ThinInstaller doesn't install all components

Hi there
I have a problem using ThinInstaller in combination with SCCM. I downloaded a few components using UpdateRetriever for the ThinkPad T450. During a SCCM Task Sequence a install those components using the following command:
"%ProgramFiles(x86)%\ThinInstaller\ThinInstaller.exe" /CM -search A -action INSTALL -repository "\\UNC\PATH$" -noicon -includerebootpackages 1,3,4 -noreboot -log "C:\Temp\ThinInstaller.log"
This works without any problems, but the WiFi and the Intel Management Engine Interface Drivers don't get install. Those two components have the same state than all other drivers in Update Retriever.
If i manually install those two Installer from my UpdateRetriever Share it works without any problems. Does anyone know why this occurs?
Thanks!

Intel has changed the design of their Intel MEI driver package so that it apparently will not install in a scripted manner running under Local System. I bet if you check the log file from ThinInstaller you will see that it got a 1603 return code when it ran the Intel MEI installer. I've seen others run the SetupME.exe from that package with a -extract command line parameter and get the MSI files. If you are not using the AMT features in your environment, you can get the two driver-only MSI files for SOL and MEI and add those in SCCM as an MSI package and that seems to install fine.
For WiFi, I believe a new driver was recently made available. You may want to search again in UR and make sure you have the right package. Also, if it is the Intel 7265 you need to install, the Intel Wireless 7265/3160 has a co-requisite dependency on the Intel 7265 Bluetooth Driver (j5b206ww_764). You need to also have this package in your repository. Other than that we would have to go through the TI log file to see why it did not install.

Similar Messages

Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y

Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y

restart installation and pick whatever options you want to install.

Clients Agent no longer installing all components properly

I attempted an upgrade to R2, but it failed, so I reverted back to a VM snapshot before the upgrade attempt and all is well except for installing the client during OSD.
The imaging process works fine, but once complete the agent isn't listing all the Components as installed or enabled:
1) CCM Notification Agent: Disabled
2) Most of the components that should have a status of Enabled are listed as Installed.
On top of that I'm running SP1 CU2 (5.00.7804.1300), but the newly imaged devices list all components as SP1 base (5.00.7804.1000).
I checked the LocationServices.log file on a client and after a few failed attempts to reach my MP it eventually finds the MP and connects using HTTPS (we use a PKI cert).
I reinstalled the MP by deleting the role, waiting, rebooting, adding it back.
What else can I do? I'm thinking I'll try installing CU5.
So in short the client no longer completely installs, which prevents any WSUS updates or Software from being installed post OSD.

I only see errors under 3 components:
SMS_NETWORK_DISCOVERY:
Network Discovery failed to connect to a DHCP server due to a connection error. (Network Discovery can communicate only with Microsoft DHCP servers; if you do not use these servers, you can ignore this error.)
Solution: If you are using Microsoft DHCP servers, then refer to the specific error string for details. This error message means that fewer clients and networks will be found than otherwise. Note that this message will not be generated again during this Network Discovery session, regardless of how often the error occurs.
SMS_MP_CONTROL_MANAGER:
Management Point encountered an error when connecting to the database CM_SITECODE on SQL Server sccmDatabase.domain.local. The OLEDB error code was 0x80004005.
Possible cause: The computer running SQL Server is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the SQL Server is turned on, connected to the network, and functioning properly.
Possible cause: Management point does not have sufficient access rights to the database.
Solution: Verify that management point computer account or the Management Point Database Connection Account is a member of Management Point Role (msdbrole_MP) in the SQL Server database.
Possible cause: Network problems are preventing the management point from properly accessing the SQL Server.
Solution: Investigate and correct any problems with your network.
Possible cause: The management point having problems is at a secondary site, and SQL access account being used was recently reset by the parent site.
Solution: This can automatically repair itself after one hour , as long as the account in use is not locked out. Check that the account in use is not locked out. Instead of waiting an hour, you can stop and start the SMS_SITE_COMPONENT_MANAGER service to immediately apply the new configuration.
Possible cause: The SQL Server Service Principal Names (SPNs) are not registered correctly in Active Directory
Solution: Ensure SQL Server SPNs are correctly registered. Review Q829868.
Then when I attempt the SCCM upgrade I see a lot of USMT and Boot Images fail to upgrade:
Error connecting to WMI while getting remote system drive. Configuration Manager Setup 1/7/2015 4:05:27 PM 5072 (0x13D0)
WARN: Failed to create USMT package instance - ConnectServer failed. Will retry in 10 seconds Configuration Manager Setup 1/7/2015 4:05:27 PM 5072 (0x13D0)
ERROR: Failed to create USMT package instance - ConnectServer failed. Configuration Manager Setup 1/7/2015 4:07:57 PM 5072 (0x13D0)
Error connecting to WMI while getting remote system drive. Configuration Manager Setup 1/7/2015 4:08:58 PM 5072 (0x13D0)
ERROR: Failed to create SMS_BootPackageImage instances - ConnectWmiNamespace failed. Will retry in 10 seconds Configuration Manager Setup 1/7/2015 4:08:58 PM 5072 (0x13D0)
ERROR: Failed to create SMS_BootPackageImage instances - ConnectServer failed Configuration Manager Setup 1/7/2015 4:11:28 PM 5072 (0x13D0)

MF60 Pull List doesn't show all components in the BOM

I just switched to REM and use MF60 for replenishment. I have some products that use 2-3 FGS in the BOM. While MF60 lists out requirements for components, it does not list any requirements for FGs in the BOM. For eg product Y contains A (FG) and B(comp). However when I run MF60, it shows me to pull only B even though A is missing. I would appreciate if someone can help.

Dear KB,
What's the specific reason for treating A as a finished product and why to include A under the BOM of Y(Finished Product)?
Check if there is sufficient stock for A, already in the required production storage location,in this case the system does not
show the material A in the missing parts for staging.
Check and revert back.
Regards
Mangalraj.S

Tried all different methods to install iTunes and it's still not working. I've uninstalled and re installed all components individually and it still refuses to work.

I believe it's due to the Apple Application Support program only being 32 bit...Which is quite stupid if you ask me. You release everything as 64 bit, yet forget to update the Application Programming? Good job for a multi-billion dollar corporation! Now how about you find a work around to this issue instead of copy pasting the same stupid troubleshooting links for us?
Sincerely,
A ****** Customer

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

SAP GRC 5.3 - Do I need to install all tools initially

Hi,
I am looking into installing SAP GRC 5.3. At the moment we only want to use Risk Analysis and Remediation (RAR), Superuser Privilege Manager (SPM) and Risk Terminator. However we may want to implement CUP and ERM at a later stage as part of a seperate project. I am looking for some advice on how we should approach the install. Should we install all components initially or can they be easily installed and configured at a later stage?
Thanks,
Gary

Hi Gary,
SAP GRC Access Control comes with all four components like RAR,CUP,ERM& SPM.According to your organization's need you may configure the components which you want initially. Later on you may plan to configure other components.
I am looking for some advice on how we should approach the install. Should we install all components initially or can they be easily installed and configured at a later stage?
It's recommended by SAP to deploy all four components.
Regards,
Mohit

I installed a mxp and it doesn't appear in components panel

Hi,
I have a new Mac Pro, an Adobe Master Suite and when I installed a mxp component it doesn't appears in components panel.
The Adobe Extension Manager is the latest too.
All is in engliish.
I installed also the Flex Component Kit and the same occurs.
Teoricly it is so simple.... just double click the mxp file and Adbe Extension Manager opens and register.
How can I fix it?

What book?
An ibook?
Or an audiobook?

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3. All components install except InDesign. Is this an installation disk problem or is it not compatible with the OS?

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3 Design Premium. All components install except InDesign. Is this an installation disk problem, or is there a compatibility problem with the OS?

I fear that you are trying to download OLDER Software on a newer Operating Sysytem Meaning that you need to Install the Latest Version of Adobe on the Newer Operating System for it to work Properly. Be sure to always check the minimum System Requirements.

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Hp 6525 all-in-one doesn't install correctly

Hello and hope you can help me. I tried looking for the answer to my problme in previous forum posts but couldn't find anything useful for me.
I bought the printer one month ago, I installed it without any problems (wireless) but at one moment, I couldn't use the scan function. I had to use the USB connection to do it. I thought about uninstalling amd reinstalling but more problems appeared. Now I can't install all the features, the scan function doesn't work wirelessly, not to mention eprint. I deleted all the HP registry keys before reinstalling the software, still doesn't work. When I get to the checking network environment, the program blocks. The printer is connected to the wireless network, it even prints documents.
Please, can you help me?
This question was solved.
View Solution.

Hi @ionelaiordan
I understand you have already uninstall and tried installing, but the steps below may resolve the software issues you have expressed;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstalling the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
Image source
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Please let me know the outcome of these efforts.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Parameters for a succesful silent install of iTunes 7.6 with all components

Hello people
I want to use the silent install of iTunesSetup.exe to use it in a unnatended DVD installation. I use a multiple options using the /? command but it doesnt install all the componentes (bonjour, quicktime, ...):
iTunesSetup.exe /quiet /norestart
Someone knows what parameters i have to use to do it??
Thanks!!!

I want to add that the missing music files are not in my recycle bin.

Installed cs6 master collection wont install all the components for photoshop , after effects or FB yet everything else is fine

installed cs6 master collection wont install all the components for photoshop , after effects or FB yet everything else is fine

Alanh61734259 are you receiving any specific error messages in the installation log files? You can find details on how to locate and interpret the installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6, CC. You are welcome to post any specific errors you discover to this discussion.

I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

Greetings,
Here's a direct link to the drivers you need, they should work perfectly for your situation.

Can't reinstall CS3. "All Components Fail to Install"

I had been running CS3 on Windows Vista 32. First received, out of the blue, the dreaded error that licensing had stopped working. Was not able to rectify by the long list of ususual means. Finally was instructed by adobe tech support to uninstall CS3 and reinstall. Uninstall apparently successful (confirmed with Microsoft Fixit Tool that did find and fix some registry errors). Can't reinstall CS3 either from DVD or from desktop. Receive status report after install script finishes: "All Components Failed to Install." I have spent over 23 hours on this problem to no avail. PLEASE HELP!

Thanks for the reply, but I did all that already. After much research and seeing what's worked for others, below is a rundown of what I've already tried... (much of my process below came from http://na-na-sa-ra.blogspot.com/2008/06/how-to-re-install-adobe-cs3-after.html which I too had found and had hoped would help.)
After attempting to uninstall CS3 from the control panel, I ran the Adobe CS3-5 cleaner, numerous times selecting various listed options during the script run. After running each time, I ran the MS Fixit tool (http://support.microsoft.com/mats/Program_Install_and_Uninstall) that reportedly will "fix problems with programs that can't be installed or uninstalled". After each run of the MS Fixit tool, I attempted to reinstall CS3 - the install script would run for a good long while, showing (slow) progression of a status bar, but in the end give a status report saying that all components failed to install. Even though complete installation failed, Adobe CS3 would be on the list of programs in the control panel, so I would repeat an "uninstall" from the the control panel, and rerun the MS Fixit tool. Sometimes the MS Fixit tool would find/correct problems, othertimes it would report that no problems were found. I repeated this procedure for all the options given in the CS Cleaner Tool script without success. Thinking it might be a problem with attempting to install from the DVD (which has never been a problem before), it was suggested to try installation from the desktop (copied all DVD files to a desktop folder). Repeated the entire above process using the "desktop files" instead of the DVD. No luck. (...and phoning Adobe tech support was not productive - they sent me here to the forums.)
Really appreciate you trying to help. Have any other suggestions?

LE 8 doesn't see all of my installed Jam Packs

Just setting up a new mac. I installed all the Jam Packs. After that I brought up Garageband and when I click on "Loops" it show the following list. I did notice that when Garage Band came up, it indicated that it was searching for Jam Packs...
Garage Band
iLife Sound Effects
Jam Pack Remix Tools
Jam Pack Rhythm Section
Jam Pack Symphony Orchestra
Jam Pack Voices
Jam Pack World Music
I then installed Logic Express 8. I launched it and when I click on "Loops", I'm missing 2 of the Jam Packs. I only see:
Garage Band
iLife Sound Effects
Jam Pack Remix Tools
Jam Pack Voices
Jam Pack World Music
Can I drag the missing Jam Packs on to Logic? I don't want to make copies, just want them to be seen there.
Please advise.
Thanks

One more observation. I tried dragging just one file over from the Orchestra folder (Academy Cello 01). I then searched for it and found it. I then searched for "Academy Viola 01", but it didn't find it. I ended up dragging over the set of 5 Academy sounds and now if I search for just "Academy" to all show up in the search results. The only bad thing is I don't actually see the "Symphony Orchestra" pack in the list. I guess I can live with that, but it would be nice to see them all there, just so I know which ones I have. Dumb, I know...
If you know of any other way, please let me know.
Thanks again for your help!

ThinInstaller doesn't install all components

Similar Messages

Maybe you are looking for