Thread will hang if no http response from TP

i found out 1 case that Oracle B2B thread will hang if it does not receive HTTP reponse from TP after posting messages to TP.
we use Async MDN.
example 1:
i send ORDERS to TP and expect HTTP response to close the transaction but my TP failed to send HTTP response due to proxy problem. then that particular thread will remain like that forever and no timeout.
example 2:
i receive ORDERS from TP and send the MDN back to my TP, again the thread will hang forever if no HTTP response from TP.
eventually all the thread will hang and no more messages can be process, then i have to restart the B2BService to clean all the hanged thread.

Please get us the b2b.log. And, information like midtier shiphome (version) used also would help.
If you are running it on linux, please recreate the scenario and get a thread dump. Here's the command,
kill -3 <B2BServer process id>
You could reach me at [email protected]
Thanks,
Sinkar

Similar Messages

  • 2013 Exchange, Can't connect to Exchange Management Shell. It cannot determine the content type of the HTTP response from the destination computer.

    The following error occurs.
             Welcome to the Exchange Management Shell!
    Full list of cmdlets: Get-Command
    Only Exchange cmdlets: Get-ExCommand
    Cmdlets that match a specific string: Help *<string>*
    Get general help: Help
    Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
    Show quick reference guide: QuickRef
    Exchange team blog: Get-ExBlog
    Show full output for a command: <command> | Format-List
    Tip of the day #0:
    Did you know that the Identity parameter is a "positional parameter"? That means you can use:
     Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
    It's a neat usability shortcut!
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
    At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
    +     $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.: mail1.dorothy.local
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Randy Cheek

    Good Morning,
    Log into the server with an account that has appropriate Exchange rights, not a local account.  
    Note: By default - Domain Admins don't have Exchange rights.
    Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
    My Technical Blog: http://thelifestrategist.wordpress.com
    Discipline is the Difference between Goals and Accomplishments
    If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer"

  • TMS 14.3.2 - No HTTPS Response from devices (again) - Looks like permissions issues (but possibly down to NetBIOS over TCP/IP)

    Hi All,
    Sometime ago I posted regarding an issue I was seeing on our TMS , where most of the remote devices seemingly showed up as loosing remote connection (no HTTPS Response - https://supportforums.cisco.com/discussion/12290956/tms-lost-https-communciation-devices-not-really). However, I could not figure out the root cause of the error, and now I have managed to break things again - probably due to a Java upgrade which broke TMSPE (see https://supportforums.cisco.com/discussion/12404166/looks-latest-update-java-8-update-31-will-break-tmspe-11).
    However, I thought I would look at little more closely this time to see if I could figure out the problem.
    I am seeing a lot of entries in the Security Log in TMS that seem to indicated that my the account used from a TMSPE connection has a bad or invalid password (this is set in "Administrative Tools --> Configuration --> Provisioning Extension Settings", but this password is correct (I can log into TMS with this account, and reset and restarted services etc).
    The computer attempted to validate the credentials for an account.
    Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
    Logon Account: tmspeconnect
    Source Workstation: TMS
    Error Code: 0xc0000064
    and
    An account failed to log on.
    Subject:
    Security ID: IIS APPPOOL\TMSNet40AppPool
    Account Name: TMSNet40AppPool
    Account Domain: IIS APPPOOL
    Logon ID: 0x214b6
    Logon Type: 8
    Account For Which Logon Failed:
    Security ID: NULL SID
    Account Name: tmspeconnect
    Account Domain: TMS
    Failure Information:
    Failure Reason: Unknown user name or bad password.
    Status: 0xc000006d
    Sub Status: 0xc0000064
    Process Information:
    Caller Process ID: 0x860
    Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
    Network Information:
    Workstation Name: TMS
    Source Network Address: 127.0.0.1
    Source Port: 62114
    Detailed Authentication Information:
    Logon Process: Advapi
    Authentication Package: Negotiate
    Transited Services: -
    Package Name (NTLM only): -
    Key Length: 0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
    - Transited services indicate which intermediate services have participated in this logon request.
    - Package name indicates which sub-protocol was used among the NTLM protocols.
    - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    I just wanted to check this like file/folder NTFS permissions, or any specific IIS permission . Is there a list of NTFS folder permissions for which the TMS required with regard to the "IIS APPPOOL", and perhaps what may need to be check in IIS?
    Oddly, the error list above refers the our "TMSPEConnect" account from the TMS domain, however this is incorrect - TMS is the machine name. Still we ARE seeing similar error which reference the actual domain name, such as:
    An account failed to log on.
    Subject:
    Security ID: IIS APPPOOL\TMSNet40AppPool
    Account Name: TMSNet40AppPool
    Account Domain: IIS APPPOOL
    Logon ID: 0x49e55
    Logon Type: 8
    Account For Which Logon Failed:
    Security ID: NULL SID
    Account Name: tmspeconnect
    Account Domain: mydomain
    Failure Information:
    Failure Reason: Unknown user name or bad password.
    Status: 0xc000006d
    Sub Status: 0xc000006a
    Process Information:
    Caller Process ID: 0xb18
    Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
    Network Information:
    Workstation Name: TMS
    Source Network Address: 1.1.1.1 (changed external IP)
    Source Port: 47620
    Detailed Authentication Information:
    Logon Process: Advapi
    Authentication Package: Negotiate
    Transited Services: -
    Package Name (NTLM only): -
    Key Length: 0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
    - Transited services indicate which intermediate services have participated in this logon request.
    - Package name indicates which sub-protocol was used among the NTLM protocols.
    - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Idea welcome.
    Cheers
    Chris

    Hi all,
    After a long a fraught weekend trying to fix things, I am not that much further on, but I am beginning to understand what it isn't........ I think :(
    It looks as though the "DatabaseScanning" service, or anything that runs under the credentials of the "nt authority\network service" seems to have a problem.
    The Audit log show lot of entries where services such as"TMSWebPublic" running under the ISS Application pool "tmsnet40apppool", and actions launched under our own credential appear to communicate just fine with the device, only for the 'network service' to time out the connection a short while later. The same goes for some (not all) of the Phone book updates, which also looks as though it runs under the credentials of the 'Network Service' account.
    26/01/2015 08:30:54
    nt authority\network service
    Update
    System
    our-ctrl1
    System status
    NoResponse
    TMSDatabaseScannerService
    26/01/2015 08:30:54
    nt authority\network service
    Update
    System
    our-ctrl1
    Connection status
    NoHTTPSResponse
    TMSDatabaseScannerService
    26/01/2015 08:29:06
    tmsnet40apppool
    Update
    System
    our-ctr1l
    System status
    Idle
    TMSWebPublic
    26/01/2015 08:29:06
    tmsnet40apppool
    Update
    System
    our-ctrl1
    Connection status
    OK
    TMSWebPublic
    However, I still don't know at this point is this is related to the actual TMS front end, something to do with the domain and policies that have been applied to TMS, or the actual database, or even just communication with the back end database??? I did try running the services under a domain user (service) account, but then ran into other issues as I couldn't log into TMS.
    BTW, removing TMS, and IIS and reinstalling did fix my second issue relating to the 'Communication Errors'.
    Chris

  • How to see http response from an axis web service call (Eclipse)

    Hello,
    I would like to see the raw http response which is returned from web service calls. I have a dynamic web project in Eclipse which uses a local instance of Tomcat 6. I'm using all of the default setting for a top-down web service generated from a WSDL file. I've generated the client using the built-in "generate client" using default settings.
    I've tried using the Eclipse plugin TCP/IP monitor and apache's TCPMON, but I am only able to see the http request, not the http response returned from the web server I am querying.
    I've seen some sparse documentation outlining how to use logging handlers and a client-config.wsdd file, but I haven't been able to get that working.
    So to recap, I'm looking for a way to view raw http responses using a web service client and server generated from a WSDL file in eclipse. I don't mind creating a new project using different code-generating libraries if someone has an easy way to do this using a different configuration.
    Thanks very much,
    Craig

    908794 wrote:
    Hello,
    I would like to see the raw http response which is returned from web service calls.Why the HTTP response? Isn't the soap message body enough? If it is, you probably want to check out SoapUI.
    A simple google query for "apache axis2 http response" also return this article:
    http://blogs.cocoondev.org/dims/archives/004668.html
    And finally, you did go through the Axis2 website right? It has a wiki with a rather staggering amount of articles in there.
    http://wiki.apache.org/ws/FrontPage/Axis2/

  • 2008 MBP 5,1 hangs up with no response from kb/tp/mouse, 2008 MBP 5,1 hangs up with no response from kb/tp/mouse

    My late 2008 MBP 5,1 is hanging up with no response to the keyboard/mouse/trackpad & hence no diagnostics that I know of.  I did see my wife's userid running Safari have the screen go berserk with random moving black & white "snow" before the whole display became unreadable.   Reboot & everything appears normal at this time but the hang-ups are constant.   I am running OS X 10.10.
    Any suggestions/help would be appreciated.
    Thanks in advance...billgr0248

    I don't know where the comments about the phone & all came from...I am running OS X 10.10.

  • Unable to read http response from servlet (on nokia 6630 device)

    I am sending a http GET request to a servlet for getting some response. Though I am able to obtain the response when I run my j2me app on sony phone I am not able to get any response in case of nokia. On being asked for the APN on nokia I do select the correct one and my settings are correct too. Moreover I am able to connect to the servlet without any problems from my nokia device. However when I tried to read from the Input stream the value returned by read() is -1.
    The code works fine on emulator also. Here is the code snippet being used by me. Plz help me solve this problem. Your response shall be definitely appreciated by me.
    Code in servlet:
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {       
            String t_username = request.getParameter("user");
            String t_password = request.getParameter("pass");
            URL url = new URL("http://somehost:80/query.cgi?serv=s1&user=" + t_username + "&pass=" + t_password);
            HttpURLConnection head = (HttpURLConnection)url.openConnection();
            head.connect();
            int contentLen = head.getContentLength();
            System.out.println("content length = " + contentLen); //here I get some content length value as expected
            BufferedReader in = new BufferedReader(new InputStreamReader(head.getInputStream()));
            StringBuffer sb = new StringBuffer(contentLen);
            String data = null;
            final String NEWLINE = "\r\n"; //acts as delimiter for parsing response later in my j2me code
            while((data = in.readLine()) != null)
                sb.append(data).append(NEWLINE);
            sb.append(NEWLINE);
            in.close();
            PrintWriter out = response.getWriter();
            out.print(sb.toString());
            out.flush();
            out.close();
            head.disconnect();
        }Code in J2ME:
    public static byte[] readFromHttpConnection(String p_URL) throws ConnectionNotFoundException, IOException {
            if(p_URL.startsWith("http://") || p_URL.startsWith("https://")) {
                HttpConnection c = null;
                DataInputStream dis = null;   //tried using InputStream also...still value returned by read() is -1
                c = (HttpConnection)Connector.open(p_URL);
                c.setRequestMethod(HttpConnection.GET);
                c.setRequestProperty("Content-Type", "application/octet-stream");
                dis = c.openDataInputStream();   //able to open this stream
                int len = (int)c.getLength();    //here i get len as -1 for both sony and nokia
                byte[] t_data = null;
                if(len > 0)
                    t_data = new byte[len];
                    int offset = 0;
                    int numRead = 0;
                    while((numRead = dis.read(t_data, offset, t_data.length-offset)) > 0) {
                        offset += numRead;
                else //since i get content length as -1 for both sony and nokia, this block is executed, and though
                       //I am able to read data on sony on nokia read() returns value -1 from the start itself
                    ByteArrayOutputStream bs = new ByteArrayOutputStream();
                    int ch;
                    while((ch = dis.read()) != -1)
                        bs.write(ch);
                    t_data = bs.toByteArray();
                dis.close();
                c.close();
                dis = null;
                c = null;
                return t_data;
            return null;
        }Edited by: alprazolam on Oct 16, 2007 6:02 AM
    Edited by: alprazolam on Oct 16, 2007 6:04 AM
    Edited by: alprazolam on Oct 16, 2007 6:07 AM

    Strange, this should be fine. You might want to try a more efficient (and shorter and faster) read code:
    byte[] buffer = new byte[512];
    ByteArrayOutputStream  = new ByteArrayOutputStream();
    int b;
    while((b=dis.read(buffer))!=-1){
      bs.write(buffer,0,b);
    t_data = bs.toByteArray();No need to check for content length, and always fast. I hope this helps...

  • Acrobat XI hangs when adding a response from distributed form, when specific form field is filled

    As the question says, when using the distribute form functionality of Acrobat, it hangs at the step of importing or adding a filled form, when a specific field on the form is filled.  It happens whether the tracker automatically detects it when I open the distributed form and asks me to add it, or I manually try to add it in the responses form. Here's the screenshot of when I tried manually adding it.  The first line is the one that hangs and is missing all fields except that "Approved" check box.  But it's the last field "ApprovedDate" that makes it hangs if it's filled in the form.  The Progress dialog just stays there forever and I can't click cancel.  When it tries to add it automatically, nothing appears on the screen, the form just stays open and the tracker doesn't come up.  I'm on Windows 7, Acrobat XI Pro.  I can send you the form if needed.
    Edit: I investigated further and there were Java scripts associated with that date field.  These would have been added while creating the form in Acrobat; I don't remember how exactly, but I only meant to validate the date format.  I've removed all the scripts and reset the desired date format on the field and it seems to work now.

    I use Mavericks and Acrobat XI. I haven't had any issues so far.

  • Not getting response from Client Proxy

    Hi,
    We are developing a scenario - File->PI->Proxy using ABAP Proxies.We are posting a file thru PI 7.0 to R/3 .In R/3 the server proxy(Inbound Asynchronous) will receive the message and BAPI will be called. The response from the BAPI will be reaching the server proxy and passed to the client proxy(Outbound Asynchronous).
       Server Proxy(request) --> BAPI --> Server Proxy(response) --> Client Proxy(response)
    The response from the client proxy has to be send to PI and a file will be generated as the output.
    Can anyone provide me suggestions to call client proxy from a server proxy by passing the response message to client proxy???
    Thanks in advance.
    Regards,
    Dibyajyoti

    Hi,
    I hope, you are done till the Implementation of Server Proxy, where you are calling a Bapi and passing the Input variables the Interface received and BAPI is giving a response back.
    Now your question, how to send the response back Asynchronously.
    I think, you have to do the same, what you do for a client proxy  and at last  call the method EXECUTE_ASYNCHRONOUS before the Final Commit Staement. I think this should work.
    But using Synchronous Interface in such cases is always a handy and easier option.
    Regards,
    Subhendu

  • LMS 3.2 SP1 - Syslog Report times out / CW14: NO HTTP response

    Hi,
    in Device Center I can´t start the Syslog Report, it opens a new Browser window and times out.
    If I start the "Device Troubleshooting" from the Device Center, all checks are successful. Just the check "Syslog Message" show the error: CW14: NO HTTP response from Servername
    I have LMS 3.2 SP 1 installed
    I already re set the System Identity User and restarted the daemon, no success.
    What should I check? Is it a known problem ?
    Best regards,
    Patrick
    UP

    Hey,
    i maybe found the failure.
    In the dir "CSCOpx\databases\rmeng" the following files are very big.
    So I started a immediate syslog purge job, but it failed.
     [ Thu Jul 28  09:00:33 CEST 2011 ],INFO ,[main],Starting purge job 5349
     [ Thu Jul 28  09:00:33 CEST 2011 ],INFO ,[main], Its a force Purge job
     [ Thu Jul 28  09:02:21 CEST 2011 ],ERROR,[main],Drop table failed:SQL Anywhere Error -210: User 'DBA' has the row in 'SYSLOG_20110627' locked 8405 42W18
     [ Thu Jul 28  09:02:21 CEST 2011 ],ERROR,[main],Failed to purge syslogs
     [ Thu Jul 28  09:02:22 CEST 2011 ],ERROR,[main],Purge not successful
    Can anyone say me, how to fix it?
    Best regards
    Patrick

  • Write binary files to HTTP response using Webtoolkit

    We are using Webtoolkit to generate HTTP responses from stored procedures. This works fine for generating HTMLs.
    However, the functions used for HTML generation ( htp.print , htp.prn ) support only plain text (they handle only VARCHARs).
    How can we generate binary HTTP response (e.g. PDF/DOC files) ? What are the packages/functions which provide this functionality ?
    Thanks,
    Subodh

    You can still use the built in Oracle procedure.
    wpg_docload.download_file(v_blob);
    Write Your procedure as follows:
    1. Load the BLOB from a table or from disk (BFile) into a BLOB object.
    2. Set your HTTP headers.
    3. Send your HTTP response.
    (some stuff omitted)
    owa_util.mime_header(type_mime, FALSE);
    htp.p('Content-Length: ' || v_size);
    owa_util.http_header_close;
    wpg_docload.download_file(v_blob);
    Remember, you can use Oracle's owa_util package to set things or do it yourself manually. Also, you can substitute wpg_docload.download_file for your own code (using RAW) but your making it more complicated.

  • Check standard HTTP response code for 301

    Hello, EveryBody, I have an error when i deployment a sao project ,
    [11:26:11 AM] Deploying profile...
    [11:26:11 AM] Wrote SAR file to C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
    [11:26:11 AM] Deploying sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
    [11:26:11 AM] Processing sar=/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
    [11:26:11 AM] Adding sar file - C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
    [11:26:11 AM] Preparing to send HTTP request for deployment
    [11:26:11 AM] Creating HTTP connection to host:crmserver, port:7001
    [11:26:11 AM] Sending internal deployment descriptor
    [11:26:11 AM] Sending archive - sca_WCPumaReceiveProject_rev1.0.jar
    [11:26:11 AM] Received HTTP response from the server, response code=301
    [11:26:11 AM] Problem in sending HTTP request to the server. Check standard HTTP response code for 301
    [11:26:11 AM] Error deploying archive sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
    [11:26:11 AM] HTTP error code returned [301]
    [11:26:11 AM] No error message is returned from the server.
    [11:26:11 AM] #### Deployment incomplete. ####
    [11:26:11 AM] Error deploying archive file:/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    I user soa version 11.1.1, jdevelop 11.1.1, everybody who tell the answer,
    thank you very much!

    I try http://fujiulnsd3t:8001/soa-infra and get the following information.
    ===========================================================================
    Welcome to the Oracle SOA Platform on WebLogic
    SOA Version: v11.1.1.2.0 - 11.1.1.2.0_091103.1205.1216 built on Tue Nov 03 13:48:58 PST 2009
    WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 (10.3.2.0)
    There are no composites deployed to the platform

  • [Forum FAQ] How to display an image from Http response in Reporting Services?

    Question:
    There is a kind of scenario that users want to display an image which is from URL. In Reporting Services, if the URL points to an image file, we can directly display it by typing the URL in embedded image. However, some URLs are just sending Http requests
    to server side, then redirect to another position and the server will return the image. For these kind of URLs, Reporting Services can’t directly render the image from Http response.
    Answer:
    To achieve this goal, we can add custom code into the report. Pass the URL as argument into our custom function so that we can create HttpRequest and get the HttpResponse. Then we can use custom function to return the Bytes() from the HttpResponse and render
    it into an image in report.
    Ps: In Reporting Services, it only support drawing Bytes() array into image, so we need to have our custom function return Bytes array.
    Add the assembly and custom code into the report.
    Public shared Function GetImageFromByte(Byval URL as String) As byte() 
                    Dim photo as System.Drawing.Image 
             Dim Request As System.Net.HttpWebRequest 
           Dim Response As System.Net.HttpWebResponse 
                  Request = System.Net.WebRequest.Create(URL)         
                     Response = CType(Request.GetResponse, System.Net.WebResponse) 
                 If Request.HaveResponse Then  
                      If Response.StatusCode = Net.HttpStatusCode.OK Then                    
                           photo = System.Drawing.Image.FromStream(Response.GetResponseStream) 
                     End If 
                 End If 
                  Dim ms AS System.IO.MemoryStream = new System.IO.MemoryStream() 
                 photo.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg) 
                    Dim imagedata as byte()  
                    imagedata = ms.GetBuffer()  
                    return imagedata
    End Function
    Grant the permission for assemblies. 
    Go to: 
    C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\RSpreviewPolicy.config 
    C:\Program Files\Microsoft SQL Server\MSSQL\Reporting Services\ReportServer\rssrvpolicy.config
    Give “FullTrust” for Report_Expressions_Default_Permissions.
    Insert an image into report. 
    Expression:
    =Code.GetImageFromByte("https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcSrVwPoAtlcA2A3KaiAJi-XjS4icr1QUnKYr7uzpX3IL3g2GPisAQ")
    The Result looks below:
    Applies to:
    Reporting Services 2005
    Reporting Services 2008
    Reporting Services 2008 R2
    Reporting Services 2012
    Reporting Services 2014
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    >
    Hi, I'd like to display a dynamic image from the web inside a JLabel or any other swing component it could work in. I've been looking on the Swing tutorials and others forums, all I can have is that a JLabel can load an Icon object, defined by an image URL, but can this URL be like "http://xxxxx/image.jpg" somehow or can it only be a local image URL?>
    I do not know why you start talking about an image on the web then go on to show concerns about whether it will work for a 'local' URL.
    But perhaps this answer will cover the possibilities.
    So long as you can from an URL to the image, and the bytes are available for download (e.g. some web sites wrap a direct call to an image in HTML that embeds the image), the URL based icon constructors will successfully load it.
    It does not matter if that URL points to
    - a web site,
    - a local server ('localhost'),
    - an URL representation of a File on the local file system, or
    - it is inside a Jar file that is on the application's run-time classpath.
    How you go about forming a valid URL to a 'local resources' (or indeed what you regard as local resources) is another matter, depending on the form of the project, and how the resources are stored (see list above).
    Probably the main reason that examples use images at a hard coded URL on the net is that it makes an 'image example' self contained. As soon as we compile and run it, we can see the result. I have posted a few examples like that on these forums.
    Edit 1:
    BTW - Welcome to the Sun forums
    Edited by: AndrewThompson64 on Apr 21, 2009 12:15 PM

  • No response from server HTTP 500

    Hi all,
    I am new to Widget world (in fact this is the first one). I am trying to implement Job Monitoring widget as explained in the weblog:
    /people/sergio.cipolla/blog/2007/02/19/widgets-benefits-jobs-monitor-video
    I have created wrapper function module : ZBP_JOB_SELECT_SM37B
    Created Webservice called:  ZBP_JOB_SELECT_SM37B
    I tested this web service (via web browser providing WSDL url in web services navigator) and it is working fine.
    When i specify the web service URL in Widget prefernces and click on search, i m getting error "No response from server". I have followed all the steps mentioned in the web log but still i am getting errors.
    I am accessing internet via proxy. Can this be a issue?
    Also i read other posts regarding the same issue, which suggested to Enable all logons in SICF. Can some one give details as how to enable all logons in SICF?
    Correct answers will be rewarded.
    Thanks a lot.
    Rashmi

    Hi Sergio,
    The WSDL is:
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <wsdl:types>
    - <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
    - <xsd:simpleType name="RfcException.Message.Number">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="3" />
      <xsd:pattern value="\d*" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char1">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="1" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char10">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="10" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char12">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="12" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char128">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="128" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char18">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="18" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char2">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="2" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char20">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="20" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char32">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="32" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char40">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="40" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char64">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="64" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char70">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="70" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="char8">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="8" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="clnt3">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="3" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="date">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="10" />
      <xsd:pattern value="\d\d\d\d-\d\d-\d\d" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="numeric2">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="2" />
      <xsd:pattern value="\d*" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="numeric3">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="3" />
      <xsd:pattern value="\d*" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:simpleType name="time">
    - <xsd:restriction base="xsd:string">
      <xsd:maxLength value="8" />
      <xsd:pattern value="\d\d:\d\d:\d\d" />
      </xsd:restriction>
      </xsd:simpleType>
    - <xsd:complexType name="TBTCJOB">
    - <xsd:sequence>
      <xsd:element name="JOBNAME" type="tns:char32" />
      <xsd:element name="JOBCOUNT" type="tns:char8" />
      <xsd:element name="JOBGROUP" type="tns:char12" />
      <xsd:element name="INTREPORT" type="tns:char40" />
      <xsd:element name="STEPCOUNT" type="xsd:int" />
      <xsd:element name="SDLSTRTDT" type="tns:date" />
      <xsd:element name="SDLSTRTTM" type="tns:time" />
      <xsd:element name="BTCSYSTEM" type="tns:char32" />
      <xsd:element name="SDLDATE" type="tns:date" />
      <xsd:element name="SDLTIME" type="tns:time" />
      <xsd:element name="SDLUNAME" type="tns:char12" />
      <xsd:element name="LASTCHDATE" type="tns:date" />
      <xsd:element name="LASTCHTIME" type="tns:time" />
      <xsd:element name="LASTCHNAME" type="tns:char12" />
      <xsd:element name="RELDATE" type="tns:date" />
      <xsd:element name="RELTIME" type="tns:time" />
      <xsd:element name="RELUNAME" type="tns:char12" />
      <xsd:element name="STRTDATE" type="tns:date" />
      <xsd:element name="STRTTIME" type="tns:time" />
      <xsd:element name="ENDDATE" type="tns:date" />
      <xsd:element name="ENDTIME" type="tns:time" />
      <xsd:element name="PRDMINS" type="tns:numeric2" />
      <xsd:element name="PRDHOURS" type="tns:numeric2" />
      <xsd:element name="PRDDAYS" type="tns:numeric3" />
      <xsd:element name="PRDWEEKS" type="tns:numeric2" />
      <xsd:element name="PRDMONTHS" type="tns:numeric2" />
      <xsd:element name="PERIODIC" type="tns:char1" />
      <xsd:element name="DELANFREP" type="tns:char1" />
      <xsd:element name="EMERGMODE" type="tns:char1" />
      <xsd:element name="STATUS" type="tns:char1" />
      <xsd:element name="NEWFLAG" type="tns:char1" />
      <xsd:element name="AUTHCKNAM" type="tns:char12" />
      <xsd:element name="AUTHCKMAN" type="tns:clnt3" />
      <xsd:element name="SUCCNUM" type="xsd:int" />
      <xsd:element name="PREDNUM" type="xsd:int" />
      <xsd:element name="JOBLOG" type="tns:char20" />
      <xsd:element name="LASTSTRTDT" type="tns:date" />
      <xsd:element name="LASTSTRTTM" type="tns:time" />
      <xsd:element name="WPNUMBER" type="xsd:int" />
      <xsd:element name="WPPROCID" type="xsd:int" />
      <xsd:element name="EVENTID" type="tns:char32" />
      <xsd:element name="EVENTPARM" type="tns:char64" />
      <xsd:element name="BTCSYSREAX" type="tns:char32" />
      <xsd:element name="JOBCLASS" type="tns:char1" />
      <xsd:element name="PRIORITY" type="xsd:int" />
      <xsd:element name="EVENTCOUNT" type="tns:char8" />
      <xsd:element name="CHECKSTAT" type="tns:char1" />
      <xsd:element name="CALENDARID" type="tns:char2" />
      <xsd:element name="PRDBEHAV" type="tns:char1" />
      <xsd:element name="EXECSERVER" type="tns:char20" />
      <xsd:element name="EOMCORRECT" type="xsd:int" />
      <xsd:element name="CALCORRECT" type="xsd:int" />
      <xsd:element name="REAXSERVER" type="tns:char20" />
      <xsd:element name="RECLOGSYS" type="tns:char10" />
      <xsd:element name="RECOBJTYPE" type="tns:char10" />
      <xsd:element name="RECOBJKEY" type="tns:char70" />
      <xsd:element name="RECDESCRIB" type="tns:char10" />
      <xsd:element name="TGTSRVGRP" type="tns:char40" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:complexType name="TBTCJOB_BK">
    - <xsd:sequence>
      <xsd:element name="JOBNAME" type="tns:char32" />
      <xsd:element name="JOBCOUNT" type="tns:char8" />
      <xsd:element name="JOBGROUP" type="tns:char12" />
      <xsd:element name="INTREPORT" type="tns:char40" />
      <xsd:element name="STEPCOUNT" type="xsd:int" />
      <xsd:element name="SDLSTRTDT" type="tns:date" />
      <xsd:element name="SDLSTRTTM" type="tns:time" />
      <xsd:element name="BTCSYSTEM" type="tns:char32" />
      <xsd:element name="SDLDATE" type="tns:date" />
      <xsd:element name="SDLTIME" type="tns:time" />
      <xsd:element name="SDLUNAME" type="tns:char12" />
      <xsd:element name="LASTCHDATE" type="tns:date" />
      <xsd:element name="LASTCHTIME" type="tns:time" />
      <xsd:element name="LASTCHNAME" type="tns:char12" />
      <xsd:element name="RELDATE" type="tns:date" />
      <xsd:element name="RELTIME" type="tns:time" />
      <xsd:element name="RELUNAME" type="tns:char12" />
      <xsd:element name="STRTDATE" type="tns:date" />
      <xsd:element name="STRTTIME" type="tns:time" />
      <xsd:element name="ENDDATE" type="tns:date" />
      <xsd:element name="ENDTIME" type="tns:time" />
      <xsd:element name="PRDMINS" type="tns:numeric2" />
      <xsd:element name="PRDHOURS" type="tns:numeric2" />
      <xsd:element name="PRDDAYS" type="tns:numeric3" />
      <xsd:element name="PRDWEEKS" type="tns:numeric2" />
      <xsd:element name="PRDMONTHS" type="tns:numeric2" />
      <xsd:element name="PERIODIC" type="tns:char1" />
      <xsd:element name="DELANFREP" type="tns:char1" />
      <xsd:element name="EMERGMODE" type="tns:char1" />
      <xsd:element name="STATUS" type="tns:char1" />
      <xsd:element name="NEWFLAG" type="tns:char1" />
      <xsd:element name="AUTHCKNAM" type="tns:char12" />
      <xsd:element name="AUTHCKMAN" type="tns:clnt3" />
      <xsd:element name="SUCCNUM" type="xsd:int" />
      <xsd:element name="PREDNUM" type="xsd:int" />
      <xsd:element name="JOBLOG" type="tns:char20" />
      <xsd:element name="LASTSTRTDT" type="tns:date" />
      <xsd:element name="LASTSTRTTM" type="tns:time" />
      <xsd:element name="WPNUMBER" type="xsd:int" />
      <xsd:element name="WPPROCID" type="xsd:int" />
      <xsd:element name="EVENTID" type="tns:char32" />
      <xsd:element name="EVENTPARM" type="tns:char64" />
      <xsd:element name="BTCSYSREAX" type="tns:char32" />
      <xsd:element name="JOBCLASS" type="tns:char1" />
      <xsd:element name="PRIORITY" type="xsd:int" />
      <xsd:element name="EVENTCOUNT" type="tns:char8" />
      <xsd:element name="CHECKSTAT" type="tns:char1" />
      <xsd:element name="CALENDARID" type="tns:char2" />
      <xsd:element name="PRDBEHAV" type="tns:char1" />
      <xsd:element name="EXECSERVER" type="tns:char20" />
      <xsd:element name="EOMCORRECT" type="xsd:int" />
      <xsd:element name="CALCORRECT" type="xsd:int" />
      <xsd:element name="REAXSERVER" type="tns:char20" />
      <xsd:element name="RECLOGSYS" type="tns:char10" />
      <xsd:element name="RECOBJTYPE" type="tns:char10" />
      <xsd:element name="RECOBJKEY" type="tns:char70" />
      <xsd:element name="RECDESCRIB" type="tns:char10" />
      <xsd:element name="TGTSRVGRP" type="tns:char40" />
      <xsd:element name="PROGNAME" type="tns:char40" />
      <xsd:element name="XPGPROG" type="tns:char128" />
      <xsd:element name="EXTCMD" type="tns:char18" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:complexType name="BTCSELECT">
    - <xsd:sequence>
      <xsd:element name="JOBNAME" type="tns:char32" />
      <xsd:element name="JOBCOUNT" type="tns:char8" />
      <xsd:element name="JOBGROUP" type="tns:char12" />
      <xsd:element name="USERNAME" type="tns:char12" />
      <xsd:element name="FROM_DATE" type="tns:date" />
      <xsd:element name="FROM_TIME" type="tns:time" />
      <xsd:element name="TO_DATE" type="tns:date" />
      <xsd:element name="TO_TIME" type="tns:time" />
      <xsd:element name="NO_DATE" type="tns:char1" />
      <xsd:element name="WITH_PRED" type="tns:char1" />
      <xsd:element name="EVENTID" type="tns:char32" />
      <xsd:element name="EVENTPARM" type="tns:char64" />
      <xsd:element name="PRELIM" type="tns:char1" />
      <xsd:element name="SCHEDUL" type="tns:char1" />
      <xsd:element name="READY" type="tns:char1" />
      <xsd:element name="RUNNING" type="tns:char1" />
      <xsd:element name="FINISHED" type="tns:char1" />
      <xsd:element name="ABORTED" type="tns:char1" />
      <xsd:element name="ABAPNAME" type="tns:char40" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:complexType name="RfcException.Message">
    - <xsd:sequence>
      <xsd:element name="ID" type="xsd:string" />
      <xsd:element name="Number" type="tns:RfcException.Message.Number" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:complexType name="ZBP_JOB_SELECT_SM37B.RfcException">
    - <xsd:sequence>
      <xsd:element name="Name" type="tns:ZBP_JOB_SELECT_SM37B.RfcExceptions" />
      <xsd:element name="Text" minOccurs="0" type="xsd:string" />
      <xsd:element name="Message" minOccurs="0" type="tns:RfcException.Message" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:complexType name="TableOfTBTCJOB">
    - <xsd:sequence>
      <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:TBTCJOB" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:complexType name="TableOfTBTCJOB_BK">
    - <xsd:sequence>
      <xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="tns:TBTCJOB_BK" />
      </xsd:sequence>
      </xsd:complexType>
    - <xsd:simpleType name="ZBP_JOB_SELECT_SM37B.RfcExceptions">
    - <xsd:restriction base="xsd:string">
      <xsd:enumeration value="INVALID_DIALOG_TYPE" />
      <xsd:enumeration value="JOBNAME_MISSING" />
      <xsd:enumeration value="NO_JOBS_FOUND" />
      <xsd:enumeration value="SELECTION_CANCELED" />
      <xsd:enumeration value="USERNAME_MISSING" />
      </xsd:restriction>
      </xsd:simpleType>
      <xsd:element name="ZBP_JOB_SELECT_SM37B.Exception" type="tns:ZBP_JOB_SELECT_SM37B.RfcException" />
    - <xsd:element name="ZBP_JOB_SELECT_SM37B">
    - <xsd:complexType>
    - <xsd:sequence>
      <xsd:element name="ENDDATE" minOccurs="0" type="tns:date" />
      <xsd:element name="ENDTIME" minOccurs="0" type="tns:time" />
      <xsd:element name="JOBSELECT_DIALOG" type="tns:char1" />
      <xsd:element name="JOBSELECT_JOBLIST" minOccurs="0" type="tns:TableOfTBTCJOB" />
      <xsd:element name="JOBSELECT_JOBLIST_B" type="tns:TableOfTBTCJOB_BK" />
      <xsd:element name="JOBSEL_PARAM_IN" minOccurs="0" type="tns:BTCSELECT" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
    - <xsd:element name="ZBP_JOB_SELECT_SM37BResponse">
    - <xsd:complexType>
    - <xsd:sequence>
      <xsd:element name="JOBSELECT_JOBLIST" type="tns:TableOfTBTCJOB" />
      <xsd:element name="JOBSELECT_JOBLIST_B" type="tns:TableOfTBTCJOB_BK" />
      <xsd:element name="JOBSEL_PARAM_OUT" type="tns:BTCSELECT" />
      </xsd:sequence>
      </xsd:complexType>
      </xsd:element>
      </xsd:schema>
      </wsdl:types>
    - <wsdl:message name="ZBP_JOB_SELECT_SM37B">
      <wsdl:part name="parameters" element="tns:ZBP_JOB_SELECT_SM37B" />
      </wsdl:message>
    - <wsdl:message name="ZBP_JOB_SELECT_SM37BResponse">
      <wsdl:part name="parameters" element="tns:ZBP_JOB_SELECT_SM37BResponse" />
      </wsdl:message>
    - <wsdl:message name="exception00">
      <wsdl:part name="exception00" element="tns:ZBP_JOB_SELECT_SM37B.Exception" />
      </wsdl:message>
    - <wsdl:portType name="ZBP_JOB_SELECT_SM37B">
    - <wsdl:operation name="ZBP_JOB_SELECT_SM37B">
      <wsdl:input message="tns:ZBP_JOB_SELECT_SM37B" />
      <wsdl:output message="tns:ZBP_JOB_SELECT_SM37BResponse" />
      <wsdl:fault name="exception00" message="tns:exception00" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="ZBP_JOB_SELECT_SM37BSoapBinding" type="tns:ZBP_JOB_SELECT_SM37B">
      <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="ZBP_JOB_SELECT_SM37B">
      <soap:operation soapAction="" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
    - <wsdl:fault name="exception00">
      <soap:fault name="exception00" use="literal" />
      </wsdl:fault>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="ZBP_JOB_SELECT_SM37BService">
    - <wsdl:port name="ZBP_JOB_SELECT_SM37BSoapBinding" binding="tns:ZBP_JOB_SELECT_SM37BSoapBinding">
      <soap:address location="http://bladecx1.vshodc.lntinfotech.com:8000/sap/bc/srt/rfc/sap/ZBP_JOB_SELECT_SM37B?sap-client=100" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    The Web Service URL specified in Widget Prefernces is:
    http://bladecx1.vshodc.lntinfotech.com:8000/sap/bc/srt/rfc/sap/ZBP_JOB_SELECT_SM37B?sap-client=100&wsdl=1.1
    The only thing that i I have modified in the original widget is the name of Function Module in the main.js file. The function Module created by me is  'ZBP_JOB_SELECT_SM37B'.
    Regards,
    Rashmi

  • Iphone will not stay connected "invalid response received from the device."

    I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
    I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
    Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
    Thanks in advance for anyone who can help!

    Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
    -I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
    -I add them to the "ringtones" section under "Devices"
    -ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
    -I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Ringtone1
    Why on Earth could this be?

  • HTTP response time - From any SAP table.

    Hi,
    Can we get http response time other than from SMICM u2192 Http log?
    Reason for me to ask is we cannot see complete URL in smicm log with response time.
    date - "POST /sap/bc/webdynpro/sap/cprojects/?sap-contextid=......................................... HTTP/1.1" 200 325894 9555 h[-]
    As per sap help link complete URL after contextID is hidden for security reason.
    http://help.sap.com/saphelp_crm70/helpdata/EN/48/442541e0804bb8e10000000a42189b/frameset.htm
    u201CFor security reasons the following information is hidden (replaced with points) from the logging procedureu201D
    Question: can we access complete URL from any table level with http response time, any input is appreciated.
    Thanks,
    Venkat.

    Michael,
    First of all, thanks for the reply.
    In our environment we have cprojects implemented and have lot of webdynpro request to ECC system.
    From http log (SMICM) I can see many webdynpro requests with response time above 30 minutes; I want to automate this monitoring by writing a CCMS data supplier. We already have SAP document to write data supplier.
    Scenario: For example if they are doing a task in cprojects.
    We will be having a GET webdynpro request and then POST. By looking at GET we can know the task user is trying to do. But it is POST request which will be taking most of the response time and POST URL is show u2026(point) after context ID and as per SAP help this is done for security reason.
    HTTP log from SMICMu2026
    [DATE] - "GET /sap/bc/webdynpro/sap/cprojects?sap-client=clnt&STARTVIEW=Tasks&OBJECT_TYPE=TTO&GUID=GUIDNUMBER
    [DATE] - "GET /sap/bc/webdynpro/sap/cprojects/~ucfLOADING?sap-contextid=....................
    [DATE] - "POST /sap/bc/webdynpro/sap/cprojects/?sap-contextid=........................[response time]
    I think SAP is displaying as point in http log file, but it should definitely have complete URL is any of the table.
    So I am looking If we can find the complete POST URL with response time from table then we can write an ABAP program to send the information to CCMS.
    Thanks,
    Venkat.

Maybe you are looking for

  • HP ENVY 6 Speakers Sound Bad (REVERB)

    Hi everyone, I've bought my HP ENVY Ultrabook 6-1111TX laptop a couple of days ago. I really do love this laptop except for the speakers. (Which I'm guessing should sound better than average because of the whole Beats Audio thingy.) Ever since i turn

  • Copy and paste has stopped working in all applications.

    It looks as if the text is being copied, and it looks as if there is somwething to paste in the Edit dropdown window - but nothing appears when you do paste.   Also, the 'Undo' button appears in the edit window, as if it has pasted...

  • Pdf files will not open upon downloading

    I download a lot of pdf docs for work and want them to open automatically upon download so I can screen them.  Since upgrading to Safari 5.1, when I download files (which has gotten much more cumbersome) they do not automatically open upon download. 

  • Accessing status bar text in codedUI test

    I need to get the text from status bar. I tried statusbar.text and statusbar.name, both didn't work. So suggest any method to get the text from it?

  • Authorization to release sales invoices to accounting.

    Is it possible to give users SAP transaction VF02 without giving the authorization to release invoices to accounting? is there any specifig object? Doing a SAP trace I see no specific objects involved in the releasing. Thank you.