The User Experience

Has anyone seen documentation that describes Portable Directories from the users' perspective please?
All the Apple material I've seen, and the Visual Quickpro Guide, deal with them from the network administrator's viewpoint. I would like to be able to provide users of these accounts with material that describes the process from their end.
For example: what's going on during synchronisation? when to/not to synchronise.
Thanks in advance.
Brian Bowell.

Some screenshots of what the feature will look like to end users are available on this page. Synchronization updates part or all of the copy of the home folder on the network so that it is the same as on the client; it should be done before you move from one computer to another, and performing a sync should also be done when you've just finished creating an important document, as it provides some protection in case the document is accidentally lost from one place.
(14994)

Similar Messages

Why the user experience on Bluetooth keyboard of iPad is different on keyboard of MacBook, especially when typing Chinese characters?

I am a Chinese in Taiwan, and I use a input method call "Changjei" (倉頡) to input chinese character. And thank for "Yahoo Kimo Input Method" found in Macbook Pro, so that I can use this method as same as typing in Windows PC. When I use bluetooth keyboard connect to iPad mini, it has "Changjei" input method also, but the user experience is different than typing in MacBook Pro! I often type the wrong word when typing in iPad, because some words need additional space key to avoid selection ( when selection appear usually need additional number key for selection ). Usually every chinese character only need one space key for confirm, and in iPad, some Chinese characters need two space key(this will cause problem), and others need one as usual. It slow me down greatly, and is not a smoothly and freely experience when expressing my idea by typing in iPad, and I often distract by these misleading situation when typing.

FFor Apple to see your comments, you need to repost it at
http://www.apple.com/feedback

What's the difference in the user experience of ion3, wmii and dwm.

I want to try something new, especially some new concepts, not just another wm, nor I actually 'need' something - in the moment xfce just works for me. Of course, I have thoroughly read the (available) documentation of these WMs and tested a session, but they are all too different and I feel I need some shared experience in order to decide in which one to invest more time. I would like to ask people that have wider experience to spot some strong or weak points of each WM - but in no way it should be like 'this one is better' or sth. - especially ones that are not instantly obvious - from the descriptions on the home site or limited testing,
For example - wmii talk 9P, and this sound really cool, but I have no damn idea how this could be actually useful. Dwm is extremely minimalist, and I am not sure if it is not too minimalist to be practical.
Again, I don't need advice like what Wm to choose (which is essentially a stupid question), but just mentioning peculiar spots of each one, especially not instantly obvious ones.
Thank you in advance.
P.S. If there is already a topic, that is close to that, I'll appreciate provided link - my search found just general WM topics, as well as topics for specific WM, which was useful, but not completely enough.
P.P.S. If someone thinks ratpoison is unfairly ignored, one may provide its advantages, although I just somehow do not like it (nothing reasanoble)

The three (and I'll throw in Ratpoison because I love it) seem to have distinct approaches to the way you're expected to use windows.
DWM expects you to have one main window focused and a few others that you do want to see, but don't need to have focused at full size. The way it puts them along the edge is pretty nice on a widescreen monitor. Virtual desktops are provided since it would be a pain to cycle all the way through your window list whenever you wanted to change.
wmii seems (I only played with it a little) to be based largely on columns. This is very similar to Plan 9's editor Acme. Heck, when I first saw the screen shot on the wmii page I thought I was looking at Acme. You divide the screen into (usually two) columns and can arrange your windows within those as you choose. It's a fairly nice approach, marrying the simplicity of DWM's "main window" concept with the flexibility of other managers by having only a couple of "places" for windows (the columns), but multiple windows in each, whose exact positioning doesn't matter much. Tags are substituted for conventional workspaces. I haven't played with this feature.
Ion3 (which I used for a while) is based on the idea that you will divide the screen into just a couple of panes, and group your windows into those. Most of your windows will be invisible at any given time, but you can get to them all easily with the tab strip at the top of each pane, showing its associated windows. In this WM each window is in a definite place, unlike in Ratpoison, in which hidden windows are just hidden, and associated with no pane in particular. Ion also assumes that you will have some programs that don't play nice with a tiled manager, and allows the creation of virtual desktops that contain floating windows. Virtual desktops in this WM are pretty much the same as those in your standard floating WM.
The key to "getting" Ratpoison (which I have used a lot, and am using now) is that unlike the other three, you're not expected to have a complex layout of screen panes. Although you could create something of arbitrary complexity using the vertical and horizontal spit commands, it would quickly become a nightmare to work with, and there is no easy way to switch between layouts because, while you can save and load them, windows are not associated with particular panes on the screen, and will end up who-knows where. Instead, a Ratpoison user wants to switch between windows by hitting ^T (remappable, I use my Windows key) and then the number that was assigned when each window was created. As you may notice, this is how screen works as well. You quickly learn to remember these numbers, just like a screen user or Nethack player. 90% of the time I work with only one window on the screen switching between it and my alternate window, and the other 9% of the time I have two windows (mostly when I want to drag and drop things, but sometimes for reference material). 1% of the time I might hit three or [gasp!] four.
While the other three WMs seek to make it easier to manage your on screen windows, Ratpoison takes the approach that you probably don't need to have more than a couple of windows on screen at one time. Based on this logic, Ratpoison doesn't provide virtual desktops. If your windows aren't on screen, why do you need more virtual screens for them not to be on? Ratpoison does provide window groups, which serve a similar function. Unlike virtual desktops, switching groups does not change what's on your screen; it only changes the list of windows you are working with. This may sound like a pain, but keep in mind that you, as a Ratpoison user, probably have fewer than two panes on your screen. It's not hard to switch both of those to something else, and half the time you only want to change one of them (e.g. drag and drop between window groups). Ratpoison also supports multiple screens, which are treated much like panes on a single screen, except of course you can not delete them (senseless) or move windows between them (X11 limitation; not Ratpoison specific).
Another nice Ratpoison feature is that you can tell it not to manage certain windows, and you can tell it to leave some padding between windows and the edge of the screen. So I can run an unmanaged Rox sidebar to hold try icons, status monitors, a trash can, and volume control, and reserve that space for it with some padding. I can also remove that padding or change its size if I want to cover the sidebar.
Last edited by pauldonnelly (2007-04-22 19:52:16)

Leopard iCal (v3.0) takes away functionality and ruins the user experience

Why oh why did Apple DESTROY the usability of iCal present in Tiger with the horrid changes they made to iCal in Leopard? Please, Apple, put it back the way it was.
In Tiger iCal, if I highlight an event, the sidebar pops up intelligently ready for me to enter times, repeats, alarms, notes, or invitees. It was even smart enough to put it to the side with the most screen space.
In Leopard iCal, Apple has taken all that intelligent functionality away and burdened users with way too many unnecessary mouse clicks before en event can be entered or edited.
Now, with "new and improved (NOT)" Leopard iCal 3.0, if I want to add an event in the monthly calendar, I double click on the day, but instead of the sidebar opening all by itself, I must now do another double click on the event itself and yet another click on the EDIT button, all before I can actually enter an event in the real world.
Oh, sure, I can type the name of my event after the first double click, but that's useless for any events with times, invitees, alarms, or notes.
Again, what were the people at Apple thinking? Do any of them actually use iCal?
I check the iCal help and there was something about clicking a button in the lower right hand corner of the iCal window to quicking edit an event, but there is no such button there, only the push pin for to-dos. CMD-I will bring up the event window, but it still requires a mouse click on enter edit mode.
If you agree with me and want iCal back the way it was, please submit iCal feedback to Apple and tell them they got it wrong in Leopard iCal 3.0.

Lot's of folks agree with you.
The following post was very active for a while - 4300 views, 66 post until it was locked without explanation.
http://discussions.apple.com/thread.jspa?threadID=1201297&tstart=675
I keep thinking, maybe I'll just get used to the changes and still, every single day the use of this core application is a source of constant frustration. I keep blindly hoping that the iCal team will listen to user feedback and examine the usability of this app.
And for the record, it's never been about the info drawer - it's about overall usability and restoring such basic items as one click editing of content on the calendar, being able to have a usable / expandable long event descriptions and being able to edit with one click vs. three.
For just one instance of how they broke this, just try creating a text entry of 200 characters or more in the "notes" field and then see what happens if you add more text. Unlike this web form which automatically keeps scrolling so you can keep typing....it stops and you have to manually scroll from short line to short line. It's just unbelievable - as if they didn't QA the basic functionality with a single user that does anything beyond the most limited use of the app.

Need Adobe Flex User Experience Designers & Developers - SF BAY AREA

The User Experience Designer will provide the necessary services requested by Business Partners for critical initiatives such as the National Agreement Implementation, Employee Portal Framework, KP Intranet and Clinical Library. You will also provide services as requested to additional clients including projects such as web sites, Flex applications and application support. This position will be based in Pleasanton, CA and will require travel to Oakland and other locations for projects, development and meetings.
Essential Functions:
Design, code, test, deploy, and maintain intranet sites and applications, working both independently and in team settings.
Develop CSS standards and strategy across the intranet environment, encompassing portal framework.
Scope new project work and create detailed project cost estimates, plans, and schedules.
Assist staff in web site maintenance, design and development for existing sites and applications.
Incorporate RIA elements when prudent.
Design within existing brand standards, and test for cross-browser compatibility.
Use knowledge of Section 508 accessibility compliance when applicable.
Work with developers to integrate front-end code with back-end functionality, while maintaining code compliance and consistency.
Help developers and development teams troubleshoot and fix UI problems.
Develop resolutions, recommend solutions and build action plans as needed.
Can independently perform, guide, assist or mentor others in web development and maintenance using industry best practices and specific internal procedures and standards in all phases of development, implementation, and post-implementation.
Minimum Technical Skills Required:
4 years experience Adobe Dreamweaver (CS4)
4 years experience HTML/XHTML and CSS
4 years experience Adobe Photoshop and Illustrator (CS4)
1 year experience with JavaScript, AJAX, DOJO and SPRY
3 years experience with Microsoft OS
Skilled in Microsoft Office Productivity Tools
Basic Qualifications:
Bachelor's degree in Computer Science or equivalent skills and experience.
5 years relevant work experience with solid hands-on experience in design and build activities.
5 years experience in estimating, planning and coordinating multiple projects.
Experience delivering on enterprise level projects in large companies; familiar with a variety of back-end middleware and endpoint tools.
Exhibits excellent attention to detail and diligently follows through to resolve issues.
Consistently demonstrates flexibility, organization and prioritization of tasks.
Experience working collaboratively with non-technical users.
Good communication skills both verbal and written form.
Ability to work independently with minimal guidance and as a member of a team.
Knowledge and understanding of Intranet, Web development best practices, usability and current code standards.
Preferred Qualifications:
Experience with Adobe Flex, IBM WebSphere, RAD 6 or 7, Adobe Flash and/or RIA
Experience with TeamSite Content Management
Experience with Web Standards and usability testing
***CANDIDATES SHOULD BE LOCAL TO THE SF BAY AREA*** Please contact me here or call 925.924.6359.

people complaining about problems installing an office over another office are (dare i say it) stupid. it makes absolutely no sense installing one over the trial version. just uninstall the trial and you'll be fine. every single time.
as for problem with uninstalling mcafee (or any other antivirus, for that matter, just download the uninstaller from the software company e.g. http://service.mcafee.com/FAQDocument.aspx?id=TS100507 for mcafee.
that said i believe you get to choose if you want mcafee and/or office when you go through the inital boot, the "on-screen instructions"
you can slow down the odd via power manager
and thanks for the tips on changing the reg to have the user profiles somewhere else!
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Just a 808 PureView user experience question

Hi there,
When the 808 asks for SIM pin code, the whole screen is nicely used for this process.
Now, when the answer then comes, e.g. after a successful pin entry, the response text is something very tiny showed quickly on the left top corner of the phone.
You got the whole screen in use for the pin request, so why wouldnt you show e.g. the successful pin entry message after that with big letters in the middle of the screen?
This just is an example how annoyingly the user experience is varying and is not thought in beforehand.
This is my honest opinion and i think I am eglible to mention it as I had paid for so many hundreds of euros for the device.
Also the phone now and then hangs without any visible reason, goes totally unresponsive and the battery must be removed.
The phone is up-to-date patched, so this is not due to an earlier firmware or something.
Yeah I know I have guarantee, so I will return it if this continues, but the user experience thingy will not be fixed by the phone repair shop.
Check what I mean here: http://youtu.be/kObyujPKyw0
Cheers,
Almrod Faelrvin

In your case, you will need to take your phone to your local Nokia Care point for them to inspect.
to locate your nearest Nokia Care: http://nokia.com/support

User experience improve for MS word/ppt file

Hi,
When I open MS word or ppt file, the applet looks refresh the content page by page, the user experience is not so fluent, is there any method to change this mode?

Hi James,
Unfortunately not currently. AutoVue loads the documents page by page. For example, when loading a PowerPoint document, the AutoVue server reads the first page and sends the graphical information to the client for rendering. Page 2 is only read when the user selects the next page.

Poor user experience after WAAS Installation

Hi,
I have got the the network setup as follows:
Branch:Users are connected to a Cisco 3750 switch with single vlan and have a single gateway router with two wan links.
            WAE appliance is connected to the same vlan with the users and the intercept/return method is WCCP gre.
Datacenter: Each of the WAN Links are connected to two separate cisco 7600 routers at the datacenter. and the servers are behind these routers.
                  The WAE appliance is connected to the two 7600s and generic gre is used for interception/return between the WAAS appliance and the
                  Cisco 7600.
After Inserting WAAS in path of the User traffic, i get all the nice compression details on the CM indicating that the WAAS workss fine but the user experience is even worse. I have also ensured that no link in the path is on Half duplex, what else could be causing a degrade of the perfrmance.
Please find attached configs template for the devices in this setup.

Hi,
We had the same issue for one of our site, that was speed problem.
The WAE was in 100/full the 3com switch was in 100/full.
After change it to auto/auto in WAE and switch everything was ok.
Have seen this wiki?
http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later
Jan

IPhone 3g Vodafone India users experience?

Hey Guys,
I am in India and am planning to buy the iPhone 3g through Vodafone. I wanted to know what the experience of users have been in India (Bangalore) in terms of service, reception and issues. This forum is pretty helpful in getting all the information in terms of drawbacks, issues etc as far as the phone is concerned, but atleast in countries like US you have the Genius bar etc where you can go with your issues. Whats the service like in India. It would be great if any user using it gives the feedback with the actual problems faced rather than generic statements (No offence meant). Its around 30,000 INR so need to check on that. I know of all the drawbacks, so no need mentioning that, just the user experience in India.
Cheers!

Sorry folks, I was not aware of caps issue. again I am posting my problem.
I purchased the iphone from vodafone india (serail no. 84831yj7y7h). My iphone is giving me problem since the time I purchased it. It’s ringer gets off on its own and sometime network fails and it hangs. Home button responds very late. Earlier the problem was not so frequent but since last year and a half the frequency of this problem increased. I have become a laughing stock with my friends and family.
Every possible solution was tried by vodafone but of no help. As earlier Apple had arrangement with Vodafone for service in india.
Now, as Apple have started giving service to iphone in India, I approached Apple they asked me to pay Rs10,700/- for replacement of a defective piece, which is exorbitant because apple has launched iphone 3G in india for Rs19000/-. I would have agreed to pay the amount if they were to replace with iphone 4.
I am a patron of apple owning macbook, ipad2, ipod.
I feel cheated first being delivered with a defected piece,then being asked for such exorbitant amount for replacement.
I have called the customer care and vodafone but no one hasany answer. I have lost hope. Now i have no choice but to sell it insecond hand market and by some other brand handset.
No one listening what to do.

Create Email/Submit button that asks the user what email address to submit to

Is it possible to have an Email/Submit button that will ask for the users to imput the email address in which to submit to?

My own opinion is that you are going to tick off more people than you realize. I think you can handle this in one of a few better ways:
1) Institute an interface/web service where the HR system can send you people that are terminated. If the person has sensitive company data or anything on your site it would be in their best interest to remove their access.
2) Force password resets every x days. To reset a password, your page can send the link to their email. That way they have to establish they still work there to reset it.
3) Along the lines of #2, just make them verify their account every x days. If they don't do it within a week timespan, lock their account until they can prove they work there.
I mean unless you're dealing with top secret information, if someone gets a few extra days of your service its not a big deal. You have to balance the user experience with the reality that someone may get your service for free for a bit.
I can still get into My Oracle Support with my old email address. I obviously would not dare to put in a ticket, but I can view bug notes, knowledge base..etc. So it happens.

Nokia E6-00 User Experience and Development needed...

My Mobile Details:
Device Info:
Model E6-00
Product RM-609
OS : S60 5.1 (Symbian ^3)
Symbian Symbian^3
Firmware 021.014
OS 5.2 ; QT 4.7.3 ; QT Mobility 1.0.2
Messaging : (SMS)
* You cannot save the sortby settings . Only for the instance view you can sort the message by date,sender. once you go out of the inbox and come back again , by default its sorted only by date
Profiles :
* Themes settings are not included in profile. You cannot have unique themes for each profile. Themes settings applied to the phone. So the feature we had in ordinary nokia basic phones where , if we change our user profile , the theme which we selected for the particular profile will be applied is not available in this high end business phone. Need Development
Music (Music Player):
* You cannot set the customer equaliser, only 5 preset are available bass booster, classical , jazz, pop, rock, default preset.
* In playlist sorting feature is not available. Moving the songs becomes difficult by using move by option. if there is drag & move feature , it will be good.
* You cannot move to the Next song on the go. You need to open your phone , use widgets to skip the song. If the mobile volume control (up/down key) long press helps us to move next song it will be good. Need modification in the firmware.
Videos :
* Moving to the Next video is not possible with the video player, only fast forward works. Next option is not available. You need to go back and select next song
Mails :
* Only 250 mails you can store on your inbox , Size limitations matters
Taskmanger:
* Task Manager application , is not available . To look at your phone memory utilization , Network bandwidth, RAM Memory etc...
About (i) under phone management :
* It doesn't even shows your mobile model , IMEI no , IMSI etc... Memory used Phone memory, mass storage, Memory card memory status. It Gives only Info about Nokia Corporation , Which is of No use.
I Hope this features will be included in next software update. As its the New Version of Anna OS. Waiting for someone to look at this post and reply.
Any additional info needed , feel free to contact me.
Thanks & Regards,
Raja Gopalan S
Community Manager's note:
Corporate identity details removed,

I'm generally disappointed with the user experience and functionality offered by Symbian Anna on the E6 too. It's ok but nothing to shout about at all, especially considering that it is supposed to be the current pinnacle of Nokia's offerings in the smartphone market.
The last Symbian/S60 phone I had was the Nokia 3230 about six years ago and apart from the very obvious cosmetic changes as far as I can tell there have been few other leaps forward.
This perception can often be down to the little things, the numerous little functions, user choices and options that an operating system could have.
Silly things like I can't choose which folder the camera saves pictures to. My two year old 6700C running Series 40 lets you do that, Anna doesn't. Come on catch up!
Oh and when you enter the directory in which images are saved, Series 40 gives you a little thumbnail preview in the listing. That's a bit too much for Anna.
The Anna media player doesn't even equal the functionality of that on the 6700C. Some might say the E6 isn't a "music" phone but then neither was the 6700C and it's two years old now. Come on Anna, catch up again!
Anna will not let you directly access the folder in which the stock ringtones are located. So you can't delete the unwated ones or add new ones to it to keep them all in one place. Guess what? Series 40 on the old 6700C lets you do that.
... and don't even get me started on the disorganised unintuitive mess of the photo viewer application.
I'm now thinking that Anna is just a cosmetic facelift to Symbian to bridge the gap between now and when the Windows 7 Mobile devices are released. In places, Anna doesn't even compare well against Nokia's own feature phone OS.

Change user experience on the fly

I was curious is anyone has coded anything to allow a user to change his experience on the fly? In other words...I log and get my assigned experience. I then get a service call from a user who has a different experience (which provides a different navigation, different, etc..). The portal only has 2 experieneces. I would like to be able to have the person receiving the call click a link/button and get the other experience until they click it to change back.
*We can not provide another user account for the support person to log in as or to use the callers account info as this is against current policy.

Interesting concept. I coded up a quick group membership adder yesterday. Created a new group that is in the target experience, set that experience to higher on the list than the standard employ exp. Seems to work well ( though get a 'cant reach remote server' message in dev LOL ) for group addition, need to test whether the exp actually catches. A portlet on the homepages, only visible to employees allows you to toggle.

Improved user experience transferring from APF to webDAV volume

We've all experienced how files that we drag from our Desktops and drop on folders on the same volume are "received" at their destination and "lost" at their origin. They move.
Users in my organization desire a similar experience when dragging files from their Desktops to folders NOT on the same volume, particularly remote volumes; or ones mounted using a different protocol, like http (webDAV to be exact)--whether on same volume or not. They prefer not having to dispose of needlessly remnant files on their Desktops.
I'm responsible for providing a solution that delivers this experience. I suspect this will require an Applescript.
I have written one that is basically functional. It calls a handler within a folder action to delete files still selected after copying of them to the attached folder completes.
I include my script below. My interest in posting here is twofold.
First: maybe someone can help me make this script work better. I'm still learning, and I haven't gotten it to handle important cases properly.
Second: I wonder whether this has not already been done. I've looked at MacScripter, Applescriptsource, Apple Discussions, and certain individual scripters' sites; but keywords I've come up with haven't gotten me results.
In advance and for any assistance, thanks!
Here is my script. I know it fails if I get an overwrite dialog as a copy operation begins.
If in the Finder, deselection occurs or selection is changed as script runs, no files or wrong files get deleted. I've also had the script delete a file that never got copied to its destination when a permissions dialog came up.
I'd rather no one actually run this script. Just examine it.
The script gets attached to a webDAV site's icon that appears on the Desktop once connection is made. This seems to work like a folder; hence my use of folder actions.
That icon goes away if I disconnect, but I would need the script to work every time connection is made. There are probably other issues.
on adding folder items to this_folder after receiving these_items
call()
end adding folder items to
on call()
tell application "Finder"
activate
set fileList to selection
repeat with theFile in fileList
delete theFile
end repeat
end tell
end call

This OS behavior is there for a reason.
Good question. Thanks for noticing my post at all much less thinking critically on the subject.
webDAV site is to hold users' working folders. In our case, there will be a lot of dragging from Home folders (including Desktop) to webDAV.
The experience will naturally be compared with that of dragging files to the usual place for working files: a local AFP volume. Since drags to webDAV are going to fail by comparison on speed, I'd like to deliver comparability of the "move" experience.
What if your users want to copy (not move) an item to
a network volume?
As for dragging to other volumes, only the webDAV site would have the folder action. I should have made it clear: I'm talking about getting this functionality only in the case of users accessing their webDAV-hosted working folders.
I can understand readers thinking my aim was to change OS behavior. My fault, the vagueness on this point.
Anyway, Cyclosaurus, don't get me wrong. It relieves me know about the command-drag feature--that's great!

Report to show Service Requests that are open on a day selected by the user

Dunno if I'm being thick, but I can't see how to do this in a report/dashboard...
The user selects a day and the report pulls back all the Service Requests that were open on that day using the following logic...
Service Request Opened Date <= Selected date & Service Request Closed Date >= Selected date
Is this possible?

You can do this with a report or a dashboard.
For a report, create a report your subject ares, like Service Request. In Step 3, Create a prompt on your date and choose Column Filter Prompt. Give the prompt a caption ("Enter/Choose Date" for example). Choose the date field for the Filter on Column. Determine how you want the users to select the value and hit OK. My experience has been that you need to let users type in the date, as opposed to choosing from a drop-down list, because of the volume of data and performance reasons, but test it to determine what works best for your needs.
For a dashboard, you would need to create a dashboard prompt for your dashboard report. You do this by creating a new report on your intended subject area, i.e. Service Request. Instead of creating the report as you normally do, you need to click on the Create Dashboard Prompt button at the top left, just below the Oracle logo. Choose the right reporting area, then complete the prompt details. Don't forget to allow for the prompt in your report.
I always recommend that you consider purchasing a great book on reporting, written by Mike Lairson. It is an excellent resource for nearly all of your reporting questions. You can find it on amazon.com.
http://www.amazon.com/Oracle-Demand-Reporting-Osborne-ORACLE/dp/0071593047/ref=sr_1_1?ie=UTF8&s=books&qid=1274893170&sr=8-1
Good Luck,
Thom

How to include the user as a recipient of the email generated when a smart card certificate is issued by an Enrollment Agent on behalf of a user.

How can I add the requester name in the To: field of the email generated when a Smart Card certificate is issued on his behalf.
I want to address the possibility of someone (Enrollment Agent) issuing a Smart Card certificate on behalf of a user, assign a PIN and use it without the user's knowledge.
There doesn't seem to be a way in the registry to define a variable to be used in a manner similar to the TitleArg & TitleFormat way of using %1.
Jamal Saket OSFI Canada

Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The User Experience

Similar Messages

Maybe you are looking for