Thunderbird taking 4 hours per message
I know this is a bit wierd but when using Thunderbird as my email client it can take an average of 4 hours to deliver an email. They appear to be sent OK and eventualy they are delivered but it takes about 4 hours. The same emails sent from BTYahoo or Live Mail are delivered promptly. I have checked all the setting and even re-set up the accounts according to BT's instructions but no improvement. Any ideas
i left the ipod connected for 24 hours and still the same this, i freezes on 2 of 38 slots. i was able to sync to of my other classic 160 earlier last week, but this one just freezes. i tried to sync the ipod with my mac mini but is does not recognize this ipod as a device associated with my itunes and wants to whipe it clean, however i have not seen people having sucusess with this method either. yes, i do use the cloud, i use my mini for uploading my cds and my windows 7 laptop for syncing the ipods...it is just easier to use it that way as i can easily sync my ipods while at work. Fwiw, i do not like the new itunes, i miss the list view, when you have over 200gig of music in itunes and still have 80% of my cd collection to add in (and i must use cds as itunes down loading does not support lossless files, which does sound much different to the compressed files to my ears) it teekes forever to scroll through it. i also do not like how auto eject seems to have dissapeard from the apple version of itunes, so when i add a cd there it does not eject it, i keep having to go to the screen and hit the eject...it is what it is i guess, but it is still buggy.
Similar Messages
-
Messages taking 2 hours to process .
Hi
our system is getting very slow with below warning every second
The adapter failed to transmit message going to send port "SendPort" with URL
"". It will be retransmitted after the retry interval specified for this Send Port.
Details:"System.Transactions.TransactionException: The operation is not
valid for the state of the transaction. ---> System.TimeoutException: Transaction Timeout
a single file is taking 2 hours to process .
probem got resolved by restart the host instance but i want permanent solution .
Regards,Hi Mohit,
If this happens for all the message in your BizTalk farm, then this issue is due to general health of the server but if it happens to a specific processing then this issue
is due to transaction between BizTalk and your destination system. I feel it’s more to do with second case –between BizTalk and a specific destination system.
Seems like you’re using some transactional adapter..may be WCF-SQL or SAP etc..anyway.
This issue normally occurs if the transaction handshake between BizTalk and destination has not happened on time. You can review you send port’s adapter’s time out property
(it different for adapter used). Check the status of the transaction/message at the destination systems.
Ideally, if a transaction takes longer time, it shall timeout and fail,check your timeout setting for timeout. One option on this to update machine.config file which will
change timeout setting for entire System.Transactions Namespace as mentioned in the following blog (this article not specific to WCF-SAP adapter, this discuss about
transaction timeout):http://blogs.msdn.com/b/biztalknotes/archive/2013/05/03/timeout-issue-with-wcf-sap-biztalk-adapter.aspx
If this happens for the entire message (or atleast to
most, find th
e pattern)
in your BizTalk farm, then this issue is due to general health of the server try running the messagebox viewer as you know and check the performance monitor.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Recordsets per message - only works with RECORDSET
I have previously got recordsets per message working when I use RECORDSET. I now have a scenario that uses "row" instead of "RECORDSET".
This is working for RECORDSET - it splits into a new message every 100 records........
Recordset Name RECORDSET
Recordset Structure RECORDSET,100
Recordsets per Message 100
ignoreRecordsetName true
RECORDSET.fieldNames RECORDCODE,ACCOUNTID,CO..............
RECORDSET.fieldFixedLengths 2,6,1,3,4,3,2,1,.............
RECORDSET.lastFieldsOptional yes
When I change RECORDSET to be row - it only produces 1 message, even though 11,000 records
Recordset Name row
Recordset Structure row,950
Recordsets per Message 950
ignoreRecordsetName true
row.fieldNames RECORDCODE,ACCOUNTID,CO..............
row.fieldFixedLengths 2,6,1,3,4,3,2,1,.............
row.lastFieldsOptional yes
Can anyone tell me what I am doing wrong?I can't believe there are no examples of these kinds of things because it is all about syntax most of the time in File Content Conversion and this can be so time consuming. I got it to work eventually - hopefully this will save someone a couple of hours. This worked:
Recordset Name row
Recordset Structure row,1
Recordsets per message 950
ignoreRecordsetName true -
File content conversion record set per message
Dear All,
Problem:- File is of huge size because of which file content conversion is taking longer time and is failing.
File format:-
Header
Detail
Detail
Header
Detail
Detail
Detail
Detail
Header
Detail
Detail
Trailer
Trailer has total count of all detail record,header record and there are few checks as well as wrt other fields.
We need to do all the above validation on the file and if it successful it shud process it otherwise alert shud be raised.
As a step:-
I have used record set per message for splitting up the file because of huge size this functionality is working fine but because of spitting of file i am not able to do trailer validation as XI is creating multiple records with different message ID's
Is any other approch which will help to achieve both Spliting as well as validation
chiragChirag,
simplest scenario I can think of is splitting the 2 reqs.
1. create 2 folders, one for "in process" files and other for "validated" files.
2. create 2 scenarios:
2.1. your current sender system to in process folder (whatever to File).
=> In this you just do the validation, without FCC. You could create a simple module for that or even do it at mapping runtime, as you said (mapping may be easier to handle errors), and throw a runtime exception (which will eventually trigger an alert).
=> At the end, only files that go successfully throug the validation will be located in the "In Process" folder.
2.2. do a simple file to file scenario (from "In Process" to "Validated" folder), this time executing FCC & splitting messages if necessary.
Of course, this will only work if the module/mapping is able to process the large file anyway (hopefully yes, since it will still be a flat file and not XML yet).
BR,
Henrique. -
Why is a 90 minute DVD taking 8 hours to encode?
I've got a top of the range MacBook Pro with 200GB free. It's taking 8 hours to encode a 60GB video. I'm assuming it's taking this long because of the raw video size - is there any way I can compress the video into an appropriate format before encoding the DVD? Otherwise, it's going to take ages...
Thanks!If a 90 minute video takes up 60GB it must be in High Definition, as standard DV streams only take up 13GB per hour.
In that case your CPU has to do quadruple the work, and 8 hours may be about right.
Best thing to do is leave it to do it overnight! -
Recordset per message in Sender File Adapter
Hi Friends
I have configured a sender file adapter to pick up *.txt files from a specific path, Since the file is having thousands of records it is failing to process the file at PI level . In order to avoid the problem I have kept Recordset Set Per Message as 10 , but still PI is processing all the records into a single message. Please help me in troubleshooting it.
Regards
Suman.Hi Suman,
Go thru these threads for troubleshooting...
Massive file
Processing huge file loads through XI
Processing of huge no of Inbound xml files
Bottleneck in Large file processing
How to process large data files in XI ? 100 MB files ?
Regds,
Pinangshuk. -
Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered. -
Why is the upgrade to iOS 7.0.4 (1.31 GB) taking ELEVEN HOURS?
Why is the upgrade to iOS 7.0.4 (1.31 GB) taking ELEVEN HOURS? After 2 full hours I have downloaded 240 MB!
I realize my Internet speed of 2.5 Mbit/sec is not blistering, but it is the fastest available to me at my rural location. It easily manages 8 to 10 GBs of material from other sites.
There are no other users on the system and no other downloads taking place. I am using a wired connection (not WiFi).
Any help would be appreciated.
Paul Good ([email protected])I am using iTunes and as I pointed out in my query, I am using the fastest connection available to me.
From other sites a file of 1.31 GB would take me less than 40 minutes! -
Recordsets per Message not working
I found that Recordsets per Message will split the source message into multiple messages and process them separately. This will save my alot of time and is exactly what I need - but it does not work.
I have in my sender file adapter the following parameters in File Content conversion:
Document Name = MT_SND_ZADIG
Document Namespace = urn://federalmogul.com/ADP/FINFRADP001/00
Recordset Name = RECORDSET
Recordset Structure = RECORDSET,*
Recordset Sequence = Ascending
Recordsets per Message = 10
Key Field Type = String (case-sensitive)
RECORDSET.fieldNames RECORDCODE,ACCOUNTID,CONST_E,CONST_Z2M,MONTHYEAR,JOURNALCODE,FOLIOCODE,RECORDTYPE,DAY,GLACCOUNT,CODINGBLOCK,DEBITAMOUNT,CREDITAMOUNT,TEXT,FILLER1,FILLER2,ACCREF1,ACCREF3,EMPLOYEENO,REPORTTYPE,ZADIGCODE,ACC_TYPE,RESERVED,CENTURY
RECORDSET.fieldFixedLengths 2,6,1,3,4,3,2,1,2,12,18,13,13,20,8,8,12,12,6,4,6,1,1,2
RECORDSET.lastFieldsOptional yes
When I feed in a file with 77 records I would expect it to split it into 7 * 10 recordset and then 1 * 7 - why is it not doing this?Hi Lynn,
And... what is the result you are getting?
Try to change Recordset Structure with something different that Recorset name.
Something like:
Recordset Name = RECORDSET
Recordset Structure = row,*
row.fieldNames RECORDCODE,ACCOUNTID,CONST_E,CONST_Z2M,MONTHYEAR,JOURNALCODE,FOLIOCODE,RECORDTYPE,DAY,GLACCOUNT,CODINGBLOCK,DEBITAMOUNT,CREDITAMOUNT,TEXT,FILLER1,FILLER2,ACCREF1,ACCREF3,EMPLOYEENO,REPORTTYPE,ZADIGCODE,ACC_TYPE,RESERVED,CENTURY
row.fieldFixedLengths 2,6,1,3,4,3,2,1,2,12,18,13,13,20,8,8,12,12,6,4,6,1,1,2
row.lastFieldsOptional yes
Follow the example is described in:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
Carlos -
iMac 7,1. SnowLeopard. 2 printers that printed nothing, or more than ±1/4 from page top.Reinstalled OS. Time Machine BU now allows only latest (faulty) files. ±4series shown, each taking +8 hours to complete. How to reinstall from ‘DEVICES’in ‘iMac’?
You need to get rid of MacKeeper (Zeobit). Do not use their uninstaller, follow the instructions here ...
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
When that is done there does not appear to be a lot wrong if you correct the red ink entries.
The 4Gb is sufficient for Yosemite though 6 or 8 Gb would be better. You may find the download slow so be prepared. -
When I switch from ios 6 to ios 7 my iphone 4s asking to I tunes to update an taking 10 hours and than give me error 3194 what can I do?
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Sender File Adapter cannot send single record per message ?
Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name MT_APINVOICE
Document Namespace urn:file:jdbc:apivinvoice
Document Offset 8
Recordset Name INPUT
Recordset Namespace
Recordset Structure RECORD,*
Recordset Sequence Ascending
Recordset per Message 1
Key Field Name
Key field Type String
RECORD.fieldFixedLengths 10,5,10,10
RECORD.endSeparator 'nl'
RECORD.fieldNames F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar -
File SENDER - "Recordsets per message" being ignored..
Hi
I have a file to file scenario
Sender file:
A1,A2,A3
B1,B2,B3
I want to split the SENDER/SOURCE file in the adapter (NO BPM) so that I am creating n number of RECEIVER files - ONE for each line.
I am trying to use content conversions and setting "Recordsets per message" to 1 but it is completely ignoring this. and ONLY creating 1 file.
I am NOT using any mapping and we are running PI 7.0
Please help
CheersHi
As per my knwoledge you can split files at mapping level in integration engine but at adapter engine you are trying that is FCC which will just convert the data into XML.In FCC it will never split files, you have to do it at mapping level.
Kindly check this link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/600b455f-01cd-2b10-0cab-a50e47a8f800?quicklink=index&overridelayout=true
this is a step by process for your query.
Regards,
Nutan -
Hi
Im doing a file to file scenario with content conversion. I have 10000 records in the file and i need to split the file using Recordsets per message option. I gave the value as 1000. In SXMB_MONI im getting 10 messages with proper payload. but in the target directory i can see 10 different files with only one (first) record in it.
Im using this configuration
Recordset Name = (left this empty)
Recordset Structure = RECORDSET,1
specified parameter ignoreRecordsetName to true
Did i miss anythingMy source and target structure are same
<Record> -- 0 to unbunded
<Row> -- 0 ro unbounded
<Type/>
<Org/>
<Datel/>
</Row>
<Row>
<Type/>
<Org/>
<Datel/>
</Row>
10000 nodes
</Record>
Im using the following in the CC
Recordset Name:Record
Recordset structure:Row,1000
Recordset per message:1
This is working fine. I mean ini SXMB moni im getting correct structure as expected. But the all the files in the target directory have only first 1000 records.. what i see in moni is different from what the files have -
"Recordsets per Message" for jdbc adapter
Hi all,
is "Recordsets per Message" kind of option is available for JDBC adapter.
Any help will be appriciated
Thanks
-KulwantHi Kulwant,
its not available.
You can a stored procedure whick picks only certain number of records per each call.
Regards
Inder
Maybe you are looking for
-
Reinstall Photoshop Elements 6 after Hard Disk upgrade on MacBook
Hi I am trying to reinstall Photoshop elements after upgrading HD on macbook 2.1 GHz Intel Core 2 Duo. OS 10.5.8, 2.5 Gb Ram using SuperDuper 2.1. Tried running the transferred copy of P.E.6 --> hangs while trying to initialize menus After searching
-
Problem with special characters when calling web services via ISG
Hi all, I have a problem when trying to send or retrieve strings containing some special characters via Integrated SOA Gateway. For example, when I call a PL/SQL function via ISG that returns a string containing curling single and double quote charac
-
HT2486 How do I print out address labels?
How do I print out address labels using the address book?
-
Printing Solutions for Guest Wireless
So this is something that has been bouncing around the forums for a year or two now. I have failed to come up with a "best-of-breed" approach that meets the strict security requirments of a government department. The scenario is this - the wireless
-
Attach WAP4410N as WGB to Cisco 5760 WLC with LWAP 3702
I have 5760 WLC with 3702 wireless infrastructure. Can i connect a WAP4410N AP as WGB to be attached to my current wifi network so i can provide connectivity to some wired devices? Any tips on doing so? And any limitation can be imposed for using thi