The vcenter server is unable to decrypt passwords stored in the customization

All,
I am still getting this error when trying to run this:
   New-OSCustomizationSpec -OSCustomizationSpec $custspec -Name $vmname -type NonPersistent | Out-Null
   Set-OSCustomizationSpec -OSCustomizationSpec $vmname -AdminPassword $adminpass -DomainUsername $username -DomainPassword $pass -Confirm:$false | Out-Null
   Get-OSCustomizationSpec $vmname | Get-OSCustomizationNicMapping | Set-OSCustomizationNicMapping -IpMode UseStaticIp -IpAddress $ipaddr -SubnetMask $subnet -DefaultGateway $gateway -Dns $pdns,$sdns | Out-Null
   $OsCustomization = Get-OSCustomizationSpec $vmname
Did anyone in the forums ever determine what the issue is with version 5.5???

I assume you tried this one already The vCenter Server is unable to decrypt passwords stored in the customization specification.The vCenter Server is unable to decrypt passwords stored in the customization specification.

Similar Messages

BEA-149505 -The administration server was unable to establish JMX Connect.

hello
Getting the following error, trying to access the weblogic admin server ( Linux x86-64 RHL50) after a fresh install.
BEA-149505 The administration server was unable to establish JMX Connectivity with the managedServer at the JMX Service URL of <none > URL in the AdminServer LogiI
1. what steps and configuration files do I need to access to add the url
I will like to add that the node manager and the cluster screen were NOT configured during the configuration, since this is NOT an OIM configuration
2. if you have any tips please let me know
r.

faisal
thank for your feedback. I added this in my startup script, but I was NOT able to get the web access to work and when I shot it down, there was an error.
Here is the startup script, Please show me when to place the scripts
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
stopAll()
# We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if [ "X${ALREADY_STOPPED}" != "X" ] ; then
exit
fi
# STOP DERBY (only if we started it)
if [ "${DERBY_FLAG}" = "true" ] ; then
echo "Stopping Derby server..."
${WL_HOME}/common/derby/bin/stopNetworkServer.sh >"${DOMAIN_HOME}/derbyShutdown.log" 2>&1
echo "Derby server stopped."
fi
ALREADY_STOPPED="true"
# --- End Functions ---
# This script is used to start WebLogic Server for this domain.
# To create your own start script for your domain, you can initialize the
# environment by calling @USERDOMAINHOME/setDomainEnv.
# setDomainEnv initializes or calls commEnv to initialize the following variables:
# BEA_HOME - The BEA home directory of your WebLogic installation.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# PATH - JDK and WebLogic directories are added to system path.
# WEBLOGIC_CLASSPATH
# - Classpath needed to start WebLogic Server.
# PATCH_CLASSPATH - Classpath used for patches
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
"/erasdevapp/weblogic/user_projects/domains/base_domain/bin/startWebLogic
umask 037
# Call setDomainEnv here.
DOMAIN_HOME="/erasdevapp/weblogic/user_projects/domains/base_domain"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"
SAVE_CLASSPATH="${CLASSPATH}"
# Start Derby
DERBY_DEBUG_LEVEL="0"
if [ "${DERBY_FLAG}" = "true" ] ; then
${WL_HOME}/common/derby/bin/startNetworkServer.sh >"${DOMAIN_HOME}/derby.log" 2>&1
fi
JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"
SAVE_JAVA_OPTIONS=""
CLASSPATH="${SAVE_CLASSPATH}"
SAVE_CLASSPATH=""
trap 'stopAll' 1 2 3 15
if [ "${PRODUCTION_MODE}" = "true" ] ; then
WLS_DISPLAY_MODE="Production"
WLS_DISPLAY_MODE="Production"
else
WLS_DISPLAY_MODE="Development"
fi
if [ "${WLS_USER}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"
fi
if [ "${WLS_PW}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"
fi
if [ "${MEDREC_WEBLOGIC_CLASSPATH}" != "" ] ; then
if [ "${CLASSPATH}" != "" ] ; then
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"
else
CLASSPATH="${MEDREC_WEBLOGIC_CLASSPATH}"
fi
fi
echo "."
echo "."
echo "JAVA Memory arguments: ${MEM_ARGS}"
echo "."
echo "WLS Start Mode=${WLS_DISPLAY_MODE}"
echo "."
echo "CLASSPATH=${CLASSPATH}"
echo "."
echo "PATH=${PATH}"
echo "."
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://hostname:port/console *"
echo "***************************************************"
# CLASS CACHING
if [ "${CLASS_CACHE}" = "true" ] ; then
echo "Class caching enabled..."
JAVA_OPTIONS="${JAVA_OPTIONS} -Dlaunch.main.class=${SERVER_CLASS} -Dlaunch.class.path="${CLASSPATH}" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp ${WL_HOME}/server/lib/pcl2.jar"
export JAVA_OPTIONS
SERVER_CLASS="com.oracle.classloader.launch.Launcher"
fi
# START WEBLOGIC
echo "starting weblogic with Java version:"
${JAVA_HOME}/bin/java ${JAVA_VM} -version
if [ "${WLS_REDIRECT_LOG}" = "" ] ; then
echo "Starting WLS with line:"
echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}
else
echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1
fi
stopAll
popd
# Exit this script only if we have been told to exit.
if [ "${doExitFlag}" = "true" ] ; then
exit
fi

Hi, I can't email photos from iphoto as the email server doesn't recognise my password / username combination... any ideas how i fix this?

Hi, I can't email photos from iphoto as the email server doesn't recognise my password / username combination... any ideas how / where i fix this?

Go to iPhoto's Accounts preference pane and delete the email account there. Then add it back again.
If that fails you can set Mail at the email client for iPhoto in iPhoto's General preference pane. Mail is more reliable, gives you a sent copy and has better access to your contacts. It also has photo templates if you need them. They are in the stationary selection menu.
OT

Share pictures got message "The email server did recognize your username/password combination". Help. Please.

Share pictures got message "The email server did recognize your username/ password combination" Help. Please.

Hi lamvando,
It sounds like there may be an issue with the email account you have setup on your iMac. I would recommend running the Connection doctor in Mail:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks,
Matt M.

What does this mean? The mail server responded: Too many messages. Please check the message and try again.

I use BT yahoo mail with Thunderbird 24.6.0 in the last few days i've started getting this message when sending messages:
An error occurred while sending mail. The mail server responded: Too many messages. Please check the message and try again.
Now sometimes the messages are sent anyway and sometimes not. If I re-send sometimes it works and sometimes not. I've contacted BT 'tech support' who tell me there is nothing wrong with them or their servers and as webmail works ok they won't help. I strongly suspect it IS a BT issue, Any clues to fix this?

The message means BT are lying basically. I have just spent the best part of an hour on chasing what limits BT place on mail sending... the internet contains a void.
The closest thing I can locate is a BT rep here https://community.bt.com/t5/Email/E-Mail-message-limit/m-p/1045228/highlight/true#M17523 refusing to identify what limits they impose but advising their switch to critical path has more stringent controls. AFAIK Critical path is ca mail software solution sold by OpenWave Messaging http://owmessaging.com/
So your paying for a totally undefined service. Congratulations!

Many applications of my iphone 4 do not proceed..I'm feeling bore to use it.So i request the concerned authority to provide me RESTORE PASSWORD to improve the status of my iphone 4...I didn't found it..PLEASE PLEASE all the people are higly requested...

Many applications of my iphone 4 do not proceed..I'm feeling bore to use it.So i request the concerned authority to provide me RESTORE PASSWORD to improve the status of my iphone 4...I didn't found it....maybe restoring iphone may settle down my problem & bring my iphone in good condition/wholly refreshed...PLEASE PLEASE all the people are higly requested...

What are you talking about?
Either restate the question, or post in your native language. "So i request the concerned authority to provide me RESTORE PASSWORD to improve the status of my iphone 4" Is unclear at best.
If you're having some kind of problem, then explain what it is including the exact text of any error messages you're getting.

HT1937 the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another

the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.

Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

HT1414 The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert anothe

The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert another sim card from a supported carrier or request that this iphone be unlocked by your carrier.please contact apple for more information.

I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."

When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.

I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

HT1338 Software Update can't connect to the update server. Make sure you're connected to the Internet, and then try again

I have been getting this message on MAC OS 10.6.3 "Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again". Internet is working fine for everything else. Updating to 10.6.8 and applying all the security updates and patches [directly downloading from the apple website] has not resolved the issue. Read somewhere about a software update enabler for 10.6, installed it, but not helping.. [not sure of the update server settings to be entered] .Is there no way to make the software update work from the Apple Start Menu??

Problem solved.. Expired rules in Little Snitch caused the glitch

I have a merge publication , it says : The merge process was unable to access row metadata at the 'Subscriber'

The merge process was unable to access row metadata at the 'Subscriber'. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to write to, or use SQL Profiler to determine the source of the failure.
(Source: MSSQL_REPL, Error number: MSSQL_REPL-2147200996)
Get help: http://help/MSSQL_REPL-2147200996
Could not find stored procedure ''. (Source: MSSQLServer, Error number: 2812)
Get help: http://help/2812
Failed to get metadata for a batch of rows. (Source: MSSQLServer, Error number: 20680)
Get help: http://help/20680
The process was successfully stopped. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199481)
what can I do ?

Hi,
Are you facing the same problem when starting with a new subscriber database?
From the error message suggested that replication metadata may be corrupt. I suggest you drop and re-create the subscription.
Then click on synchronization status and run the snapshot agent. It hard to tell the cause unless we check Merge Agent error log.
Regarding the Unreadable Characters,
change system locale to Chinese if current system locale is English and test the issue. A computer restart is required to make the change effective.
Thanks.
Tracy Cai
TechNet Community Support

The SharePoint Server Publishing Infrastructure feature must be activated at the site collection level before the Publishing feature can be activated.

Hi All,
I am trying to activate the Publishing feature for a SharePoint website using a custom Site Definition File. The problem I am getting
is when I try to use the custom site template I get an error message:
New-SPSite : The SharePoint Server Publishing Infrastructure feature must be activated at the site collection level before the Publishing feature can be activated.
The custom
Site Definition File snippet is show below:
<?xml
version="1.0"
encoding="utf-8"?>
<Project
Title="SiteDefinition1"
Revision="2"
ListDir=""
xmlns:ows="Microsoft
SharePoint"
xmlns="http://schemas.microsoft.com/sharepoint/">
<NavBars>
</NavBars>
<Configurations>
    <Configuration
ID="0"
Name="SiteDefinitionDelegateControls2">
      <Lists/>
      <SiteFeatures>
        
        <Feature
ID="{3bae86a2-776d-499d-9db8-fa4cdc7884f8}"
Name="FeatureDefinition/15/3bae86a2-776d-499d-9db8-fa4cdc7884f8"
/>
        
        <Feature
ID="{a392da98-270b-4e85-9769-04c0fde267aa}"
Name="FeatureDefinition/15/a392da98-270b-4e85-9769-04c0fde267aa"
/>
      ...Other Site Features
      </SiteFeatures>
     <WebFeatures>
        
     <Feature
ID="{94c94ca6-b32f-4da9-a9e3-1f3d343d7ecb}"
Name="FeatureDefinition/15/94c94ca6-b32f-4da9-a9e3-1f3d343d7ecb"/>
     ... Other Web Features
      </WebFeatures>
      <Modules>
        <Module
Name="DefaultBlank"
/>
      </Modules>
    </Configuration>
</Configurations>
<Modules>
    <Module
Name="DefaultBlank"
Url=""
Path="">
      <File
Url="default.aspx">
      </File>
    </Module>
</Modules>
</Project>
I hope you can help
Colin

As the error says. The Publishing Infrastructure feature must be activated at the Site Collection level where you are creating a new site PRIOR to turning on the Publishing feature. So if you are trying to use this site definition to create a
new Site Collection then its not going to work. If you are trying to create a sub site then make sure that Publishing Infrastructure is enabled in the site collection before trying to create a sub site with this site definition.
Internally Microsoft does this for the Publishing Portals using custom code. Here's an article that discusses how to do it in SharePoint 2010.
http://msdn.microsoft.com/en-us/library/office/gg615465(v=office.14).aspx
Compare what's in the article to one of the Publishing templates available out of the box in 2013 and you should be able to find the assembly that is used to load the Publishing features.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

After I use the camera icon on the lock screen it doesn't requires password to use the iPhone, After I use the camera icon on the lock screen it doesn't requires password to use the iPhone

After I use the camera icon on the lock screen it doesn't requires password to use the iPhone,

You have the password requirement set to something other than "Immediate".
Settings > General > Password Lock > Require Password

Just upgraded to Yosemite 10.10.2 on my iMac 24 inch and now my Suddenlink POP email account won't accept messages. The message says unable to receive Mail and the warning says: Mail cannot send your password securely to the server. You can remove th

Yesterday I uploaded Yosemite 10.10.2 thinking it was fixed by now. In Mail, my POP account gets this error message: Mail cannot send your password securely to the server. You can remove this restriction in the Accounts preferences by setting “Allow insecure authentication”, which could put your password at risk.
My provider says it's an Apple issue. The gmail accounts are logging in fine. Any help? Something simple?
Thanks anyone.

Thanks Csound1. That did work and Mail was able to connect to the internet. Green light status. Is it because of my provider that I may never have had secure connections? Is that an Apple thing or do PCs have the same issues? Appreciate your help. I'll research insecure connections as I am ignorant of the consequences.

How do I stop Dreamweaver from updating the Test server copy of a file when I open the local file?

The subject says it all. Every time I open a file, Dreamweaver connects to the testing server and uploads the local file to the test server.
I want to stop this behaviour. It's annoying!

My testing server is IIS running on my local machine.
The "local" copy of the file is actually on a remote share. I have the test server copy open in Notepad++. The two files are identical save for on extra line in the copy on the testing server. When I open the "local" copy in Dreamweaver, it shows me that some file activity is being done, and then Notepad++ tells me the file has changed and do I want to reload it. If I do, that extra line vanishes.
When I check the file activity log, it shows that the file activity is complete.
I haven't mentioned the production server because it doesn't seem to be affected, but we do have one.

The vcenter server is unable to decrypt passwords stored in the customization

Similar Messages

Maybe you are looking for