This is a problem that is causing major tears
At the beginning of the year i bought a brand new iphone 5s with 32 GB!!! I barely have any apps, yes many pictures but so what? and some songs. However, i still get a message saying that I dont have anymoer available storage. I dont get how this is possible! Also, I just upgraded to 15 GB of icloud and it still says there is not enough room to back my phone up to iCLOUD so that was a waste of money! Then when i go to plug my iphone into my Macbook pro it says "the USB cord is not going to work becauae it is drawing too much power from your computer" so that does not sync to my itunes so I can back that up either. I cant delete anything from my phone such as pictures if It wont let me back them up to my computer. This is very frustrating. Please help
Unplug all other USB devices from your MBP. If you still get that message you probably need to replace the lightning cable. It's covered by warranty, so take it to an Apple store and they will replace it.
Pictures take up a lot of space. You need to copy them to your computer and delete them from the phone. So does music and videos. You can see how much space it being used by going to Settings/General/About.
Buying iCloud storage does not add any storage to your phone; it only adds storage to your cloud library for backups, Photo Stream, iTunes Match, etc.
Similar Messages
-
I'd like to know if there's a way to tell if I've loaded too much media into my premiere pro project?
I'm getting some interesting crashing issues and suspect it's because I've loaded a bunch of stuff into the project. I guess I could go through and start deleting stuff, but I'd like to know if there's a way to tell if that's the problem first.
I'm running cs6 latest 6.0.5. Macbook Pro i7, 16gb ram, 2tb external Gdrive storing media. I have cuda enabled.
Thanks a lot for any help!
GarettI copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
I do not know what you mean "cut & paist" how do I get the photo in from my picter folder if I do not drag it to the page in Pages?
I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
Want my books for sale on all the other formats and was told by Apple Pages whould do it...
I must be be out to lunch or the designers at Apple are ??? -
Dear Ms. Qaya Ltfabh help me. I do not know why this is a problem that has been part of Russian Tvlbarmn. What I Brgrdvnmsh Vnmydvnm again in English. Bkhvahydmytvnm send a screenshot if I tell you to see exactly my problem. Thank you
I also say that in English I dont know if Nmdarm Mykhvahydbh help me help in the form of a video file or image...Anglysym your friends know I'm so weak, so therefore the description Vsvalattvn noticed something. If you have software that will solve my problem please let me download it, I probably amI don't understand what question you are trying to ask. Can you restate the question?
-
I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.
If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done. -
Revision: 10214
Author: [email protected]
Date: 2009-09-13 07:33:58 -0700 (Sun, 13 Sep 2009)
Log Message:
This fixes the problem that if two text components share the same textFlow there is an infinite loop involving updateDisplayList -> damageHandler -> invalidateDisplaylist -> back to updateDisplayList. The bug file was for TextArea which is RET but the same bug was in RichText as well.
This example with a renderer exposed it because the typicalItem that is composed to figure out sizes and the actual first item in the list share the same textFlow. It actually has nothing to do with useVirtualDisplay other than it was sharing a textFlow.
It turns out that the TextFlowFactory dispatches damage events every time the textFlow is composed. Unlike when the flowComposer is used, it always considers the flow damaged. It was exacerbated by each of the two components having a damage handler for the same textFlow.
The solution is to use the textFlow generation number. In the damageHandler if the generation is the last known generation number, assume no changes, and return immediately from the damage handler.
QE notes: There are 1 TextArea, 6 TextInput and 2 NumericStepper failuers, with or without my changes. The common link seems to be DispatchKeyEvent. Most were testing maxChar, displayAsPassword and restrict. I tested these and they seem to be working correctly.
Doc notes:
Bugs: SDK-23002
Reviewer: Gordon
Tests run: checkintests, TextArea, TextInput and NumericStepper
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23002
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/RichEditable TextContainerManager.asRevision: 10214
Author: [email protected]
Date: 2009-09-13 07:33:58 -0700 (Sun, 13 Sep 2009)
Log Message:
This fixes the problem that if two text components share the same textFlow there is an infinite loop involving updateDisplayList -> damageHandler -> invalidateDisplaylist -> back to updateDisplayList. The bug file was for TextArea which is RET but the same bug was in RichText as well.
This example with a renderer exposed it because the typicalItem that is composed to figure out sizes and the actual first item in the list share the same textFlow. It actually has nothing to do with useVirtualDisplay other than it was sharing a textFlow.
It turns out that the TextFlowFactory dispatches damage events every time the textFlow is composed. Unlike when the flowComposer is used, it always considers the flow damaged. It was exacerbated by each of the two components having a damage handler for the same textFlow.
The solution is to use the textFlow generation number. In the damageHandler if the generation is the last known generation number, assume no changes, and return immediately from the damage handler.
QE notes: There are 1 TextArea, 6 TextInput and 2 NumericStepper failuers, with or without my changes. The common link seems to be DispatchKeyEvent. Most were testing maxChar, displayAsPassword and restrict. I tested these and they seem to be working correctly.
Doc notes:
Bugs: SDK-23002
Reviewer: Gordon
Tests run: checkintests, TextArea, TextInput and NumericStepper
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23002
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/RichEditable TextContainerManager.as -
This issue is making me start to think that I have a defective peice of equipment. It seems as though i have to restart the hotspot multiple times for it to work and when it does work it drops the device after being tether to it, and then I have to start the whole process over again.
I HAVE RESOLVED THIS!! The problem was that I was signed in to iCloud on my iphone with an old Apple ID and using a different Apple ID on my pc. I signed out of iCloud on my phone, then re-signed in with the same id as the iCloud on my pc. Presto chango. All is well.
-
I said it all in the title of this discussion.
infinitedot
Menu > File > Export > Pages '09
Apple could do lots of things but doesn't.
Peter Thomson
You have another issue. I have both Pages '09 v4.3 and Pages 5.1 running fine on Mavericks OSX 10.9.1.
Pages 5 is slow but neither Pages crashes.
If you are getting crashes you need to validate your fonts and check which documents are having the problem.
It also helps to know versions and how you installed your software.
Create your own post, don't jump onto another.
Peter -
Is this 401 error problem that bad?
If I cannot access the web page from the 192.168.1.1 and receive a 401 Error "Access Denied" am I dead in the water?
The Linksys 54G is working fine. I just want to change the network from unsecure to secure.
My question about unhooking the dsl cable wire and unplugging the wire is if I am just reinstalling the disk by just rebooting the disk from the d drive. I just want to know if I have to unplug the router and connect the dsl wire from the router and straight into the main computer. I just want to be able to use both the main computer and my laptop with secured network safety so that a drive by hacker can't use my wireless.If your username & password is not working ..... try admin password without any username ....
Also if nothing works... you need to reset the router for few seconds. ... once resetted ...reconfigure the router ...
You can try this steps to configure the wireless settings ....
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>Now
Click on the Sub tab under wireless > "Wireless Security" Change the
Wireless security mode to "WEP/WPA"...have a note of the key ... click save settings ... -
I was trying to install OS X Mountain Lion 10.8... and I got an error saying, "This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. I saw several other questions below of people having the same or similar problems. Does this mean that my hard drive is about to crash? I plan to head to the place I purchased and have it checked out. I backed up my data a couple of days ago. Any comments?
Yes, S.M.A.R.T. is a built-in diagnostic on the hard drive, and it is reporting a problem that may cause it to fail.
You can see the same status in Disk Utility, and possibly get more info. Run Disk Utility and select the DRIVE in the sidebar. Be sure to select the DRIVE and not the volume indented below it. At the bottom of the window, there is a field for S.M.A.R.T. Status. If there is no problem, it should say Verified.
You can also do a Get Info on the drive (File -> Get Info) in Disk Utility, and the Info window provides more detailed information (toward the bottom) about what is being checked. -
ITunes 8.1 Causes Major Problems on 2 Dell Systems
No problems with version 7 or 8.0. Upgraded to version 8.1 on two different Dell XPS desktops. On one, both internal cd/dvd drives are no longer recognized (they are shown as not working in device manager). On the other system, two USB ports are immediately disabled (again, shown as not working in device manager). The first system is about 4 years old and is 100% Intel while the second system is two years old and uses Nvidia mobo drivers with the Intel chipset. I always keep current system drive images (Acronis) and was able to recover by reverting to the earlier image(s), but the problems can ALWAYS be reproduced by installing version 8 of iTunes.
This is a problem that should be addressed, don't you think? I can't possibly be the only one experiencing these issues - though many others may not relate iTunes to hardware problems. And is there no way to get Apple Support to respond to thesye types of problems?
Message was edited by: Allan Grossman
Message was edited by: Allan GrossmanI uninstalled iTunes on an XP Pro SP3 system. The OS failed to recognize the CD with an error code 39 "The driver failed to load" etc.
I found and successfully implemented the following solution at this link:
http://www.geekswhoknow.com/articles/top10_dvd_and_cd_driveproblems.htm
It was problem #5 in their list.
5. Problem: XP - Cannot access the CD or DVD drive after an uninstall.
a. Start Registry editor as in Step 4 (just start regedit)
b. Locate MyComputer and then HKEYLOCALMACHINE
c. Expand System->CurrentControlSet->Control->Class
d. Click the subkey {4D36E965-E325-11CE-BFC1-08002BE10318}.
e. In the right pane, choose UpperFilters (ignore UpperFilters.back entry if present)
f. On the Edit menu, click Delete
g. Similarly delete the LowerFilters key in subkey {4D36E965-E325-11CE-BFC1-08002BE10318}.
h. Exit Registry Editor
i. Restart the computer
j. If the CD recording program does not work, re-install it and try again. -
I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?
This is some built-in "protection" that was engineered into Shockwave some years ago. It means that SW will ignore the first 10 script errors then throw the dialogue you are seeing. You really will have to contact the developer of the content in question to have it fixed - there's nothing anyone else can do. The developer needs to replicate your error, determine the cause, rectify it and republish their movie
-
I am having trouble connecting to internet with my iphone 5, Are there any issues with with iphone 5 that would cause this problem?
Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
http://support.apple.com/kb/TS1398
Regards. -
10.5.8 Install caused major problems
When I started this machine, I used Migration Assistant to move from a G4 to an Intel processor which apparently is a bad idea.
Finally, after 40+ hours of work and a half-dozen calls to Apple over months, I had to perform a clean install with 10.5.4, update to 10.5.7 and rebuild the data stores piece by piece. There were some problems, especially related to PERMISSIONS, but the new install seemed OK after spending another $100 on Disk Warrior 4 and rebuilding all the permissions.
Then (about 10 days later) I installed 10.5.8. Suddenly all my permissions were wrong -- I could not even use GET INFO. Spent four hours rebuilding what looked to be all permissions through the Disk Utility. Seemed that the major change was to "downgrade" permisions from 777 to 770, or something like that.
Seems generally OK, except now MAIL through IMAP GMAIL seems not to update properly.
Any known reason that a functioning machine suddenly needs to have all the permissions rewritten?
Any other suggestions?Thanks for the extensive suggestions. I always try to maintain two separate, up-to-date backup, one on Time Machine, one via Super Duper, in separate sites.
Excellent.
Thanks for the details, but what you suggest is what I finally had to do two weeks ago when I did the clean install that left me with permission problems, defined as repeated interruptions with the message "You cannot do "x" because you do not have permission."
Then there are three possibilities: 1) you didn't really do the install the way I said to and it wasn't really "clean", 2) you've got some kind of skanky third-party software installed that is causing the problem or 3) you have a very odd hardware problem. From the error messages regarding permissions, I would consider #3 to be extremely unlikely.
I got Disk Warrior because it was strongly advised by one of several telephone consultation with the Apple Expert after I was having problems with permissions. He said it was faster and more thorough in repairing permissions than Disk First Aid.
I think you must have misunderstood. DiskWarrior does not have anything to do with permissions, it rebuilds the drive's directory structure. I can't imagine someone in Apple support would have told you that it repairs permissions, though I suppose that's always a possibility.
As near as I could tell over a week or more of relatively intensive operation, after I adjusted all of the permissions, there were no further operating problems with the Mac (other than one Eudora crash)
One crash is not equal to "no further problems," and just because you haven't noticed the problems didn't mean they weren't there. The number one most common cause of problems following an update is a damaged system getting further damaged.
Your advice suggests that instead of trying to run my struggling nonprofit organization I should just quit and take up management of my MacBook.
Well now you're just getting whiny. What I told you to do will take some time, yes, but not more than a half-day's work to get back to a state that you could work from. Either do it or don't, but don't blame the advice.
I have been using Macs since the mid 1980's and this is a special problem.
If you really had been using Macs since the 1980s, you should know that there weren't permissions until *this decade*. There also weren't regular updates back then, since the internet was not commonly used and typical connection speeds were much slower. So of course it didn't happen back then. However, these days it is not a special problem, though it is not what I would call a common problem.
I should add perhaps that simultaneous with this series of problems with my Mac, the Foundation had a disk failure on a Dell laptop, still under warrantee. It took us ten days of staff effort, PLUS four more days and $800 in fees to a local Geek shop to get that fixed and all that Dell provided was a replacement hard disk.
How is this relevant?
I have been into my Annapolis Apple store twice during the trevails with the MacBook, but both times they were too busy helping people learn how to dial their iPhones to provide any real assistance.
Did you make an appointment? If you are going to bring a machine in for help, you need to have an appointment with a Genius. If you don't, you will wait. Or go home. You can make an appointment online at your local [Apple Retail Store page|http://www.apple.com/retail>. -
it has been only about a month that i bought my macbook pro 15 but it is heating up really fast on the left side even when the cpu usage is only 10%...i'm worried if this is a problem of the hardware?
The way something "feels" is very subjective. We would need to know your actual temps. You can install the free iStat Pro widget which is available as a download directly from Apple:
http://www.apple.com/downloads/dashboard/status/istatpro.html
Let us know what CPU temps you're seeing at the time you feel your machine is hot. As you indicated your CPU usage was only 10%, that would imply that you already know that heavy CPU usage would be one cause for your machine to be running on the warm side... but that doesn't seem to be the cause here. -
i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
<Re-Titled By Host>There often were more than one build of Apple computer per model number designation...
In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
And both of these were 14-inch display models.
•iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
•iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
•Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
There are a few fairly good repair guides online, some on http://iFixit.com site.
Here's the link to the early iBook G3 series, includes color + white dualUSB.
If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
•iBook G3 Repair guides - iFixit:
https://www.ifixit.com/Device/iBook_G3
Either of these may be able to run a system no later than OS X Tiger 10.4.11.
So a system install disc set could be used to troubleshoot, install, restore &
prepare a replacement hard drive for a new system.
Not certain what the issues are behind your situation, there may be more than
meets the eye. Some models of iBook were more prone to hardware problems
and as they age, fewer opportunities to affordably repair them exist.
Good luck in resolving the iBook G3 issues...!
Maybe you are looking for
-
Disk Utility and DiskWarrior trouble with external hard-drive.
I got an external hard-drive that doesn't show up on finder. On both Disk Utility and DiskWarrior it keeps mounting and unmounting. Disk Utility when trying to repair, spits this out when it unmounts... 2011-07-28 22:43:43 -0700: Problems were encoun
-
Hp 7510 Printer Still not able to access eFax!?
Why it is taking so long for HP to fix the issue regarding the eFax function on this printer? The reason I purchased this printer because of the fax funtion. But now, it keeps on saying "Connect to a Network"? will it is printing wireless from my pho
-
How can I get new tabs to open showing my home page?
When I open a new tab, it shows a blank page. How can I get it to open showing my home page?
-
Hello, I am trying to get my pages through Case Statement But... Can any one Help me.. here is my code.. This is my Buttons Code... My buttons are on 1st Frame of My FLA.. stop(); btn1.addEventListener(MouseEvent.CLICK, varTest); btn2.addEventListene
-
Best way to select several mysql table rows at random?
What is the best and quickest way to have one form button select multiple rows from a table with complete randomness? Can you also offer some explanation (or link to a good tutorial)- I am a beginner in myql and php. thanks p.s. the id column in my t