There are horizontal white lines through display picture, and some vertical blue lines. sometimes screen is all black, sometimes whited out, sometimes half white lines, half completely unvisible. white lines have spread from just a few on top

i just want to know if anyone has encountered this problem and if it is worth getting fixed/looked at. its an older nano so im thinking about just buying an itouch. any help is greatly appreciated!!

Hi, and welcome to Apple Discussions.
Problems like this can be caused by a cable pinched in the hinge. When you start seeing the display problems, does adjusting the angle of the display make a difference?
There is a known logic board fault in this model iBook which resulted in the iBook Logic Board Repair Extension Program. However, in my experience, if the logic board is involved with display anomalies, it causes the system to freeze up, necessitating a hard shutdown and waiting several hours for a restart. Another symptom of the logic board problem is if pressure on the case to the left of the trackpad on the left wrist rest improves the situation.
Based on my experience, it sounds more like a cable caught in the hinge, since you're not seeing system freezes. Let us know if adjusting the display's angle (a bit forward or a bit back) makes a difference.

Similar Messages

HT4641 after modifying a document in Pages I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?

When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?

Thanks - let it finish, but zero out data is unnecessary. That option is intended to thoroughly erase previously recorded data so that it cannot be recovered without sophisticated data recovery techniques.
Case sensitive is OK but I suggest you simply select Mac OS X Extended since "case sensitive" may complicate things for you in the future, should it be necessary to restore files to a case-ignorant volume.
Once it finishes, make sure it appears as a selectable option in Time Machine. If it does your problems are solved, but consider using Disk Utility and reformatting it. This time don't worry about zeroing unused space, and select Mac OS X Extended (Journaled). It will only take a few seconds this time.
For a more thorough description read Apple Support Communites contributor Pondini's FAQ: http://pondini.org/TM/5.html Read the pink box regarding the subject of case sensitivity.
Also: Mac Basics: Time Machine

Hi, I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

Hi,
I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

What program are you using for this editing?
We can ask a Host should move your query over to that forum.

My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open?

My new Photoshop Elements 12 has a RAW file plug-in, but when I try OPEN to select a photograph, there are only generic icons instead of pictures-- I can't tell one photograph from another! How can I fix this so I can tell which photograph I want to open? Thank you!

Thanks R_Kelly:
Adobe Photoshop Elements Version: 12.0 (12.1 (20140303.12.1.49334)) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2400 MHz
Built-in memory: 3069 MB
Free memory: 1631 MB
Memory available to Photoshop Elements: 1598 MB
Memory used by Photoshop Elements: 69 %
Image tile size: 128K
Image cache levels: 8
Video Card: ATI Radeon HD 4800 Series
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4800 Series
Video Card Memory: 512 MB
Application folder: C:\Program Files\Adobe\Photoshop Elements 12\
Photoshop Elements scratch has async I/O enabled
Required Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Photoshop Elements 12\Plug-Ins\
The first thing I did was UPDATE. I have all the latest updates available (according to the updater). The Camera Raw Plug-in says it is version 8.0.
The RAW files are from a Canon T3i. It's a very common camera, I can't believe it wouldn't be supported.

On receiving jpegs via email, sometimes they get corrupted, and there are horizontal blocks appearing on the image

On receiving jpegs via email, sometimes they get corrupted, and there are horizontal blocks appearing on the image that distort the image. Help???

Hi Bruce523,
Let's get to the bottom of this, your efforts are greatly appreciated! What is the software version on your device:http://vz.to/ZVhZsh ? I look forward to hearing from you soon.
Thanks for your contribution to our community forums,
AyaniB_VZW
Follow us on Twitter @VZWSupport

When I render and Export there are these little lines around moving objects

When I render and Export there are these little lines around moving objects, what are they and how do I fix it?

The lines are caused by the video being interlaced.
If you export to DVD they should no longer appear. However, if they don't disappear you can use the Deinterlace filter on the footage whilst in FCE.
How are you exporting ..... QT Movie or QT Conversion ....... and what are you exporting to - the internet or DVD?

There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles and no errors reported.

There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. Local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles, I get no further and no errors reported. Safari, Opera and Firefox. Deleted cookies and chain but still no action.

If you have not already done so, read the router's user manual troubleshooting section and/or contact its customer service department/forums.
If still having problems, post back w/details of all you have tried to resolve the problems along w/the troubleshooting solutions that the "local techies" had you try.

Firefox won't load SOME pictures and SOME graphics from Huffington Post; Explorer will load them

This is a problem that ONLY occurs with Huffington Post. I haven't had trouble with any other websites. With the Huffington Post site, the big photo at the top of the page loads, but none of the smaller photos on the page load--all just white blanks. The other thing that is not loading is the names in the line at the top of the page which lists various sections of the website starting with FRONT PAGE, POLITICS, BUSINESS, ENTERTAINMENT...... and ending with ALL SECTIONS. However, when I go to Internet Explorer, the Huffington Post website loads perfectly.

Some images come from i.huffpost.com/
So you can check that you aren't blocking images from servers like that.
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.image pref should be 1.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green. The sound continues.

I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

Sorry, everyone. I think I may have figured out what it was all down to...........
I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged. I did this so as not to endanger my years of work on the third drive, until Windows had setup. I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
This was not a problem on my old system, but it seems this system doesn't like it.
I must have left the drive completely unplugged, the times Windows did setup. Amazing really. I couldn't see the woods for the trees.
Anyway, I'm sorry to have bothered everyone with my problem.
Cheers
Marcus
edit : Sorry Syar2003, I didn't see your reply until I had posted mine. Many thanks for taking the time to try and help me, it seems as though I may have sorted it now. I am using IDE drives until I can afford SATA. But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid. I didn't know they would be updated at the same time.
Again, cheers
Marcus

TS3276 mail messages often fail to display pictures and graphics?

i have a problem with some mail messages in that they do not display picture and graphics. i have Flip4Mac installed and have a late model Macbook Air 13 inch running Mavericks

Assuming that your operating systems are as steated in your signatures, you both may find it helpful to remove the account from Mail Preferences/Accounts and then set it up again following the instructions here:
Entering iCloud email settings manually in Snow Leopard or Leopard

Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

Hi, just need to know how to get my music, video, pictures and apps form my iPhone to my new laptop as the old computer, which I used before was stolen. I only have my phone left and if I try to conect it to my new laptop it's trying to delete everything.

I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

GiGe camera waits till there is a TTL signal takes a picture and then waits again for another TTL signal (IMAQdx)

Hello , I have a problem with a GIgE AVT camera.
All I want to do is make the camera wait and each time there is a TTL signal snap a picture and save it to the disk.
I have spent hours and hours trying to make this work but I had no luck !
Could someone with knowledge of the IMAQdx drivers help me please !?
I really can't find a solution to this problem!

Hello LaThoS,
thanks for your reply .
What i am trying to do is use an AVT GS660 which actually has a hardware trigger input and all i am trying to do is put it in a while loop and make it wait untill there is an external ttl signal, then take a picture , save it and then wait for another ttl signal !
I 've seen the examples but i cannot see how they are going to be usefull to me since there is no hardaware ttl signal on the cam( https://decibel.ni.com/content/docs/DOC-15346)
I am attaching my sample code.
Could you please help me figure it out ?
Thanks in advance,
yannis.
ps:the problems that i am facing is that on ttl the camera starts saving the same image continisously till i stop the loop !
Attachments:
AVT_v5_NI.vi ‏75 KB
enum.ctl ‏4 KB

There are two CDC methods - Source based CDC and Target based CDC which one

There are two CDC methods - Source based CDC and Target based CDC, which one is better performancewise. in data services.
If there is any document available which compares both and provides any info on performance etc, will be helpful.
thank you for the helpful info.

LIke Suneer mentioned CDC is for better performance.
Following link would be helpful.
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Source-Based+CDC
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Target-Based+CDC
Thanks,
Arun

I tunes asked me if I wanted to back up my iphone. I thought itunes backed up my iphone data so i sad yes but it turned out itunes backed up my ipod datas on my iphone =( is there any way I can get my pictures and messages back? Thanks!

I tunes asked me if I wanted to back up my iphone. I thought itunes backed up my iphone data so i sad yes but it turned out itunes backed up my ipod datas on my iphone =( is there any way I can get my pictures and messages back? Thanks!

If you have a backup of your computer, here's the location of the iTunes backup folder:
Where are iTunes backups stored on your computer
The folder where your backup data is stored depends on the computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your home folder, hold Option and click the Go menu.
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press Return.
copied from http://support.apple.com/kb/ht4946

There are horizontal white lines through display picture, and some vertical blue lines. sometimes screen is all black, sometimes whited out, sometimes half white lines, half completely unvisible. white lines have spread from just a few on top

Similar Messages

Maybe you are looking for