Third Party WebService call: SOAP Lookup vs SOAP Adapter Scenario.

Hello Experts,
What are the pros and cons of using SOAP Look up in Message Mapping for webService call.
Previously my scenario was a standard SOAP Adapter Scenario. But it had BPM, so I have designed it via SOAP look up in Message Map to avoid BPM.
I want to know what are the merits and demerits (In terms of Performance - Payload size:Runtime, Maintanence, Configurability,etc) of using SOAP Look up instead of standard SOAP Scenario.
Regards,
Sudharshan N A

HI,
I am assuming that you migth have visted this link
SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
SOAP Look-ups are very much possible and performance wise also its preferrable as compare to BPM.
Its pretty much simple and easy way to handle it with UDFs.
The performance could also depend upon what kind of things you need to achive or replacing with BPM.
If you will be dealing with too many resources in BPM then that creates the performance overloaded issues.
UDFs also have the performance problems nased on the payload size but very minimal.
Thanks
swarup

Similar Messages

PI SOAP access to third party Webservice,Return ERROR

Hi Experts,
I have one soap synchronous scenario access to third party WEBSERVICE,Return error.While testing the wsdl in soap ui, I am getting response, messages showing successfully processed. I think it is pi to send xmlns:ns1='http://tempuri.org/' on both sides should not be a single quotation mark, but I don't know how to adjust PI set. how do you see.
1、SOAP UI submitted to Webserver XML
[2014-05-26 08:47:24.662] --- Recv data from SocketId=272 Socket=10880
POST /MWGate/wmgw.asmx HTTP/1.1
Accept-Encoding: gzip,deflate
Content-Type: text/xml;charset=UTF-8
SOAPAction: "http://tempuri.org/MongateCsSpSendSmsNew"
User-Agent: Jakarta Commons-HttpClient/3.1
Host: 10.0.0.253:8082
Content-Length: 520
<soapen:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tem="http://tempuri.org/">
    <soapen:Header />
    <soapen:Body>
        <tem:MongateCsSpSendSmsNew>
            <tem:userId>DOA001</tem:userId>
            <tem:password>dennis</tem:password>
            <tem:pszMobis>1313773654</tem:pszMobis>
            <tem:pszMsg>1111</tem:pszMsg>
            <tem:iMobiCount>1</tem:iMobiCount>
            <tem:pszSubPort>*</tem:pszSubPort>
        </tem:MongateCsSpSendSmsNew>
    </soapen:Body>
</soapen:Envelope>
2、PI submitted to Webserver XML
[2014-05-26 08:36:08.725] --- Recv data from SocketId=271 Socket=10704
POST /MWGate/wmgw.asmx HTTP/1.0
Accept: */*
Host: 10.0.0.253:8082
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <[email protected]>
Content-Type: text/xml; charset=utf-8
Content-Length: 417
SOAPACTION: "http://tempuri.org/MongateCsSpSendSmsNew"
    <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
        <SOAP:Header />
        <SOAP:Body>
            <ns1:MongateCsSpSendSmsNew xmlns:ns1='http://tempuri.org/'>
                <ns1:userId>DOA001</ns1:userId>
                <ns1:password>dennis</ns1:password>
                <ns1:pszMobis>13637731567</ns1:pszMobis>
                <ns1:pszMsg>Constant</ns1:pszMsg>
                <ns1:iMobiCount>1</ns1:iMobiCount>
                <ns1:pszSubPort>*</ns1:pszSubPort>
            </ns1:MongateCsSpSendSmsNew>
        </SOAP:Body>
    </SOAP:Envelope>
3、SXI_MONITOR   Payloads content:
<ns1:MongateCsSpSendSmsNew xmlns:ns1="http://tempuri.org/">
        <ns1:userId>DOA001</ns1:userId>
        <ns1:password>dennis</ns1:password>
        <ns1:pszMobis>13637731567</ns1:pszMobis>
        <ns1:pszMsg>Constant</ns1:pszMsg>
        <ns1:iMobiCount>1</ns1:iMobiCount>
        <ns1:pszSubPort>*</ns1:pszSubPort>
    </ns1:MongateCsSpSendSmsNew>
4、PI channel

Hi Nathan,
Have you tried the SOAP HTTP Axis function.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f?overridelayout=t…
https://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/content.htm
Configuring the Receiver Axis SOAP Adapter (SAP Library - SAP Exchange Infrastructure)
Regards,
Jannus Botha

I used a third party programme called Mackeeper UGHHH,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??how can i manually put these files back where they belong?SO upset!!

I used a third party programme called Mackeeper UGHHH SOOO Stupid i know,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??and will not work even when i highlight one by one!!
how can i manually put these files back where they belong?
i know i should have used time machine but i have not set it up and its too late for that now
i have been researching and racking my brain on how to put these folders and contents of them back to where they once were all of the contents of the folder are still in tact AND i have not emptied my trash,my programmes and some of my apps are not working properly now...i use my computer alot for making music and things are jumbled up now...
is there anyone out there who knows the answer to my prayers on how to go about putting these folders/files back to where they came from to restore functionality to my mac..Yes and thank u if u were going to tell me i HAVE un installed mackeeper...A very sad and upset Mac user!! Cheers Shane

hello there thank u so much for ur reply!! ok i uninstalled mackeeper now and the put back option is still in grey im so confused...i tried restarting my computer like u said and put back still in grey??!! the files that are in my trash are everything from Accounts,address book plug-ins,address book,adobe,aim.........then stuff like apple,Audio,....to caches color pickers,colors,com.apple.TCC,to DVD player to facebook,google to ilifemedia browser to itunes to keychains to movie effects,preferences printers to skype...my Native instruments files BUT not all of them my garage band but not all of it...it seriously looks like my whole library is in the trash i tried to put things back where i THINK they belong and it just added the item or folder under where i thought it went and didnt restore functionality to for instance google chrome and all my book marks are there....they seem to be only certain things from my library that would have added some functionality to apps and programmes like my garageband is missing stuff photobooth wont work so on.......kinda looks a bit like this thats only the half of it!! Cheers shane!!!

You have installed a third party application called CTLoader. You need to remove it. /Library/Application Support/Conduit /Library/InputManagers/CTLoader /Library/Receipts/ctloader.pkg /Library/Receipts/ Toolbar name .pkg /Library/Application Support

Could some one help me out how i get to /library/application
If have found below the solution but don't know how to get there ? I am from the netherlands so please be easy in your words so that i could understand it.
you have installed a third party application called CTLoader. You need to remove it. /Library/Application Support/Conduit /Library/InputManagers/CTLoader /Library/Receipts/ctloader.pkg /Library/Receipts/<Toolbar name>.pkg /Library/Application Support
Thanks for the effort !
Peter

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Application Support/Conduit/Library/InputManagers/CTLoader
Click Go then move the Conduit/Library/InputManagers/CTloader file to the Trash.
The same for /Library/Receipts and /Library/Application Support
Check these folders as well.
/Library/InputManagers/CTLoader
/Library/ScriptingAddtions (anything CTLoader realted)

How to invoke third party webservices in oracle apps R12 when wsdl is provided and no SOA server exists

Hello Everyone,
I am working on Oracle apps R12 and we don't have any SOA server setup. I got a requirement to invoke a third party webservice and send some of the data from oracle apps database to the third party and they provided the wsdl file to invoke their webservice. How can I achieve this? Any help or suggestions would be greatly appreciated.
Thanks,
Ravi

ca0c5e8e-8457-46de-896f-fd9dcc13299e wrote:
Hello Everyone,
I am working on Oracle apps R12 and we don't have any SOA server setup. I got a requirement to invoke a third party webservice and send some of the data from oracle apps database to the third party and they provided the wsdl file to invoke their webservice. How can I achieve this? Any help or suggestions would be greatly appreciated.
Thanks,
Ravi
Ravi,
I believe you need to have SOA configured with EBS to run those webservices.
Please log a SR to confirm the same with Oracle support.
Thanks,
Hussein

Does anyone recommend a third party app called siri-for-iphone-4?

I saw a third party app called siri-for-iphone-4 which is supposed to add siri to older iphone 4, but do not know if it is suitable or useable.

Is it an app that you can download from the App Store? If it is not, it would require that you jailbreak your phone which would void your warranty. Definitely not worth it, in my opinion.l

SAP to consume third party webservice that requires saml authentication

Hi All,
I am able to invoke our thirdparty webservice from soapUI, but it is a two step procedure, This is how it works in SoapUI:
step 1) first send below predefined message, embeded with username and pwd in the header:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Header>
          <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
               <wsse:UsernameToken>
                    <wsse:Username>myusername</wsse:Username>
                    <wsse:Password>mypwd</wsse:Password>
               </wsse:UsernameToken>
          </wsse:Security>
     </SOAP:Header>
     <SOAP:Body>
          <samlp:Request xmlns:samlp="urn:oasis:names:tc:SAML:1.0:protocol">
               <samlp:AuthenticationQuery>
                    <saml:Subject xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
                         <saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">myusername</saml:NameIdentifier>
                    </saml:Subject>
               </samlp:AuthenticationQuery>
          </samlp:Request>
     </SOAP:Body>
</SOAP:Envelope>
after this, we are got the response as:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Header>
          <header xmlns="http://schemas.thirdparty.com/General/1.0/">
          </header>
     </SOAP:Header>
     <SOAP:Body>
          <samlp:Response xmlns:samlp="urn:oasis:names:tc:SAML:1.0:protocol">
               <Signature xmlns="http://www.w3.org/2000/09/xmldsig#">
                    <SignedInfo>
                         <CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
                         <SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
                         <Reference URI="#A18A90576-64FD-71E0-A9BC-286444658733">
                              <Transforms>
                                   <Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
                              </Transforms>
                              <DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
                              <DigestValue>LzlvRhszr3qlOTG7AZX8i+yKvRI=</DigestValue>
                         </Reference>
                    </SignedInfo>
                    <SignatureValue>qc1x+84wkkPrf76dHW2HJ...</SignatureValue>
                    <KeyInfo>
                         <X509Data>
                              <X509Certificate>MIIB3I.....NBgkqhk</X509Certificate>
                         </X509Data>
                    </KeyInfo>
               </Signature>
               <samlp:Status>
                    <samlp:StatusCode Value="samlp:Success"/>
               </samlp:Status>
               <saml:Assertion AssertionID="A18A90576.." xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
                    <saml:Conditions NotBefore="2011-01-25T09:14:54.045Z" NotOnOrAfter="2011-01-25T17:19:54.045Z"/>
                    <saml:AuthenticationStatement AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
                         <saml:Subject>
                              <saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">myusername</saml:NameIdentifier>
                         </saml:Subject>
                    </saml:AuthenticationStatement>
               </saml:Assertion>
               <samlp:AssertionArtifact>MDGH....RbY6qHUFcO</samlp:AssertionArtifact>
          </samlp:Response>
     </SOAP:Body>
</SOAP:Envelope>
step 2) from the above response body, use the Signature elemenent, and saml:Assertion element as part of header of the original request, so the actual request in soapUI has become:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:product="http://mytp/myfunctionality">
     <soapenv:Header>
          <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
               <Signature> ...</Signature>
               <saml:Assertion>..</saml:Assertion>
          </wsse:Security>
     </soapenv:Header>
     <soapenv:Body>
          <product:isProductAvailable>
               <product:ProductNAME>myproduct</product:ProductNAME>
               <product:ProductYEAR>2010</product:ProductYEAR>
          </product:isProductAvailable>
     </soapenv:Body>
</soapenv:Envelope>
after sending this above request, we are getting the desired response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:product="http://mytp/myfunctionality">
     <soapenv:Header>
     </soapenv:Header>
     <soapenv:Body>
          <isProductAvailableResponse xmlns="http://mytp/myfunctionality">
               <isProductAvailable>true</isProductAvailable>
          </isProductAvailableResponse>
     </soapenv:Body>
</soapenv:Envelope>
If we want to implement the same functionality using abap consumer proxy, do we need to invoke with two different requests,
is there any efficient way, where we can specify the values of <wsse:Username> and <wsse:Password>, and invoke with original payload.
is there any config in SOAMANAGER, to specify the saml releated settings, for the consumer proxy.
what could be the simplest way to consume this webservice in sap.
thanks in advance, BJagdishwar.

Hi,
Please create logical port using wsdl directly it will apply required settings in LP. You can also ask for client certificate which you can apply while calling 3rd party services. To me this seems X509 client certificate authentication.
You can also create LP manually by giving SAP SAML authentication and save. Next time when you edit LP you will be able to see plenty of option to configure required settings.
Please note that not all security methods are supported by SAP.
Regards,
Gourav

Business system for third party webservice

Hi,
I am new to XI and idoc..Kindly help me understanding concept ..
Is it mandatory to maintain the Logical system name for Sender business system in SLD while we are dealing with Third party systems?
I have Webservice to IDOC scenario. For webservice we are using one business service in logical system is configured as legacy system. When i try to post data from pi to SAP..
It gives me error EDI: Partner profile not available when i check status in WE02.
Is it due to legacy name maintained in third party business system this name is not same to the XI Logical name.
Partner profile maintained for both sender and receiver in we20.

Logical system name fro the WebService has to be maintained in SLD and the same name has to be there in ECC in WE20.
Check the below blog:
/people/rajeshkumar.pasupula/blog/2009/03/16/unable-to-convert-the-sender-service-to-an-ale-logical-system
-Supriya.

Third party system call function module/BAPI through RFC to update Z table

Dear Friends,
We have a third party system which directly inserts a Z table in SAP through its programming, which is an auditing issue.
We want the third party system should call function module/BAPI through RFC so that the Z table gets updated.
waiting for inputs..
Thanks,
Kumar

if third party system is capable of making Remote Function call, then writing a Function module & making it remote enable is not difficult task in ABAP.
You may have to prepare specifications first to decide if third party system is going to Read, insert, update, delete records from Zee table.

Crazy JNDI Problem... (Third Party DB Driver Effects Lookup???) (OAS 10g)

Ok folks, I need some help here...
The scenario is this...
I have a simple web app (one jsp) which is used as a "status checker" to ensure that all the session beans we expected to be deployed are actually deployed and that they can be looked up with JNDI and run some small status routine... That war file for that app is included in the ear file with all of the session ejb jar deployments...
Now, the collection of session beans references three different datasources at one time or another... 2 of which are oracle databases and 1 is a DB2 database...
Lets name them as follows...
OracleDataSource1
OracleDataSource2
DB2DataSource
Now, if I configure the three datasources in the oracle standalone OC4J 10g datasource file and deploy the ear file to standalone OC4J 10g, all of the lookups work, and it successfully uses the datasources... no problems at all...
Ok, so now I try to deploy the ear on OAS 10g using the enterprise manager console, and deployment works fine...
If I run the app before configuring the datasources, of course the lookups work, but the status routines of certains beans fail because they are not able to look up the datasources... no big deal, just start adding the datasources...
I configure OracleDataSource1 and rerun... now things still work, the lookups for all the beans works fine, and some pass now, but others still want the other datasources...
Now configure OracleDataSource2 and rerun... as before, things all work great but there are still complaints looking for the DB2DataSource from a couple of the routines...
Herein lies the problem...
I configure DB2DataSource and rerun, and boom, my program crashes claiming that the lookup of the bean failed...
Now mind you, these beans have all been looked up numerous times during previous runs, and absolutely nothing has been changed with the application... in fact, even the beans that wanted the DB2DataSource were looked up successfully and then just complained of no datasource during their status routine execution...
It's just that once I configure the DB2DataSource, all of a sudden my lookups don't work... I have tried commenting out a couple of the beans, and regardless of which lookups are commented out, it still fails saying it can't find any of the beans, even if the beans i'm trying to look up don't use the DB2DataSource, it doesn't seem to matter...
The InitialContext used for the lookup uses the default "new InitialContext()" constructor and the lookups work fine when the DB2DataSource is not configured, but once it is, the lookups fail saying the objects are not found...
I have consulted with a few other developers here, and noone can seem to understand why this behavior is happening... I have added debugging statements to print the contents of the context's environment, and it is always empty regardless of whether the lookups pass or fail...
The ONLY difference I can see with this DB2DataSource is that it uses an external 3rd party driver... The oracle connections use a driver which was packaged with the OAS installation... I feel pretty strongly that it has to do with the driver because if I have the DB2DataSource configured (causing the failure) and then I edit that datasource to say that it should us the oracle driver, miraculously it causes the lookups to work again, except now I get the error saying the oracle driver doesn't like my DB2 jdbc url...
I'm sorry for the long post, but I'm hoping that at least one person has encountered this before... I cannot think of any reason why the configuration of that datasource with the third party driver would cause these problems, especially when the exact same configuration and setup DOES work with standalone OC4J 10g, even with the DB2DataSource configured... ????? And the fact that the lookups work fine until that datasource is configured really blows my mind... i wouldn't think the datasource configuration should have anything to do with whether the lookups of the session beans succeed or not... hahaha...
Any help would be great... I'm pullin my hair out here... :)
Thanks,
-Garrett

No, I have not asked on the oracle forums yet... :)
It seems that the cause is the driver itself... if I set a different driver for the datasource configuation, the lookups work but it just complains about the driver not being correct for the individual beans...
I have found some documentation claiming that there is an OAS version of the DB2 driver, as well as a Merant version, but I can't seem to find jar files for either...
Does anyone know where I can download the "YMdb2.jar" file? Supposedly this contains the DB2 DataDirect driver that I need...
Thanks,
-Garrett

Will third party software called "Bug me" and "YAPS" work on the Centro?

I am currently a Tungsten E2 user. I am considering buying a Palm Centro and want to know if the third party programs "Bugme" and "YAPS" work on the new Centro that is offered by Verizon? Secondly does the Centro have the ability to "tap" in letters off the touch screen as the Tungsten can or do I need to push the very tiny buttons on the front of the phone?
Bdomo
Post relates to: Tungsten E2

Any 3rd party applications that are designed to work on the Palm OS 5.4.9 should work on the Centro.
The Graffiti writing utility is not included on the Centro.
You can check out the user guide for the Centro on the Palm.com website. Go to Palm.com, hover the mouse over the support and downloads link at the top. Select Knowledge Library and on the bottom of the page is a box for solution ID. Enter 20198 and you will get the list of the manuals available. Select the Centro link and you can read all about the Centro and how to setup and use the phone.
Post relates to: Palm i705

Third Party Application Called TuneUp Lost Ringtone Icons/Ability to Buy

Okay, I purchased and installed a third party application that is supposed to help iTunes get album art and other things. All was going well until i did their latest, greatest update and now I cannot see any Ringtones icons in the field that shows if ringtones are available in iTunes purchased songs. I still have my "purchased ringtones, but I don't have the ability to purchase anymore on songs that are eligible.
I've uninstalled TuneUp, reinstalled a fresh version of iTunes, but still not joy. How to I burn iTunes to the ground without losing my entire music library?

Right that is the point. I had a whole slew of eligible songs purchased from iTunes in my library that now are not available for purchase. For example I just purchased two songs that have the icon in the iTunes store. After I purchase them the icon in the "Bell" ringtone column is not showing for the songs that should be eligible. The only recent change I've made is this third part application. So I am thinking this has messed with my library somehow.

Third Party Ticketing Tool integration with solman service desk scenario

Hi,
I need any guidance on integration Of third Party ticketing tools like OVSD with the SAP Solution Manager Service Desk Scenario.
Regards,
Kaustubh.

Hi Maheshwar,
What I am trying to do is, try to maintain the data like,,
Caller ID-- sender
Assignment of workgroup--
Search Code--
Priority--
and description--
now some of these are constants that we need not determine every time.
but my question is, can we maintain these as a set of parameters in the method definitionunder parameters tabjust similar to MAIL_HEADER...which is displayed in the mail alert.
we already have a scenario maintained in the HPSD where it reads the mail picks up specific content based on key words, and creates a ticket.
and If we can maintain these by modifying the method, then where can we maintain the multiple data/options for this
And also please send me what were the steps u have done.
U used a Z method or customized the Function module??
Bcz in my case I think I will have to do both..
Regards,
Kaustubh.
Edited by: kaustubh on Jun 19, 2008 6:32 PM

Where to define third party logical system name in file to idoc scenario

Hi Friends,
I am shalini shah.
I have one doubt, where I can define the logical system name in File to Idoc scenario.
I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
In SALE or any where.
Please give me solution.
Warm Regards,
Shalini Shah

Hi Shalini,
You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
Just refer the below link for configurations with step by step solution.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

ABAP Webservice and Third Party Webservices Consume in Webdynpro

Hi Everyone,
My Landscape is
ECC 6.0 SP16.
PORTAL is Netweaver 2004s SP16
NWDS SP14.
I Need How To Develop Webservice From RFC's in ECC.[I Need Step By Step Documents Making Webservice From RFC].
Because I read so many documents,Blogs But i am not getting what i want.
What Configuration I Will Do On SOAMANAGER.
How To Cosume in Webdynpo.
I Exposed RFC As Webservices but When I Testing in wsnavigator
I Am getting Below Error
An error has occurred. Maybe the request is not accepted by the server:
Connection refused (errno:239)
The above ABAPWebservice i consumed in Webdynpro.After Deploying i will get the error.
Exception on execution of web service on destination 'DEFAULT_WS_EXECUTION_DEST' for operation 'ZK2GenProjInfo' in interface 'z_k2_gen_proj_info'
I Am in confused State What I Will Do.
I Am Thinking the Webservice is not correct.
And also We have some Internet Webservices.
https://usint.skire.com/ws/services/mainservice?wsdl
the above Webservice Protocol is https.
But Our Portal Run under http.
Thanks
Subba Rao

Hi,
The given Document is helpful to me.
But in My ECC 6.0 SP18.WSConfig and WSADMIN Transaction codes are Absolete.
New Transaction code SOAMANAGER We get the exposed Webservice.
But What the Problem is We forget some things while creating Webservices.
We are getting the Error While Testing Webservice Under Wsnavigator Of Portal.
I Am getting Below Error
An error has occurred. Maybe the request is not accepted by the server:
Connection refused (errno:239)
The above ABAPWebservice i consumed in Webdynpro.After Deploying i will get the error.
Exception on execution of web service on destination 'DEFAULT_WS_EXECUTION_DEST' for operation 'ZK2GenProjInfo' in interface 'z_k2_gen_proj_info'
I Am in confused State What I Will Do.
I Am Thinking the Webservice is not correct.
And also We have some Internet Webservices.
https://usint.skire.com/ws/services/mainservice?wsdl
the above Webservice Protocol is https.
But Our Portal Run under http.
Thanks
Subba Rao

Third Party WebService call: SOAP Lookup vs SOAP Adapter Scenario.

Similar Messages

Maybe you are looking for