The UML Package model could not be resolved - SOLVED
I am using Perforce with JDeveloper 10.1.3.2.0. I have imported a project into Perforce on one machine, then 'p4 sync -f' on another machine. I then created a new application on this machine and added the projects to it. Now, when I try to open a diagram in package 'model', it gives this message:
The UML Package model could not be resolved
The element may have been moved or deleted from the file system, or the Model path, source path or classpath may be incomplete. This error can also occur when the element was found, but errors in its definition prevented it from being loaded. Examine the error stack for further information on the exact cause.
It also looks as if certain other files in the other projects are missing - it looks like a problem with the Perforce extension to me, or is it because I do it wrong?
Message was edited by:
jandersen
It gets stranger and stranger, I think.
As I told, I imported the project into Perforce, to a directory called /dtl/admintools, and found that I could still open all files - I did find that one file was missing (/dtl/adminstools/sysadm/SysAdm.jws), so I added it to Perforce. I then removed everything under /dtl/admintools and sync-ed it out from Perforce on the same machine - it still worked fine.
I then went to my home computer and did the same thing (over a VPN) and checked that I had received all the files, which I had. I then tried to open /dtl/admintools/sysadm/Model/model/model/SysAdmDiagram.oxd_bc4j, which contains entity- and view objects - this give the error message. I can see all the objects listed in the structure list, but if I try to open any of them, I get the same message. There are no error messages other than the one that pops up.
Both my workplace computer and my home one are AMD 64 machines running Gentoo Linux and it's the same version of JDeveloper too.
Similar Messages
-
TS5168 some of my pictures say that the necessary data reference could not be resolved. help
some of my pictures say that the necessary data reference could not be resolved. help
It means iPhoto can't find the file.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
BME-00600: The UML Package ... could not be resolved - When opening diagram
Hi everybody,
when opening an existing activity diagram we are receiving the error below. The files are present on the filesystem. Other diagrams like database diagram could be opened with no problems.
We are using JDeveloper version 10.1.3.0.3 (Early Access / Win XP).
Any ideas?
Thanks,
Marcus Kresin
Message
BME-00600: The UML Package cargo could not be resolved
Cause
The element may have been moved or deleted from the file system, or the Model path, source path or classpath may be incomplete. This error can also occur when the element was found, but errors in its definition prevented it from being loaded. Examine the error stack for further information on the exact cause.Hi,
I am not sure how you got into that state; but you should be able to work around it my creating the missing packages in the navigator. Simply go to New -> Gallery -> General -> UML -> Package. Once in place the diagram should now open.
Thanks,
Gerard -
Chosen font and font encodings differ & could not be resolved editing problem
Can anyone advise how I can edit text in a document I received? The document was generated by Ghostscript.
When attempting to edit text, a message says, All or part of the selection has no available system font. You cannot add or delete text using the currently selected font.
When I try to alter the font through Touchup Properties, the error message says, The change to a different font was not done because the chosen font and the font encodings in the document differ and could not be resolved.
I use Adobe Acrobat Standard, version 7.0. Is this problem solved in versions 8 or 9?This IS an Acrobat problem, as they should have anticipated this problem and created a way around it (fall back to a more common font, for example).
The work-around is to copy the text, create a rectangle with a white fill color, then place it on top of the text in Acrobat to cover it up. Paste in the text using whatever font you wanted. -
DW CS5 Dynamically related files could not be resolved
I have used David Powers books over the years and always managed to get my php working properly locally even though I had no idea really about all of the changes to the settings etc that he detailed in his books. The thing is it all worked.
So, now I have DW CS5 and the Xampp download to do everything for me and it sort of worked for a while but then it stopped with the "Dynamically-related files could not be resolved message" now always appearing for every site.
I tried uninstalling Xampp and reinstalling it but that didn't work. Xampp seems to be installed correctly when I go to localhost/xampp.
When I go to localhost I get the 'Index of' / page listing all of my website folders.
I'm using Win 7 64bit.
John FDO NOT TAMPER with core word press files. These pages get all their info from multiple server-side include files and content stored in the MySql database. In short, there is no static content to edit in the core files. WordPress is all dynamically populated by the server.
The ONLY files you should be working with are inside the wp-content/themes folder.
See anatomy of a WordPress Theme
http://yoast.com/wordpress-theme-anatomy/
WordPress Theme Development
http://codex.wordpress.org/Theme_Development
Once your WP site is deployed on the server, you must use the WP Admin Panel to edit content & invoke changes to your Theme, Plugins, Widgets, etc...
See Working with WordPress
http://codex.wordpress.org/Working_with_WordPress
Nancy O. -
Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Hi
I am trying to setup a Power BI On Premise datasource at a client site.
I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears.
Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’
The servername which is returned in the error message is exactly the name which the DMG was installed on.
There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
Any assistance would be appreciated.HI
Thank You for the reply.
I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
When setting up the datasource you should be on the same domain as the datasource as per the below post.
http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
Regards, Drickus -
Getting below mentioned error while installing a package in the windows 2012 server remotely through psexec command
Error 1718. Windows Installer Service could not be accessed.
The same msi is getting installed local in through when we are doing through manually
Please help on the sameHi Rahulan,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
Just addition, please refer to following threads and check if can help you.
The Windows Installer Service could not be accessed.
error 1719 windows installer service could not be accessed ....
Hope this helps.
Best regards,
Justin Gu -
When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
When trying to sign in to the iTunes store I get the following message, "We could not complete your iTunes Store request. An unknown error occurred (5002). There was an error in the iTunes store. Please try again later." How do you resolve this? Has been going on for days now.
I started getting this message a couple of days ago.
Started a thread of my own before I saw your post. https://discussions.apple.com/thread/4660828 -
I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?
Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I'm running IE 9 & windows 7. I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.
There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Am from India. when i tried to turn on face time the error displayed is" Could not sign in. Check your network connection and try again". how can it be resolved?
If you are using someone else's WiFi they may have restrictions in place.
(cofee shop, etc..)
Have you tried connecting using at least more than one particular WiFi network ?
You might want to try googling for a bandwidth test site
verify you have reasonable throughput..
1 megabit up and 1 megabit down..
(bandwidthplace.com is what I typically use..) -
Cannot Create New Share from Azure PowerShell - The remote name could not be resolved
I have created a storage account. It seems that there isn't a specific way to create file storage rather than blob storage.
I followed the instruction for creating a share in Azure Power Shell but when I try $s=New-AzureStorageShare... I keep getting the error "The remote name could not be resolved". I checked the account name and it matched what is shown on the
Azure site.
I also cannot access the storage from the URL's. I get the message "This page can't be displayed.
How can I create a file storage account and a share to it?
Thanks,
GlenHi Glen,
Thanks for your post!
Did you sign up your File Service ?
To sign up, go to the Microsoft Azure Preview Portal, and sign up for the Microsoft Azure Files service using one or more of your subscriptions. As subscriptions
are approved for the Azure File preview, you will get an email notifying you of the approval. We will be slowly opening up the service to users in batches, so please be patient after signing up.
After sign up and enable this feature, I suggest you could refer to this blog for how to use Azure File service (
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx#faq7 ).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.Hi,
In addition, please make sure that the port 443 is not blocked by the firewall.
Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
placed in front of the Web Application Proxy server.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
How to set Password protection in excel using java
Dear all, I have no idea to write a java program that how to set password protection in excel. Please give me some solution using java tools. Thank a lot! Regards, kzyo
-
Production date to be entered for existing materials
Hi all, Is there any standard tcode/procedure for entering the Production date/SLED for the existing materials whose GR is already done.The client don't want to cancel the old GR and do a fresh entry.' Please do suggest me a better solution to the ab
-
Very Strange Internet Access Behavior After upgrade to systemd
Currently I'm having very strange issues with my wireless connection. Currently, if I connect using netcfg to a wireless access point, I have the following behavior: 1. chromium can connect to any website 2. thunderbird can send/receive emails
-
Help! Computer arbitrary shuts off since installing new iPod Nano!
I got an error message when I installed my new iPod nano (sadly I didn't think to write it down so now I don't know what it said) but ever since then my computer just shuts off. iTunes doesn't have to be open for it to happen... It's even shut off in
-
Before i spend hours of fruitless searching can someone please point me in the right direction? I have a laserjet lllp hooked up to a milan print server that uses the raw protocol over port 2000.. How would i go about setting this up?