider.appendRow();
personDataProvider.setValue(
"DBO.PERSON.FIRSTNAME", rowKey,
firstName.getText());
personDataProvider.setValue(
"DBO.PERSON.LASTNAME", rowKey,
lastName.getText());
personDataProvider.setValue(
"DBO.PERSON.DEPTID", rowKey,
department.getSelected());
personDataProvider.setValue(
"DBO.PERSON.LOCATIONID", rowKey,
location.getSelected());
personDataProvider.setValue(
"DBO.PERSON.BEGINDATE", rowKey,
newDate.getText());
//personDataProvider.setValue(
"DBO.PERSONDEVICE.AQUIREDATE", rowKey,
newDate.getText());
personDataProvider.commitChanges();
info("New User " + newUser.getText() +
" added to USER table");
newUser.setText(null);
} catch (Exception e) {
log("Cannot add new User ", e);
error("Cannot add new User: " +
e.getMessage());
} else {
log("Cannot append new User");
error("Cannot append new User");
return null;
}

Sun's databound components tutorial may prove helpful to you.

HT4864 The Outgoing Mail Server drop down box in mail setup keeps reverting back to 'None' - anyone have any ideas why?

Hi
I've been having difficulties with mail on my Mac and have checked all the settings. I have three mail accounts, 2 iClouds (different acct names) and 1 bigpond account.
Whenever I change the outgoing mail server drop down boxes for the iCloud accts and save my changes, I go out of it then when I go back to the iCloud accts the drop down boxes for both iCloud accounts have reverted back to 'None'.
Is this of any relevance? Is it 'normal'?
I've tried deleting all mail accounts and adding them all again but the same thing still happens.
I have been on Apple Support and followed the Mail Acct setup tutorial.
I'd appreciate any help on this matter thanks.

Thanks for your reply Winston Churchill.
Because I'd been having problems which had recently been resolved by AppleCare Support I decided to go through all my accounts and check their individual settings. I found a Tutorial on Apple support for setting up or verifying email account settings and found mine were different so I changed it.
In any event I took your advice and just went with the option of automatically setting the iCloud accounts up and I haven't had anymore problems thus far - fingers crossed.
I do however note that my drop down box in account settings still says 'none' for the outgoing mail server and the 'use this server only' check box isn't ticked despite being ticked in the 'verify account' info on the tutorial, so hence my question to the community - did this matter and what was the difference?
I will let sleeping dogs lie I think and will see how I go.
Many thanks for your help.

When I'm on Facebook and play Fish World, sending gifts is no longer working, the drop down box won't open enough to see the "send" button. It works in other games, but not in Fish World, and I contacted Fish World who said it was a browser problem.

starting yesterday I cannot get the drop down box to open to send gifts to my friends. Fish world told me a few weeks ago it was due to some updates with Facebook, but now that has been fixed and I can't get the game inFB to work. It works with other browsers - Chrome and IE9. Is there something I need to do on my end to fix this? Other facebook games work fine with drop down boxes, it's only fish world.

problem solved

Drop Down Box Choose A Name and Have only the first name show up

I am creating a form for health care.
I have a drop down box with names of Physicians... their full names so they can be easily identified. And then subsequent fields that will be populated based off of the choice. However What I need is that after the full name from the drop down list is selected than only the Dr's First name shows up in the box to be distributed through out the file. All the rest of the information is already in using this Java:
switch(this.rawValue){
    case "MD":
        form1.Page1.Physician1LastName.rawValue = " Acccc";
        form1.Page1.Physician1Number.rawValue = "1111111111";
        form1.Page1.Physician1Fax.rawValue = "2222222222";
        form1.Page1.ClientEmail.rawValue = "[email protected]";
        form1.Page1.Physician1Address.rawValue = "xyz suite ";
        form1.Page1.Physician1City.rawValue = "XYY CIth";
        form1.Page1.Physician1State.rawValue = "XZ";
        form1.Page1.Physician1Zip.rawValue = "11111";
        form1.Page1.Physician1NPI.rawValue = "111111111";
        form1.Page1.Physician1License.rawValue = "ABBB111111";
        form1.Page1.Physician1UPIN.rawValue = "A11111";
        form1.Page1.Physician1Specialization.rawValue = "Internist";
        break;
And is working beautifully thanks for previous help everyone.
Here is the example from the Drop Down list choices:
     Dr. Aaaaa Abb Accccc
     Dr. Baaaa Bbb Bccccc
I would like to choose :
     Dr. Aaaaa A Aaaaa
and upon chosing it have it show only the first name in that field so it can be processed correctly through out the rest of the fields.
ie:    Aaaaa   (Only nothing else)
I am a horrible at this stuff I just surf around until I find something that works and copy and paste and play until it works
So Please be specific:
Java vs FOrm: Client: Choice   and code ....
Thanks SO much ....

Take a look at the attached. The script assumes the name is a three-part string such as Dr. Frank Burns. You can modify it according to your needs.
// form1.page1.dd::exit - (JavaScript, client)
if (this.rawValue != null) {
var doc = this.rawValue;
var i = doc.indexOf(" ");
doc = doc.substring(i+1,doc.length);
this.rawValue = doc.substring(0,doc.indexOf(" "));
Steve

Why can't the Accordian widget's drop down box span full width in mobile layout?

I'm trying to create a simple drop down navigation for mobile. When the entire header is clicked, it expands down to reveal a dynamic vertical menu, which will cover the page content below, not push it down.
I've taken an accordian widget and added a vertical navigation widget (to allow dynamic navigation) into the expanded area. When I preview it, the drop down box of the accordian widget doesn't span the full width of the site width (380px). It stops 5-10px short of the right edge, which is a small detail, but it annoys me, and is not how I have it set up in design view. There is no other content on the page, just this element. When I have elements extend off the page area, it somehow affects the amount of space the drop down area stops short from and adds more. Strange again. Kind of stumped as to if/how I can fix this.
Screenshot attached.

The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory.

I want to delete history; the drop down box shown in your instructions is NOT the drop down I get when I right click; the drop down menue I get DOES NOT offer a delete option....I'm stuck, What do I do?

I am following the directions give in 'Help'. However, I cannot follow them because the Assumed drop down menu is not the one I get, so I am stuck.
I want to delete my History...
...how is this done?

See:
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]
* [[Smart Location Bar]]
* http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

I just sent the following in a drop down box that allowed reporting system problems:I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook: Hardware Overview:    Model Name:     MacBook Pro   Model Identifier:     MacBo

I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook:
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,4
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.53 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP53.00AC.B03
SMC Version (system):          1.49f2
Serial Number (system):          W8******7XJ
Hardware UUID: ******
Sudden Motion Sensor:
State:          Enabled
1. The scrolling, as far as I've been able to determine, is by using the slide bar to the right of most diplays. There are no up or down arrows that allow slow movement
2. The top and botton toolbars are not visible. The top one appears when you point the arrow to the top of the screen but the same doesn't work well if at all pointing the cursor to the bottom.
3. When downloading, something jumps to the upper right of the screen. I could point and click it and get a diplay if my downloads. I was attempting to fix some of the above. Now the little thing jumps off the screen and I can't get to it.
4I was trying to installMacBook Pro EFI Firmware Update 2.3. I got message it couldn't be installed on my system.
5. The red yellow and blue bullets that allow shutting down, minimizing and maximizing are missing on most open windows.
Can you do something about these problems
It's problematical that one can't communicate directly with Apple to resolve these problems
<Edited By Host>

1: I'm scrolling this page right now using the arrow keys.
2: Press the escape (esc) key to exit full-screen mode. Select Apple menu > Dock > Turn Hiding Off.
3: ???
4: That's because you downloaded an update for another model.
5: See 2.

Set the default in a drop down box using BHTML

Hi,
I've got the following code in my html template:
`repeat with i from 1 to g_curr_name.DIM`
<option value="`g_curr_code<i>`">`g_curr_name<i>`</option>
`end`
This works fine, it displays all the values I've set from my program. But I want to default the selected value to be USD. Currently the list is sorted alphabetically so USD is somewhere in the middle.
What's the correct code to check if the code is USD and then make that the selected one? Maybe something like this:
`repeat with i from 1 to g_curr_name.DIM`
`if ( g_curr_code = "USD" )`
<option selected value="`g_curr_code<i>`">`g_curr_name<i>`</option>
`else`
<option value="`g_curr_code<i>`">`g_curr_name<i>`</option>
`end`
`end`
This code doesn't work and I've tried a few other ways but nothing works. I don't know HTML so I might be making a basic error.
Thanks for your help.
Gill

Hi,
Use ingle quotes for USD like 'USD'.
it will work.
regards
Satya

How do i change the backgrond color of a drop down box.

I'm creating a form which has a colored background and a drop down box with 5 choices. The problem is the font color in the drop down box is white and so is the background color of the drop down box so the selections are not visible unless you scroll over them. I would like the background of the drop down box to match the background of the form.
Also, can the font size of a selection in a drop down box be different then what is displayed. The font is set to 35 so it's huge when displayed in the drop down box. It would be nice if the selections were displayed in the drop down box in size 10 font but displayed on the form once selected as size 35.
Thanks!
Mike

You can set the background colour with (in formcalc):
$.fillColor = "5,5,5" // obviously changing the numbers to the RGB colour you want
or if it is not going to change just set it in Border tab under Background fill.
For the size of the font - set the dropdown box to size 10 font and then in the exit event of the dropdown list put (in formcalc):
$.font.size = "35pt"

How to insert drop-down box into the already set-up table ?

if i have a table already set up, and i do want to add the drop-down box into each column like in the excel. how would i do that ? this drop-down box would allows me to specifically select the data as shown on the screen.

Hi Bondwaan,
I am not sure wht you are asking but I suspect it has to do with a popup menu. If that is the case, a popup menu is a formatting choice.
If you need more info, you will need to ask a more specific question.
quinn

Adding '-Select-' on top for a drop down box

Hello,
I have a drop down box mapped to a field in the context, the field has some domain values and are populated in the run time. but I have to add another top row '-Select-' indicating to the client that the field need to be selected.
To add 'Select', I can write a method in the WDDOINIT method of the controller and also loop through the domain values and append to the drop down box. But I don't want to do too much of d/b interaction, as the fields are anyway loaded to the dropbox by mapping.
Is there a way in web dynpro, that we could do like in normal ABAP reports, to Loop at the screen and identify all the drop down boxes and add a 'select' row at the top?
I really appreciate any help.
Thank you
KV.

Hi Kiran,
Can you make your requirement more clear to me?
As much I understand from your message is that you want to add a dynamic Text on the top of Dropdown.Like Select the field need to be selected.
from where you will get this field information?
what message you want to add?
If you have the field information then
(a)Create a textView on the top of Dropdown
(b) Bind it's property "Text" to the context attribute say Text .
(c) now set this value like
wdcontext.currentcontextelement().setText("Select "+field);
If this is not the right interpretation of your problem then please explain it in detail and tell me step by step what you want to do?
Regards,
Praveen

How to set default value for drop down box in jsf

Hi,
Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
Any help must be appreciated.
Regards,
AK

Hi Frank
My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
TPSearchCriteriaBean.java****************************************
/** Constructor */
public TPSearchCriteriaBean() {
super();
entityType=new ArrayList<String>();
entityType.add(UIConstants.LIST_ITEM_ALL);
authorizationType=new ArrayList<String>();
authorizationType.add(UIConstants.LIST_ITEM_ALL);
companyType=new ArrayList<String>();
companyType.add(UIConstants.LIST_ITEM_ALL);
mrgStatus=new ArrayList<String>();
mrgStatus.add(UIConstants.LIST_ITEM_ALL);
legalStatus=new ArrayList<String>();
setEntityType(entityType);
setAuthorizationType(authorizationType);
setCompanyType(companyType);
setMrgStatus(mrgStatus);
country = "0";
//address = new AddressBean();
UIConstants.java***********************************************************
public static final String LIST_ITEM_DEFAULT = "select";
public static final String LIST_ITEM_ALL = "0";
LOVManager.java*****************************************************************
public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
log.debug("LOV loading for " + lovType + ": START");
List<SelectItem> lovList = new ArrayList<SelectItem>();
//check validity of lov loading request
validLov:
for (int i = 0; i < lovTypeArray.length; i++)
if (lovTypeArray.equals(lovType))
break validLov;
log.debug("ERROR: LOV Type not valid.");
return lovList;
//First select is replaced by ALL here
//<-- Select --> should be an option
if (requiredOption_SELECT)
lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
LOVDao dao = new LOVDao();
dao.loadLOVValues(lovType, lovList);
log.debug("LOV Loading successful!");
//<ALL> should be an option
if (requiredOption_ALL)
lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
return lovList;
Kindly help me.
Regards,
AK

From database to drop down box

Hi all,
Suppose I have the following
String query ="Select name, number from Person";
I want to put all the "names" in a drop down box and all the "numbers" in a separate drop down box. When I do this:
while(rs.next()){
<select="person" onchange="showSelection">
<option value="<%=rs.getString("name")%>"><%=rs.getString("name")%></option></select>
I only get the value of the first name in my table. Can anyone help me?

Hi
I think you need to do some order. my suggestion is to create an Object that contains name and number like this:public class MyClass {
     String name;
     int number;
     public MyClass(String n,int num){
          setName(n);
          setNumber(num);
     //set and get methods for the data members...
}next, roll over the ResultSet and create MyClass object each time and add it to a Vector or something like that. usually a drop down box displays many times and it will be very bad if you will query the data base each time you want to display it, thats why i suggest you to save this Vector in a bean or somewhere else (of course, if the data is static).
than display the vector content like this:<select name="person" onchange="showSelection">
<%     Enumeration e=vec.elements();
     while(e.hasMoreElements()){
          MyClass m=(MyClass)e.nextElement();
%>          <option value="<%=m.getName();%>"><%=m.getName();%></option>
<%     }%>
</select>
<%     e=vec.elements();
%><select name="number" onchange="showSelection">
<%     while(vec.hasNext()){
          MyClass m=(MyClass)vec.next();
%>          <option value="<%=m.getNumber();%>"><%=m.getNumber();%></option>
<%     }%>
</select>pay attention on how you wrote the select tag: <select="person"...
and not: <select name="person"...
hope it helps
mamtz
BTW
think of using struts and custom tags in jsp it will much easier to do this!!!

The 'Third Party Connections' drop down box on the 'Source Database' step in the Migration Wizard is empty.

Similar Messages

Maybe you are looking for