Throwing an error when a DFF is NULL

The requirement is that if the user does not select a value for a displayed DFF in an OAF page an error is displayed i.e. the field is required. As the item type is flex it does not have a required property therefore i was looking to do this in JDeveloper. We can't make the DFF required via system administrator as the form should not have the field as required.
Which file should i add a method to in order to enable this.
Would it be a good idea to extend the VO and add the method to the row impl java file?
We have upgraded to R12.1.3 and in the past extending the VO, adding a method to the row impl java has worked. But only when the user clicks the next button first time is the error message displayed. if the user clicks the next button again without making any changes to the OAF page it allows the user to proceed. i.e. The method is only invoked once and not each time the user clicks the next button.
Any advice on the correct approach is appreciated.

yes we want to make the dff segment mandatory in oaf.
We don't want it mandatory on the form however and therefore need to do it via oaf
Thanks.

Similar Messages

CF 8 CFPDF "Merged" document throws 131 Error when opened in Acrobat

We are using CF 8 on Windows Server 2003 platform.
Any CFPDF "Merged" documents are throwing 131 Errors when opened in Acrobat
Tried re-saving the documents on local machine and still same problem. Tried opening in multiple versions of Acrobat, same problem.
Individual documents created are opening without issue. It is Only when these documents are merged that this error occurs.
We do not experience this behavior in our CF 10 environment.
We are a Big, Slow moving enterprise here so not much chance of getting our CF 10 environments promoted to meaningful production use soon.
Found virtually nothing in HelpX and nothing online of any value regarding this issue.
Has anyone else experienced the issue noted in the title of this discussion?
Has anyone a work around or solution?

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Accordion throwing an error when you click in it

Hi All,
I've got an Accordion (code at end of message) that (when you click in it) throws the following error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mx.containers::Accordion/focusInHandler()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\containers\Accordion.as:1357]
I looked into it, and here's the code that's throwing the error:
    override protected function focusInHandler(event:FocusEvent):void
        super.focusInHandler(event);
        showFocusIndicator = focusManager.showFocusIndicator;
        // When the accordion has focus, the Focus Manager
        // should not treat the Enter key as a click on
        // the default pushbutton.
        if (event.target == this)
            focusManager.defaultButtonEnabled = false;
The line that's bombing is "showFocusIndicator = focusManager.showFocusIndicator" -- the problem is that focusManager is null.
This is how I create and show the component that has the accordion when the user clicks on an "Instructions" button:
     public var instructionsDialog:InstructionsDialog;
     protected function instructionsButton_clickHandler(event:MouseEvent):void
          if(this.instructionsDialog == null)
               this.instructionsDialog = new InstructionsDialog();
          PopUpManager.addPopUp(this.instructionsDialog,this,true);
          PopUpManager.centerPopUp(this.instructionsDialog);
And here's the component:
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
           xmlns:s="library://ns.adobe.com/flex/spark"
           xmlns:mx="library://ns.adobe.com/flex/mx" width="400" height="400">
     <fx:Script>
          <![CDATA[
               import mx.events.CloseEvent;
               import mx.managers.PopUpManager;
               protected function mainTitleWindow_closeHandler(event:CloseEvent):void
                    PopUpManager.removePopUp(this);
          ]]>
     </fx:Script>
     <fx:Declarations>
          
     </fx:Declarations>
     <s:TitleWindow left="0" top="0" right="0" bottom="0" id='mainTitleWindow'
                       close="mainTitleWindow_closeHandler(event)" title="Instructions">
          <mx:Accordion id="accordion" color="0x323232" width="100%" height="100%">
               
               <s:NavigatorContent label="Header 1">
                    <mx:Text width="100%">
                         <mx:text>
                              Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce a magna non urna ultrices facilisis. Aenean venenatis volutpat enim eget vehicula. Suspendisse eu diam tortor, sed tincidunt augue. Vestibulum interdum sem eget dui suscipit rutrum. In hac habitasse platea dictumst. Fusce ullamcorper ipsum sed elit tempor eget interdum ipsum tempus. Nulla convallis eleifend mattis. Donec nec hendrerit dui. Vivamus nec urna eget lectus gravida porttitor quis ut lacus. Fusce rutrum, justo a vestibulum tempus, eros tellus vestibulum sem, laoreet consequat lectus urna vitae eros. Ut pulvinar porttitor quam, ut scelerisque arcu pharetra vel. Praesent leo felis, eleifend quis tempor vitae, venenatis at erat. Donec nec risus sed enim dapibus pretium quis vitae velit. Nulla pulvinar semper magna non pulvinar. Proin dictum tristique lacus. Morbi eget urna velit. Aliquam massa dui, dapibus pretium interdum sit amet, ultrices sed lorem. Vestibulum et eros a dolor sagittis pretium at ut mauris.
                         </mx:text>
                    </mx:Text>
               </s:NavigatorContent>
               <s:NavigatorContent label="Item 2">
                    <mx:Text width="100%">
                         <mx:text>
                              Sed ultricies elit vel dui aliquam faucibus faucibus lacus ullamcorper. Phasellus odio est, tristique quis lacinia id, accumsan at lacus. Pellentesque consectetur, libero quis dignissim interdum, mi velit semper nunc, nec auctor metus nulla non lorem. Nunc scelerisque eros nec libero elementum pellentesque. Maecenas et dolor libero, non ornare libero. Curabitur ante nunc, eleifend eget imperdiet facilisis, venenatis nec urna. Nullam nulla magna, ultricies at vestibulum non, auctor quis eros. Lorem ipsum dolor sit amet, consectetur adipiscing elit. In nunc nunc, dapibus quis posuere ut, tristique in dui. Curabitur at tincidunt turpis. Cras molestie quam nec lacus viverra fermentum. In bibendum varius augue id feugiat. Quisque id pretium turpis. Cras et velit nisi. Nunc sodales libero ut magna convallis interdum adipiscing magna vehicula. Phasellus elementum turpis vitae ipsum ultrices dictum. Aenean porttitor nibh sit amet est ullamcorper vitae rutrum dolor molestie.
                         </mx:text>
                    </mx:Text>
               </s:NavigatorContent>
               <s:NavigatorContent label="Item 3">
                    <mx:Text width="100%">
                         <mx:text>
                              Quisque cursus posuere porttitor. Mauris eros eros, sagittis et ultricies vitae, scelerisque ac neque. Integer vel diam id nisl lacinia auctor ac quis orci. Quisque consectetur elementum orci. Etiam mollis dui id urna commodo vel porta neque tincidunt. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Curabitur odio urna, tincidunt in volutpat ut, lobortis nec quam. Integer et est at ante pharetra dapibus. Mauris tempus laoreet euismod. Nunc luctus tincidunt augue, quis iaculis mauris scelerisque nec. Nulla laoreet viverra ipsum, vitae gravida arcu pharetra nec. In rutrum ligula ut massa egestas in varius tortor suscipit. Cras posuere nibh ligula.
                         </mx:text>
                    </mx:Text>
               </s:NavigatorContent>
               <s:NavigatorContent label="Item 4" >
                    <mx:Text width="100%">
                         <mx:text>
                              Duis urna libero, suscipit ut laoreet a, consequat sit amet tortor. Vestibulum accumsan purus viverra mauris fermentum elementum. Vivamus quis lacus mi, quis mollis mauris. Praesent interdum ornare nulla eget scelerisque. Etiam et nibh metus. Vivamus ante tellus, gravida accumsan congue vel, commodo vel nibh. Maecenas placerat pellentesque blandit. Nunc nec faucibus quam. Fusce facilisis risus non nisi blandit eget commodo eros vehicula. Proin pharetra, tellus vel ultrices rutrum, metus libero pulvinar felis, non vulputate orci sem vitae dui. Proin sodales, purus vitae aliquam ultrices, elit mi rhoncus tellus, at dictum magna quam non massa. Phasellus tincidunt augue ut urna scelerisque in posuere mi vulputate. Ut porttitor, ipsum non ornare laoreet, augue tortor imperdiet turpis, sit amet blandit arcu turpis eu leo. Vivamus fringilla, nulla quis porta placerat, ante augue pellentesque leo, in mattis felis ante ac dui.
                         </mx:text>
                    </mx:Text>
               </s:NavigatorContent>
               <s:NavigatorContent label="Item 5" >
                    <mx:Text width="100%">
                         <mx:text>
                              Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur eget diam ipsum, nec malesuada elit. Mauris in placerat lectus. Quisque nec nulla elit. Donec ultrices turpis ac magna accumsan commodo. Aliquam blandit libero sed massa pulvinar eu aliquam ante feugiat. Pellentesque odio velit, ullamcorper posuere tristique et, pretium at enim. Curabitur vulputate metus a eros elementum pulvinar. Curabitur augue tellus, dignissim quis sodales ut, gravida in dolor. Suspendisse consectetur, neque eget iaculis feugiat, dui turpis fermentum enim, sit amet mattis leo elit a felis.
                         </mx:text>
                    </mx:Text>
               </s:NavigatorContent>
               <s:NavigatorContent label="Questions?" >
                    <mx:Text width='100%' textAlign="left">
                         <mx:htmlText><![CDATA[<div style='text-align: left;'><a href='mailto:[email protected]'>Email <u>[email protected]</u></a></div>]]></mx:htmlText>
                    </mx:Text>
               </s:NavigatorContent>
          </mx:Accordion>
     </s:TitleWindow>
</s:Group>

Flex harUI wrote:
Popups that need focus should be in a container that implements
IFocusManagerContainer.
As I was thinking about it, I figured that must be the solution... but the problem is, I have no idea which container is the right one to use. I tried SkinnableComponent, but it wouldn't even compile, saying that I couldn't have TitleWindow as a child of SkinnableComponent since TitleWindow didn't implement mx.core.IUIComponent.
So, I tried SkinnableContainer, and now it seems to be working. I'm guessing that implements IFocusContainerManager in a satisfactory fashion for the Popup system, then, yes?
Anyway, hopefully this will be useful to somebody else if they run into this same issue!

AcroForm.api throws an error when instantiated in VB6

When I try to create a new instance of AFORMAUTLib.AFormApp in vb 6, the code throws the error "ActiveX component can't create object." I am using Adobe Acrobat v9.1. Is there anything I can do to fix this error?

We do not support development around Acrobat 9 with VB6. In fact, I believe the last version that we supported with VB6 was Acrobat 7.

Bcp doesnt throw an error when the data length exceeds size of the column

Hi,
We are using bcp in SQL 2008 R2 to import the data from flat file. When the data length exceeds the size of the column, it doesn't throw any error instead it has ignored the row.
Please suggest me how to truncate and load the data into table.
Thanks,
Pasha

Hi Pasha,
According to your description, you want to import the data from flat file to SQL Server table with truncated data in SQL Server 2008 R2. To achieve your requirement, we can use Import and Export wizard. For more details, please refer to the following steps:
Launch SSMS by clicking SQL Server Management Studio from the Microsoft SQL Server program group.
Right click on the destination database in the Object Explorer, select Tasks, then Import Data from the context menu to launch the Import Wizard.
Choose Flat File Source as Data Source, then browser to the flat file.
Choose SQL Server Native Client 10.0 as Destination, then select the destination database.
Click Edit Mappings button to change column size or other properties.
Finish the processing.
For the example about how to use Import and Export wizard, please refer to the blog below:
http://www.mssqltips.com/sqlservertutorial/203/simple-way-to-import-data-into-sql-server/
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Compiling code throws undeclared errors when trying to view form in design mode.

Let me start this off by admitting that I've committed sacrilege - I edited code inside of a windows forms InitializeComponent() function. I changed this (located in the beginning of the InitializeComponent() function where all UI elements are declared):
this->image = gcnew OpenTK::GLControl();
To this:
OpenTK::Graphics::GraphicsMode^ temp = gcnew OpenTK::Graphics::GraphicsMode(ColorFormat(16, 16, 16, 16), 16, 0, 0, ColorFormat(16, 16, 16, 16), 3 , false);
this->image = gcnew OpenTK::GLControl(temp)
The result is that the code still compiles, but it gives the following errors when I try to view the code in design mode:
The variable 'image' is either undeclared or was never assigned.
"The variable 'temp' is either undeclared or was never assigned."
The former can get eliminated by using two constructors, one with no parameters, followed by an immediate override of the image object with my actual constructor. But I can't seem to get rid of the second problem. Declaring the variable temp outside of the
function didn't help, so I'm not sure if or how I can make this work. Any suggestions on how I can make the design mode parser accept my intrusions? I understand that I've done some evil things to make this happen, but I'd like to keep it more or less like
this since the result is that I have a vsynced windows form.

Hi MHoll4,
It seems that it is not the correct forum for this issue.
Since this issue is related to the WinForms app, I suggest you post this issue to the WinForm forums here:
http://social.msdn.microsoft.com/Forums/windows/en-US/home?category=windowsforms
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Apache is throwing NLS_LANG error when connecting via HTTPS using a DAD

Our Apache server is throwing this error
[Wed May 6 11:53:52 2009] [alert] [client 69.246.251.48] [ecid: 223452213192,1] mod_plsql: Unable to issue alter session : alter session set nls_language= "AMERICAN" ""
every time we connect to the server using HTTPS (the connection is using DAD -- see below for the DAD configuration).
If we run the same connection using HTTP it works fine.
Anyone know why this would happen and how we can correct it?
DAD configuration:
<Location /plshes>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername hes
PlsqlDatabasePassword @<password here>=
PlsqlDatabaseConnectString hpprd NetServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA_WE8ISO8859P1
PlsqlAuthenticationMode PerPackageOwa
PlsqlSessionStateManagement StatelessWithFastResetPackageState
PlsqlErrorStyle ModPlsqlStyle
PlsqlAlwaysDescribeProcedure Off
</Location>

@AMN -- I'm sort of in your camp in that I don't think I should have to remove that line (which I've not been able to test yet, by the way). It's possible removing the line might bypass the issue since the statement will never get issued in the first place, but I will know there is some sort of issue between HTTP and HTTPS that is throwing this error.
To answer your questions:
1. The portal database (IASDB) returns:
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CHARACTERSET WE8ISO8859P1
2. What do you mean by "pls/hes"?
3b. Which type of OAS? Can you clarify this question? OAS 10g (which means IASDB is version 9i). We run Apache using Webcache. This OAS serves up a custom application written largely in Forms and PL/SQL. Hmmm, maybe that's not what you mean by this question , though...
3a. Explain our SSL configuration -- I'll try. I configfured this 4 to 5 years ago and haven't changed it at all other than to update the Oracle Wallet certificates every year or two. We have a single physical server that hosts our infrsastructure and mid-tier components and nothing more. As mentioned, Apache is our webserver and we run Oracle's Webcache. The twist in our configuration (and probably the source of this issue we are having is somewhere in this twist) is that we use one physical server and one Apache web server to serve up both HTTP and HTTPS using a virtual host within Apache and then we deifned multiple sites and origin servers with several redirects on various ports so we can handle SSL and non-SSL connections depending on whether they come to us externally (inTERnet) or internally (inTRAnet).
Webcache sites (hes2 is the server name):
Site Origin Server
hes2:7778 hes2:7779
www.OurWebSite.com:80 hes2:8000
hes2:80 hes2:7779
sso.OurWebSite.com:80 hes2:7777
www.OurWebSite.com:443 hes2:4444
Webcache origin servers:
hes2:7777 HTTP
hes2:7779 HTTP
hes2:8000 HTTP
www.OurWebSite.com:4444 HTTPS
Webcache listen ports:
443 HTTPS -- has Oracle wallet defined for it
7778 HTTP
80 HTTP
Navigating to http://www.OurWebSite.com will redirect to hes2:8000, which is our virtual server (configuration below). Navigating to https://www.OurWebSite.com will redirect to hes2:4444.
There is probably a little more I need to provide to answer the "SSL configuration" question, but I think that is enough for now as this is already a long response -- my apologies for that.
Virtual host configuration in httpd.conf:
<VirtualHost *:8000>
ServerName www.OurWebsiteName.com
ServerAdmin [email protected]
Port 80
DocumentRoot "/u01/app1/oracle/10gasm/Apache/Apache/htdocs"
RewriteEngine on
RewriteOptions inherit
RewriteCond %{HTTP_HOST}!^www\.OurWebSite\.com [NC]
RewriteRule ^/(.*) http://www.OurWebSite.com/$1 [L,R]
OssoIpCheck off
OssoConfigFile /u01/app1/oracle/10gasm/Apache/Apache/conf/osso/osso-www.conf
<Location /portal>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /forms>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Location /discoverer>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Location>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/docs>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/images>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
<Directory /u01/app1/oracle/10gasm/Apache/Apache/htdocs/optiform>
Order Deny,Allow
Deny from all
Allow from (list of allowed IP addresses)
</Directory>
LogLevel error
ErrorLog "|/u01/app1/oracle/10gasm/Apache/Apache/logs/www_error_log 43200"
</VirtualHost>

Updateable ViewObject Throws Error When Column Set To Null

I have an updateable ViewObject that has not changed since it was created. In JDeveloper 9.0.3 I was able to pass a node with a null value into the ViewObject, post the changes, and the underlying table was updated without incident. We are upgrading the tools we use which includes JDeveloper. We need to clear the values (set them to null) in certaincircumstances. What is the secret to it? Either I have not set a parm properly or the code was malformed at the start (I did not create the initial code).
The column to be updated is UpdatedBy.
Original code - row.setUpdatedBy(null);
Attempted change - row.setAttribute("UpdatedBy",null);
Neither worked and threw the following:
oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:java.math.BigDecimal with value:
UpdatedBy is a BigDecimal type and the database column is NUMBER(9, 0). Nulls are allowable.
All help is appreciated.
Thanks,
pdr
Additional info:
The original code works fine under 9.0.3 but not under 9.0.5.
Column can be updated using the connect PrepareStatement and passing the update SQL.
Message was edited by:
pdreaiii

I am now able to update the column using the setAttribute. Weird that it is now but not before.
Still having an issue with inserting/updating rows using XML. Here is the XML node we are pushing to the ViewObject - the UpdatedBy child node was created with a null value:
<AssessmentLockViewRow>
<WorkerId>1236</WorkerId>
<AsmtId>1593730</AsmtId>
<SynchLock>N</SynchLock>
<UpdatedBy>
</UpdatedBy>
</AssessmentLockViewRow>
This was created using the following (trimmed for space:
//start code
//create the Node for persistance
XMLHelper helper = new XMLHelper(SECOND_CHILD);
try {
helper.addNode(SECOND_CHILD, "WorkerId", workerId);
helper.addNode(SECOND_CHILD, "UpdatedBy", updatedBy); // can be null
} catch (NodeNotFoundException e) {
error(CLASS_NAME, METHOD_NAME, e);
throw new EventException(e);
Node rowToAdd = helper.getRootNode();
ApplicationModule am = _appMod;
ViewObject vo = am.findViewObject(VIEW_OBJECT);
Row r = vo.first();
// r.setAttribute("UpdatedBy",updatedBy);
vo.readRowXML((Element)rowToAdd, 0);
am.getTransaction().validate();
am.getTransaction().postChanges();
//end code
The app module was created using
_appMod = (ApplicationModule)Configuration.createRootApplicationModule(
APP_MODULE, APP_MODULE_CONFIG, envInfo);
the envInfo is the user information.
Do I have something wrong here? I think I am doing something wrong but can't spot it.
Thanks.

Working in firefox, but throwing up errors in IE related to null objects

firefox has no problems with my very simple spry data example but IE throws up the following errors, can anyone help?
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; InfoPath.2)
Timestamp: Thu, 9 Sep 2010 17:31:34 UTC
Message: 'Spry.Debug' is null or not an object
Line: 961
Char: 41
Code: 0
URI: file:///C:/Users/Gabriel/Documents/My%20Dropbox/GFA/website/dev/friedmanstudios.ca/SpryAss ets/SpryData.js
Message: 'Spry.Data.initRegionsOnLoad' is null or not an object
Line: 4855
Char: 65
Code: 0
URI: file:///C:/Users/Gabriel/Documents/My%20Dropbox/GFA/website/dev/friedmanstudios.ca/SpryAss ets/SpryData.js

in my header:
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryEffects.js" type="text/javascript"></script>
<script type="text/javascript">
var ds1 = new Spry.Data.XMLDataSet("GFAWORKS.xml", "dataroot/GFAWORKS");
var ds2 = new Spry.Data.XMLDataSet("GFAWORKS.xml", "dataroot/GFAWORKS");
</script>
within a script tag near the end
Spry.$$(".RowContainer").addEventListener("click", function(){ alert("clicked!"); }, false);
earlier on in the body:
<div spry:repeat="ds2" class="RowContainer">
    <div class="RowColumn">{Name}</div>
    <div class="RowColumn">{Type}</div>
    
    <div class="RowColumn"><a href="{Code}.html">project link</a></div>
    <div class="contentPlaceholder"> </div>
</div>

Gracefully throwing a error when the web service is down

Guys,
I have web service calls in my application. (through web service data control).
My Appliacation throws exception when the web service is down. i want to my application to throw some meaningful error on the UI.
How this can be acheived?

Hi,
you can use a custom error handler defined in the DataBindings.cpx file or use a declarative exception handler in ADF Controller
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/web_adv.htm#CIHHBEEJ
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/taskflows_complex.htm#BACJCBIC
Frank

Mail Throws IMAP Error When Accessing POP Server @ Gmail

This is my first day with my new iMac and I must say that the most frustrating experience so far has been using Mail v 4.3
I have several accounts, and never had a problem until now. In the setup, it assumes incorrectly that my Gmail account is IMAP, which is isn't... and never will be considering I don't need that redundant files on a server nonsense for my personal mail.... so after it discovers there is no IMAP connection on my Gmail and it fusses about it, I switch the setting to POP.
Then when I try to download some e-mails later, it throws the following error: "Mail can't verify the identity of pop.gmail.com" ...because when you check the certificate error, you see it is querying imap.gmail.com instead of pop.gmail.com and hence getting a mismatch on the security certificate.
So I can't download Gmail emails at all for the moment.
I took a screen shot of the error message because I don't want some tech dude telling me I am imagining things or set it wrong.
Other than giving up and agreeing with Mail that I should be using IMAP, I'm stuck.

Ernie,
I have already tried this. But I did it now, strictly following your suggestion. Here's what happens:
After the first screen of account setup, Mail offers for Incoming mail server imap.gmail.com, which I duly change to pop.gmail.com.
In the next screen I manually add the "@gmail.com" part of the address to the User Name field. Then click 'Create'.
A looooooong wait later I can click on Create twice again and it's done, supposedly.
But then, it fails to get anything from Google. The particular account shows up in Mail main window as a spinning gear forever, before giving up with no email downloaded. The account ends up showing in grey in the list of accounts, with the tilde ~ next to it.
This has happened many times, like I said.
Really frustrating.

Check database integrity throws 665 error when executing check database integrity task in SSMS.

I have read all other cases that relate to this error and cannot get this to work. Running SQL Server 2012 sp1 on Windows server 2012 R2. Disk space and permissions are fine, but I get the error below when I try and use the check database integrity task
within my maintenance plan on both system and user databases. I have researched this and fragmentation is not the issue. I'm lost at this point and would appreciate at least some steps to try. databases are not "read only" as I have read this may
contribute to the problem. All other maintenance tasks run fine.
Error message from SQL LOG
Check Database integrity on Local server connection
Databases: All system databases
Task start: 2014-01-13T11:00:04.
Task end: 2014-01-13T11:00:04.
Failed:(-1073548784) Executing the query "DBCC CHECKDB(N'master', NOINDEX)
" failed with the following error: "A database snapshot cannot be created because it failed to start.
A database snapshot cannot be created because it failed to start.
MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand the physical file 'E:\\SQLdata\\MSSQL11.MSSQLSERVER\\MSSQL\\DATA\\master.mdf:MSSQL_DBCC9'.
The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline.
The database could not be exclusively locked to perform the operation.
Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous
errors for more details.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Error Message from Log File Viewer in SSMS:
Source: Check Database Integrity Task      Executing query "USE [ReportServer] ".: 50% complete End Progress Error: 2014-01-13 11:31:54.92     Code: 0xC002F210
Source: Check Database Integrity Task Execute SQL Task     Description: Executing the query "DBCC CHECKDB(N'ReportServer') WITH NO_INFOMSGS " failed with the following error: "A database snapshot cannot be created
because it failed to start. A database snapshot cannot be created because it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to
expand the physical file 'E:\SQLdata\MSSQL11.MSSQLSERVER\MSSQL\DATA\ReportServer.mdf:MSSQL_DBCC9'. The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not
support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. The database could not be exclusively locked to perform the operation. Check statement aborted. The database could not be checked as a database
snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-01-13 11:31:54.93     Source: Check Database Integrity Task
Executing query "USE [ReportServerTempDB] ".: 50% complete End Progress Error: 2014-01-13 11:31:55.02     Code: 0xC002F210     Source: Check Database Integrity Task Execute SQL Task
Description: Executing the query "DBCC CHECKDB(N'ReportServerTempDB') WITH NO_INFOM..." failed with the following error: "A database snapshot cannot be created because it failed to start. A database snapshot cannot be created because
it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand the physical file 'E:\SQLdata\MSSQL11.MSSQLSERVER\MSSQL\DATA\ReportServerTempDB.mdf:MSSQL_DBCC9'.
The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline.".
Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-01-13 11:31:55.02     Source:
Check Database Integrity Task      Executing query "USE [AddressUpload] ".: 50% complete End Progress Error: 2014-01-13 11:31:55.13     Code: 0xC002F210     Source:
Check Database Integrity Task Execute SQL Task     Description: Executing the query "DBCC CHECKDB(N'AddressUpload') WITH NO_INFOMSGS " failed with the following error: "A database snapshot cannot be created because
it failed to start. A database snapshot cannot be created because it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand
the physical file 'E:\SQLData\MSSQL11.MSSQLSERVER\MSSQL\DATA\database1.mdf:MSSQL_DBCC9'. The database snapshot for online checks could not be created. Either th... The package execution fa... The step failed.

ReFS is NOT supported in use with SQL Server 2012. Once such item, which you've stumbled upon is the fact that alternate streams and sparse files are not implemented in ReFS and thus these issues are caused. You *could* force the checkdb to execute by using
WITH TABLOCKX but that'll require exclusive access to the database for the duration of the checkdb scan and that's not something I would advise to do.
Sean Gallardy | Blog |
Twitter

ARXAGMW.rdf throws BUILD_INVOICE_SELECT error when opening in Reports Builder 10.1.2.0.2

Has anyone run across this error? "The source size of the program unit BUILD_INVOICE_SELECT is 91159 characters. This exceeds the recommended maximum source size of 90000 characters on this platform." I'm just opening the standard report in Reports Builder...no customizations thus far. Wondering if this is related to the Report Builder version I'm on or not.

Hi
Thanks for the response. The document is good for issues with jsp reports. I am not even able to save this one as jsp till now. Not sure if there is some other way to do it.
This is what I did:
1. Create an excel template with 2 worksheets.
2. Save as xml.
3. Try to open with reports builder.
Thats when I get the error.
Not sure if my version problem or I am missing out on some step.
Thx!

E-Reader throws an error when trying to activate the ebook (DRM)

On my e-Reader (Poketbook touch lux) is adobe digital editions allready installed, so I should be able to activate my books on the reader. When I open the acsm file it tells me that I have to activate my book. So I enter my Adobe ID and Password. Then he works a few moments and shows me this error:
E_STREAM_ERROR CURL returned 6 (6)
Does anyone know what I can do to be able avtivate my books on the e-reader?
Regards

I can't see much about this error on the web:
one comment is at http://www.topreviewshop.com/nextbook_next2_tablet_e_reader_conclusion
Just a thought, ADE and some ereader devices/apps do not like passwords that include special characters.
If you have anything other than non-accented letters and numbers in your password,
log in at the Adobe website and change the password to a weaker one.
Then try again to activate.

Workers throw security error when using File class

I am creating a program that is writing/reading large files using the FileStream class. This portion works fine but when I want to use concurrency to prevent the UI from locking it fails. When I check inside Adobe Scout I can see the worker fires a secuirty error.
SecurityError: file
    at flash.filesystem::File$/getFile()
    at flash.filesystem::File$/get userDirectory()
    at Main/archiveFile()
    at Main/onMessageToArchiveWorker()

Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code or an application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL and I'll follow up internally.
Thanks,
Chris

Throwing an error when a DFF is NULL

Similar Messages

Maybe you are looking for