ThinkVantage Access Connections and Limited User Account (LUA) on XP SP3

Is it really so that one has to be logged on with at least Power User privileges to get the Access Connections utility working properly with 3G/HSDPA? When logging on as a Limited User, the computer can find all the cell phone operators nearby but does not let to do a connect. But when logged on as a Power User, all problems go away.
I would not like to bump up my user privileges from Limited User to Power User, since all else seems to work fine with a Limited User Account. Any ideas about what is going wrong -- or did I just hit into a wall here?
The environment in question is Thinkpad X200 and XP SP3. Access Connections and the HSDPA driver are the latest ones I could find from the Lenovo driver download site (Access Connections v. 5.21, Ericsson HSDPA driver v. 1.0.1046.221).
Would there be any other way to use 3G connections than to use the Access Connections utility (without changing to another o/s)?
--sami

Hi Sami,
I just got stuck on the same problem as you and following is what I found in details fro ThinkVantage Access Connections version 5.30. Hope this helps.
Jakub
<Limited User>
A Limited user can create and apply only modem profiles. However, if
Administrator sets "Allow Windows users without administrator
privileges to create and apply location profiles" option in the
Global settings then the user can create and apply any kinds of
profiles in the system.
Also, a limited user cannot:
1. Edit setting for the Automatic Ethernet and Wireless location
profiles switching.
2. Edit Global settings.
3. Edit profiles created by another user in the system.
4. Renew or release IP in the Diagnostics panel.
5. Export profiles.
The limitations on Power user also apply on Limited user.

Similar Messages

M70: Permissions, wallpaper and limited user

Hi,
I have spent some time (i.e. a few days of mucking around) setting up a new M70 (PSM70A-T00E) notebook which has WinXPSP2 preinstalled (on an all-but-useless recovery DVD without the alleged "expert" option, but that's another story).
When Windows was first installed, I configured the (default) administrator and one user account (called "aburdeni"). By default, both accounts had administrator permissions.
After setting things up the way I like them, I am now trying to convert the user account to a limited account.
The usual method of "control panel->user accounts->...->change account type" doesn't work as it claims that there is only one account on the system (even though there's the one with the username "administrator", which it ignores for some reason).
To override this, I logged in as administrator and ran lusrmgr.msc. I then added user "aburdeni" to the User group and removed them from the Administrator group.
Things broke.
What I have noticed now is that:
* The default Toshiba theme doesn't stick (no wallpaper, just a plain grey backdrop)
* Control panel reverted back to the default hierarchical style, and clicking on the give-it-to-me-the-way-I-like-it text on the left-hand side didn't do anything.
* Other settings (taskbar, start menu style) reverted back to the default.
There are probably countless other things that broke, but I have yet to find them.
Setting the account to Power User instead of User made no difference. Things only started working again when I added the account back into the Administrator group.
Is there any way to have things work while logged in as an unprivileged user?
Thanks,
Adam
BTW: I'm from Australia, if that makes a difference (different settings for the default install?)

Hello Adam
As far as I know there is no difference in which country you live because operating systems are the same for all countries and some different settings depending on country are not known to me.
Please delete all created accounts. Log in as administrator and then create a new account. First step is to give the name for this new account and click on Next. Second step is to define this user (administrator rights or even limited user). Choose limited option and end the wizard.
Use Windows + L key combination and try to log in as limited user. There should not be any problem. The background picture and everything else will be set like for the first time.
You can make a small test and try to start Toshiba power utility. You will see that there is no chance to start it and change anything. It can be used just by administrator.
Please try again. It must works.
Good luck!!!

Officejet pro 8500 a909g, limited user accounts can't use printing preferences

The above discription explains most of it. I had install this 8500 printer, then shortly after, uninstalled the other two older printers I was previously using. That is when the problem started. I can not access printing preferences from a document or from control panel\printer and faxes. But I am able to access from the administrater account. I did an online chat with HP help and what we did made sence, but did not work. We went into the security tab in properties and added the limited user account for all permissions and reboted the computer. Did not work!!!! I have a dell laptop, windows xp pro, and the printer software is now uninstalled. the window that pops up when I click on properties is: Function address 0x50085a97 caused a protection fault. (exception code 0x0000005) Some or all property pages may no be displayed. I don not have this problem as an administrater only as a limited user.

I had this similar problem. Installed this printer a few months back and for some time it was printing fine. Recently, I changed the default preferences to black/white, draft, low ink etc etc. Now if I click on the Properties I get this same window:
*** (x50085a97 caused protection fault (exception code 9xc0000005 some or all property pages could not be displayed) ***.
Running XP on an Dell Intel Pentium and it happens irrespective of the application I am using - usually firefox or staroffice. 9 times out of 10 I can't change the properties, but occasionally it allows me too then reverts back. So now I am stuck with everything printing black/white as that's the default I set! Any suggestions welcome.

9.3.0 File association "icon" in XP Pro limited user account problem?

XP Pro SP3 all MS Updates.
Problem occurred after updating Adobe PDF reader to 9.3.0 via the program update feature
File association ok but weird thing is on Limited user account. The icons for a PDF file are not Adobe ones it is a generic one. If I try to open the file it opens with the correct program.
Problem evident on desktop icons and in looking in windows explorer.
If I attach a file in my email program (Outlook Express) it shows the correct icon.
These files were created from various pdf creators. Ofice 2007 Mac SO X 10.4.11 Quartz, Adobe InDesign CS4 (6.0) and InDesigdn CS4 (5.0) so it doesn't seem matter what program created the files.
I am at a loss to figure out how to get the correct icon in the Limited User Account. The correct icons show up in the Admin account. Note the files do open with the adobe reader.
Thanks
Celeste

Gosh anyone out there have any idea how to resolve this? The generic MS icon for the files in the limited user account is annoying as all get out. Anyone out there from Adobe or is this not a monitored forum. Not sure. Thanks
Note: Correct program is accessed just the icons for the PDF files in the limited user account are the generic MS ones.
Celeste

Can I downlaid Firefox on my Administrator account but have it not be accessible to the Limited User Account?

I have Windows XP and want to know if I can download and use Firefox on the Administrator account only and it not be accessible to the limited user account. The reason is is we don't want our kids having access to to more than one tab at a time. any suggestions?

Yes you can,
# locate firefox.exe file in a directory similar to C:/program files/mozilla firefox/firefox.exe
# right click it, select '''properties'''
# add access to your account and remove any entries for other accounts you don't need.
Please let us know whether that works for you.

Why don't java applets run when using Firefox 4.0 in a windows limited user account?

Java applications will not run in Firefox 4.0 when the windows user/process only has limited user access rights. The systems, I see this behaviour on have Windows XP Pro SP3, Firefox 4.0 and JRE 1.6.0_24 installed. The java application will run when when full administrative rights are present. This issue did not occur with the 3.6 firefox version that was previously installed.

The problem also exists with the newer Firefox 4.0.1 and Java 1.6.0_25 versions.
Enabling administrative rights resolves the issue ... though this defeats the purpose of using a limited user.
The underlying bug appears to be in the Firefox java plugin detection code. The issue is related to the detection code requiring write access to the HKLM\SOFTWARE\mozilla.org windows registry key. The limited user only has read access for this registry key. The behaviour was identified using the Sysinternals ProcessMonitor utility ... showed firefox calling an interface to create the registry key and getting an access denied response in the limited user case.
A more targeted workaround for the issue is to grant the limited user write access on the HKLM\SOFTWARE\mozilla.org windows registry key. This avoids the need to grant administrative rights to the user and enables the java plugin to be detected. That is, it works on the 2 XP systems where the java plugin wasn't being detected in limited user accounts.

Why won't Fire Fox 34.0.5 restart in limited user account ?

FF 34.0.5 crashed while in the limited user account and won't load when I try and restart it. FF will load and start when I use the admin account with no problem(s). I've uninstalled and re-installed FF 34.0.5 twice but the limited user account still will not restart/load. FF will start in admin account after the re-installs.
When I try and restart/load FF in the limited user account and use Windows task manager to see if FF is loaded, task manager does show FF is loading into memory however the usual FF user interface/display screen does not appear and while the system tries to load FF, FF consumes major portion of memory (up to %99 sporadically). After several minutes FF will display the "error sending screen" but after FF closes, final/exit error message displays that FF was unable to send error details to Mozilla Support.
I'd prefer to try and resolve this problem w/out having to re-install FF from scratch (deleting FF folders, memory registry entries etc. etc. ) because I don't want to lose the current FF configuration (addons, extentions, synch info etc. etc.) I've set up using the limited user account.
I've switched to the Chrome browser temporarily but prefer FF.
Here's the crash report I copied from the "detail" crash report section (please redact email info if possible before posting question) . Thanks :
AdapterDeviceID: 0x2a42
AdapterDriverVersion: 7.15.10.1518
AdapterSubsysID: 145010cf
AdapterVendorID: 0x8086
Add-ons: jid1-ASMu9YBkP688TA%40jetpack:0.2.1,jid0-bbA9VAawX3LMWDu668aUDrpQVXU%40jetpack:1.0.0,%7B6140bbfd-aa20-11e1-aba7-109add603214%7D:1.6.9,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.6,jid1-BJLRspk01OAAzg%40jetpack:0.5,jid1-YvCVXxA75Ob1eQ%40jetpack:1.0,jid1-MnnxcxisBPnSXQ%40jetpack:0.2.5,fastestsearch%40mingyi.org:3.31
AvailablePageFile: 2471198720
AvailablePhysicalMemory: 168935424
AvailableVirtualMemory: 140570624
BIOS_Manufacturer: FUJITSU // Phoenix Technologies Ltd.
BlockedDllList:
BreakpadReserveAddress: 48693248
BreakpadReserveSize: 41943040
BuildID: 20141126041045
CrashTime: 1420502879
EMCheckCompatibility: true
Email: p&&&&&j&&&&@gmail.com
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1418173648
JSOutOfMemory: Reported
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a42, AdapterSubsysID: 145010cf, AdapterDriverVersion: 7.15.10.1518
OOMAllocationSize: 1
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 33503
StartupTime: 1420502497
SystemMemoryUsePercentage: 94
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 6565580800
TotalPhysicalMemory: 3172098048
TotalVirtualMemory: 2147352576
URL:
Vendor: Mozilla
Version: 34.0.5
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] DATAGRAM 0 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{849F5044-0498-477B-8D72-28EE4D2B3729}] SEQPACKET 3 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{849F5044-0498-477B-8D72-28EE4D2B3729}] DATAGRAM 3 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] SEQPACKET 6 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] DATAGRAM 6 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2B5D0F9B-5F42-4471-8299-3D8E5AB93687}] SEQPACKET 5 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2B5D0F9B-5F42-4471-8299-3D8E5AB93687}] DATAGRAM 5 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{9AA1DCBA-B641-46CA-942D-B1E6F112D0AC}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{9AA1DCBA-B641-46CA-942D-B1E6F112D0AC}] DATAGRAM 4 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{A7317EE0-B0B1-4815-861F-E7D47D2038B8}] SEQPACKET 9 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{A7317EE0-B0B1-4815-861F-E7D47D2038B8}] DATAGRAM 9 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D704FED5-D1F5-4859-8B7B-C3DEF3712C72}] DATAGRAM 1 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{849F5044-0498-477B-8D72-28EE4D2B3729}] SEQPACKET 8 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{849F5044-0498-477B-8D72-28EE4D2B3729}] DATAGRAM 8 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{6D1D7109-DDCC-43CE-AF62-42E679D9253C}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{6D1D7109-DDCC-43CE-AF62-42E679D9253C}] DATAGRAM 2 : 2 : 2 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] SEQPACKET 7 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{773EB279-D9E7-4A45-BB64-2F99268E9A53}] DATAGRAM 7 : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.

Looks like you cleaned up the email before posting, which is good.
Before experimenting further, if you want to eventually restore the last set of windows and tabs you had open before the crash, could you back up your session history files?
Since Firefox is closed, you can access your current Windows user Firefox profile folder by pasting the following into the search box on the Start menu (or the address bar of a Windows Explorer window) and pressing Enter:
%APPDATA%\Mozilla\Firefox\Profiles
From that point, double-click into the most recently updated folder.
''(Note to other readers: if Firefox is currently running, do not exit out, but instead open your current Firefox settings (AKA Firefox profile) folder using either
* ''"3-bar" menu button > "?" button > Troubleshooting Information
* ''(menu bar) Help > Troubleshooting Information
* ''type or paste about:support in the address bar and press Enter
''In the first table on the page, click the "Show Folder" button. This should launch a new window listing your current settings files.)''
(1) Scroll down and double-click into the '''sessionstore-backups''' folder. Copy all files here to a safe location such as your Documents folder.
(2) Go back up to the main level and scroll down to the sessionstore file(s). sessionstore.js usually contains your session data as of the last time Firefox exited normally. In this case, it might not be there. Go ahead and copy any other files whose names start with sessionstore and which have dates in a relevant range to a safe location such as your Documents folder.
By default, Windows hides the .js extension. To work with files most accurately, you may want to turn off that feature. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
The kinds of files you may find among your sessionstore files are:
* sessionstore.js: the windows and tabs from your previous Firefox session (created when Firefox closes)
* recovery.js: the windows and tabs in your currently live Firefox session
* recovery.bak: a backup copy of recovery.js
* previous.js: the windows and tabs in your last Firefox session, after Firefox starts; sessionstore.bak for pre-33 versions of Firefox
* upgrade.js-''build_id'': the windows and tabs in the Firefox session that was live at the time of your last update; sessionstore.bak-''datetime'' for pre-33 versions of Firefox
Okay, next steps in the next post.

Shockwave crashes system in limited user account

I am having a problem with shockwave content playing on my
system. I have followed every single step in this article kb403082,
except for formatting my system and reinstalling windows and
shockwave alone (atomic bomb option). I couldn't do step 5
completely because there is no FlexNet Licensing Service listed.
The problem is that when I am in my admin account everything
runs fine. When I install, play or open an application with
Shockwave content (ie, Bookshelf 2000), everything plays nicely.
When I log into my Limited User Account (Power User option when
created) and either open Bookshelf 2000 or open a website in IE7
with shockwave content then the entire system freezes and I have to
reboot.
I don't understand what it is about the limited user account
that is causing this, but it makes me believe that Shockwave needs
to access some system level component that is blocked in a limited
user account and it is causing the crash.
Thanks for any help,
Sashi
Windows XP Professional SP3 (all latest updates)
Internet Explorer 7
NVIDIA Geforce 8800 GT (180.48 drivers)
ASUS P5N-T Deluxe

Wow, I just fixed my problem. I had the latest drivers for
the video card, but NVIDIA just released a new set on the 22nd. So,
I just downloaded them and installed the new 181.22 and that fixed
it. I don't know if it was the new driver or just the process of
installing the new driver. I wonder what would have happened if I
reinstalled the same 180.48 drivers?
Either way problem solved. Odd.

Store access problems with different Mac user accounts

Hi,
My daughters account cannot connect to the iTunes store ONLY when she is logged into her user account on our iMac.
When logged into my user account she is able to connect to the store.
I can connect to the store if I log into my iTunes account when I am logged in her iMac user account.
Hope you are still with me!
I am running Mac OS X 10.5.2 & iTunes 7.6.2 (9)
The computers firewall settings are 'allow all incoming connections'.
There have been no changes to our netgear router.
As stated there is no ISP issue here as she can connect on other Mac user accounts and I can connect on her Mac user account.
I have deleted her .com.apple.iTunes.secure.plist
The error message -50 takes about 5 minutes to arrive after the 'accessing iTunes store' eventually stops. We have also had error -4 on one occasion.
It is possible to view her account details but when clicking on the iTunes store icon in iTunes it doesn't connect to the store.
I have deleted the existing iTunes file and downloaded a new iTunes file. I have changed the purchasing from shopping cart to one click in iTunes Preferences.
And I have emailed apple. Their reply hasn't been of help as yet.
Hopefully someone will have some ideas as to what to do next!
Regards, Jon

I've had another reply back from Apple which I am posting should anyone else have similar problems. Sadly it is a very disappointing and I think rather strange response.
+I understand that you are still unable to sign into your accouint on your other computer. I sincerely apologize for any frustration this may have caused you and I would be happy to assist you today.+
+I have looked further into this issue and your issue seems to be caused by a technical issue, which is out of my scope of support. The iTunes Customer Support answers questions about iTunes Store billing and accounts, downloading purchases from the iTunes Store, and iTunes Store content.+
+However, Apple also offers support for the .Mac services. Please visit the .Mac Support website to review the information provided or submit a question to the .Mac Support team:+
+http://www.apple.com/support/dotmac+
+In the future, if you need assistance with the iTunes Store, please don't hesitate to contact us again. I hope that you continue to enjoy using the iTunes Store. Thank you for being a loyal iTunes customer.+
Sincerely,
So my question is Who answers technical iTunes support from Apple?
Don't get me wrong, I love Apple - their design, the fact my computer does 'just work' and the way I now listen to music. Just a bit surprised by that reply.
Anyway fortunately I solved my problem and I hope this thread helps anyone else.
Jon

"Write Error - Limited User Account"

I get the following message after having worked on a flash
file for a couple of hours:
"An error occured while attempting to write to a file. If you
are logged in with a limited user account, then you may be
attempting to write into another user's folder which is not
supported."
I have a perfectly legit copy of MX Studio 2004 and is
registered and in good standings at Adobe. I saved my file every 15
minutes or so. Now, I can't save it, or do a save as either, plus
the file has vanished. I still actually have it because I have not
closed Flash, but it will be lost once I shut down. The SWF file is
still in my file system, but the FLA file has disappeared.
This has happened to me once before - any idea what's going
on?
Thanks!

sounds like a hard disk error or fragmentation, try saving
the file under a different name (save as...) in a different
directory folder.

Difference Between Database Schema and Database User Account ??

First i would like to know what an Oracle Database schema exactly is ?
And what is it for and also What is it's use ?
Later the exact "Difference Between Database Schema and Database User Account".
I googled about it but i'm unable to find out it's The difference,
Please try to explain in a simple manner........
Thank you very Much in Advance..........

user13655582 wrote:
Greate example. but i would like add one more point..
a user is a schema and schema is a user. but when this applies to the user that he become a schema, only if he has got some objects. so we can say while creating the user which dosent contain any objects called simple user account but afterwords when he has got an objects then we can say its a schema as the above user has shown you through the exampleIt is just word-play. There is nothing in like a 'status' indicator to say "USER_A is just a user but USER_B has become a schema". Many people use the terms "user" and "schema" interchangeably, and some very good DBAs will insist this is correct. I don't disagree with them even though I usually try to make the distinction.
In a typical application, all of the objects (tables, procedures, etc) that implement the app will be owned by a "application schema owner" - a user which exists for the sole purpose of owning the schema. Said user will have no privileges at all .. especially not CREATE SESSION. Except for possible maintenance activity no one ever actually connects as this user. User accounts are then given to actual humans who connect with their own accounts. The accounts have the necessary system and object privileges granted to them - via a role. One could also create a special account (let's call it APP_ADMIN) that is used for maintenance and batch operations within the application.

Difference between ACS Administrator account and ACS user account?

Does an ACS administrator by default have full rights to every device it manages?
I thought ACS administator accounts and user accounts were different.
I have an acs admin account called admin_1. then i created another user account called admin_1 (for switch/router access)
when i set the password for admin_1(user accounts), when i tried to login into the switch it wouldn't take. It would only take the password set for the ACS admin account.
Is this by design?

My understanding was that this is not the case, Ive just tested my installation again to make double sure and the user accounts and the admin accounts are clearly seperated
The RADIUS server does not make use of the Admin user database.

Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.

Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

I used this command and my user account is hidden sudo mv /Users/ed /Users/.ernestotaricone .

i used this command and my user account is hidden and my account name ED
sudo mv /Users/ed /Users/.ernestotaricone
Please help me retrieve this Ed account back. Will there be any luck?
When i checked the size of Users account the same gigabyte space is there but cannot see my user account ED

This is the report the system gave me: CFPreferences: user home directory at file://localhost/Users/ernestotaricone/ is unavailable. User domains will be volatile.
What of if i create another account say User account say good, can i transfer it back there?
Seth

Lenovo Thinkvantage Access Connections prevents Microsoft File and Printer Sharing

We have several Think pad laptops deployed in our company, including G41, T61, and T500 models. We are using Numara's Track It software to inventory our workstations and laptops. The auditing process needs to have Microsoft File and Printer Sharing turned on in order to work. We have enabled a group policy to set this to on by default. However, the Thinkavntage Access connections manager for the LAN connection overrides the GP and turns off the File and Printer Sharing by default. What's worse, with it off, we can't remotely manage the machine's services or even access the registry. We know that his is the issue, because reconfiguring the access connections manager to allow the file and printer sharing will allow all of our remote administration tools to work, insluding the inventory audit.
Does anyone know how to disable the access connection manager from running remotely? or does anyone know how to change the settings remotely to all for the microsoft file and printer sharing to be enabled by default. I would hate to have to visit each user individually just to turn off a setting.
anyone else run into headaches because of this "security feature"?
Jason

1.Find snetcfg.exe on internet
2.Create batch who runs snetcfg with this commnads from network locations
(this setting enable File and Printer Sharing)
snetcfg -u MS_Server
snetcfg -c s -i MS_Server
3. Deploy and run batch on laptops (GPO)
4. Deploy new AC profiles settings (.loa)
done
sorry for my english

ThinkVanta​ge Access Connection​s and Limited User Account (LUA) on XP SP3

Similar Messages

Maybe you are looking for

ThinkVantage Access Connections and Limited User Account (LUA) on XP SP3