This is a LR CC bug report Upside down Watermark
A watermark I have used for years was just applied upside down. In fact, I exported 3 pictures and only one was upside down. Odd. Anyone else report this issue?
You might want to report that to Apple instead of to the other users in this forum.
http://www.apple.com/feedback/iphone.html
Similar Messages
-
This is more of a bug report rather than a question:
i have 2 ipods and an iPhone all running ios 6.1.3 and occasionally at random times the screens brightness turns all the way down, this hasnt happend before the update. the only way i know of to fix it is to restart my device. please fix this in next update.
Is the device jailbroken? I only ask because that is a known issue with jailbroken devices.
If it's not, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
BUG REPORT: Layers with 100% height in timeline knock bottommost layer(s) out of scrollable area
I have tried to post this twice to the official bug report page, but (somewhat hilariously) the bug report page bounces it back with an internal error about an unknown email address, so I'm posting here too just in case. As I have no idea how to report a bug about the bug report page, I decided I might as well just post the bug here.
CS5.5/Windows 7 - Verified on 6 different machines, some 64 bit, some 32 bit
If I have a layer in the timeline that has been expanded to 200% or 300% (via Layer Properties) height, the bottom-most layers gets pushed outside of the viewable area. The scrollbars simply don't scroll that far. I double-checked and this is new since CS4--which still works correctly--so never let it be said that the engineers aren't working on the code! :-/
Basically, I use this for audio layers, as it is nice to expand them to 200% so it's easier to see the waveform and guess where certain words are ending, etc when doing timeline syncing.
It can be worked around by expanding the timeline to be tall enough to bring everything into view, so I suspect the bug lies in the scrollable area calculation. However, since space is at a premium, usually I only have about 5-6 layers worth of space allocated to the timeline panel, so this bug hits me quite frequently (since I have all my old projects set up with 200% audio tracks).sam wrote:
I have the same soundcard (or at least the same modules loaded) and I'm getting good volume.
Things to check:
If you have the pcm and main volume all the way up in alsa mixer that should be it. You may have to adjust the volume separately if you use esd, arts, pulse, or jack (I don't use them).
Another thing to test is to make sure your using alsa not oss, and you may want to raise the oss level and see what happens.
The final thing is you want to check to see which sound device the audio programs are using (usually found in the preferences).
If none of that works, then you're out of luck. It would help if you post what sound programs you are using and what sound daemons you are using.
Here is my Daemons line from /etc/rc.conf
DAEMONS=(@syslog-ng @network @netfs @crond @alsa @hal @fam)
So i would think im using alsa not oss. but how would i go about raising the oss to make sure? there is no "oss" option in alsamixer. I have tried just abuot every audio progream there is and even firefox, all of them produce about half of the maximum volume level. -
Confused after reading bug report
Hello,
I'm working on a desktop application which utilizes the system tray. I have an icon set with a popup menu that is triggered when the user left-clicks on the icon. Originally I was using java.awt.PopupMenu but then came across javax.swing.JPopupMenu which looks a little nicer and has support for icons. For the most part it works great. However I noticed that when the user triggers the popup menu more than once (i.e. the user left-clicks the tray icon twice or more times), a ClassCastException is thrown. After doing a bit of searching, I came across [this bug report|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6583251] and many others describing the issue I was having.
According to the report, the evaluation is:
Everything is clear
we shouldn't cast mouseEvent.getSource() to Component without checkingUnfortunately this still leaves me a little confused. I mean, it does sort of let me know where the problem is happening (in the MouseListener portion of my Tray Menu where I am trying to detect the popup trigger), but I don't understand if this means that there is a way to prevent this from happening or not.
In other words, I think the bug is coming from this block of code (correct me if I am mistaken):
public void mouseReleased(MouseEvent e) {
if ( e.isPopupTrigger() ) {
this.setLocation( e.getX(), e.getY() );
this.setInvoker( this );
this.setVisible( true );
}Where e is apparently being casted to a Component, thus causing the error. Now, why this error occurs when the user clicks twice or more on the icon, I don't really understand. Ultimately, my question is: Is there any other way this can be written to prevent the error?
One solution would be to simply use java.awt.PopupMenu, but I want to make sure there isn't a better solution first as JPopupMenu looks much nicer.. but if I have no other option, I will of course substitute looks for function.
Any clarification would be greatly appreciated.
(Apologies if this is the wrong forum. I was originally going to post this in the Swing forum, but the error actually cites AWT, yet I'm using a Swing component.. so I figured the Java Programming forum would be alright. Well, please feel free to move it if necessary.)ejp wrote:
The exception stack trace tells you where the exception is being thrown from. It certainly isn't from that code, because there are no class casts of any kind there, let alone casts of e.getSource() to Component.Hi ejp, thank you for the response. My apologies.. I only assumed that e.isPopupTrigger() was throwing the exception because the bug report mentioned mouse events, and the stack trace doesn't specify where the error is within my code (e.g. the line, method, or even which class is throwing the error that I've written, though it does cite other Java classes not written by me). The e.getSource() in actionPerformed() was my next guess because that and the MouseListener are the only two places where I am detecting events. Nevertheless, I still don't believe that I am using casting, so I'm not sure how to fix this.
Here is the stack trace:
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: java.awt.TrayIcon cannot be cast to java.awt.Component
at javax.swing.plaf.basic.BasicPopupMenuUI$MouseGrabber.eventDispatched(Unknown Source)
at java.awt.Toolkit$SelectiveAWTEventListener.eventDispatched(Unknown Source)
at java.awt.Toolkit$ToolkitEventMulticaster.eventDispatched(Unknown Source)
at java.awt.Toolkit.notifyAWTEventListeners(Unknown Source)
at java.awt.TrayIcon.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: java.awt.TrayIcon cannot be cast to java.awt.Component
at javax.swing.plaf.basic.BasicPopupMenuUI$MouseGrabber.eventDispatched(Unknown Source)
at java.awt.Toolkit$SelectiveAWTEventListener.eventDispatched(Unknown Source)
at java.awt.Toolkit$ToolkitEventMulticaster.eventDispatched(Unknown Source)
at java.awt.Toolkit.notifyAWTEventListeners(Unknown Source)
at java.awt.TrayIcon.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)Below is my TrayMenu class extending JPopupMenu:
package gui.menus;
import gui.frames.TrayTweetFrame;
import java.awt.HeadlessException;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import javax.swing.ImageIcon;
import javax.swing.JMenuItem;
import javax.swing.JPopupMenu;
import util.Constants;
public class TrayMenu extends JPopupMenu implements ActionListener, MouseListener {
private JMenuItem exitMenuItem = null;
private TrayTweetFrame frame = null;
private JMenuItem minimizeMenuItem = null;
private JMenuItem restoreMenuItem = null;
private static final long serialVersionUID = 1L;
* Constructor
* @param TrayTweetFrame frame
* @throws HeadlessException
public TrayMenu ( TrayTweetFrame frame ) throws HeadlessException {
this.frame = frame;
this.initialize();
} // end constructor
* This method handles the events.
public void actionPerformed( ActionEvent e ) {
// Exit
if ( e.getSource().equals( getExitMenuItem() ) ) {
getFrame().exit();
// Restore or Minimize window
else if ( e.getSource().equals( getRestoreMenuItem() ) ||
e.getSource().equals( getMinimizeMenuItem() ) ) {
getFrame().minimize();
} // end method actionPerformed()
* This method initializes and returns
* the Exit menu item.
* @return MenuItem exitMenuItem
public JMenuItem getExitMenuItem() {
if ( exitMenuItem == null ) {
exitMenuItem = new JMenuItem( Constants.MENU_EXIT, new ImageIcon("img/icons/exit.png" ) );
exitMenuItem.addActionListener( this );
return exitMenuItem;
} // end method getExitMenuItem
* This method returns the frame.
* @return frame
public TrayTweetFrame getFrame() {
return frame;
} // end method getFrame
* This method initializes and returns
* the Minimize menu item.
* @return MenuItem minimizeMenuItem
public JMenuItem getMinimizeMenuItem() {
if ( minimizeMenuItem == null ) {
minimizeMenuItem = new JMenuItem( Constants.MENU_MINIMIZE, new ImageIcon("img/icons/minimize.png" ) );
minimizeMenuItem.addActionListener( this );
return minimizeMenuItem;
} // end method getMinimizeMenuItem
* This method initializes and returns
* the Restore menu item.
* @return MenuItem restoreMenuItem
public JMenuItem getRestoreMenuItem() {
if ( restoreMenuItem == null ) {
restoreMenuItem = new JMenuItem( Constants.MENU_RESTORE, new ImageIcon("img/icons/maximize.png" ) );
restoreMenuItem.addActionListener( this );
restoreMenuItem.setEnabled( false );
return restoreMenuItem;
} // end method getRestoreMenuItem
* This method initializes the menu.
private void initialize() {
this.add( getMinimizeMenuItem() ); // Minimize
this.add( getRestoreMenuItem() ); // Restore
this.addSeparator(); // --------
this.add( getExitMenuItem() ); // Exit
} // end method initialize
public void mouseClicked(MouseEvent e) {
// Check for double-click
if ( e.getClickCount() == 2 ) {
// Minimize to the system tray
getFrame().minimize();
} // end if
public void mouseEntered(MouseEvent e) {}
public void mouseExited(MouseEvent e) {}
public void mousePressed(MouseEvent e) {}
public void mouseReleased(MouseEvent e) {
if ( e.isPopupTrigger() ) {
this.setLocation( e.getX(), e.getY() );
this.setInvoker( this );
this.setVisible( true );
} // end class TrayMenuAm I doing something wrong? Like I said, I'm not casting (at least explicitly..), so I'm not sure why I'm getting a java.lang.ClassCastException error. Normally I can figure out problems like these with Google, but again, when I did Google this, I came across the bug report which describes my issue exactly (but at the same time, left me wondering what the solution is).
Again, any help is appreciated. Thanks again, ejp! -
Nokia video manager converts upside down
when i convert video with nokia video manager all videos play upside down on computer and nokia n93 any help
I also get this same problem were the video is upside down and mirrored. It is like this on the pc and phone. I have tried the latest codecs and different file formats but each time i get the same result.
I have found lots of post all over the net regarding this issue but as yet not found a resolution. Surely somebody knows what could be wrong. -
The Google toolbar doesn't recognize a left mouse click when selecting a 'suggestion'. It's OK using the keyboard, however. I have filed a bug report with Google, but as this is an important extension thought you should know.
See also: http://forums.adobe.com/message/4662367#4662367
-Noel -
Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)
-
Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down instead of returning to video playlist.
Restarting videos works and looks like video is getting deleted.
Just a bug reportYou might want to report that to Apple instead of to the other users in this forum.
http://www.apple.com/feedback/iphone.html -
Do discussions (threads) in this forum ever get elevated to bug reports seen by the Adobe dev's?
This forum is a fertile source of user feedback for Adobe. Is there a system in place to create tickets or bug reports or something like that out of issue brought up here? Seems like a good idea.
User to User forum.
Adobe may read some items here. That's up to the development teams. If the dev team sees something and is interested then it may perhaps get logged, But you should never assume anything on the forums is actually logged anywhere but here.
If you've found a bug, you should log it using the feadback link at the bottom of this (or any) page. -
On my iMac OSX, 10.9.4, Mavericks, I have been trying to view an album as a slide show. The slide show starts at the end (bottom row picture) instead of the beginning (top 1st picture). I have gone to View>Sort Photos>Manual. But the order of Ascending and Descending choices are greyed out with the default check by Ascending. How can I start at my beginning without rearranging all the photos? Also, some of the photos are upside down and sideways, even though they are correct in the album. How can I fix this?? Thank you! Also, can I include a video in the slide show? Up to how many seconds/minutes?
Is this a slideshow created directly from an album?
There's a bug with iPhoto 9.5 and Mavericks in that slideshows from Albums do not play correctly if they are sorted manually. Only photos that have been sorted by date, keyword, rating or title will play from albums correctly.
To have a slideshow with photos sorted manually use the slideshow mode in iPhoto.
Send a bug report to Apple via http://www.apple.com/feedback/iphoto.html. -
Solaris8 and 9 (possibly 7) /dev/poll driver bug report.
Hello,
I'd like to report a bug in the solaris 8 and 9 /dev/poll driver (poll(7d)).
As i do not have a support account with sun or anything like that, there
seems to be no other way to do that here (which is of course a very sad
thing).
Bug details:
The /dev/poll device provides an ioctl-request (DP_ISPOLLED) for checking
if a particular filedescriptor is currently in the set of monitored
filedescriptors for that particular /dev/poll fd set (open /dev/poll fd).
A quote from the documentation of the poll(7d) manual page taken from
Solaris9:
"DP_ISPOLLED ioctl allows you to query if a file descriptor is already in
the monitored set represented by fd. The fd field of the pollfd structure
indicates the file descriptor of interest. The DP_ISPOLLED ioctl returns 1
if the file descriptor is in the set. The events field contains the
currently polled events. The revents field contains 0. The ioctl returns 0
if the file descriptor is not in the set. The pollfd structure pointed by
pfd is not modified. The ioctl returns a -1 if the call fails."
It says that when you query for an filedescriptor which is currently being
monitored in the set, that it would return 1, and change the events field of
the pollfd structure to the events it's currently monitoring that fd for.
The revents field would be set to zero.
However the only thing which actually happens here, is that FD_ISPOLLED
returns 1 when the fd is in the set and 0 if not. When the fd is in the
set, when FD_ISPOLLED returns 1, the events field remains unmodified, but
the revents field gets changed.
A small sample code to illustrate:
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/devpoll.h>
main() {
struct pollfd a;
int dp_fd = open("/dev/poll", O_WRONLY);
a.fd = 0; /* stdin */
a.events = POLLIN; /* we monitor for readability, POLLIN=1 */
a.revents = 0;
write(dp_fd, &a, sizeof(a));
a.fd = 0;
a.events = 34; /* filled in with bogus number to show malfunctioning */
a.revents = 0;
printf("DP_ISPOLLED returns: %d\n", ioctl(dp_fd, DP_ISPOLLED, &a));
printf("a.fd=%d, a.events=%hd, a.revents=%hd\n", a.fd, a.events,
a.revents);
According to the documentation of /dev/poll and namely DP_ISPOLLED this
program is supposed to print the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=1, a.revents=0
However it prints the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=34, a.revents=1
You can take any number instead of '34' and it will simply remain untouched
after the DP_ISPOLLED ioctl-request.
I hope it's clear now that the solaris8 and solaris9 (and probably solaris7
with /dev/poll patch too) DP_ISPOLLED implementation is broken.
This bug is also easily illustrated by looking at the solaris8 kernel sourcecode:
<snippet osnet_volume/usr/src/uts/common/io/devpoll.c:dpioctl()>
case DP_ISPOLLED:
pollfd_t pollfd;
polldat_t *pdp;
if (pollfd.fd < 0) {
mutex_exit(&pcp->pc_lock);
break;
pdp = pcache_lookup_fd(pcp, pollfd.fd);
if ((pdp != NULL) && (pdp->pd_fd == pollfd.fd) &&
(pdp->pd_fp != NULL)) {
pollfd.revents = pdp->pd_events;
if (copyout(&pollfd, (caddr_t)arg,
sizeof(pollfd_t))) {
mutex_exit(&pcp->pc_lock);
DP_REFRELE(dpep);
return (set_errno(EFAULT));
*rvalp = 1;
</snippet>
its' clearly visible that the code writes the current monitored events to
the revents field:
'pollfd.revents = pdp->pd_events;'
and that it doesnt set revents to zero.
It's funny to see that this has been like this since Solaris8 (possibly 7). That means nobody ever used DP_ISPOLLED that way or people were simply to lazy to file a bug report.
Another funny thing related to this. is that Hewlett-Packard did seem to know about this. Since HP-UX11i version 1.6 they also support /dev/poll. From their manual page i ll quote some sentences from their WARNING session:
"The ioctl(DP_ISPOLLED) system call also returns its result in the revents member of the pollfd structure, in order to be compatible with the implementation of the /dev/poll driver by some other vendors."
Hopefully this will get fixed.
I also like to reexpress my very negative feelings towards the fact that you're not able to file bug reports when you do not have a support contract. Ridiculous.
Thanks,
bighawkHave I mentioned how much i love my playbook now Great job on os 2.0
-
Bug Report: The keyboard focus doesn't automatical...
Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
7. Move the system/keyboard focus in the chat entry edit field and keep it there.
8. Switch to another window, preferably from another application.
9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design -
Bug report: Naming a Bin after creating it with drag'n'drop
There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MP51.007F.B03
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
OS X 10.6.8Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it. -
Bug report: 3.2; DAC; GridControl; Navigation - Invalid reaction to mouse drag
Hi,
This is a bug report, I think.
I have a one-column GridControl with mandatory column. Normally, DAC framework prohibits from navigation out of empty field and emits one of those DAC-1002 or DAC-603 errors. The only exception I noticed was a double-click on another row. In this case navigation allowed but an error is still produced.
Today I was playing with this GridControl and discovered that I can drag the yellow frame across rows. And here comes a bug - GridControl doesn't change the current row on InfoBus according to current selection marked by yellow frame.
In my case it brings the following problem: if the cursor is placed on the new empty row, user drags the cursor to another row and then tries to use any other navigation means except dragging, he gets a navigation error. DAC framework still thinks that the current row is the empty one and produces an error telling that the attribute cannot be empty.
Dev Team, any comments?
Regards,
VladimirHmm... Nobody answers. I'll try another variation of the same question.
DAC framework implicitly validates attributes on the base of Mandatory constraint in the Entity Object definition. Is it possible to set the level of this validation? For example, I want to conduct validation only when user navigates out of the row or the whole rowset, but not when he just leaves a field.
Regards,
Vladimir -
Bug report: vpn (ipsec) interface number in snmp always change
Hi,
this is a bug report for RV082 hardware version 3 and 4, firmware version 1.x, 2.x and 4.x (all latest versions). I hope someone from cisco/belkin reads it.
Summary:
The snmp interface number of a VPN Tunnel change when the VPN tunnel disconnect and then re-connects.
What should happend:
The VPN Tunnel number 1, should always have the same snmp interface number. In RV082 v4, this number should always be 10. For example, the LAN, WAN1 and WAN2 always have the same snmp interface number.
What is the problem:
The VPN Tunnel number 1 change the snmp interface number, from 10, to 11, to 12, etc.
How to reproduce:
create a VPN Tunnel using 2 RV082 or 1 RV082 and 1 RV042. Once the VPN Tunnel is connected write down the snmp interface number. A few days later, disconnect the cable of block internet access. Then restore the internet conection and write down the snmp interface number, you should note that the snmp interface number have changed.
Tools used:
PRTG Network Monitor
Please take a look at the attached image, note all the "ppp" interfaces, theres only 1 VPN Tunnel (gateway-to-gateway) defined.Hi Tom,
many thanks for your reply.
I see that I have to call Tech-support, in order to report a very technical situation, explaining them this is a bug report and I want them to make a better product.
Since I won't pay a dime for this problem to be fixed, I can only see pain in this path(calling to speak with a tech support representative).
I also readed that Belkin has bought Linksys, so I don't know if the RV082 will remain with Cisco or will go with Belkin.
So, my only hope is to document this bug, that is pressent inall firmware version and hardware version of the RV082 as of today.
many thanks for your help,
regards,
Oliver
Maybe you are looking for
-
If I back up my iphone and then need to gather the info from the docs, how do I get the data without another iphone? Can I download the iphone info to an ipad to read it or will it affect my ipad?
-
Problem with book table of contents
Hi all We are switching from 9.3 version to 11.1.2 . Generating a book pdf, happen a strange thing: the table of contents page is generate in the summary of acrobat, but it contains the first page of reports, so all the book pages result switched of
-
Forms Personalization issue - Default GRE on Tax Balances form
Hi - Since we have only 1 GRE in our HRMS system, I am trying to populate ( basically default) the GRE name on the GRE field of the Tax Balances form. I chose when new form instance and in the action i am setting the value of field TAXSEL.GRE = 'Name
-
hi i recently reinstalled the audigy 2 value software but now the organizer wint burn my cd.it says no supported cd recording device is found.how do i fix this? coonsanders
-
WD ABAP : EMBED Internet PAGE Web on WebDynpro
Hi Experts, how can i embed an Internet Page (for exemple GOOGLE.COM) on my WebDynpro ABAP Application ... In order, i developped this code : data api_component type ref to if_wd_component. data window_manager type ref to if_wd_window_manager. d