There is no field to type URL's at Firefox startup page

When I open Firefox start up page....I get the Firefox/Google Search page at start up. In the past there was a field at the top of the page that allowed me to type a URL address. This field no longer appears at the top of the start up page so I have no way of typing a specific URL address that I want to go to.
Can you please tell what I can do to have this field appear at the top of my start up page?

It sounds like either the navigation toolbar is hidden or the location bar has been removed from the navigation toolbar. For details on fixing that see https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Similar Messages

Ad-blocker is not blocking Firefox ads. Is there a way to block these ads from the Firefox home page?

Whenever I open a new Firefox window there is a new Firefox ad. AdBlocker Plus does not seem to block Firefox ads. All ads are annoying. Period. Even yours. Is it possible to block these ads? Please advise. Thanks!

What is it that you are seeing. I think firefox only displays web pages, rather than popup adverts etc.
If you are talking about the new page seen when you update from an earlier version, that should only display the once. If yours displays continuously and repeatedly on startups then maybe something is blocking the required change.
* see http://kb.mozillazine.org/Browser.startup.homepage_override.mstone & consider changing the preference manually

Unicode - "DMBTR" must be a character-type field (data type C,N,D or T)

Greetings Experts!
I am trying to convert legacy code to Unicode for a current ERP6.0 reinstallation and have encountered the syntax error "DMBTR" must be a character-type field (data type C,N,D or T)
The field is part of a structure and the fields attributes are as follows:
COMPONENT = DMBTR
COMPONENT TYPE = DMBTR
DATA TYPE = CURR
LENGTH = 13
DECIMALS = 2
DESCRIPTION = Amount in Local Currency
The code in question is as follows:-
macro Move_Zoned.
Converts a numeric variable to zoned format and moves it to a
target variable.
DEFINE move_zoned.
 &1 - source variable
 &2 - Number of Decimal Places
 &3 - 'To'
 &4 - Target Variable.
write &1 to w_zoned no-grouping decimals &2.
condense w_zoned.
 Remove the Decimal Points.
search w_zoned for '...'.
while sy-subrc = 0.
 move sy-fdpos to w_to_point.
 if w_to_point = 0.
 w_to_point = 1.
 endif.
 compute w_from_point = sy-fdpos + 1.
 concatenate w_zoned+0(w_to_point)
 w_zoned+w_from_point
 into w_zoned.
 search w_zoned for '...'.
endwhile.
shift w_zoned right deleting trailing space.
translate w_zoned using ' 0'.
call function 'Z_TRANSLATE_ZONED_DECIMALS'
 exporting
 i_input = w_zoned
 importing
 i_output = w_zoned
 exceptions
 x_invalid_zoned_char = c_invalid_zoned_char
 x_numeric_info_lost = c_numeric_info_lost
 others = c_other_zoned_error.
 Get the length of the recipient field so we don't truncate the
 numbers....
describe field &4 length w_flength in character mode.
describe field &4 type w_type.
describe field w_zoned length w_zoned_len in character mode.
if w_zoned_len <= w_flength.
 move w_zoned to &4.
 shift &4 right deleting trailing space.
 translate &4 using ' 0'.
else.
 Get the start position....
 If it's a packed field allow for values up to 6 figures
 compute w_zoned_len = w_zoned_len - w_flength.
 if w_type = 'P'.
 subtract 2 from w_zoned_len.
 clear w_type.
 endif.
 move w_zoned+w_zoned_len &3 &4.
endif.
END-OF-DEFINITION. "Move_zoned
LOOP AT t_single_kunnr.
 move_zoned t_single_kunnr-postamt 2
 to t_single_kunnr-dmbtr.
 DIVIDE t_single_kunnr-dmbtr BY 100.
 MODIFY t_single_kunnr.
ENDLOOP.
Is there a solution to get past this syntax error as I would rather not change the datatype of the field in the structure.
Much Obliged
Elphick.

Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
 CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP = c_hex
RECEIVING
CHAR = LV_TMP .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
 abap_char_utilities=>HORIZONTAL_TAB.

Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

How to add a search help to a field Bank Type in Transaction FK02

Dear All,
     How to add a search help to a field Bank Type in Transaction FK02.
     Is there any possibilty of using exit or searc help or domain to solve this problem.
        Thanks in Advance..
Thanks,
Lakhsmi.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

How to validate a field of type text for similar values

Hi,
My requirement is to validate a field Name1 of type Text[40] for similar values when a new record is created. So If the Name1 already exist in repository, the validation has to give warning message saying the customer with Name1 already exist.
Regards,
Madhu

Hi Madhu
To validate a particular field, when a new record comes along with the same value SAP MDM is not capable of generating warning messages, but we can have best method of Tracking at Import manager level.
In the Import manager after successful mapping, access the MATCH RECORD tab. Go to the Default import action area there you can find Match type & Default import action. For example if you are sending same Material record which is already available in the Repository, Match type will have the value EXACT where as Default Import action will have UPDATE (ALL MAPPED FIELDS or NULL FIELDS).
Here I have copied various Match types as well as Default Import Actions along with the definitions, pls go thru the same and feel free to revert to me for further clarifications.
Default Import Action
Skip -> Skip source value combinations that already
exist.
Update(NULL Qualifiers Only) -> Update just the NULL remaining qualifiers of each existing qualified lookup value.
Update (All Mapped Qualifiers)-> Update all the remaining qualifiers of each existing
qualified lookup value.
Replace -> Replace all the remaining qualifiers of each existing qualified lookup value by first deleting them and then creating a new value combination.
Delete -> Delete this qualified lookup value during import Processing.
Match Type
None -> None
Exact -> Whether the match type for the destination record with the current source
record is Exact.
Partial -> Whether the match type for the destination record with the current source
record is Partial.
Conflict -> Whether the match type for the destination record with the current source
record is Conflict.
Thanks
Alexander
Message was edited by: Alexander Raja

Adding field 'Document Type' to Cash Flow Statement form in FSI5

Dear SAP Experts
I am developing a 'Cash Flow Statement' using FSI5/FSI3 functionality. I need to have a field 'Document Type' in the list of characteristics.
Can anyone of you guide me how can I add this field?
An urgent reply is highly appreciated.
Thanks
Syed Zia Abbas

Hi Abbas,
I have few comments, which should help to solve your
problem. Please take a look to note 43661 which describes the
creation of new forms and reports.
Following are the steps to create the form and report:
FSI4 => Form type: Financial Statement Key Figures => Copy
             Form: Name and Text for the new form
             Copy from: 0SAPRATIO-04
FSI5 => find and double click the new form just created => Edit Gen.
data selection => change the FSV to what you want to use
FSI1 => Report type: Financial Statement Key Figures => Create
             Report: Name and Text for the new report
             With form: Name of the new form details please refer to standard SAP report 0SAPRATIO-04
FSI3 => find and execute the new report to check if you can get the
result you want.
To change the fin. statement version in the general data selections of
your new form is not enough. You have to check each line of the new form
too and replace the fin. statement items with items of your own fin. statement structure.
- The mentioned forms contain restrictions via for example financial
statement items in rows and years and/or periods in columns. But, if
you execute the reports, you get no results. It is because the forms
are just an example templates for items of financial statement version
(FSV) INT, which is also just a template.
To be able to get requested results, you have to create your own
forms (and reports based on your forms) with restriction via your
own financial statement version (in general data selection) and the
financial statement items corresponding to your FSV (in particular
rows). Otherwise, you cannot get any results, as there are no values
for the template FSV INT and items from the INT.
But it is up to you, how you arrange the form definition. It is
closely related to your own FSV definition.
I hope you find this information useful.
Jose Luis Carbajo

Problems in transaction F871,with the field docuemnt type:

Hello,m
I´m trying to create a Payment Request with transaction F871,and I have a problem with the field docuemnt type that is mandatory, when I try to open the match code there is no values, and a message is displayed as follows: " No document type assigned to request category 01 "

Hello Olga,
Thanks for your words in the other thread. In any case your english is perfect, it is not my mother language also so apologize my errors too
Please check if you have done this customizing:
SPRO -> Public Sector Management -> Funds Management Government -> Funds Management-Specific Postings -> Requests -> Request Types -> Assign Request Category to FI Document Type
I hope it helps.
Greetings from Brazil
Vanessa.

How Can I Change Format Mask For All Fields that type's Number Depend on Parameter in Report Builder 10g ?

I want Change format mask for all fields that type's number
Such as
if :parameter_value = 1 then
all fields format mask = ' 999,999,990.000' ;
else
all fields format mask = ' 999,999,990.00' ;
end if;
Regards

So, i have bad news for you : you'll have to rebuild again.
Meanwhile i have excellent news for you : there's an online tool made by Johannes Henseler called Sidecar xml which builds the necessary xml file for you, sort of what you find in the Digital Publishing Folio Editor website, but saves it in your Folio folder.
Next time you import all your folder (with that file), it will place all the necessary information, and even reorder the articles.
Build once, play many times.

Change field Stock Type in transaction MIGO

HI Gurus
My user wants to change the field Stock Type in good receipt after that good receipt has been created .
Is there a way to change this field ? Using transaction MIGO can only display the good receipt .
Thanks in advance

Once GR has been done you can not change the stock type in display.
Using MIGO at the time of goods receipt you can change the stock Type. Once you have posted to a wrong stock type then you need to do the transfer posting from stock type to stock type.
Explain your requirment?
Check [Stock types|http://help.sap.com/saphelp_46c/helpdata/en/a5/63393f43a211d189410000e829fbbd/content.htm]

Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird?

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Pass Multiple values of single field to ITS url

Hi ,
I have one transaction code(YW37P),
I that have one field(Order No) in the selection screen, which has capable to accept multiple values (i.e multiple single values) and excute the t code.
Now my question is how to pass this multiple values of one single field to the ITS url and by pass the selection screen.
I have gone through the blogs which explains about how to pass only one single value of single field to ITS url and by pass the selection screen
please provide some solution for this
Regards
Srinivas

Hello Srinivas,
How do you enter multiple order numbers in the field usually? Is there a space or comma separating the numbers? If so you will probably need to encode the space or comma, ie if a comma %2C. The easiest way to figure it out is to use a tool like HTTPwatch and capture the POST data to see the value that is normally sent by the transaction.
Edgar

Folder type URL

Did somebody have problems with folder type URL (external web site, i.e yahoo)that is set up to be displayed on the content area page? I'm under Oracle network and I've already tried to set up the proxy settings on Global settings, but it doesn't work because using this configuration I can't see any folder on the content area.
If I set up to display in a full window I get it, otherwise I can't see the page. The same problems happen for items which type is URL (external site).
Thanks in advance.

It is on NT, with oracle 8.1.7.
<BLOCKQUOTE>quote:<HR>Originally posted by Karthic Lakshmanan ([email protected]):
Caroline,
Is this on NT or Solaris? There are known problems with 816 on NT. Upgrading to 8162 does seems to solve some of the problems.<HR></BLOCKQUOTE>
null

Region type URL and character set encoding

Hello,
I'd like to include static html page using URL region, but there is some translation done between encoding of input static html page and output of HTML DB. Does anyone know how the file encoding is translateded when the page is rendered?
I have tried some encodings of input file (CP1250, UTF-8, Unicode) but it did not work.

DarkFiBrE72 wrote:
Its AL16UTF16,
From metalink
Starting in Oracle 9i the National Characterset (NLS_NCHAR_CHARACTERSET) will be
limited to UTF8 and AL16UTF16.
For more details refer to The National Character Set in Oracle 9i and 10g
Any other NLS_NCHAR_CHARACTERSET will no longer be supported.
When upgrading to 10g the value of NLS_NCHAR_CHARACTERSET is based
on value currently used in the Oracle8 version.
If the NLS_NCHAR_CHARACTERSET is UTF8 then new it will stay UTF8.
In all other cases the NLS_NCHAR_CHARACTERSET is changed to AL16UTF16
and -if used- N-type data (= data in columns using NCHAR, NVARCHAR2 orNCLOB )
may need to be converted.
Edited by: DarkFiBrE72 on Sep 24, 2008 7:12 PMI'm not sure if the OP was referring to the National character set? Is this implied by the corresponding SQL Server characterset mentioned?
Otherwise I would assume we are talking about the Database character set, which allows numerous different character sets and types (single-byte, multi-byte, Unicode etc. depending on Oracle release).
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Storing a xml excel file in a field of type string in a transparent table

Hello Experts,
I have a program to maintain. There is a transparent table which stores a XML excel file. I have used where used list option to find out if there is an existing program which used that table but couldnt find one.
In debugger mode, when I view the contents of the field, i can see list of characters, when i choose the option of viewing in xml browser, it opens me the excel file.
My requirement is to make a simple change to the excel file and store it back to the table in the same format it is.
Can someone explain to me, how to convert that xml excel file into string so that it is stored in a field of type string.
Thanks Nitish.

You can use the parser method provided in CL_XML_DOCUMENT class. Search for this particular class in the forums, you'll find many relevant post.
BR,
Suhas

There is no field to type URL's at Firefox startup page

Similar Messages

Maybe you are looking for