The Version number can't be greater than the current version number

Hi,
We are executing SSIS JOB from 2008R2 server, what the job do is it pulls the data from SQL 2012 Server. During this process we got the attached error found, please help me how to troubleshoot this.
Also
We have ownership issue with the Hyperion output files that are created at Shared location
since User 1 will be executing the package manually and it is also running as a scheduled job on the SSIS server. When the scheduled job creates the file, the previous/existing extract file will be owned by the SQL Agent account. When User1 executes
the package manually it will fail because it will run under User1's credentials and will not overwrite the existing file which is owned by SQL Agent.
The same will occur in the opposite case where User 1 has run the process manually and the existing output file is owned by him – then the scheduled job will fail because the SQL Agent account will not overwrite/delete User1's file.
Could you please tell me guys how to sort it out this issue?
Thanks
DBA

Any other error preceeding to the error you attached?
You may try using command which will use SQL 2012 DTExec version and provide SSIS package path there.
SQL Job with CmdExec and command like below:
C:\Program Files\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /F "c:\packagepath\packagename.dtsx"
Ownership issue:
Is the logic correct in SSIS package? Does it check if there is any existing file, if yes then update/delete so on...
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Similar Messages

Can shmmax be greater than physical memory?

Hi-
Can setting shmsys:shminfo_shmmax greater than the physical memory on a server cause any problems?
Also, what ist he maximum shmsys:shminfo_shmmax setting for 5.8 running 64-bit?
Thanks for your thoughts.
- Ed

I can't see how it would cause problems. This variable simply tells the shared-memory applications how big segments that they are allowed to create.
The check which determines if it actually have the resources to create the segment are performed at a later stage.
7/M.

Delivery qunatitiy can't be greater than STO qnty .

Is there are any standard setting to prevent delivery qunatity below or equal to STO (stock transport order ) Qunatity .??
Currenlty my delivery quantity can be made more tha STO quantity ,which leading problem in day to day busniess ...
Sourav singh

Hi
You can make the setting in delivery item category by going to the below path
SPROIMGLogistoics execution-Shipping-Deliveries ---Define item categories for delivery (OVLP)
Maintain Check minimum quantity "B"
By doing the settings also it will not work in case of deliveries made reference to STOs.
As you can see from note 548914 this functionality
doesn't exist.
Regards
Damu

Total of %db time column is greater than 100 in AWR report

Hello,
I have a query regarding "To 5 timed foreground events" section of AWR report.
On many occassions I found that the sum of all the values in the %db time column as mentioned above is grater than 100.
How can percentage be greater than 100?
Event
Waits
Time(s)
Avg wait (ms)
% DB time
Wait Class
DB CPU
29,212
98.18
latch: shared pool
2,291
286
125
0.96
Concurrency
direct path read
147,998
112
1
0.38
User I/O
library cache: mutex X
4,831
92
19
0.31
Concurrency
log file sync
36,736
72
2
0.24
Commit
In the above case the total comes up to just 100.07 % but I have seen reports where the total goes beyond 120 % -130 %.
Can you explain why this happens, please?
Thanks,
Rushi

Can someone explain above situation, please?

Greater Than Clause in Parition

Hi,
I need to find out why can we use greater than value clause instead of Less than clause in Oracle Partitions.
Can anyone advice me.
Cheers!!!

Nope, not according to syntax for range_values_clause
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7002.htm#i2125922
Regards
Peter

The version number cannot be greater than current version number

i am deployingmy ssis package which is in 2012.(version 6)
and my ssis server also in 2012.
but i am getting error:
"the version number in package is not valid, the version number cannot be greater than current verison number"
and one more thing how to see ifmy package is in 2012,by looking it in notepad?

Hi coool_sweet,
Based on the error message that "The version number in the package is not valid. The version number cannot be greater than current version number.", we can infer that the underlying cause may be that the current SSIS package is created in SQL Server
2012, while you are trying to open or execute it in SQL Server 2008R2 or earlier versions.
As to your scenario, I guess you are using old version of the DTEXEC instead of the new one to run the package. That means, the exe shipped with 2008R2 or earlier versions is picked up when it is expected to use the one shipped with 2012. So, obviously this
happens when SQL Server 2012 is running along with SQL Serve r2008R2 or earlier versions on the same machine.
To fix this issue, there are three workarounds to correct this.
Hard code the path of SQL Server 2012's DTEXEC while calling the SSIS package as shown below.
C:\Program Files\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
Rename the old exe in the 2008R2 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC_Old.exe)
Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\110\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error - The version number in the package is not valid. The version number cannot be greater than current version number

whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading The version number in the package is not valid. The version number cannot be greater than current version number.
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
    get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
    "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
    Get-EventLog : No matches found
    At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
    + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
    -eq $msftesqlCrashEventId}
        + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
        + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
    Name IsDeadLocked CatalogStatusArray
    SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
    Server Database ServerGuid ResultFound SearchTimeInSeconds Error
    SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my

My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

How to prevent numericstepper from setting the value to the defined Maximum when a number greater than maximum is entered in by keyboard and user hits the "Enter" key.

I need to set the Maximum so that the use can use the mouse to change the value of numericstepper (and not go over a certain number), but at the same time I have to allow the user to enter their value by typing in the text field. When the user enters a number greater than the Maximum, I disable the "Ok" button of the dialog and show a red warning(error message). The issue is that the user can hit "Enter" and numeric stepper would set the value to the Maximum and the dialog box would close and the rest of code would run. I want the numericstepper not to change the value and keep showing the warning even if the user hits the "Enter".
Note: Setting maxChar does not help since my maximum is 1000, and user might enter 5555
I would appreciate the help.

Thanks for trying to help, But
The issue is that if I set the maximum value of stepper 1 greater than the max value that I want, then the user can select an invalid value(of myMax + 1) when he clicks on the UP arrow of the numeric stepper(which is not acceptable for what I am working on).
I need to preserve the users invalid number, while not letting the user to select an invalid number by clicking UP key.
I noticed that when the user enters a number greater than the Maximum, and then click on the down arrow, it would set the value to 1 less than the maximum. This is not acceptable either.

Increasing maximum number of Logical Processors in a Processor Group greater than the default (64)

Can the maximum number of Logical Processors allowed in a Processor Group be increased by Bcdedit command or registry key to a number greater than the default (64) to allow non-group-aware applications to seamlessly scale via multithreading across more cores
MSDN documents methods to reduce the max number of LP's in a Processor Group to 1 or any power of 2 less than 64 in order to increase the number of Processor Groups. But there is no discussion of how to increase the maximum number of Logical Processors
allowed in a Processor Group to a number greater than the default (64), e.g. to 128 or 256.
Since a non-group-aware application/process can only run on 1 Processor Group, increasing this limit is needed to allow non-group-aware multithreaded applications to scale seamlessly for parallel computation across more than 64 cores simultaneously on systems
with more than 64 cores (for example, a quad-socket Intel Xeon system with 24 cores per socket, including true and hyper cores). If that limit can be set via registry key or command line, or if there is another way to force all the cores on
all 4 sockets (4 NUMA nodes in this case) to join in 1 Processor Group, then non-group-aware applications will not need to be rewritten using group-aware thread-affinity APIs.

Hi John,
Are you trying to specify a static NUMA-node-to-group assignment, rather than letting Windows dynamically assign NUMA nodes to groups at boot time? If yes, You can refer the
following related KB:
How to manually configure K-Group assignment on multiprocessor machines
http://support.microsoft.com/kb/2506384
Systems with fewer than 64 logical processors always have a single group, Group 0. On systems with 64 or fewer processors, existing applications will operate correctly without
modification. Applications that do not call any functions that use processor affinity masks or processor numbers will operate correctly on all systems, regardless of the number of processors. To operate correctly on systems with more than 64 logical processors,
the following kinds of applications might require modification:
•Applications that manage, maintain, or display per-processor information for the entire system must be modified to support more than 64 logical processors. An example of
such an application is Windows Task Manager, which displays the workload of each processor in the system.
•Applications for which performance is critical and that can scale efficiently beyond 64 logical processors must be modified to run on such systems. For example, database
applications might benefit from modifications.
•If an application uses a DLL that has per-processor data structures, and the DLL has not been modified to support more than 64 logical processors, all threads in the application
that call functions exported by the DLL must be assigned to the same group.
By design, a non-NUMA computer is considered to have one NUMA node. Because NUMA nodes cannot span groups, the system creates a node for each group after you restart the computer.
The related KB:
Processor Groups
http://msdn.microsoft.com/en-us/library/windows/desktop/dd405503(v=vs.85).aspx
More information:
Uneven Windows Processor Groups
http://blogs.msdn.com/b/saponsqlserver/archive/2011/10/08/uneven-windows-processor-groups.aspx
Boot Parameters to Test Drivers for Multiple Processor Group Support
http://msdn.microsoft.com/en-us/library/windows/hardware/ff542298(v=vs.85).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't add numbers greater than 100 in the Data Editor for a column chart

I'm trying to create a column chart in Keynote '09 but every time I add a data point with a value greater than 100 in the Data Editor it turns the number into a date. I have the Y Axis set to "Number" and it works fine for numbers less than 100 but I want to show a graph that goes from 0 - 1000. Is this happening to anyone else?
Chart Settings:
Y Axis Options:
- Max = 1000
- Steps = 5
- Format = Number
X Axis Options
- Show Axis
- Show Categories
- No Tick Marks
thanks in advance for the help

Welcome to the discussions, AlexEberts.
No, it's not happening for me. This is what I'm doing
1) Insert -> Chart -> Column
2) In the Data editor, for 2007, I enter 110.
The chart automatically expands to 110 (because, by default, it's set to autosize the Y-axis)
Does this work for you? If it does, then we can look at why it doesn't work when you add parameters.

How can I type the symbol for greater than or equal to

I wish to type the symbol for greater than or equal to in an equation but my keyboard does not have such a symbol

Mathematical Operators - 2200-22FF
:≥     &#x2265; 8805 GREATER-THAN OR EQUAL TO
:http://www.sql-und-xml.de/unicode-database/mathematical-operators.html
If this is for HTML use &ge; to create ≥
you can bring up CharMap (charmap.exe)
go down 11 windows (of 10 rows each) and it is on bottom row
You should be able to type as Alt+8805 on the Numeric keypad (not number row)
or on laptop with NumLock off as Fn+Alt+8805
but that is not working for me and I verified that hex(x2265) and decimal (8805)
values are equivalent.

Can I have more than one version of adobe reader at the same time?

can I have more than one version of adobe reader at the same time?

If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs. Says it can find it and then leasds me to locate it. I don't know where to look. Help!!!

I just updated iTunes to the latest version and now I can't play more than half of my songs. When I click on a song it comes back and states that it can't find it and prompts me to try and locate it. I don't know where to look. Help!!!!

Hi ldhong,
There are a few ideas in this article on how and where to look for missing iTunes media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Hope this helps!
- Ari

The Version number can't be greater than the current version number

Similar Messages

Maybe you are looking for