Very Strange Internet Access Behavior After upgrade to systemd

Currently I'm having very strange issues with my wireless connection. Currently, if I connect using netcfg to a wireless access point, I have the following behavior:
  1. chromium can connect to any website
  2. thunderbird can send/receive emails
  3. curl, firefox and opera can connect to some https sites but not http (yes: https://www.facebook.com, https://bbs.archlinux.org, no: https://archlinux.org, https://github.com)
  4. wget does not connect, neither does pacman -Syu
after I upgraded to systemd, I was getting errors because of groups, so I removed extra groups. Here's what I have now:
There is currently no rc.conf in /etc
$ id ambantis
uid=1000(ambantis) gid=100(users) groups=100(users)
$ id root
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),19(log),1000(wheel)
If I try to remove the wheel group, then netcfg does not allow me to connect, neither can I connect manually with wpa_supplicant and dhcpcd
Here's the output of $ systemctrl
UNIT                                                                                        LOAD   ACTIVE SUB       JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount                                                           loaded active waiting       Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device                                        loaded active plugged       5 Series/3400 Series Chipset KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-eth0.device                                         loaded active plugged       82577LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb1-1\x2d1-1\x2d1.4-1\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged       /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device                                      loaded active plugged       5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlan0.device                           loaded active plugged       RTL8191SEvB Wireless LAN Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda7.device    loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device         loaded active plugged       ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device         loaded active plugged       HL-DT-ST_DVDRAM_GU40N
sys-devices-platform-serial8250-tty-ttyS1.device                                            loaded active plugged       /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device                                            loaded active plugged       /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device                                            loaded active plugged       /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-sound-card29.device                                      loaded active plugged       /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-fuse.device                                                                      loaded active plugged       /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device                                                 loaded active plugged       /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-eth0.device                                                       loaded active plugged       82577LM Gigabit Network Connection
sys-subsystem-net-devices-wlan0.device                                                      loaded active plugged       RTL8191SEvB Wireless LAN Controller
-.mount                                                                                     loaded active mounted       /
boot.mount                                                                                  loaded active mounted       /boot
dev-hugepages.mount                                                                         loaded active mounted       Huge Pages File System
dev-mqueue.mount                                                                            loaded active mounted       POSIX Message Queue File System
home.mount                                                                                  loaded active mounted       /home
run-user-1000-gvfs.mount                                                                    loaded active mounted       /run/user/1000/gvfs
sys-fs-fuse-connections.mount                                                               loaded active mounted       FUSE Control File System
sys-kernel-debug.mount                                                                      loaded active mounted       Debug File System
tmp.mount                                                                                   loaded active mounted       /tmp
cups.path                                                                                   loaded active running       CUPS Printer Service Spool
systemd-ask-password-console.path                                                           loaded active waiting       Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path                                                              loaded active waiting       Forward Password Requests to Wall Directory Watch
colord.service                                                                              loaded active running       Manage, Install and Generate Color Profiles
console-kit-log-system-start.service                                                        loaded active exited        Console System Startup Logging
cronie.service                                                                              loaded active running       Periodic Command Scheduler
cups.service                                                                                loaded active running       CUPS Printing Service
dbus.service                                                                                loaded active running       D-Bus System Message Bus
[email protected]                                                                          loaded active running       Getty on tty1
healthd.service                                                                             loaded active running       A daemon which can be used to alert you in the event of a hardware health monitoring alarm
netcfg.service                                                                              loaded active exited        Netcfg multi-profile daemon
ntpd.service                                                                                loaded active running       Network Time Service
polkit.service                                                                              loaded active running       Authorization Manager
slim.service                                                                                loaded active running       SLiM Simple Login Manager
sshd.service                                                                                loaded active running       OpenSSH Daemon
syslog-ng.service                                                                           loaded active running       System Logger Daemon
systemd-journald.service                                                                    loaded active running       Journal Service
systemd-logind.service                                                                      loaded active running       Login Service
systemd-modules-load.service                                                                loaded active exited        Load Kernel Modules
systemd-remount-fs.service                                                                  loaded active exited        Remount Root and Kernel File Systems
systemd-sysctl.service                                                                      loaded active exited        Apply Kernel Variables
systemd-tmpfiles-setup.service                                                              loaded active exited        Recreate Volatile Files and Directories
systemd-udev-trigger.service                                                                loaded active exited        udev Coldplug all Devices
systemd-udevd.service                                                                       loaded active running       udev Kernel Device Manager
systemd-user-sessions.service                                                               loaded active exited        Permit User Sessions
systemd-vconsole-setup.service                                                              loaded active exited        Setup Virtual Console
udisks2.service                                                                             loaded active running       Disk Manager
upower.service                                                                              loaded active running       Daemon for power management
cups.socket                                                                                 loaded active listening     CUPS Printing Service Sockets
dbus.socket                                                                                 loaded active running       D-Bus System Message Bus Socket
syslog.socket                                                                               loaded active running       Syslog Socket
systemd-initctl.socket                                                                      loaded active listening     /dev/initctl Compatibility Named Pipe
systemd-journald.socket                                                                     loaded active running       Journal Socket
systemd-shutdownd.socket                                                                    loaded active listening     Delayed Shutdown Socket
systemd-udevd-control.socket                                                                loaded active listening     udev Control Socket
systemd-udevd-kernel.socket                                                                 loaded active running       udev Kernel Socket
dev-sda5.swap                                                                               loaded active active        /dev/sda5
basic.target                                                                                loaded active active        Basic System
bluetooth.target                                                                            loaded active active        Bluetooth
cryptsetup.target                                                                           loaded active active        Encrypted Volumes
getty.target                                                                                loaded active active        Login Prompts
graphical.target                                                                            loaded active active        Graphical Interface
local-fs-pre.target                                                                         loaded active active        Local File Systems (Pre)
local-fs.target                                                                             loaded active active        Local File Systems
multi-user.target                                                                           loaded active active        Multi-User
network.target                                                                              loaded active active        Network
remote-fs.target                                                                            loaded active active        Remote File Systems
sockets.target                                                                              loaded active active        Sockets
sound.target                                                                                loaded active active        Sound Card
swap.target                                                                                 loaded active active        Swap
sysinit.target                                                                              loaded active active        System Initialization
syslog.target                                                                               loaded active active        Syslog
systemd-tmpfiles-clean.timer                                                                loaded active waiting       Daily Cleanup of Temporary Directories
LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
JOB    = Pending job for the unit.
85 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

UPDATE:
I've managed to make changes to the passwd file so that uuidd is in fact uuidd (instead of uuid). I've also gone through and restored the groups of postgres and tomcat. I'm still having the same behavior. After booting up, here are the new entries from /var/log/errors.log:
Nov 21 13:09:55 localhost /usr/sbin/crond[339]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Nov 21 13:16:17 localhost dhcpcd[803]: wlan0: sendmsg: Cannot assign requested address
Nov 21 13:30:27 localhost dhcpcd[814]: wlan0: sendmsg: Cannot assign requested address
Nov 21 13:34:28 localhost dhcpcd[1285]: wlan0: sendmsg: Cannot assign requested address
Also, here's debug info from netcfg:
[root@okosmos 1000]# NETCFG_DEBUG="yes" netcfg GroundWork
DEBUG: Loading profile GroundWork
DEBUG: Configuring interface wlan0
:: GroundWork up [ BUSY ] DEBUG: status reported to profile_up as:
DEBUG: Loading profile GroundWork
DEBUG: Configuring interface wlan0
DEBUG: wireless_up start_wpa wlan0 /run/network/wpa.wlan0/wpa.conf nl80211,wext
DEBUG: wireless_up scanning
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant scan
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant scan_results
DEBUG: wpa_find_essid "GroundWork"
DEBUG: wireless_up Configuration generated at /run/network/wpa.wlan0/wpa.conf
DEBUG: wireless_up wpa_reconfigure wlan0
DEBUG: wpa_cli -i wlan0 -p /run/wpa_supplicant reconfigure
DEBUG: wireless_up ifup
DEBUG: wireless_up wpa_check
DEBUG: Loading profile GroundWork
DEBUG: Configuring interface wlan0
DEBUG: ethernet_up bring_interface up wlan0
DEBUG: ethernet_up dhcpcd -qL -t 10 wlan0
DEBUG:
DEBUG: ethernet_up hostname okosmos
Finally, here is current output from id and systemctl
[root@okosmos ~]# id
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel),19(log)
[root@okosmos ~]# id root
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel),19(log)
[root@okosmos ~]# id ambantis
uid=1000(ambantis) gid=100(users) groups=100(users)
and $ systemctl
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 5 Series/3400 Series Chipset KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-eth0.device loaded active plugged 82577LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb1-1\x2d1-1\x2d1.4-1\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlan0.device loaded active plugged RTL8191SEvB Wireless LAN Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda7.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged ST9500420AS
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged HL-DT-ST_DVDRAM_GU40N
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-eth0.device loaded active plugged 82577LM Gigabit Network Connection
sys-subsystem-net-devices-wlan0.device loaded active plugged RTL8191SEvB Wireless LAN Controller
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
cups.path loaded active running CUPS Printer Service Spool
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
colord.service loaded active running Manage, Install and Generate Color Profiles
console-kit-log-system-start.service loaded active exited Console System Startup Logging
cronie.service loaded active running Periodic Command Scheduler
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
healthd.service loaded active running A daemon which can be used to alert you in the event of a hardware health monitoring alarm
netcfg.service loaded active exited Netcfg multi-profile daemon
ntpd.service loaded failed failed Network Time Service
polkit.service loaded active running Authorization Manager
slim.service loaded active running SLiM Simple Login Manager
sshd.service loaded active running OpenSSH Daemon
syslog-ng.service loaded active running System Logger Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
cups.socket loaded active listening CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
syslog.socket loaded active running Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded active active Syslog
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
85 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
The only error I see is with ntpd, and I believe it is because it can't access the internet connection.

Similar Messages

  • Very Strange Internet Problems

    I own a MacBook Pro 15.4 Inch that I purchased about a year and a half ago. I recently upgraded to Leopard and have all the latest updates. I am from the US, and when I am home my internet works fine. However, I am on travel to Seoul, South Korea right now and am having a very strange internet problem.
    As far as I can tell, the URLs that I type in to my browser are, sparodially, not translated correctly into the webpages that they are supposed to represent. This problem is probably effective 75% of the time, and the rest of the time my internet works roughly correctly. For instance, when I enter http://www.google.com, instead of being taken to the Google homepage, I am taking to the homepage of Jammin Beats DJ Service, an obscure website about a company in northern Pennsylvania. The actual URL of this website is http://www.jamminbeats.com, but when my internet is malfunctioning, 'jamminbeats' is for all intensive purposes replaced by 'google' (that is, it applies not only to the main page, but to sub pages, so "http://www.google.com/weddings" takes you to "http://www.jamminbeats.com/weddings" and etc). For most other webpages, one of two things happens. Either I am taken to the correct page but it is displayed without any images or frames (just the html text and links), or I am taken to a blank page with the header "Under Construction", which I assume is the default for a page that doesn't exist. This is why it seems as though the URLs are simply being interpretted erroneously.
    This problem occurs when connecting both to the wireless and the wired internet at my hotel, and it occurs on both Safari and Firefox, so it is not a connection-specific or browser-specific problem. It may be a problem with the hotel's internet, and as of yet I have not had a chance to test the computer at another location. However, a colleague using an IBM computer has had no problems, and I am currently on a Samsung machine in the business center of the hotel and it is working correctly as well. I have searched extensively online for a similar problem but have come up empty handed, and more than anything, I am confused about what might be causing this problem. The strangest thing is that a fraction of the time, the internet functions normally, but it is usually roughly 15 minutes out of every hour, and eventually I am inevitably taken back to Jammin Beats.
    I am a computer science graduate but I still have no idea what would cause this problem. At first I thought it might be a hacker, but if it is, he or she has been at it consistently for 3 days now, and only seems to be targeting my computer. Any ideas or solutions would be greatly appreciated, as I have been forced to resort to the hotel's business center for checking email, doing work, etc. Thanks in advance.

    I did consider that, as I was in Beijing last week and there are a number of censored sites. However, in Korea I have had problems with very basic sites like facebook, wall street journal, google, yahoo, Korean google, my hotel's webpage, etc. Further, I have successfully gotten all of these sites to load seemingly at random, and can access them without problems on other computers. The only disconnect seems to be between my MBP and the internet, not between Korean internet and the web. I have toyed around with the network settings, and although sometimes after switching from "Automatic" to a fixed connection I get some sites to work, it usually only lasts a short time and eventually the same sites stop working. I reset my cache regularly to make sure I'm not getting sent to cached sites, but this also doesn't help. Further, my Apple Mail, Skype and AIM accounts jump between being connected and disconnected randomly as well. Again, this is isolated to my own computer, which is why I'm so confused.

  • Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

    Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
    I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
    I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
    Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
    Thanks
    Mark

  • Very Limited Internet access - Download

    I am now a Full Creative Cloud member. Can I download the complete Master Collection Creative Cloud Suite package for easy install onto my computer? I have very limited internet where the work computer is. I can get broadband from another location and would like to fully download the package from there and then take to the work computer for install. Is this possible? Or is it possible to ask for the software on disc?

    G'day Mylenium,
    Cheers mate for the link, however this does not offer the 'most-up-to-date' versions of all the software on offer as a paid 'Cloud' member.
    Surely there is a way for Cloud members to download the most up to date paid software without restrictions for easy install onto a computer that does not have or very little internet access?
    My office computer is located in the country and the only internet available, and very on and off due to poor reception, is 3G mobile coverage. At $49 per month for only 3GBs, this is very expensive, so we use the internet sparingly.
    I do have access to a broadband else where to download content, but I am not allowed nor is it suitable to take along the WorkStation Rig to this broadband location to install downloaded software.
    I am happy to download the occasional update and to have the software do a monthly check in for licencing, but to have to download large files is just not possible.
    I must be missing something from Adobe, surely they have addressed this concern for others before?
    Cheers
    Michael

  • Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

  • [SOLVED]Can't print to my Brother DCP-7065dn after upgrade to systemd.

    Hi All,
    I have a pure systemd installation and I'm having issues printing. I have a Brother DCP-7065dn which works well on my Ubuntu laptop with the drivers availible from Brother. I downloaded and installed the drivers for this printer from the AUR and added the printer to cups (both lpd and usb). When I print a test page cups reports that the job completed succesfully but the printer does not print. Not sure what is wrong. Has anyone else had printing issues after upgrading to systemd? Any thought on how I can get this printer working?
    Thanks
    Edit: BTW. Brother offers deb and rpm packages for their Linux drivers. I installed the deb packages on an Ubuntu machine and I can print over the network (lpd) with no problems. I also installed the brother on may arch system using the wrong drivers just to see what would happen. Using the DCP-7045N Foomatic/Postscript driver I can communicate with the printer (progress) but printing a test page results in the printer spitting out a lot of blank pages. I can also print to an HP from my arch laptop with no problems. So the issue seems to be with the drivers for the Brother DCP-7065dn from the AUR. Not sure how I'm going to fix this. I can't install the rpm or deb packages on my machine. and I don't want to switch to a red-hat or debian system if I can avoid it.
    Final Edit: SOLVED! I need to learn to go back and read comments. In the AUR there was a comment regurding this exact issue. I needed to enable multilib repository and install lib32-glibc. Now it works. \(^_^)/
    Last edited by darthpenguin (2012-10-04 08:41:29)

    Matthew Poor wrote:
    The iMac spooled its print job, then replied "communication error". I repaired permissions, restarted everything, and same result.
    Did you add the printer using Bonjour or did you select one of the IP protocols? If the latter, then you cannot use IPP. The Canon MF driver supports LPD or HP Jetdirect.
    Matthew Poor wrote:
    Updated to Canon driver 10.2.0, printer is still not appearing in the list.
    If you mean that after you change the USE menu to "Select printer software" and the Printer Software window is empty, then try restarting your Mac. This can rebuild the printer list.
    Matthew Poor wrote:
    Both Canon MF background items are running according to Activity Monitor.
    The new MF v10.x driver does not install or use the MF Background process. So this process is a leftover from a previous driver. I would therefore recommend you trash the older driver files and run the v10.2.0 driver installer again.
    Depending on the version of driver you had installed prior to upgrading to Mavericks, the name of the folder can be different but will reside in /Library/Printers/Canon. Here you will see BJPrinter and IJScanner. Leave them alone and just remove the one or two that have MF in the name.
    You then need to navigate to /Library/Launch Agents/ and trash any Canon plist file. Then restart the Mac and run the Canon MF v10.2 installer again and then see if you can add the MF8350.

  • Strange Client Behavior after upgrading to 10g

    Hello Friends !!!!
    Here is my scenario:
    Oracle Database 10g 10.2.0.3
    Windows 2008 Server SP2
    After upgrading from oracle 9.2.0.1.0 and Windows 2003 Server I'm facing a strange behavior.
    Many times over the days some machines do not release some table resources even having their status "INACTIVE" and the wait event "SQL *Net message from client" and wait class "IDLE".
    Therefore, i got a lot of locked sessions, and users complaining..... until I kill them
    The client machine was as well switched to Oracle 10g client....
    Have you guys got any tips about this scenario?
    Tks for any advice.

    About the lock queue:
    1. blocking session has an exclusive table lock on VENDEDORES table; this is very rare in application because most of the time not needed: application code should try to avoid to take such kind of lock.
    2. blocked sessions request a row share table lock: it looks like that VENDEDORES table is a child table linked to some parent table with a foreign key constraint and that an index on the child table foreign key is missing (this kind of lock is requested if you DELETE from parent table or update parent table primary key).
    About the lock session: this is the blocking session that is waiting since 19 seconds on client: it is likely an application issue: you should try to investigate what the client (aservice.exe) is doing while holding an exclusive table lock.

  • After upgrade to 10.8.1, Internet access stops after approx. 50MB of traffic.

    I upgraded to Mountain Lion, and when I started upgrading OS components and other apps, downloads would stop after about 50MB. Once this happens, all requests in internet browsers also lost internet access. If I turn Airport off and then on again, I can access the internet but the same problem occurs again once I continue other downloads.
    I have other computers and they don't suffer from this problem, so I know if is not my internet provider or my wireless network.
    Any ideas?

    Me too! I'm also getting display problems in emails where scrambled graphics are overlaid interactive parts of emails like dates telephone numbers!

  • Problem accessing iPhoto after Upgrade to Yosemite

    After upgrading to Yosemite on my MacBook , the result I get when trying to open iPhoto, which I use a lot , is : our photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
    What does "not readable by previous versions of iPhoto after the upgrade " ? Am I not going to access my photos ?

    Thank you Niel but I just found out that my back up to my Passport for Mac is not the same as before and am having problems with it .
    I go to settings, select time machine , turn it on and it starts  backing up .
    Now it is asking me to choose between My passport for Mac and Other airport time capsule .
    When I choose My passport for Mac , it gives me the  choice  : REMOVE DISK or Cancel .
    If I choose the other one , it gives me the choice : SET UP or cancel .
    I don't know what Other airport time capsule is and not sure if I have to set it up .

  • Strange WiFi reception indications after upgrade to 3.0

    After upgrading to 3.0 my WiFi will work wonderfully for maybe five or then minutes and then begin to lose the signal. Or, at least the strength indicator shows a loss of about half the strength. At the same time, the battery indicator will show about one eighth low and then show full while the WiFi signal strength goes low. This happened today several times in a row, at about ten minute intervals, while sitting on my living room sofa which is about 25 ft. and two interior walls from my wireless router. Before the upgrade, I could receive the signal without any variation for more than an hour.
    If I am sitting in my den, about 15 ft. and one interior wall from the wireless router the signal strength stays at full power indication and the battery level indication remains normal.
    This is very strange, has anyone else experienced the same problem?

    A lot of us have. I fixed mine pretty fast but I can of stumbled onto the solution while trying a few more things. Given you seem to be having a battery issue as well, I'd work though the following steps:
    1. Reset your iPod (that's for the battery part of this only)
    2. Tap Settings > WiFi > the blue > next to your network name > tap Forget this Network
    3. Tap Settings > General > Reset > Reset network settings
    4. Turn off your router, wait a few seconds and turn it back on.
    5. After your iPod has restarted, Tap Settings > WiFi > Other network and enter your network name, security settings, and your password.
    That should return it to normal operation. If it does not, there are a few more tricks to try. Let us know what happens.

  • WiFi Internet connectivity problems after upgrade to 10.8.4

    After upgrading to MacOS 10.8.4 I am facing regular interruptions to my WiFi internet connectivity. Periodically the internet connectivity is lost and the only way to fix the problem is to turn WiFi off and on again. This happens frequently when I am downloading files at using big bandwidth (more than 1.5-2 MB/s). If I use assist me on the Network preferences tab, it displays an ISP error when the connectivity is down, however I am certain that I do nota have any kind of ISP or router issue since at the same time I have WiFi internet connectivity from my iPad mini, iPhone 4S and Samsung Galaxy S3. Therefore it should be a 10.8.4 issue

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • Very slow internet access..... - interesting issue !

    I have 3 computers at home: PC XP, PC Vista and a new imac 24'' since 4 weeks....
    As side comment I'm disappointed in Apple... I expected much more… more issues than Vista seems….
    10.4.11 + Safari 3.0.4 + Firefox.
    Internet on my Mac is very slow. On the same network (wireless with WEP 128) when I enter a new page on my PC and Mac at the same time it take to the Mac approx 5 time more time to display (safari or firefox)…
    On safari I have empty the cash and “reset safari”…still the same….its dam slow for Internet access. I also removed the Wireless encryption but still the same….
    Does somebody have a clue what it could be?

    The DNS is coming from the dsl provider. Very often your router simply gets the dns automatically. With Leopard, I suspect some of the settings are such that things time out before the dns gets through. What I did was look up what the actual IP number of the dsl providers dns was. I added the IP number of the dns provider to my router. So far that seems to have solved my WiFi delays with Leopard (although that could just be a co-incidence).
    Exactly how you add the IP number to a router is router dependent. Mine is a netgear, and you do it through a web page link to the router's IP number (which will be listed in the manufacturer's handbook). Generally something like 192.168.0.1
    Hope that helps.

  • Very strange FF3/Opera behavior

    Hi there,
    I'm running XFCE & Compiz Fusion and encountered a very strange behavior when visiting a certain website with Firefox3. The website is http://www.cyberpunk-terminal.de/. Whenever I visit that site my whole Firefox gets transparent. When I switch to a different tab or close the tab, it's back to normal. It seems to have something to do with Compiz, since I can set the transparency of FF to 0 via Compiz-shortcuts.
    Does anybody else have the same experience?
    Edit: Same thing happens with Opera.
    Last edited by Pavel Jackoff (2008-08-06 20:31:36)

    Something new just happen. I have a big X in the battery icon.
    "No batteries available"

  • My mac book Can't acces internet with iphone after upgrad to maverisk

    Hey Everyone,
    I just got issue with my Macbook Pro retina display with internet connection after upgrad from Mountain Lion to Maverisk,
    before update to Maverisk I can fine to connect internet with iphone4s via Blootuse or USB cable but after upgrad to maverisk I can connect but internet can't recieve or send data, so if who got same issue like me and already solved please kindly to share experien to me how to solve this case, Apple could you help me?
    Thanks every one  

    Hi DinhRatana,
    If you are having issues with the Personal Hotspot function of your iPhone, you may find the troubleshooting steps in the following article helpful:
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/ts2756
    Regards,
    - Brenden

  • Cannot connect to internet with Huawei after upgrade from 10.7.4 to 10.7.5

    I have an iMac which came with os X 10.7.4.When I installed my Huawei E303 data card, I was able toconnect to the internet.
    After upgrading to 10.7.5 the system appears toconnect and I can text, but there is nointernet connectivity.
    Thanks for any advice

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

Maybe you are looking for