There was an error in submitting your podcast

Like a number of folks who have been sharing their experiences with the configuration and use of Podcast Producer 2, I have a tale to tell. After a number of reinstalls of SLS on my new Mac Mini server, I couldn't get past the message in the subject line, when using Podcast Capture. While searching this forum, I came across a couple of references to making sure the "tunnel" options were properly configured in the member_preferences plist. When I looked at mine, there appeared to be the right references to my FQDN, so I thought this was another dead end for my problem. I decided to google "tunnel" and Snow Leopard Server, and one of the things that showed up in the installation and setup worksheet was:
Your AirPort Extreme Base Station or Time Capsule must have its Connection Sharing option set to “Share a public IP address” (that is, an Internet connection). In addition, the advanced option IPv6 Mode must be set to Tunnel.
I remembered that I had set up the server to administer my Time Capsule, but I hadn't checked this because it seemed to be working fine; but, my IPv6 mode was set to something else. I selected "Tunnel" and saved and restarted the Time Capsule.
Next stop was to try Podcast Capture again.
It worked!
I don't know if anyone else will find himself on this path in the future, but if so, I hope this information is useful.

Hello CultureTV, and welcome to the AppleBoards,
Since your problem isn't Xserve specific I think you'll probably be much better served in the Podcast Producer discussion group.
The 10.5 is here: http://discussions.apple.com/forum.jspa?forumID=1240
The 10.6 is here: http://discussions.apple.com/forum.jspa?forumID=1355
Good luck,
=Tod

Similar Messages

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

My Jawbone Icon pairs with my MBP but then has an error (There was an error connecting to your audio device...). Is there a fix for this?

See Question...MacBook Pro Lion 10.7.1 and Jawbone Icon not working correctly.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

There was an error processing your request

I am testing acrobat.com and successfully uploaded a 50mb
file. I received the email, I click the link and go the web site.
When I click on the download button I get a webpage with the
following message
There was an error while processing your request:
The requested file is being scanned for viruses.
Any assistance would be appreciated.
Ian

Hello Ian,
Thank you for your post.
Once you upload files, they go into a queue to be virus
scanned. You will see the virus alert message until they have
successfully been scanned, and this does not necessarily happen
immediately (it can take a little time).
If you have waited a while and you are still having trouble,
please let me know.
Thanks,
Michelle

There was an error submitting your podcast

We have installed Podcast Producer 2 on a demo 10.6.2 server. We are able to use Podcast Capture directly on the server and podcasts are produced and able to be accessed through the Podcast library.
But when attempting to use Podcast Capture on a 10.5.8 client, after logging in and recording the podcast, when publishing we get the following message from Podcast Capture:
"There was an error submitting your podcast"
Some things I have noticed from the Server Logs:
Apache Error Log:
[Wed Feb 17 09:14:29 2010] [warn] RSA server certificate CommonName (CN) `demomaster.nobl.k12.in.us' does NOT match server name!?
[Wed Feb 17 09:14:30 2010] [warn] RSA server certificate CommonName (CN) `demomaster.nobl.k12.in.us' does NOT match server name!?
[Wed Feb 17 09:14:30 2010] [notice] Apache/2.2.13 (Unix) mod_ssl/2.2.13 OpenSSL/0.9.8l configured -- resuming normal operations
Our servername is demomaster.nobl.k12.in.us, but our local hostname is demomaster.local. Would this be a problem? changeip -checkhostname shows "success"
From the Application Log:
Processing SubmissionsController#createforfile (for 10.12.12.60 at 2010-02-17 09:16:36) [POST]
Session ID: d01cfcdf22d9d9c541cad23337cbe193
Parameters: {"workflow_name"=>"Sample Workflow", "submission_type"=>"file"}
Rendering default/failed.xml.builder (401)
Filter chain halted as [:authorize] renderedorredirected.
Completed in 148ms (View: 20, DB: 0) | *401 Unauthorized* [https://10.0.12.41/podcastproducer/submissions/createforfile]
The 401 Unauthorized also shows up even when we use podcast capture directly on the server. But the podcast still works then. So I'm not sure this is really an issue.
I have a feeling this is some sort of permissions issue, but I have tried changing the permissions on the /var/pcast and /var/pcast/server folder
http://www.sysarchitects.com/node/92
And I have turned off digest authentication in cluster_preference.plist as well with no success.
http://support.apple.com/kb/HT3899
Any other ideas? We really need to get this working. Thanks for any help.

I keep finding a little more information...
The plist file of the podcast that was to be uploaded looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>cachedmetadatafile</key>
<string>/Users/admin/Library/Application Support/pcastuploader/metadata/3FE7240F-7E9A-409D-A2F5-CEF2E15FA1C5.plist</stri ng>
<key>checksslcert</key>
<string>false</string>
<key>content_paths</key>
<array>
<string>/Users/admin/Library/Application Support/Podcast Capture/LocalAudio-2010-02-17-101316.mov</string>
</array>
<key>created_at</key>
<string>Wed Feb 17 10:13:34 -0500 2010</string>
<key>deleteafterupload</key>
<string>true</string>
<key>estimatedtimeleft</key>
<string>0</string>
<key>filecopypath</key>
<string></string>
<key>ftpuploadurl</key>
<string></string>
<key>httpsuploadurl</key>
<string>*https://demomaster.local:8170/cgi-bin/pcastupload.cgi<*/string>
<key>originalmetadatafile</key>
<string>/Users/admin/Library/Application Support/Podcast Capture/submission-9398F39D-357E-4509-AAF5-A5BCFA16A931.plist</string>
<key>percent_done</key>
<string>0</string>
<key>recording_uuid</key>
<string>FBDB1CF7-CDDD-40DB-AA79-30207DF7D1E3</string>
<key>server_url</key>
<string>*https://demomaster.nobl.k12.in.us:8170/podcastproducer*</string>
How do I change my server so that it uses the FQDN "demomaster.nobl.k12.in.us" everywhere instead of sometimes using the local hostname demomaster.local.
It appears this is a DNS issue. We have set the hostname using scutil and running changeip -checkhostname shows
Current HostName = demomaster.nobl.k12.in.us
DNS HostName = demomaster.nobl.k12.in.us
The names match. There is nothing to change.
dirserv:success = "success"
nslookup on the ip shows that the reverse is working and pointing to the FQDN.
Computer Name in Server admin is set to: demomaster.nobl.k12.in.us
Local Hostname is set to: demomaster
but under the podcast Producer overview screen in Server Admin our Podcast Library and Capture URL both show http://demomaster.local:port instead of the FQDN.
How do we change this?
Thanks again.

Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
Is this an Apple problem or with my server Netfirms???

Yeah no sorry not the answer. I have my own online hosting unlimited space and bandwidth.
It seems to be linked to teh podcast image. It's very strange...

We could not complete your request. There was an error in the App Store. Please try again later. (13)

We could not complete your request.
There was an error in the App Store. Please try again later. (13)

I am having a similar problem. I get one of two errors: "We could not complete your request. There was an error in the App Store. Please try again later. (null)" OR "We could not complete your purchase INSTALL_ERROR_DISTRIBUTION_SIGNED_BY_APPLE".
I am having this trouble on a brand new MacBook Pro running OS X 10.7.1. My firewall is off and no virus software is installed.
I can download and update apps on a different computer using OS X 10.6.8 just fine.
Any other recommendations?

I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later." and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

Hello, constance132.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I could recommend when receiving error -50.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Jason H.

"We could not complete your itunes store request. The network connection could not be established. There was an error in the itunes store. Please try again later."

When I try to open the home page in my Itunes I get the message "we could not complete your itunes store request. The network connection is not be established. There was an error in the itunes store. Please try again later." It had been working just fine, in fact I had just purchased a song & edited my itunes account. Could changing the name on my account have cause the error message or is something else going on? This is a brand new computer.

I've got an Apple ID problem, too. All of the sudden in the midnight between August 31st and September 1st, the new apps I picked up on the App Store hung forever 'Waiting..' in my iPhone and never turned 'Loading'. When a substantial amont of time had passed, they reported, they 'could not connect to the App Store' and .. disappeared! Well what they told was not perfectly true because I could however connect to the store as I could browse and pick the apps, but the apps just didn't load. I tried to log into my account in iTunes on my Windows 7 laptop, too, and there got exactly the message in the topic title.
It appeared later my Apple ID did not completely fail because when I switched from my home WiFi to the phone 3G, everything worked just as nothing happened. Logically, this intimated my WiFi had flaws. Or, some place between my WiFi router and Apple servers did, to be precise. My router was not to blame because I did no changes to it whatsoever.
All right, it is Saturday today and my ISP is running in unmanned mode meaning no hotline, but I call them on Monday unless the problem disappears by itself. I just wonder what I say, because from non-i-world point of view everything works well, and I know for sure guys in the ISP support don't own any i-stuff, (because they are all android fanatics) . I'm not telling them my Apple ID to let them reproduce the problem on their home equipment, which means I come almost totally proofless.

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

"There was an error downloading your purchased music. The disk could no..."

I am trying to download a Video from the new iTunes 6 and I do have an iPod Video, but for some reason everytime I check for purchases to download it, I get this error message: "There was an error downloading your purchased music. The disk could not be read from or written to."
For some reason the Apple Team cannot seem to help me with this, does anyone have any idea what is going wrong? I have purchased the video about 1 1/2 ago and no one has helped me from Apple yet. Please let me know....Thanks so much!
iPod Video 60 GB Windows XP Pro

I had this same issue today. I was able to download songs but not videos. It turned out that the machine that I was downloading on was my work machine and my music storage location was redirected to my company server. The path was
\\Rgafiles-2\bcross$\My Documents\My Music\iTunes\iTunes Music
I suspected that this redirection was an issue so I installed iTunes on another maching and was able to successfully download the song locally. I then copied the .m4v file to my original machine.
Dell Latitude Windows XP Pro

Very Strange Error Message. "There was an error downloading your.......

There was an error downloading your purchased music. The disk could not be read from or written to.
Does anyone know what this means? I purchased 2 films and cant watch them ;( I wonder if I will be charged??????

I have the same problem, It says error(-50) right? but i tried to buy 3 diffrent songs to see if it would work on any of them but it didnt and i got charged for them.Whenever i go to "advanced" tool bars and click on look up purchased music it tries to repurchase my music but it never works.Can anyone help? = ]
-Riahx
Windows xp Windows XP

My iphone 4 with 4.3.3 upgrade to 5.1.1,it said to me I should active it,I buy a active-card but it say 'Your request couldn't be processed.We're sorry, but there was an error processing your request. Please try again later.' What's wrong with my iphone

my iphone 4 with 4.3.3 upgrade to 5.1.1,it said to me I should active it,I buy a active-card but it say 'Your request couldn’t be processed.We’re sorry, but there was an error processing your request. Please try again later.' What's wrong with my iphone

It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
Was it?

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

HT204266 Apple I Need Help (We could not complete your request. There was an error in the App Store. Please try again later. (100)

I Want To Download Paid Apps It Says (We could not complete your request. There was an error in the App Store. Please try again later. (100)
What Should I Do Tell Me Please I Went To Youtube To Find Any Tutorial And Its All Just CRAP So Please Give Me A Solution
Today Sunday 14 2013 I But To 10 doller Gift Cards And I wanted To Download Grand Theft Auto:San Andreas And It Said First Click OK to confirm that you are 17 or over. Your content will then begin downloading immediately. i Clicked Ok Then It Said
(We could not complete your request. There was an error in the App Store. Please try again later. (100)
Then It Said For assistance, contact iTunes Support at www.apple.com/support/itunes/ww/
And I went To The Link and it Said Nothing About Error 100 Soo I Dont Now What To Do One Of The Tutorials Said That You Have To Agree To The Terms And Conditions Soo I Found The Terms And Conditions At Itunes The App That Comes Allready Installend On Your MacBook Pro At The Bottom Left And When I Clicked On It It Got Me To A Link To Your Website And The Terms And Conditions You Cant Agree Just Read Them ONLY You Cant Agree Soo Apple
PLEASE TELL ME

Error
what is error code 1009?

There was an error in submitting your podcast

Similar Messages

Maybe you are looking for