Thumbnails won't go into full screen and remain small in size.

Seem to be having continual problems with iPhoto 6. When I go in into edit mode or even when I try to view photos full screen, I only get small photos (a little bit larger than thumbnails, they are). In otherwords, can't get full screen. Have rebuilt the thumbnail cache, etc. to no avail. Any idea what is going on? The sliding zoom bar at the bottom has no effect.

Are you running iPhoto 6? The Advanced pane should look like this.
If it was OK earlier then try BatChmod and if that doesn't work try rebuilding the library with iPhoto Library Manager. It creates a new, separate library and leaves the original untouched. Here's how;
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: It can take some time to create the new library if you have a lot of photos. One user reported that with a library of about 5,000 images it took about 12 hours so plan ahead.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD,   Mac OS X (10.4.6)   22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

Similar Messages

  • Nikon D3  NEF thumbnails won't expand into larger screen on clicking

    Help Please. When viewing the raw 14 bit files from the new Nikon D3 in Bridge we see broad black bands down two opposite sides of the thumbnails and the thumbnail will not expand to larger screen view when clicked on; they stay at thumbnail size in the larger preview window. Jpegs created at the same time have no such problem. Funny thing is that sometimes these raw files will not have the large black border bands when Bridge starts afresh but new files imported into Bridge have the problem. Older files that had the problem often are self corrected but no amount of idle time in Bridge seems to assure the correction process to work out or catch up. Very hit and miss, mostly miss. >>>Maybe not surprisingly, if an NEF file is opened in ACR and processed and closed it then works properly in Bridge afterwards.<<< 
    A few technical notes: Bridge v2.1.1.9, ACR 4.3.1 and CS3 v10.0.1 Images are imported through Nikon Camera Control Pro 2, v2.0.0 or Nikon Transfer v1.0 or card readers; makes no difference. When opened in CS3/ACR all files are normal.
    Any thoughts on how to make these files work normally in Bridge without going into ACR first?
    Thanks for your help.
    Cheers,
    Rob d'Estrube [email protected]

    No solution et?
    Good Luck.
    My
    Si
    tes

  • Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

    If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

    Check System Preferences > Energy Saver
    Select:  Put hard disks to sleep when possible
    Then click: Restore Defaults

  • My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

    My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.  When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet)  in full screen mode just fine.  When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing.  I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse.  Does anybody have an answer or a work-around for me?

    Hi Watch this video,
    If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

  • Is this possible? View photos in full screen and navigate using cursor

    Recent convert from PC. Love the mac thus far but this is driving me crazy. What I am trying to do is to view pictures (in a folder) in full screen and be able to navigate either using the left-right cursor or some kind of buttons on the screen. Here's what I did:
    1) Intuitively, I double clicked on one of pics. It brings up Preview. So far so good. Able to view full screen but wait! There's no way to go the the next or previous pics. Ok I get it Preview is supposed to 'simply preview' a doc/pic. It is not a full fledge image viewing application.
    2) Few Googles later, I learned about quicklook. Easy enough, I pressed the spacebar and can see the pictures. Left-right cursor works! But wait! It stops when you view the last picture in the row (i.e. it doesn't go the next row). Huh?
    3) Few Googles later. I learned about using the 'tab' instead. Very nice...I can now browse pics on the next rows...BUT...how do I go back?
    4) Few Googles later. I learned about using the 'shift tab' to go back (now this is getting annoying). Fine, now that I've nailed navigation 101, how do I view the pics in full screen? Quicklook only utilize like 50% of the screen. I don't think it is possible....so back to square one.
    5) More Googles later. I learned about "command a" to select all pictures and then "enter". This will open Preview with all the pictures and presto the left-right cursor works, a left-right icon appears and voila the "full screen" icon is available.
    Can some expert/genius please tell me if I am too stupid to use a Mac or that Windows 7 is indeed a more superior os.

    Thomas thanks. I think we (mostly I) are beating on a dead horse here. I guess I had figured out the answer from the get-go but is simply ranting. Windows may be a crappy os but when it comes to picture viewing, it is more intuitive.
    Now that I've figured out that the "solution" is to select all and then open in preview. Another question came up...what if I want to start viewing and navigating from the middle of the pack? Assuming I have a 100 pics, and I "open" pic 50. Using preview on a single pic wont' let me navigate as you had mentioned. Quicklook allows tab/shift tab but not full screen. The "select all then open in preview" won't cut it since it will start from pic 1. Selecting just pic 50 to 100 then preview works but won't allow you to view pic 49 and before.

  • Flash Player crashes when going into full screen mode

    Hey guys! It's basically as the title implies. Whenever I am watching a video and attempt to go into full screen mode, flash player crashes and I get an error window reading "Adobe Flash Player 11.3 r300 has stopped working". As a matter of fact, it doesn't even happen all the time. It happens most of the time, however. It has happened even immediately after searching for and installing the newest version. What might be causing this and what can I do to resolve it? I am using Windows 7 32-bit and Firefox as my browser.
    Thanks in advance friends!

    this may be hardware related.  try unselecting  "Hardware Acceleration..."
    right click a movie or flash content and uncheck the box in the first tab in Settings.  quit out of the browser and try fullscreen again.

  • Elements 11 organizer shows correct wb in thumbnails but when increased to full screen or in slide show changes white balance to tungsten

    Elements 11 organizer shows correct white balance in thumbnails but when increased to full screen or in slide show changes white balance to tungsten.  Photos where shot in raw and in auto or flash white balance.  any suggestions out there?

    Figured it out, if the raw default setting has the wb on 3000 (or tungsten) the slide show uses adobe raw to convert so they all showed blue LOL

  • Make firefox stop going into full screen

    I upgraded to Firefox 10 on my macbook pro snow leopard and now the browser keeps going into full screen mode automatically. If I toggle it off, it just goes back to full screen in a few seconds.
    I have re-sized the screen and it still does it.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    See also:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    Try to remove the Firefox plist file (org.mozilla.firefox.plist).
    * http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

  • I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it.  help

    I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!

    Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.

  • I mistakenly told Firefox to go Full Screen and now I can't get it to undo and I can't access anything else.

    I downloaded the latest Firefox. In trying to learn some of the new features, I hit the Full Screen option. It went to full screen and now I do not have access to the functions I need. I can't do anything! I need to find out how to undo my mistake or I will not be able to use firefox at all. I can't even get to the portion where I can go to my gmail.

    Have you tried pressing the F11 key on your keyboard? It toggles Fullscreen mode.

  • How to create a Bool Option for Full Screen and Page Item in Mucow?

    Hi Guys!
    I was looking to create a bool option in Mucow widget options which toggles between Full Screen and a Normal Page Item .
    Example: Qooqee's Google Map Widget
    Need some help.
    Thanks in Advance

    Dear Pushpa,
    Transaction Code :SHD0 is working fine.
    Please accept my sincere thanks for your sharing your Knowledge.
    I am able to fulfill my
    Regarding the enhancement, I have not tried.
    Once I will complete, I will award the fulll marks to you.
    With Best Regards,
    Raghu Sharma

  • I went to the full screen and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? Like in a column on the left or right side? Thank you.

    I went to the full screen and don't like it and want to get back to what I had. Also, is there a way to set up bookmarks so that all show in a column on the left or right side?

    Just press F11 on your keyboard to exit full screen mode.

  • How do I make a window full screen and keep my connected monitor separate to utilize with other programs?

    I just got a MacBookPro and have an external monitor connected to it. I opened a window to full screen and the connected monitor went to a gray screen while the MBP monitor showed the program in full screen. How can I make them independant so this doesn't happen?

    Hello Azul37,
    go to your Applications folder and ctrl-click iDVD, then choose "Show Package Contents" from the drop-down menu. Next navigate to the Resources folder, find the theme, duplicate and rename it, then open the copy with the above procedure (choose Full Frame 1 for this - the other one is a bit tricky)
    Again navigate to the Resources folder and find a folder named "FullFrameTitle.pox". There are other folders inside - open them one by one until you find a TIFF file with a long name with loads of numbers and delete it. Now the grey bar for the title is gone.
    Next launch iDVD and choose your (modified) theme. Import a movie. You'll see the grey bar appear as button under the text. Go to the Settings tab in the Customize pane, select the button options and choose "Text Only". Voilà
    Note: I recommend you leave the grey bar for the buttons - it provides better on-screen visibility.
    If you are interested in tweaking your iDVD themes I recommend reading here:
    Dave Nagel's tutorial about custom buttons
    http://www.creativemac.com/articles/viewarticle.jsp?id=31388
    Creating custom dropzones by Dave Nagel
    http://www.corporatemedianews.com/articles/viewarticle.jsp?id=32445
    hope this helps
    mish

  • I can't open my adobe acrobat reader - just can view the miniature version on the taskbar, but it won't open to full screen size?  PLS HELP!

    i can't open my adobe acrobat reader - just can view the miniature version on the taskbar, but it won't open to full screen size?  PLS HELP!

    What is your operating system?  Reader version?

  • Permission request for going full screen and border alert removal.

    Ok so I play some applications games on facebook and currently everytime I go to full screen via the game it requires me to "allow" the program to go full screen.  Also there is always a border alert if my cursor touches it and causes an alert to pop up and tell me what url im connected too.  It pops up right in the middle of my screen and has gotten so troublesome I have scoured the internet for possible solutions.
      The picture above is the current alert when going to full screen and I want to get rid of this for good after allowing it about 10,000 times enough is enough. How do i shut this off?
    this is what i see in the middle of my screen anytime my cursor touches the outer border of my screen which as you can imagine in a high paced gaming situation can be a killer.... I want to keep this from popping up at all I understand i can hit esc to get out of full screen.  In fact i got the point the first 50,000 times i saw it. 
    PLEASE HELP ME !! i am desperate to remove these and have found nothing on the net after searching vigorously.
    Thank you in advance for any assistance in this matter.

    Check your keyboard settings. Therre are "gaming settings" for things repetitive keypresses, and shortcuts enabling and disabling.

Maybe you are looking for