ThinkVantage Fingerprint Software 5.9.9.7282 stops working, crashing on 64-bit Windows 7.

ThinkVantage Fingerprint Software 5.9.9.7282 stops working, crashing on 64-bit Windows 7.
Issue producing on Lenovo ThinkPad W530.
Each time I tried to start the ThinkVantage Fingerprint Software, it is crashing with following error :
[Window Title]
ThinkVantage Fingerprint Software Application
[Main Instruction]
ThinkVantage Fingerprint Software Application has stopped working
[Content]
Windows is checking for a solution to the problem...
[Cancel]
Because of this crash I am unable to enroll my fingerprint data for windows logon.
I have noticed that all ThinkVantage softwares are crashing e.g. ThinkVantage Power Manager 6.
As per Lenovo Support Chat service I have updated the following softwares/drivers to the latest versions:
1. power manager
2. power management
3. think vantage
4. hot key features
But still no luck, fingerprint software is still crashing, please help!

Hi I have exactly the same problem, you are not alone. As soon as I find a solution I will post it here
greets

Similar Messages

MS Project 2013 has stopped working APPCRASH in 64 bit Windows 7 OS

Dear All,
last 3 days i am facing problem regarding Project Professional 2013 sync with SharePoint 2013 ,
When i click the ´Open with Project´ in SharePoint task list,it opens the Project Professional and stopped the Project.(ref below screen shot)
Error in Detail:
Problem signature:
Problem Event Name: APPCRASH
Application Name: WINPROJ.EXE
Application Version: 15.0.4569.1504
Application Timestamp: 52c5ecd5
Fault Module Name: WINPROJ.EXE
Fault Module Version: 15.0.4569.1504
Fault Module Timestamp: 52c5ecd5
Exception Code: c0000005
Exception Offset: 00a0579f
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 16393
Additional information about the problem:
LCID: 1033
skulcid: 1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Please advice anyone....
abbijohn

Hi,
Try to repair MS Project from the Windows control panel to see if it helps.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Cannot login using ThinkVantage Fingerprint software

Hi, I cannot log in using my fingerprint reader. I am sure that fingerprint reader is OK, I sucessfully enrolled fingerprints. I enabled fingerprint login, when computer starts up, windows 7 message saying "Swipe your finger on green" shows up, but when I swipe the finger, nothing happens. Fingerprint reader just flashes green once (when I try to swiper finger, that is not enrolled, orange light flashes, so fingerprints are enrolled fine).
I tried to uninstall fingerprint software and driver, but its not working. I am logging in with domain account.
OS: Windows 7 x64
Lenovo T410 (NT7Q7MC)
ThinkVantage Fingerprint Software version: 5.9.4
Thank you for help!
Labus
Solved!
Go to Solution.

JDay is right. Go into the control panel, search for finger, click on "change biometric settings" and make sure that allow user to log on to a domain......is checked. After making this change it should work fine with domain accounts.
-gan

My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit.

My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit. I need help, does anyone know what to do?

We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
Mylenium

ICloud has stopped working continuously get the message windows 8.1 operating system

iCloud has stopped working continuously get the message windows 8.1 operating system

Hi Fe-Can,
If you are having difficulties with iCloud you may want to use the steps in this article to troubleshoot -
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks for using Apple Support Communities.
Best,
Brett L

When i try to send email in my hotmail i get this message webkit2 web process.exe stopped working then it closes the window any ideas

when i try to send email in my hotmail i get this message webkit2 web process.exe stopped working then it closes the window any ideas

Do you know how it is chaning the addresses? Can you compare what is send to what it is your address book?
In the meantime, make a temporary, backup copy of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Thinkvantage Fingerprint Software

I recently updated to version 5.9.6.
I can sign on to the computer using the fingerprint reader with no issues, it works like it always has. However, now when I got to a web site or anything else that requires a password I get the following error: The requested function requires fingerprint authentication but the device is not installed. Please make sure the device is connected and retry the operation.
The password manager works fine but only recognizes the fingerprint software when I open it directly. When in a web site etc. I need to manually enter my password to access it.,
Need to fix it so I have this function back. While this software is not as good as what I had on my old HP its better than not working at all

*edit* Go into Control Panel>Hardware and Sound>Biometric Devices and make sure the settings are appropriate (and Security set to convenient level). The Help section in Biometric Devices can walk you through different steps.
Ok. Can you go into BIOS, under Security, and try resetting your fingerprint data? Restart and go to a page without setting your fingerprint and see if it still happens.
Can you also make sure all of your Windows updates are current and run ThinkVantage System Update?
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

Z60t - ThinkVantage Fingerprint Software not working properly.

I have reinstalled Windows XP multiple times over the past 4 years on this laptop, but this issure still hits me. I have never been able to find out why it does this. What is "this"? Glad you asked, because I might have gone on for pages.
Basically, the "Fingerprints" and "Settings" menu choices are innaccessible. They always have, even on the pre-installed XP when I recieved this laptop for the 1st time. I only want easy accessibility to the Fingerprint functions.
I have Client Security Solution installed and updated, because I couldn't do worth junk in the Fingerprint Software. After I set up the security, enrolled my fingerprints, and setup my power-on bios password, I went into the bios to reset the TPM. When I did that, I also wanted to change my power-on and supervisor password. With that done, I booted the system. The fingerprint software asked for my fingerprint before boot, and it successfully registered...but the password it tried to enter failed. Of course, I figured this would happen, but when I tried to find a way to change the power-on password saved in Client Security Solution, everything pointed to access that setting from the Fingerprint Software.
I honestly need help, as it is aggravating to enter Supervisor and Harddisk passwords at every boot. As a recap, the menu choices don't even highlight as I hover over them. I click on them, and they don't respond with anything.
Thanks in advance.

There was an already existing thread about this.
http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&thread.id=26&view=by_date_ascending&page=1

Thinkvantage fingerprint software patch 7261 doesn't take

X201s
Win7 32, up to date
Fingerprint software 7226
Using system update to apply fingerprint software patch 7261 doesn't work. Just says it didn't install.
I downloaded the patch separately. Seems to run fine, though only once did it say 'system restart necessary'. But in no case does it 'take' - that is, after a restart, the installed fingerprint software is still 5.9.7, v7226.
It's not a huge issue, but Lenovo's fingerprint software is always hit or miss, and I always hope the next update will fix it.
X201s, W7 Pro, 4GB

I'm aware that the patch doesn't install in TVSU. And the patch only modifies/updates 1 file, it does not change the version of the fingerprint software that is installed.
This week there should be a new version 5.9.8 of fingerprint software for Win7. This version will include the patch file and other fixes that have been picked up along the way.
Sorry for this trouble with the patch.

After software update, airport an USB stops working. Clean install fixes it until I update

I've reset PRAM and SMC erased and reinstalled 10.6 multiple times. Everything is fine until I do a software update. I can boot into windows via boot camp and all is well, but in OS X some USB ports stop working, and airport will say no hardware installed. I've repaired permissions as well with no luck. No AppleCare left so I can not call Apple.

I have this problem too. I have the 27-inch LED cinema display connected to my Mac Pro 1,1 via the Radeon 5770. I also suspected it had something to do with the machine going to sleep, but the audio doesn't disappear every time it goes to sleep. Unplugging the monitor fixes the problem.
I also noticed that when the sound has went away, if I try to change the volume there will be a long delay before seeing the volume-change graphic. Also, toggling the sound device in System Preferences while the problem is in effect is unresponsive, sometimes giving the beach ball. Finally, this message is seen in console logs when the sound has went away:
10/19/10 6:01:22 PM kernel USBF: 75053.200 AppleUSBEHCI[0xf3d0800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 5, EP: 0)
I can make this message appear on demand by attempting to change the volume.
If (when) this happens again, I'm calling support.

HT2188 i have iphone 3 and when i updated the software my sim card as stopped working, pls what can i do

i just updated my iphone_3, and my sim card has stopped working, i tried to restore and it kept coming back with erorr mrssage, what can i do

An iPhone 3G cannot be updated to 5.1.1; the last version supported is 4.2.1. So if you managed to get 5.1.1 on it through some means that bypasses Apple's protections you have wiped out your phone.

HT4623 Iphone software update caused wifi to stop working

When I updated my iphone 4s several weeks ago, it caused my wifi button to gray out and become non-functional. Several apps also stopped working. Can this be fixed?

Not likely, But try, Settings App > General > Reset > Reset Network Settings. See if better. If not, restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

Adobe Photoshop CS5 has stopped working (Win 7, 64 bit)

I am trying to run Photoshop CS5 on Windows 7 64bit. Everytime I open the program, I get an error saying "Adobe Photoshop CS5 has stopped working", immediately after the splash screen goes away and the main gui opens. The only option on the error is "Close Program".
I am on a computer with an i7 processor and 12GB of memory. I have two Nvidia GTS 250 video cards, running four monitors.
Over the course of the last day, I have reformatted my computer, and reinstalled Windows twice. I have reinstalled the CS5 Master Suite more times than I can remember. I have also downloaded and installed the latest video card drivers from Nvidia.
I continue to have the same problem every time I try to open any of the programs in the CS5 suite.
The only time I have come close to getting it to work was immediately after installing the new Nvidia drivers, before restarting my computer. I was able to open it one time without it crashing, Once I restarted my computer, Photoshop continued to give me the same error every time I try to open it.
I have no other software installed on my computer. It is a brand new installation of Windows 7.
I have been on the phone with Adobe technical suuport for about an hour and a half, and I have yet to get a single suggestion other than attempting an install with my network cable unplugged. Other than that, they seem to be fond of transfering me back and forth between departments (and asking me to repeat all of my information every time).
As you can probably tell, I am very frustrated at this point and would greatly appreciate any suggestions.
Thanks,
Trevor

My scenario and history:
Windows Vista Ultimate and now Windows 7 Ultimate
NVidia Quadro Fx 4500 driving 4 monitors total SLi on or off - makes no difference. Drivers irrelevant.
2 x Xeon 5160 (so total 4 cores)
24Gb RAM
PS CS 4 or 5
4 monitors - - yep it is the 4 monitor thing.
Fails everytime as you describe.
Observation - If you Remote Desktop Connection onto the computer - and so in effect are using only ONE monitor - PS works fine.
A WORKAROUND for 4 or 5 - I don't consider this a fix because you lose some functionality but it gets you 99% there and is the same workaround for CS4 or 5
Go to<drive>:\Program Files\Adobe\Adobe Photoshop CS5 (64bit)\Plug-ins\Extensions\ (or CS4 - depending on version)
Locate File:
ScriptingSupport.8li
Disable this extension by renaming the file with a tilde in front of the file name. Thus:
~ScriptingSupport.8li
Start Photoshop - it works and is mainly functional.
The only real downside I have discovered is that disabling this scripting extension means you cannot use some of the built in scripts under FILE - SCRIPTS - the biggest PIA for me being the Contact Sheet builder no longer works. But as I now use Lightroom to create contact sheets - this is not a big loss. Other scripting functionality - I am sure is affected - but not to a point I find PS unusable.
ADOBE - if you read this - it has been that extesion now for the last two editions of PS.

All third party apps stopped working (crash at launch)

Ok, so there's a BUNCH of people having the exact same problem as I do (search this forum or Google with the title of this post). And I'm posting this in iPad but it does happen on iPhone too. Summary :
Often after an iOS update (but not always) third party apps stop working. When started, they flash open and then just quit.
Apple built-in apps keep working fine.
NOTHING solves the problem : hard reboot (home+power until reboot), deinstall+reinstall one/all apps, restore the iPhone/iPad, buy a new (free) app from the store to "reset" software authorization, de/reauthorize computer, reset password from app store account, deinstall app and then reinstall using the iPad directly (not via iTunes), etc.
I have one iPhone 4 and one iPad with this issue.
Oddly enough, on the iPad, only apps that have recently been UPDATED crash. Apps that were present and left alone on the device keep working. On the iPhone, there was an iOS update so everthing was reinstalled and therefore doesn't work anymore.
Strangest thing : reset the device to make sure nithing is open in the background, launch an app, app crashes and returns to springboard, double click "home" and... tadaam, the crashed app is in the list of open apps. On the iPad, 4-finger slide does even go to that app's screen (which is pitch black).
As I said, 30 minutes of googling revealed at least 50 identical cases. All seem related to iOS 5.1. My iPhone rune iOS 5.1.1 (that was the upgrade) and my iPad runs iOS 5.1 and I'm NOT doing the update until I can solve this crazy thing.
Please, all, HELP !
Thanks in advance.

Please, Alan, I know my message might be a bit long, but do read it! I DID try that and absolutely everything else that was mentionned in the other posts about this subject. Nothing works. And it doesn't work for the others either, not just me.
The only thing I can think of right now is to put the iDevice in DFU then make a clean install and configure it as a new iThingy. This looses all stored data and config so it's a pain in the a... and I won't try it unless I'm pretty sure nothing else can be done. And I'm not entirely sre it'll work, either…

Crystal Reports XI stopped working error message on a Windows Server 2008

We recently installed Crystal Report XI in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
"Crystal Reports has stopped working"
Problem signature:
Problem Event Name: BEX
Application Name: crw32.exe
Application Version: 11.0.0.1282
Application Timestamp: 422d5c77
Fault Module Name: StackHash_1fc1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7ef2fbfc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 1fc1
Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
Additional Information 3: 2f92
Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
Any recommendation on what is causing this error?
Thanks,
Luis

Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
The error I'm getting when trying to start the service is:
The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

ThinkVantage Fingerprint Software 5.9.9.7282 stops working, crashing on 64-bit Windows 7.

Similar Messages

Maybe you are looking for