Recordset per message in Sender File Adapter

Hi Friends
I have configured a sender file adapter to pick up *.txt files from a specific path, Since the file is having thousands of records it is failing to process the file at PI level . In order to avoid the problem I have kept Recordset Set Per Message as 10 , but still PI is processing all the records into a single message. Please help me in troubleshooting it.
Regards
Suman.

Hi Suman,
Go thru these threads for troubleshooting...
Massive file
Processing huge file loads through XI
Processing of huge no of Inbound xml files
Bottleneck in Large file processing
How to process large data files in XI ? 100 MB files ?
Regds,
Pinangshuk.

Similar Messages

Sender File Adapter Not Picking Any File

Dear Expert,
I am newbie in PI. Just tried to create File Content Conversion Scenario. Details as follow :
1. Source Directory ..\file\log\test_q.txt
2. Target Directory ..\file\log\xml\test_q.xml
Transport Protocol : NFS
Message Protocol : File Content Conversion
Adapter Engine : Integration Engine
I have completed all the design and configuration in IR and ID. However, when I produce the log file in the directory, nothing happen.
Hacing checked in the RWB as well, I could not find any clue. simply nothing happen.
Would you please advise me on how to trigger the interface? As per my understanding, sender file adapter will be activated directly once the file is created.
Thank you very much in advance.
Best Regards,
Y

Hi Yonisiwa,
Things you should check here are:
1) If the sender file adapter is active or not.
2) If the source directory is correctly spelt or not. (Check if you are using the correct slash \ or /)
3) The file name/mask is correct or not.
4) The polling interval is too long.
Alternatively, you can check the message monitoring in RWB at the adapter level and go into the audit log if the message.
There you can see the reason for the file not being picked up.
Also check the Communication Channel status in the Component Monitoring link in RWB.
Regards,
Ravi Kanth Talagana

Sender File Adapter cannot send single record per message ?

Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name               MT_APINVOICE
Document Namespace          urn:file:jdbc:apivinvoice
Document Offset               8
Recordset Name               INPUT
Recordset Namespace
Recordset Structure                          RECORD,*
Recordset Sequence                          Ascending
Recordset per Message          1
Key Field Name
Key field Type               String
RECORD.fieldFixedLengths     10,5,10,10
RECORD.endSeparator     'nl'
RECORD.fieldNames          F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand

>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar

File SENDER - "Recordsets per message" being ignored..

Hi
I have a file to file scenario
Sender file:
A1,A2,A3
B1,B2,B3
I want to split the SENDER/SOURCE file in the adapter (NO BPM) so that I am creating n number of RECEIVER files - ONE for each line.
I am trying to use content conversions and setting "Recordsets per message" to 1 but it is completely ignoring this. and ONLY creating 1 file.
I am NOT using any mapping and we are running PI 7.0
Please help
Cheers

Hi
As per my knwoledge you can split files at mapping level in integration engine but at adapter engine you are trying that is FCC which will just convert the data into XML.In FCC it will never split files, you have to do it at mapping level.
Kindly check this link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/600b455f-01cd-2b10-0cab-a50e47a8f800?quicklink=index&overridelayout=true
this is a step by process for your query.
Regards,
Nutan

Recordsets per Message in File adapter

Hello All,
I am using Recordsets per Message option in Sender file adapter. And my source file contains more than the specified in Recordsets per Message.
Can you please tell me why it is not working
Regards,
Moorthy

Hi,
Please try to make small addition in your Sender FCC.
Recordset Structure: Row,5000
Recordset per Message: 1
It will divide your file into 5000 records and generate separate messages.
Hope this helps to you.
Regards,
P.Rajesh

Sender File Adapter - No error, but not generating any message

I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.

I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames     RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue     'B'
Buildings.fieldSeparator     ','
Buildings.endSeparator     'nl'
Buildings.keyFieldInStructure     ignore
Additions.fieldNames     RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue     'A'
Additions.fieldSeparator     ','
Additions.endSeparator     'nl'
Additions.keyFieldInStructure     ignore
Floors.fieldNames     RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue     'F'
Floors.fieldSeparator     ','
Floors.endSeparator     'nl'
Floors.keyFieldInStrucutre     ignore
Rooms.fieldNames     RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue     'R'
Rooms.fieldSeparator     ','
Rooms.endSeparator     'nl'
Rooms.keyFieldInStructure     ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
   <Buildings>
      <PLTXT/>
      <STORT/>
      <STREET/>
      <POST_CODE1/>
      <CITY1/>
      <REGION/>
      <PARNR/>
      <X_COORD/>
      <Y_COORD/>
      <ASSIGN_SQ_FT/>
      <BLDG_NUM/>
      <CAMPUS/>
      <GR_SQ_FT/>
      <NET_SQ_FT/>
   </Buildings>
   <Additions>
      <ASSIGN_SQ_FT/>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <BLDG_USE/>
      <BLDG_NUMBER/>
   </Additions>
   <Floors>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <FLOOR/>
      <ASSIGNABLE_SQUARE_FOOT/>
      <BLDG_NUMBER/>
   </Floors>
   <Rooms>
      <SHTXT/>
      <MSGRP/>
      <ADDITION/>
      <ASSIGNED_DEPT/>
      <BLDG_ABBV/>
      <FLOOR/>
      <CAMPUS/>
      <AREA/>
      <RCD_CODE/>
      <DEPT_CODE/>
      <BUILDING_NUMBER/>
      <ROOM_COMMON_KEY/>
   </Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda

FCC Sender file adapter : Message Spitting 1:2

Hi expert
i am execuing a file to file scenario, with message splitting 1:n
1 source MT   and 2 Target MT.
My source MT structure becomes as
Message
....Message1
.......SourceMT
................row
....................Field1
....................Field2
Now how to configure this structure at Sender file adapter
File Content Converson.
as after adding to MT at target side in message mapping...
2 extra hedder are added at source MT..
Regards
ajayp

> Message
> ....Message1
> .......SourceMT
> ................row
> ....................Field1
> ....................Field2
>
> Now how to configure this structure at Sender file adapter
> File Content Converson.
>
> as after adding to MT at target side in message mapping...
>
> 2 extra hedder are added at source MT..
Ignore 2 extra header and do your FCC as you do in normal scanario.

Sender File Adapter: No Messages

Hi,
I have configured a sender file adapter to read a flat file using file format conversion, in the file poler mode using NFS. I could confirm that the File is being read, and the adapter status from the Adapter framework (is:port/AdapterFramework) indicates the adapter is working fine (Green light, and last message processed at XXX........).
However, I did not find any messages from SXMB_MONI.
Further, I got inot the RWB, and found the following Audit log:
It indicates an error "Transmitting the message to endpoint http://kansbwul01:50000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 404.."
What is the problem, and how can I resolve it?
Thanks
Feroz
Success     Channel CDWFileReader: Entire file content converted to XML format
Success     Send text file "/tmp/XIDemo/3315-TL-20041126-0000IN.txt", size 164533, character encoding ISO8859-1 with QoS EO
Success     Application attempting to send an XI message asynchronously using connection AFW.
Success     Trying to put the message into the send queue.
Success     Message successfully put into the queue.
Success     The application sent the message asynchronously using connection AFW. Returning to application.
Success     Confirmation mode test found. File will be resent next time
Success     The message was successfully retrieved from the send queue.
Success     The message status set to DLNG.
Error     Transmitting the message to endpoint http://kansbwul01:50000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 404..
Success     The asynchronous message was successfully scheduled to be delivered at Sun Jan 09 19:13:21 CST 2005.
Success     The message status set to WAIT.

Hi,
Further to my earlier post, the following is the message log from the message monitor. Any clues whats going wrong. Can I configure a File Sender->File Receiver scenario?
Where and how are the port settings and user credentials configured for the AFW.
-Feroz
Message ID f49f6d21-632c-11d9-805a-0003ba54d619
RefToMsg ID
Conversation ID
Sequence Number 0
Message Type Asynchronously Sent Message (SEND)
From Party
From Service   Name: LB1_CDWFilePoler
To Party
To Service   Name: LB1_CDWFileWriter
Action   Namespace: http://erc.ge.com/cdw/poc Name: ReadFile
Connection Name   AFW
Status   Not Delivered
Profile   XI
Transport   HTTP
Delivery Semantics   Exactly Once
Times Failed   4
Number of Retries   3
Sent / Received 01/10/2005 12:42:33
Transmitted / Delivered 01/10/2005 12:57:33
Next Delivery 01/10/2005 12:57:33
Persist Until 02/09/2005 12:42:33
Valid Until
Retry Interval   5 Minutes
Address   http://kansbwul01:50000/sap/xi/engine/entry?action=execute
Credential   SAPPasswordCredential(XIAFUSER):password=********:sapclient=100:saplang=
Transport Headers   SOAPAction="http://sap.com/xi/XI/Message/30" Content-Type=Multipart/Related; boundary=SAP_63fa9d21-6337-11d9-8f3c-0003ba54d619_END; type="text/xml"; start="" HTTP=POST
Node ID   1485750

Duplicate message handling in the sender file adapter

Hi,
I enabled duplicate file handling check in the sender file adapter so that whenever there is a duplicate file it should send me an alert also it should disable the channel so that i do not get that duplicate file alert message again and again.
My question is will it activate the channel again as soon as a new file arrives or do i need to manually do that.
Michal's PI tips: Duplicate handling in file adapter - 7.31

Hi Hema,
You will have to activate the channel manually. The idea behind the 'disable' functionality is to avoid further file processing through that channel which can only start once the channel is activated again manually.
Regards,
Abhishek

"Recordsets per Message" for jdbc adapter

Hi all,
is "Recordsets per Message" kind of option is available for JDBC adapter.
Any help will be appriciated
Thanks
-Kulwant

Hi Kulwant,
its not available.
You can a stored procedure whick picks only certain number of records per each call.
Regards
Inder

Problem in Sender File Adapter using FCC with Variable structure

Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator           ,
HEADER.endSeparator           u2018nlu2019
HEADER.fieldNames               Key,x,y,zu2026
HEADER.keyFieldValue          1
HEADER.keyFieldInStructure      ignore
HEADER.fieldContentFormatting     trim
HEADER.additionalLastFields     ignore
HEADER.missingLastFields     ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333,   Cash Award ,20070801 ,20070831 ,df ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,sf ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
BTRL ,   5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya Verma

Hi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222,   r Cash Award ,20070701 ,20070703 ,TPV ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,TPV ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
EMPL ,0255555,   Cash Award ,20080301 ,20080320 ,TPV ,                          00000000027870 ,2007                                    , , , , , ,20080414 18:08:25,
EMPL ,0266666,   Cash Award ,20071001 ,20071020 ,TPV ,                          00000000020681 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0877777,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000036000 ,2007                                    , , , , , ,20080414 18:07:05,
EMPL ,0888888,   Leaver Cash Award ,20071201 ,20071231 ,TPV ,                          00000000157200 ,2007                                    , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV ,                          00000000153530 ,2007                                    , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV ,                          00000000012234 ,2007                                    , , , , , ,20080414 18:08:34,
BTRL ,   5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.

Required Changes in FCC Paramenters for Sender File Adapter.

Hi
I am Doing File-File Scenario.I am using FCC in the Sender File Adapter. I have defined the structure as below.
My Source Structure
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source xmlns:ns0="http://city.net/filecopy">
   <Message>
      <Id>123</Id>
      <Head>
         <Id>123</Id>
         <Filename>test.xml</Filename>
      </Head>
      <Body>Helloworld</Body>
   </Message>
</ns0:MT_Source_FILE>
So for the above structure, I have defined the FCC Parameters as
Document Name: MT_Source (Message Type)
Document Namespace:http://city.net/filecopy(Namespace)
Recordset Name: Message (root node)
Recordset Structure: Message,1,Head,1
Recordset Sequence: Ascending
Recordsets per message:1
Keyfield Type: string
In the Table Rows I have defined
Message.fieldFixedLengths: 3,10
Message.fieldNames: Id, Body
Message.fieldSeparator: ,
Message.endSeparator: 'nl'
Head.fieldFixedLengths: 3,8
Head.fieldSeparator: ,
Head.endSeparator: 'nl'
Head.fieldNames: Id, Filename.
My Input Text file
123,Helloworld
123,text.xml
I am Getting Output as
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/filecopy">
- <Message>
- <Message>
<Id>123</Id>
<Body>HelloWorld</Body>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I should get Body field after Head Structure as in the Source Structure, So Please what changes do I need to do in the Parameters Specified above to get the desired Output.
So How should I define the FCC Paramenters For Sender File Adapter ?
Any Help Would be Appreciated.
Regards,
Varun

Hi Everyone,
I could Succeed to some extent.
I have defined the parameters as follows
Recordset Structure: Message,*,Head,1
Key Field Name: KZ
Key Field Type: integer
In the table, I defined the Parameters as
Message.fieldFixedLengths:1,3
Message.fieldNames:KZ,Id
Message.keyFieldValue:1
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
Head.fieldFixedLengths:1,3,8
Head.fieldNames:KZ,Id,filename
Head.keyFieldValue:2
Head.keyFieldInStructure:ignore
Head.fieldSeparator:,
Head.endSeparator:'nl'
Message.fieldFixedLengths:1,11
Message.fieldNames:KZ,Body
Message.keyFieldValue:3
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
My source text file
1,123
2,123,test.xml
3,Hello World
my output is
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/FileCopy">
- <Message>
- <Message>
<Id>123</Id>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I got the output almost correct except I am not getting the value in the Body
Any help would be appreciated.
Please correct me If I am wrong.
Regards,
Varun
Edited by: Varun on Sep 2, 2008 12:06 PM
Edited by: Varun on Sep 2, 2008 12:15 PM

Recordsets per Message not working

I found that Recordsets per Message will split the source message into multiple messages and process them separately. This will save my alot of time and is exactly what I need - but it does not work.
I have in my sender file adapter the following parameters in File Content conversion:
Document Name = MT_SND_ZADIG
Document Namespace = urn://federalmogul.com/ADP/FINFRADP001/00
Recordset Name = RECORDSET
Recordset Structure = RECORDSET,*
Recordset Sequence = Ascending
Recordsets per Message = 10
Key Field Type = String (case-sensitive)
RECORDSET.fieldNames RECORDCODE,ACCOUNTID,CONST_E,CONST_Z2M,MONTHYEAR,JOURNALCODE,FOLIOCODE,RECORDTYPE,DAY,GLACCOUNT,CODINGBLOCK,DEBITAMOUNT,CREDITAMOUNT,TEXT,FILLER1,FILLER2,ACCREF1,ACCREF3,EMPLOYEENO,REPORTTYPE,ZADIGCODE,ACC_TYPE,RESERVED,CENTURY
RECORDSET.fieldFixedLengths 2,6,1,3,4,3,2,1,2,12,18,13,13,20,8,8,12,12,6,4,6,1,1,2
RECORDSET.lastFieldsOptional yes
When I feed in a file with 77 records I would expect it to split it into 7 * 10 recordset and then 1 * 7 - why is it not doing this?

Hi Lynn,
And... what is the result you are getting?
Try to change Recordset Structure with something different that Recorset name.
Something like:
Recordset Name = RECORDSET
Recordset Structure = row,*
row.fieldNames RECORDCODE,ACCOUNTID,CONST_E,CONST_Z2M,MONTHYEAR,JOURNALCODE,FOLIOCODE,RECORDTYPE,DAY,GLACCOUNT,CODINGBLOCK,DEBITAMOUNT,CREDITAMOUNT,TEXT,FILLER1,FILLER2,ACCREF1,ACCREF3,EMPLOYEENO,REPORTTYPE,ZADIGCODE,ACC_TYPE,RESERVED,CENTURY
row.fieldFixedLengths 2,6,1,3,4,3,2,1,2,12,18,13,13,20,8,8,12,12,6,4,6,1,1,2
row.lastFieldsOptional yes
Follow the example is described in:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
Carlos

Sender File Adapter - FCC - No incoming field separator - How to do FCC?

Hi,
I have a sender File adapter and I need to do the File Content Conversion but there apparently no incoming field separator and the file ocntains just running text - no data records but just information.
For example the incoming file is something like:
                                The Hongkong and Shanghai Banking Corporation Limited                      27JAN2009       PAGE 1
                                Incorporated in Hong Kong with limited liability
ABC IAL LIMITED                                                               ABU DHABI, UAE
ABC MIDDLE EAST                                                               Account No.     001-8888888
ABU DHABI                                                                       Payment Set     AAA
BBB MAIL BOX NO.99                                                             Contact Person ABC LIMITED
                                               7777777777                      Telephone
                                                 AUTOPAY LIST - PROCESSED
                                                 (AUTOPAY-OUT SALARY)
Payment Date           27JAN2009
First Party Narrative .                             66666666
Second Party Narrative .
The Message type that I am mapping to contains:
MT_XXXX
     WA
          Item
          Item2
          Item3
This is so that the information can be mapped to different field areas and send across to the Receiver Mail Adapter. In the mail i receive, i get the running text. I tried giving the field separator as '0x09' but it is not working.
I have also tried WA..fieldContentFormatting to nothing but again no luck.
I have tried with Recordset Sequence with Ascending and variable and have also tried Recordsets per Message with * and blank - but it did not help.
Please advice.
Regards,
Archana

Hi,
I assumed that it was tab but when I made the change in FCC, it did not work.
I would still like to have a output where it looks like below if more than 2 types of information in 1 line as below:
ABC IAL LIMITED                     ABU DHABI, UAE
ABC MIDDLE EAST                  Account No. 001-9999999999999
and not something like:
ABC IAL LIMITED ABU DHABI, UAE
ABC MIDDLE EAST Account No. 001-999999999999
I am not sure what to do here.
Help please.
Regards,
Archana

FCC is not able to pick in sender file adapter

Hi Experts,
     I have configured sender contentent conversion.
My structure is like :
H - H1,H2,H3
D - D1,D2,D3
P - P1,P2,P3
I configured as below:
Document name:MT
Document name:namespace
Recordset name:Recordset
Recordset structure:H,1,D,,P,
Recordset sequence:ascending
Recordsets per message:*
Keyfieldname:KF
Keyfieldtype:string(case-sensitive)
H.fieldNames - H1,KF,H3
H.fieldSeparator -   ;
H.keyFieldValue -   H
H.endSeparator -   'nl'
H.missingLastfields - ignore
H.additionalLastFields - ignore
I have provided the same for D and P.
When i tried to pick the file my file is not picking and in communication channel log i am getting the following error
Success Channel : Entire file content converted to XML format
Warning Channel : Empty document found. Proceed without sending message
Success Confirmation mode test found. File will be resent next time .
.Could any one please help me what might be the problem exactly.
Thanks in advance
Kalam.

>>When i tried to pick the file my file is not picking and in communication channel log i am getting the following error
See, any file permission (777) is not set to execute .
If you have fcc configuraton errors, You will see in the communication channel.
Set File in Delete Mode (not in Test) in CC. Just to make sure the file is picked up or not.
Stop and activate the file adapter cc and see the behaviour

Recordset per message in Sender File Adapter

Similar Messages

Maybe you are looking for