There is nothing about MS-7311 on the web?!

I have MSI motherbord MS-7311.
I've checked whole web and all official MSI web pages. Started a lot of diagnostic programs...
And i found nothing
Can any MSI official staff tell me where i can find information about BIOS updates, specifications and any manuals please??

Yes there is something on the web for that MB, see what I write below going by my web search.
Probably because it's most likely from a Medion PC and made for OEM market and was never a MSI retail product is the reason you find no information on MSI website.. You would need to check Medion or whatever PC manufacturer the board came from for the info you require. Neither MSI nor this forum offer end user support for OEM products like that since the specs are custom made to OEM makers requirements.
Topic locked.

Similar Messages

There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

TS1368 I have tried uninstalling and re-installing and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
Network connectivity:
     Network interfaces, verified
iTunes Store connectivity:
     Internet connection, verified
     Secure link to iTunes Store, FAILED
Does this help?

Quick Question about Cisco 3560 and the Web Device Manager

Alright, I have a quick question that I am curious about but I haven't found any information
about it.
When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below the
diagram of the switch, then under the Dashboard there is section called Switch
Health, Port Utilization.
Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sit
at zero and do not move. The Port tilization graph is also sitting at zero.
Is there a way to make them functional?

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

HT1918 When I go to put my credit card on my itunes account, it tells me to see itunes support.... I looked around on the website, but there is nothing about this problem. Please help?

It keeps telling me to see itunes support... but I can't find anything on the website related to my problem. I double checked my card information, but it isn't helping.

If you still have your old card listed on your account then try selecting the 'none' option and remove it and then try entering the card's details from scratch. If that doesn't work then what is the full error message that you are getting, and the card is registered to the same name and address (including format and spacing) that you have on your iTunes account ?

Hi, I downloaded Yosemite this evening. I downloaded o.k., it installed o.k. and then it restarted the Macbook and now it seems frozen. There is nothing but a grey screen, the apple logo and a bar that is half black

Hi, I downloaded Yosemite this evening. It downloaded fine, it installed fine and then it restarted the Macbook. Now it seems to be frozen. I have nothing but a grey screen with the apple logo and a bar that is half black and half grey. It's been like this for over an hour. Should I worry or is it still working at something? How do I fix this if it's not still working at installing something. Thank goodness for this poor old pc as backup.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Is there has limit about iPhoto to export the slide show

is there has any limit how many picture can i make a slide show to export??? about 68 is it okay??

You could use the iPod AV cable only and connect the yellow colored RCA jack to the yellow colored RCA input socket on the projector. If your slide show is photos only I suggest you transfer your photos at "full resolution". This takes up more room on your iPod but when you project your images on a large screen you may be more happy with the outcome. With your iPod connected to your computer select your iPod under "Devices" in iTunes and click on the "Photos" tab. Click the box that reads "Include full-resolution photos".
hope this helps
DL

I purchased a season of a tv program. my library use to show how many episodes were in there. now nothing. when i click on the picture the episodes show up but with 2

My library in itunes use to show how many episodes of Eureka season 5 i have. Now there is no number in the top right picture of the TV show. When I click on the picture it shows what episodes are in there but it has 2 # 13's. How do I correct this if at all possible?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

HT3180 My Apple TV keeps showing on the TV screen a white cable coming from the Apple TV to ITunes. There is nothing at all coming from the Apple TV unit itself - no flashing light, nothing. We have connected to the Apple computer - no success.

My Apple TV has been working perfectly until last night. It now shows on the TV screen a white cable going from I Tunes to the back of the Apple TV. When we connected this to the computer using a micro cable the Apple TV isn't showing anywhere on the ITunes sight. When a search is done it doesn't come up at all. It's as if the Apple TV is dead. Not sure what to do as this was the last attempt at restoring its settings as per instructions.

Did you follow the steps exactly? Removing all cables, then connecting via micro usb. If you have a 3rd gen device you need to connect the power following micro usb.
http://support.apple.com/kb/ht4367

Question about filter-mappings in the web.xml

I'm a bit new this so apologies if this is a stupid question but want to write a filter mapping that captures /image/<identifier here> and /image/<identifier here>/size/<size here>
I would have assumed <url-pattern>/image/*</url-pattern> would do this but it doesn't. When I try a URL with /size/ in it, I get a File not found error.
So I tried adding a second mapping that uses <url-pattern>/image/*/size/*</url-pattern> and that doesn't work either.
What would be the best way to write a filter mapping that captures both /image/<identifier here> and /image/<identifier here>/size/<size here> ?

Thanks for the reply.
I did end up doing something like that in the end. I think I just couldn't get my mind into gear as usual on Monday.
What's happening is taking a nice neat human readable URL and converting it to the horrible URL used by the system. The reason it's a filter is because someone had written a tiny filter would might only execute 20 lines of code and I think someone felt it was easier to just lump about 240 more lines to execute on each request, which, even if it isn't a huge strain on the system it's nasty and most of the code is unnecessary the vast majority of the time. I'm splitting it up the whole lot based on the various tasks.
This particular functionality could be a servlet. I probably would have done it that if given the task from scratch but I think sometimes I put too much faith in the fact those with more experience should know better. I think I'll try it as a servlet and if someone has concerns about it then I'll ask them to explain to me why it can't be one.

I tried private browsing not too long ago and i cannot remember a cool website i visited. Is there any way that I can access the web history?

Well I have a lot of people over and I recently got stumble. I don't like them seeing the things I have looked at because some of it isn't very tasteful. There was one site that I stumbled on and now I can't remember what it was. Is there anyway for me to retrieve the lost history?

Well I have a lot of people over and I recently got stumble. I don't like them seeing the things I have looked at because some of it isn't very tasteful. There was one site that I stumbled on and now I can't remember what it was. Is there anyway for me to retrieve the lost history?

Is there a way to view videos on the web, with my Pre?

smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

If you have the camera connection kit you can view thumbnails. but you can only view them full sized if you import them onto the ipad.

There is no bar to type in the web address

no details

hello, please make sure that the navigation toolbar is shown and/or restore the default user interface set as it's described in [[Navigation buttons like back, home, bookmarks and reload are missing]].

Save for the web seq

I need to save for the web an animation of about 100 frames. The problem is the only way to do that seems to be saving the file as a gif but I need to keep them frame by frame. I was wondering if there is a way to save for the web the entire sequence and keep it as a jpg or png.
Tx

Simply render the animation to whatever format you find suitable using File --> Render Video, then convert the result using batch processing.
Mylenium

After installing Adobe After Effects CC the web browser crashes

Hi,
I don't know where to turn with this so I'm trying as many possibilities as I can think of:
I installed After Effects CC on my PC. I then noticed that a web page that I created incorporating a virtual tour stopped functioning properly. It doesn't matter which computer I access it from. I haven't done anything to this web page but it has just stopped working properly after I installed After Effects CC. If I use Chrome a Shockwave Flash has Crashed message appears:
I've tried creating a similar page but the same problem occurs:
I've checked Chrome using the phrase about:plugins and tried disabling one of the two Adobe Flash Player plugins to no effect
I've contacted my internet service provider and they have assured me the problem is not connected to using their service
I have contacted the company which provided the virtual tour software and sent them a copy of the file that I included in the web page. There has never been any problem with the web page before
I also tried uninstalling and downloading a more up to date version of the Panotour Tourweaver software but still the same problem occurs.
I've tried recreating the page but the browser (IE, Firefox and Chrome) crashes on whichever computer I'm accessing the webpage from
So I wondered if the problem is connected the creative cloud?
No matter what computer I use the browser crashes when I click on a button within the webpage (which normally opens another webpage that I created). I haven't touched any of this and it has always worked perfectly. The only thing I've done recently is to download the Adobe After Effects CC app and then the problem occurred.
Any constructive advice would be appreciated, thanks

Update - I've now tested this with different internet connections, different computers and different operating systems. I've also just received a response from my internet service provider who said:
"I've tested in Firefox, and it looks as if the buttons are crashing the browsers' flash plugin. This being the case, it is not going to be anything related to your computer, the internet connection, or the web server.
In all likelihood, it will be an issue with how the flash tour is coded, which I presume is created automatically by the Tourweaver package you mention. You will need to pursue their support for advice on this problem as it is something with the flash file)s( which isn't working correctly."
So, hopefully Easypano support will be able to fix the problem. Obviously no connection at all with Adobe After Effects

There is nothing about MS-7311 on the web?!

Similar Messages

Maybe you are looking for