This folder is on server, since item numbers are many, only few are displayed

Hi,
Can some one let know what is meant if i get below in outlook (2013)
This folder is on server, since item numbers are many, only few are displayed.
To display details from Microsoft exchange, please click here.

Hi,
You should be using an Exchange Account in Outlook, you see this because the Cached Exchange Mode Sync Slider setting is configured to a value other than
All. For example, the following figure shows a profile configured with Cached Exchange Mode and with the Sync Slider set to the default value of 12 months, which means Outlook saves the emails of the recent 12 months to local. If you set it
to All, you will not see the message again.
You can refer to this kb below to learn more:
http://support.microsoft.com/kb/2733062/en-us
Regards,
Melon Chen
TechNet Community Support

Similar Messages

  • Why am I not able to download all the messages from the email server, only few are downloaded, the rest are not? Things were fine until last week.

    I've tried all the suggestions including deleting the inbox.msf etc. I have also tried uninstalling and reinstalling Thunderbird, but none of them seem to work.

    Is it hanging on the same message each time? If so go to your email providers web mail site and log into your account there. Read and delete the problem message and see if the remaining messages download.

  • Playbook camera shows since 4 or 5 days only from black to white stripes

    Hi,
    My playbook (bought this year in april) shows since 4 or 5 days only stripes from black to white.
    If I switch the camera or if I change to video recording, same stripes.
    When I take a picture, the result is just stripes from black to white.
    Please see attached pricture of the playbook's camera.
    I restared the Playbook already, no effect.
    Does anyone have an idea what's going on there? Is it eventually a hardware malfunction with the camera chipset? Any ideas or help is appreciated, I'm taking a lot of photos, therefore I am also willing to send it back for repar/replacement.
    Thank you very much,
    Stefan

    I am sure that this has already been dealt with on this site. Check the search box at the top to see what comes up. I think your PlayBook has to be sent back to RIM. Here is the RIM contact info for Germany. I think they have a very quick turnaround time. Backup all your data before sending it to them
    Uni Tech Centre
    Universitatsstrasse 140
    44799 Bochum
    Germany
    Bochum
    Alleestraße 165a
    44793 Bochum
    Germany
    Frankfurter Straße 63-69
    Eschborn
    Frankfurt
    Germany
    65760
    Niederkasseler Lohweg 18
    40547 Düsseldorf
    Germany
    Ubitexx
    Kustermann Office Park
    Balanstrasse 57
    Munich, Germany
    81541
    Scoreloop
    Central Tower
    Landsberger Straße 110
    Munich Germany
    80339

  • I use FPT to try to view a directory on a remote server that contains 19000 files,  only 10000 are showing.  Please help.

    I use FPT to try to view a directory on a remote server that contains 19000 files,  but only 10000 are showing.  Please help.

    Hi Steve,
    You can be right that DISM don’t support the scenario that User profile and System are in the separated volumes.
    As a workaround, we should use the defaults to put the profile on C: during capture image, and then set the profile path to be on the D: drive after the image deploying.
    Please refer to below KB for how to using Sysprep to redirect profiles’ locations.
    Customize the default local user profile when preparing an image of Windows
    http://support.microsoft.com/kb/973289/en-hk
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Finder resets itself to default local folder when I delete a folder from a server. How can I stop this?

    Hello there,
    At work I use a Mac Pro (like this one: http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-core-2.8-2008-s pecs.html)... and I have a very weird problem that is really annoying.
    I don't have the information (but I can get it tomorrow) on the operating system or any information of the server I am having the issues with. But I was hoping maybe some one else with the same issue might have the answer without all of that information.
    We use the server to access, open, edit, save, delete, move, etc... all of the files we are currently working on.  No files are ever transfered to our local computer's hardrive and then copied back to the server (don't ask me why, and don't tell me to do that, this is how it's done in the office, and this is what I have to do)...
    The issue is this.  When I have to delete a folder from the server, which is usually a folder within a folder, and maybe within another folder, and another, and another (meaning it takes me time to look for this), the Finder deltes the folder (and asks if I am sure I  want to delete it, because it will be deleted forever since I am deleting it from the server)... and when I say yes, the Finder window that I am currently on (the folder which contains the folder that I am deleting) reverts back to the initial "device-folder" for my local mac pro... meaning the folder which is the main folder of that mac pro, where I can see the mac pro's hard drive, any external hardrives, any usb pen drives, any cds, etc...
    So EVERY TIME I delete a folder on the server, which is more than 30 times a day, I get "kicked out" of the foler which contains the folder to be deleted, and gows back to tha "main" folder of my computer, so I have to go back to the server, back to the folder, and sometimes it is a folder, within a folder, within a folder, etc, etc, etc, ... and don't tell me the solution is to create a shortcut on my sidebar for that folder, because the folders are the jobs that I may be working on that day, so I could work on as many as 30 different folders per day, and I do have those in my sidebar, but it is still pretty annoying to have to go back to that folder.
    One thing I noticed... SOMETIMES, not all the times... IF I delete two folders instead of one, it won't do it... or IF I drag the folder to the trash, instead of clicking on my "delete" icon on my finder's toolbar, it won't do it... but this is only SOMETIMES. So these are not the solutions either.
    I can try to get a screen cap tomorrow of the issue, but if anyone has this same issue and knows how to fix it, plese let me know.
    I will also try to get more info on my computers OS and the server.
    Thank you,
    MW

    Hi PCM1, if i understand well the problem you have is when you click on a URL in a pdf file, the link opens in IE ? Have you checked in the default programs panel to see if all was well set ?

  • Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

    Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • I can't log in to ichat.  Everytime I try I get a message "The server encountered an error processing registration. Please try again later"  .  Is there anything I can do.   this has been going on since yesterday.

    I can't log into ichat.  Everytime i try, I get this message:  "The server encountered an error processing registration. Please try again later."  This has been going on since last night.  Is there something I can do?

    I can't log into ichat.  Everytime i try, I get this message:  "The server encountered an error processing registration. Please try again later."  This has been going on since last night.  Is there something I can do?

  • I know this is old now but since the update i can't get into icloud on my phone it keeps asking me to check t & c's and now no emails. Can't connect to server. I have 4S please help :-(

    I know this is old now but since the update i can't get into icloud on my phone it keeps asking me to check t & c's and now no emails. Can't connect to server. I have 4S please help :-(

    Hi Kellyssi,
    Thanks for visiting Apple Support Communities.
    If you're being asked repeatedly to check terms and conditions, try restarting and then resetting your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    All the best,
    Jeremy

  • I have Mac OSX maxmini; Safari states "can't open server since starting with 'open-help-anchor'.  How do I get into the web site this is blocking?

    I have Mac Mini OSX 10.6.2; Safari states "can't open server since url starting with 'open-help-anchor'.  I didn't type this but possibly I was hijacked but it only occurs on the specific banking site I'm trying to get into.  How do I get into the web site I've always been able to get but now this is blocking it?   Is this related to cookies?

    https://discussions.apple.com/message/25085868#25085868
    I started a thread in safari maverics, I ment to put it in iOS Safari.  New Thread lists all the steps I've taken.  No I haven't tried another browser.  I've only ever used Safari on my iDevices.

  • HT1277 2012, Sept 11, I can't access the icloud email server since early this morning

    2012 Sept 11; I'm unable to access the iCloud mail server since early this AM. Is there a problem with the mailservers?

    Current
    iCloud: Mail & Notes - Users Affected: <1% - Next Update: 09/11/2012 13:00 PDT
    09/11/2012 10:54 PDTUsers may be unable to access iCloud mail. Normal service will be restored ASAP.

  • "No content in this folder" - Media Server Problem

    Hey,
    I've read the forums and it makes me think the media server thing is really broken, which sucks because it was a reason for me to still buy an y-fi
    I have an old laptop that is running 24/7 at home and I want to stream music from it to my X-Fi. Connecting to the WLAN and finding the server works flawlessly, but it always sais "There is no content in this folder" when I select the media server o.O (the machine is running Win XP & Media Player ). When using my desktop pc i can easily browse the media content.
    When i connect the x-Fi to my desktop pc (win 7, media player 2) it works. Any ideas? (except upgrading my old laptop to win7)

    I am not at all familiar with 64 bit systems, so I will let others comment on that aspect. I do not know the cause of your problem, and can only guess at possible solutions. Unless anyone comes up with better ideas:
    * you said '' "Tried your last suggestion, didnt have an icon to the left of my address bar, just a grayed out file." '' <br/>
    If that relates to whatever is at the end of the location bar when you try to follow the instructions for setting a home page it should be possible to drag and drop it onto the home page icon. I think one the few exceptions is where you are using a blank page, that has an icon that will not drag and drop. (although there are other ways blank pages can be set to be the, or one of the, home pages used).
    Other possible reasons for your problem are given in this KB article
    * [[firefox keeps opening many tabs or windows]] <br/> although I think I have a vague recollection the problem with Firefox being set to open incorrect types, and entering an infinite loop may have been resolved. The restore session and malware problems are still definite possibilities.
    * I suppose yet another possibility is some other application looking for updates or something, that is trying to use Firefox for that purpose.
    When all else fails try using Firefox's [safe Mode]], but do NOT make changes at the first window with the options list, just click on continue, if that fails to help disable all plugins also.

  • After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

    Hi,
    We have an issue with our OWA page.  We are currently publishing OWA via UAG.
    We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7.  Since the upgrade, we are keep getting the following error after entering our credentials on the login page.  I've tried with every possible browser. 
    You do not have permissions to view this folder or page
    Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues.  I can see this on the Active Sessions screen
    on Web Monitor. 
    I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running. 
    No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer. 
    Any insight would be helpful?  I'm assuming something changed on the Exchange side after the upgrade.
    Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
    UAG > SP4
    TMG > SP2 Rollup 5

    I've found a solution; UAG requires Basic Authentication over OWA.  For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
    http://technet.microsoft.com/en-us/library/ee921443.aspx
    Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue.  Though beware, you
    have do this on all your Client Access servers.  

  • How do I keep my new finder window preference set to open a certain folder on the server?

    Since switching to Lion, my new finder window preference keeps resetting itself to default. When I open a new finder window I want it to be a certain folder on our server. This setting was persistent in Snow Leopard. Now I have to keep setting it back, sometimes more than once a day. Please help, its very time consuming to have to click through to get to the folder I use most often every time I open a finder window.
    Mac Pro (early 2009)
    Processor 2.66 GHz Quad-core Intel Xeon
    Memory 8 GB 1066 Mhz DDR3ECC
    Graphics ATI Radeon HD 4870 512 MB
    Mac OS X Lion 10.7.1 (11B26)

    Enabling thirds-party cookies is the default and if there aren't any other changes made then Firefox will show "Remember History"
    Choosing the "Use custom settings for history" setting doesn't make any changes.<br />
    If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were If all History settings are default then you see "Firefox will: (Never) Remember History" and the custom settings are hidden.<br />

  • I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

    I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

    In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
    The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
    I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
    I replaced line
    <exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
    with
    <exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
    This works.

  • Explorer folder update issues Server 2008 R2 Terminal Server

    Hi Folks, 
    We are having a few issues here. We have a cluster of 5 Server 2008 X64 R2 SP1 Terminal Servers running Citrix Xenapp 6. Our file server is a Server 2008 R2 SP1 server also. All servers are virtualised on ESX vSphere 4.0 and are connected to an EMC
    FC SAN.
    The users have an application which references a mapped drive (K in this example). This mapped drive is populated with contents from a network scanner. The file extensions change from PDF, JPEG, JPG and GIF. The files are stored on the 2K8 X64 R2 file server. 
    This all works fine, however the users are getting intermittent 'refresh' problems if you will. Sometimes after the user scans to the folder they will not see the item which was scanned however another user on the _same_ server will be able to see the item
    that has just been scanned to file. If I login to the server via remote desktop I can also see the files also. It can take from 2minutes to 30minutes before the users explorer will actually refresh and be able to see the files. During this time if the user
    creates a folder in the my documents which is also redirected/hosted on the 2K8 R2 file server they see the changes immediately. If the user logs in and logs out of the Terminal Server the file which was scanned is immediately available to the user.
    **NOTE** this problem does not occur every time
    Below is a list of the things that I have tried
    Changing the Icon size and layout under explorer
    Changing the layout from thumbnails to list etc
    Disabled SMB 2.0
    Completed SMB tuning for Xenapp and Explorer on the limit of concurrent connections etc
    Disabled Windows Search
    Disabled Indexing
    Changed the folder to be both offline and online
    Index offline and online folders
    Disabled "Client for Microsoft Networks" on the network card
    Disabled IPV6 on both Terminal Servers and File server
    Ran filemon in compatibility mode on the file server (I can see the file being created)
    I have changed the scanning location on the 2K8 R2 file server to no avail
    I have checked the file share and it is indeed set to Maximum allow concurrent connections
    Checked Perfmon and the disk queue is running about 0.4 
    I'm now at a loss.. any advise would be great! thanks folks.

    Hi,
    Does this issue happen on a Windows client? Like the Windows 7 and Windows XP.
    Meanwhile, I would give you the following suggestions for your reference:
    1.      
    By default, Windows Explorer generates a lot of SMB traffic - which can result in poor file server performance in some circumstances. 
    However, some of this traffic is superfluous and can be reduced - for example:
    •Searches for Desktop.ini files used for folder customization
    •Periodic refreshes of folder contents
    •Searches for supporting library (.dll) files
    •Individual file details and attributes pulled for each file
    •Thumbnail extraction
    There are some registry changes you can implement to optimize the SMB traffic being generated. 
    Import the settings below on client machines. 
    Terminal Servers running in Application Mode should be considered client machines in this scenario.
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer]
    "UseDesktopIniCache"=dword:00000001
    "NoRemoteRecursiveEvents"=dword:00000001
    "NoRemoteChangeNotify"=dword:00000001
    "StartRunNoHOMEPATH"=dword:00000001
    "NoRecentDocsNetHood"=dword:00000001
    "NoDetailsThumbnailOnNetwork"=dword:00000001
    [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MRXSmb\Parameters]
    "InfoCacheLevel"=dword:00000010
    [HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\CryptoSignMenu]
    "SuppressionPolicy"=dword:00100000
    [HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\{3EA48300-8CF6-101B-84FB-666CCB9BCD32}]
    "SuppressionPolicy"=dword:00100000
    [HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\{883373C3-BF89-11D1-BE35-080036B11A03}]
    "SuppressionPolicy"=dword:00100000
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\SCAPI]
    "Flags"=dword:00100c02
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
    "SafeDllSearchMode"=dword:00000001
    "SafeProcessSearchMode"=dword:00000001
    For more information:
    Windows Explorer and SMB Traffic
    http://blogs.technet.com/b/askperf/archive/2007/09/21/windows-explorer-and-smb-traffic.aspx
    2.      
    Please try to temporarily disable all firewall and anti-virus software to check whether this issue can be fixed.
    3.      
    Please check if the problematic user is still on one switch. If so, I would guess there is an issue on switch.
    In this case, you’re using Citrix when this issue happens. I suggest you contact Citrix engineer to particularly ask whether they saw the
    similar issue running on Citrix and how to fix it.
    Thanks.

Maybe you are looking for