Three questions about dealing with and creating new catalogs

I have 3 catalog related challenges.
1) I loaded an entire batch of images into the wrong catalog...an existing one.
    Can I simply remove them from that catalog in bulk?
2) For some reason I can't get LR to create a new catalog that I name after
    a specific job. Should I use File|New Catalog or Import? Something else?
3) LR launches with the same catalog open every time. I have unchecked the
    preferences box that tells it to do that. I want it to open with NO catalog
    everytime. What setting am I missing?
Thanks for the input.
JeffRN

1) I loaded an entire batch of images into the wrong catalog...an existing one.
    Can I simply remove them from that catalog in bulk?
Yes, select all of the images you want to remove then hit the delete or backspace key. The following dialog will open and you should choose Remove - don't be tempted to choose Delete from Disk or you images will be sent to trash.
2) For some reason I can't get LR to create a new catalog that I name after
    a specific job. Should I use File|New Catalog or Import? Something else?
To name a Catalog after a specific job/project/shoot you should use File>New Catalog. A dialog will open and you can enter the name in the field labelled Save As.
3) LR launches with the same catalog open every time. I have unchecked the
    preferences box that tells it to do that. I want it to open with NO catalog
    everytime. What setting am I missing?
Launching Lightroom so that it opens with no catalog you need to choose the preference Prompt me when starting Lightroom as shown below.

Similar Messages

Three Questions about CS6 Bridge and Photoshop and CR2

1.I Upgraded CS6 to my computer. Old Version was 5.5 and Bridge was 5.1. Why the CR2 filer doesn´t all show in thumbnails and no image is shown in the right window where you can check the picture. The CR2 files are shot with Canon 5D Mark II. Also Photoshop doesn´'t show the prewies when you try to open. In 5 version these weren´t problems.
2. Why Bridge doesn´t show the pictures color profile in metatada, it says Untagged. The images are shot in Nikon D3000 camera. It shows it in Raw file.
3. Why some pictures show little unfocused in Bridge but when you go o raw, it is sharp. The sharpen little checking window in Bridge shows 200%?
and finally
4. I think that now when I have two CS versions in my computer they slows it down. Is it okay to burn the CS5.5 files in DVD and then uninstall it?

Two versions on the same computer will not have any effect. They are seperate programs and will not interfere. Best to leave as is.
In CS6 click on Help/about plugin/camera raw. You should have version 7.1 there.
What OS?

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music it no longer goes to icloud an does not show up on my iphone.

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

How can I make the popup with empty fileds and create new record?

I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
Thanks

You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
    public static void resetBindingValue(String expression, Object newValue) {
        FacesContext ctx = FacesContext.getCurrentInstance();
        Application app = ctx.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = ctx.getELContext();
        ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
        Class bindClass = valueExp.getType(elContext);
        valueExp.setValue(elContext,newValue);
    }

Forgot security questions, how do i delete old ones and create new ones

forgot security questions on, how do i delete old ones and create new ones

The following has instructions: If you forgot the answers to your Apple ID security questions

I have three questions about managing my music library

Hello,
I have three questions about managing my music library, I hope you can help me with them:
1) Is there a limit of how many entries, songs, albums, art work, can iTunes handle? I have a hunch iTunes is like a database program and am curious about its capacity. I have two 2-TB drives and am wondering what is going to happen when I fill these two drives up. Other than disk space, what are iTunes limitations?
2) Talking about these two drives. How can I use both as a source for my iTunes library. Can I have two folders selected as the source of my library? I am not sure if I have enough disk space to hold all my music, but I do also have a 1TB almost empty drive is need be.
3) OK now comes te real question. I am sure that I have duplicates in my library and I sure would love to clean my library up.Possiby if I do get to clean it up, I can save some disk space and that is always a good thing. Any good techniques, software, techniques to follow while ripping music to help keep my library organized. Please be as detailed as you can.
Thanks and I can't wait to hear from you.
Waseem

Wassimn wrote:
Hello,
I have three questions about managing my music library, I hope you can help me with them:
1) Is there a limit of how many entries, songs, albums, art work, can iTunes handle? I have a hunch iTunes is like a database program and am curious about its capacity. I have two 2-TB drives and am wondering what is going to happen when I fill these two drives up. Other than disk space, what are iTunes limitations?
As far as I know you're going to run out of disc space before you hit any limits. Each object in iTunes has a 64-bit key to access it. That said as your library grows it will get less responsive as bigger indexes take exponentially longer to process.
2) Talking about these two drives. How can I use both as a source for my iTunes library. Can I have two folders selected as the source of my library? I am not sure if I have enough disk space to hold all my music, but I do also have a 1TB almost empty drive is need be.
iTunes wants to manage everything inside one big folder. Some idiosyncrasies with the way it manages things if you have to move to a new drive means it is best if you can stick to that plan. If your library grows larger then you'll have to take manual control of where some or all of your content is stored. I use a variation of a script called ConsolidateByMoving which you could adapt for your needs.
3) OK now comes te real question. I am sure that I have duplicates in my library and I sure would love to clean my library up.Possiby if I do get to clean it up, I can save some disk space and that is always a good thing. Any good techniques, software, techniques to follow while ripping music to help keep my library organized. Please be as detailed as you can.
When it comes to deduping I've written another script for that called DeDuper, see this thread for background.
And for some general tips on getting organized in iTunes see Grouping tracks into albums.
tt2

Three questions about a single-folio publication

We are finishing our first publication with DPS.
We have a Adobe DPS Professional Edition, Annual version.
1- I have been planning to launch the App in iPad and Android for free and in three days to put the price at $9,00. Is that possible?
2 - How much time needs Apple to approve our appliction?
3- I have read that you can't publish a single folio app in Android. Why?
What is the option

On android a .apk app is limited to 50 mb. Additional Content up to 4GB can
be loaded by the app on its first start.
This need a change in workflow for the android version on the viewer side.
And it may be political, too.
—Johannes
(mobil gesendet)
Am 17.01.2012 02:32 schrieb "Bob Bringhurst - Adobe" <[email protected]>:
Re: Three questions about a single-folio publication created by Bob
Bringhurst - Adobe <http://forums.adobe.com/people/BobBringhurst-+Adobe>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4145193#4145193>

Question about the order to creating Account, Contact, Contact Role

Hi, my friends,
I have some questions about the order of creating Account, Contact, Contact Role, etc in Web Service 1.0. I could create them in the following case:
1. Insert Contact object and get contactId (now new contact exists in CRMOD)
2. Insert Account object with Contact Role child associated with contactId
My questions are:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?
Thanks
Ray

Hi Ray,
In response to your questions:
1. Do we have the following order? Insert new Account with new Contact child and Contact Role child (Contact is new and does not exist in CRMOD).No. Both the Account and Contact must already exist. The Role value is an attribute on the Account Contact relationship, this relationship must exist in order to assign a role value to it. This is consistent with the behaviour of the UI, when you press the New button on the Contact child applet, you are taken to the Contact New page where you can create a Contact record. Once you save, the relationship is created but you cannot assign a role value unless you click the Edit Roles link next to the new Contact.
2. Looks like system need accountId, contactId, etc to make the objects relationship. Is there other field having the same function?Correct, the system needs to know which Account/Contact pair is being assigned a role value. To do this the Account and Contact values must be uniquely identified using the Id values for each.
I hope this helps.
Thanks,
Sean
Edited by: Sean Duffy on Jan 25, 2010 10:11 AM

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Copying home DVD videos, editing, and creating new DVDs

Here is the situation:
I have the 17" and this is my first Mac to own. I am computer literate with most my experience on Windows and Linux.
That being said, I am trying to edit home videos; but they are already on DVDs. I got a LiteOn DVD/VCR combo recorder for my entertainment center. I have a camcorder that uses Hi-8 media and it is only able to use S-video/composite outputs (no USB or Firewire). I am using the LiteOn recorder to archive all my videos to DVDs because it has composite inputs. The LiteON has hardly any editing capability. So I want to take the "simple" DVDs I made, copy them to my HD, edit them (to cut out junk, create better menus, and give it as nice touch), and create new DVDs to distribute to my family and to get rid of old tapes.
So in short, the process I want to do on the Mac is:
1. Copy my family home DVDs
2. Edit the video.
3. Create more "creative" DVDs for my family.
I have been looking around the website and reading posts and I don't see how to do this. I did try to create an image on disk utility, but it failed for whatever reason (maybe I am missing a step). How can I accomplish the three steps above?
Please help.
Thank you, Michael

If these are true, standard video DVDs that the drive creates, there are a number of utilities that can extract and convert the videos for use in editing applications. A couple of utilities that people have reported success with are DVDxDV, Cinematize, and MPEG Streamclip (MPEG Streamclip is freeware but requires that you have Apple's QuickTime MPEG2 Playback Component), and there are no doubt others.
Once extracted, you can use iMovie to edit the clips and iDVD to burn them to a new DVD. Then you can use Disk Image or a third-party application such as Roxio's Popcorn to make additional copies.
Hope this helps.

Question about function with in parameters

Hello,
I have a question about functions with in-parameters. In the HR schema, I need to get the minimum salary of the job_id that is mentioned as an in-parameter.
this is what I am thinking but I dont know if it's correct or not or what should I do next!
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
begin
SELECT min_salary INTO min_sal
FROM jobs
where job_id = get_minimum_salary(xy);
RETURN i_job_id;
end get_minimum_salary;
thanks in advance
EDIT
Thanks for your help all.
Is it possible to add that if the i_job_id which is the in type parameter does not have a minimum salary then use the following function to register an error:
create or replace procedure insert_error (i_error_code in number,
i_error_message in varchar2)
as
begin
insert into error_table (error_user, error_date, error_code, error_message)
values (user,sysdate,i_error_code,i_error_message);
end insert_error;
This function is basically to say that an error has occured and to register that error, at the same time I need to print out the error using the dbms_out.put_line.
Any ideas of how to do that?
Thanks again
Edited by: Latvian83 on Jun 1, 2011 5:14 AM

HI
I have made little bit changes in ur code. try this
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
v_Min_sal jobs.salary%type=0;---- Variable declaration
begin
SELECT min_salary INTO v_ min_sal
FROM jobs
where job_id = i_job_id;
RETURN v_Min_sal;
end get_minimum_salary;
Regards
Srikkanth.M

Question about Communication with Oracle 7

Hi,
Generally we use Oracle Snapshots for Communication, but since Oracle 9.2.0.5 do not work with Oracle 7.1.5.2.4. we are thinking about do use Oracle Interconnect for this Link.
Now I have the following two Questions about Communication with Oracle 7:
1. Is an Adapter for Oracle 7.1.5.2.4 available?
2. From your experience, does it make sense to install Oracle Interconnect for implementation of only one read only Link with 3 Tables if an OAS for BI is available?
Thanks,
Hannes

1. The Oracle database adapter is for Oracle 8i and up. I checked the code needed in the database and doubt that will work in Oracle 7.
1. The other option Advanced Queuing also needs 8i and up.
2. For me it doesnt make sense that you want to connect to Oracle 7. Oracle 7 is unsupported and should not have to be developed against. Also the license costs for Oracle Interconnect ~17K without any discount is a bit steep for read only links to three tables. Having the OAS means you wont have to pay another additional ~17K for the apps server.

Problem in Shrink my local disk C and create new partitions on it.

I am trying to Shrink my local disk C (current boot volume) and create new partitions on it. But I am getting a Warning message that If I do so, I won't be able to boot from any volume excepet the the current boot Volume.
In case if I need to do the recovery for my computer what will happen. does it mean that I can't do the recovery from my hard disk?
This question was solved.
View Solution.

Kaj_R wrote:
I am trying to Shrink my local disk C (current boot volume) and create new partitions on it. But I am getting a Warning message that If I do so, I won't be able to boot from any volume excepet the the current boot Volume.
In case if I need to do the recovery for my computer what will happen. does it mean that I can't do the recovery from my hard disk?
Hello Kaj_R.
If you change the volumes it is quite likely that the recovery partition will not function. I suggest you create a set of Recovery Media before messing with the partitions.
This document can help you create the recovery media.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Transfer assets collectively to new class and create new assets like ABUMN

We need to change the account determination for a few Asset Classes that already have assets with postings. As a result we must create new asset classes and assign a new account determination.
Is there a program that would allow transfer assets collectively to a new asset class and create new assets automatically similar to ABUMN? T-code ABUMN allows you to transfer multiple assets but you must create the new assets first. ABUMN will transfer and create new asset but only does one asset at a time.
There are hundreds of assets with postings to be transferred from the old asset classes to the corresponding new asset classes.
Appreciate whatever input you can provide.
Tara

download the asset master data(original) and create new asstes using lsmw or any third party tool also.

Reconfigure sales BOM deletes line item and creates new line item

We are having issue with Sales BOM. Once sales BOM is reconfigure, line item is automatically deleted and creates new line item. These changes are not captured by reporting tool. Is it standard SAP behavior? if its not standard behavior, how to fix this issue?

Hi,
If i am not wrong, i assume you are using site instead of plant. If it is plant , then "yes", we can have a order with same material being line item 10 and 20 with different plants. Reg delivery, if the plants are configured to a same shipping point then you will have one delievery. if the plants are configured for a different shipping point , then delivery will be split up.
Reward if it helps,
Thanks & regards,
CLN

Three questions about dealing with and creating new catalogs

Similar Messages

Maybe you are looking for