Tie 2 offices together

I assume the uc320w cannot do this.
However what solution can do this?
Customer has 2 locations with 4 employees each
Customer wants phones to ring in both locations when someone calls the main number in either location
Customer wants to easily transfer calls between locations (essentially the same phone system)

You can join tracks when importing from the CD. Insert your CD highlight the songs you want to join and choose "Join CD Tracks" from the Advanced menu and import: Adding songs from CDs to your library

Similar Messages

Is there a way to tie to iPads together so that when you turn a page with a tap on one, both iPads turn a page. I am using the ipad to replace piano sheet music. The challenge is that ordinary sheet music is on both a left and right page.

We are trying to use an ipad to replace ordinary paper sheet music on a piano. When truning ordinary paper pages, it is sometimes hard to grasp one page, turn it quickly and get it to stay turned. The idea with using an ipad is that a tap turns the page, it stays turned. However,,,,,ordinary sheet music is on both left and right pages. With one turn you get 2 new pages. The ipad, being smaller results in only one page and therefore twice as many page turn taps; more taps equals less hands on the piano. If we could tie 2 ipads together and get them both to turn the page simultaneously it would be nice. We are trying to get used to using the ipad. We are using ForScore app to get sheet music into the ipad; we could load one with odd pages and one with even pages. Maybe this is getting too complicated.
Anyway to tie 2 units together
John

No way to control one device from the other. But, according to ForScore, you should be able to display two sheets side by side in landscape mode (2-up view)? Not sure if that helps as it must make the actual print smaller to do so.
http://www.forscoreapp.com/about/#interface

Tie two songs together

I'd like to be able to tie two songs together so they always play back to back, yet in a complete shuffle mode. For instance Van Halen's Eruption / You Really Got Me Down. They appear as separate songs on the CD, so they play randomly on the shuffle. Is there a way to tie pairs of songs together?
Thanks

You can join tracks when importing from the CD. Insert your CD highlight the songs you want to join and choose "Join CD Tracks" from the Advanced menu and import: Adding songs from CDs to your library

Question on "tying" two queries together

I get an error when I run the following code (shown below).
Why can't I "tie" these 2 queries together like this?
Both run fine by themselves and give me good data, I just need to tie them together.
This is for a beginning sql class, so I all I really want is an explanation as to why this is not allowed.
I'm not finding the answer in the book I have.
Any insight for a newb appreciated!
SQL> SELECT order#, isbn, title, SUM(quantity) AS SubTotal
2        FROM orderitems RIGHT OUTER JOIN books USING (isbn)
3        GROUP BY order#, isbn, title
4        ORDER BY order#
5 WHERE (isbn, title) IN
6                     (SELECT isbn, title
7                       FROM books
8                       WHERE retail - cost >
9                                        (SELECT AVG(SUM(retail - cost))
10                                         FROM books
11                                        GROUP BY isbn));
WHERE (isbn, title) IN
ERROR at line 5:
ORA-00933: SQL command not properly ended

Hi,
When the following clauses are used, they always have to be in this order:
WHERE
GROUP BY
ORDER BY
You can skip any (or all) of these, but when you use them, they have to come in that order.
Move the WHERE-clause (the whole thing, up to, but not including, the semicolon) before the GROUP BY clause.

Using Sections To Tie Two Rows Together

I use the section capability to join two rows together. I have a button that will duplicate the section. Which on the screen shows perfectly. However, when you save the file, and open it back up it does not maintain those sections. It combines them into one. look at this example:
TABLE 1
ROW 1: element1, element2 -- Row 1&2 are group as a section
ROW 2: element1, element2
User press the add button:
Table 1
ROW 1: element1, element2 -- So when the user press the add button it duplicates the section to add two more rows in order
ROW2: element 1, element2
ROW3: element 1, element2
ROW4: element 1, element2
The user now saves the form and exits...
The user lanuches reader and opens the form. they see the follow result...
ROW1: element1, element2
ROW3: element1, element2
ROW2: element1, element2
ROW4: element1, element2
I need the section to stay together... Any suggestions of what can be done?
Regards

Uncheck the checkbox for the "Repeat Row for each Data Item" in the Bidning tab for Row2 and Row3 inside the Section.
You are actually creating a new instance of the section (which includes Row2 and Row3). So this check box should be checked at the Section levl not at the Row level. You have already checked the Section property so remove from Row 2 and Row3.
Thanks
Srini

QAAWS and Live Office together to fetch data on a dashboard

Hello
1.)Can you create multiple queries in the QAAWS and use it on a single dashboard, and how do you fire multiple queries
2) can all the queries be fired at the same time for the dasbboard to be functional or does it fire one query at a time.
3.) Can you create a combination of QAAWS and Live Office queries and create your dashboard.
4.) If I have 5 selection or combo boxes, Is it mandatory to create a row for each selection variation. Or do you have to select the filtered comoboxes as columns in the spreadsheet.
6) In excel how do you arrange data, if 3 items are regular filter components, while the remaining two items are comboboxes with filtered row values
7) Is it possible to create 4 queries based on 4 different universes and join the result set in the dashboad.
5.) Do you have any example of the same.
Thanks
Abhijit Patil
cell 978 804 2951

Hi Abhijit Patil
A lot of questions
1) Yes you can. You can fire them on the same cell changing or on time intervals
2) The queries can be fired as the same time, the query response time will be effected by the query complexity, the capacity of the web server, the capacity of your web intelligence processing
3) Yes - I have a problem with 3.0 when displaying through BI Widgets, it asks me to log in even though I am already logged on to widgets, but other than that they are fine
4) Not sure
6) It is down to you how you do it. You should look at Everything Xcelsius or the Xcelsius portal for best practices
7) Yes, you will bring all the data back and then combine them how you like. Alternatively you can merge them in a Web I document and bring them already merged into the dashboard, (which might save you on soem data volume.
8) I would not be in a position to share the samples as they contain sensitive data
Regards
Alan

Branch Office Communication

Hi,
Supposingly we have many branch offices with good internet speed but no dedicated bandwidth between individual locations.
We need to enable VoIP calling using Internet, can we use any skype product to tie all standalone EPABX system for branch office communications.
Can we have SIP trunks on skype gateway from each location and enable interoffice calling.
Please suggest

Hello Rahul,
I see you are asking about connecting your offices together for calling and comminucations.
Well, Connecting the offices together will require a Communication Server of some sort. Manufacturers like Nortel, Avaya, Cisco, and many others have these type of devices available to accomplish the "link" between your offices, as long as the equipment is all compliant with the Communication Server. I suggest you contact a local agent for these manufacturers and have them take a look at what you have. They will provide you with a quote to get you connected.
As for Skype, making and receiving calls is a snap for us. We provide these services 24/7. We can get you connected in miinutes and have you making cheap calls all day long. The cost just depends on where in the world you are calling. Our "minutes" bundles are very cost effective to use. And, all of your incoming calls are free. All you would need, would be a Skype Online Number, a Managed User for the Skype Clients that want to call you, and SIP Channels to connect to your PBX to talk on.
That's pretty much it. I hope this helps you in your research to get your offices connected and to start using Skype. I have provided a few links for you to look at below.
http://www.skype.com/intl/en-us/business/skype-connect/
http://www.skype.com/intl/en-us/business/skype-manager/
http://download.skype.com/share/business/guides/skype-connect-rates.pdf
http://skypeconnect.voxygen.com/#stage1
Thank You for considering Skype and using the Skype Community Forums.
Regards,
Victor S.
Skype Enterprise Support

MDT capture warning: Unexpected return code while re-arming office 2010, RC= -1073425657

Greetings,
I have a base image I have created with an MDT task sequence, than I am then immediately capturing with another MDT task sequence (the capture sequence is basically the default). After capture, I get 0 errors, 1 warning: "Unexpected return code
while re-arming office 2010, RC= -1073425657".
I am capturing immedaitely after the base image build, and even more strangely, even with Office 2010 removed from my base build, I STILL get this warning! Office isn't even on there anymore (I verified before capture just to double check).
Not sure how or why this is happening - or more importantly, should I care? I've deployed a couple of machines using this image, and both Office and Windows show as activated. Can this safely be ignored, or if not... what is the fix?
Thanks in advance!

Freddie,
Please read your own post again, can you tie the knots together, because your phrasing is going crazy!?!
However, if using the sysprep step from within a MDT task sequence, please scroll through the ZTISysprep.wsf to find that not only the machine will be sysprepped, but also Office 2010 will be automatically re-armed, this is provided in the script already,
so no need to run it on your own.
Ok how do i undo that because thatswhy the message appears to many rearms...
If a machine is domain joined, it will not sysprep and capture. Also I wouldn't sysprep and capture an already sysprepped and captured image again (based on gut feeling) and as always check your logfiles, they can reveal what is going on here.
The machine is not domain joined in the Vm. And i do not sysprep and capture twice.Which logfiles exactly to see?
If this post is helpful please click "Mark for answer", thanks! Kind regards
freddie

Would like to get iSight, iChat and Universal Access to work together

Problem: family member with age-related macular degeneration, form not presently curable. Avid reader, feels isolated unable to do so. Due to age and related problems he's very confused trying to use Universal Access (UA) on ANY size Mac screen, situation in which I suspect he's far from being alone; I also find UA extremely cumbersome and almost unworkable.
Proposed solution: would like to procure him a second, external iSight camera, mount it on a (powerful) light stand next to a 20" iMac, have that contraption positioned over various paper documents which I propose to then magnify and display on the Mac.
iChat, unlike PhotoBooth, does not have the ability to flip images and thus render text readable. Also, zoom on iChat inadequate. PhotoBooth use (taking images, flipping, etc) very cumbersome; also, cannot seem to be able to zoom.
Dedicated CCTV units on the market accomplishing simple video magnification seem outrageously overpriced ($3-4000) and not sure if they have their own unknown issues. They would not afford the potential flexibility of a Mac, accomplishing so many other potential tasks.
Proposed solution would seem to offer a wealth of possiblities if someone may have an idea how to tie it all together. Anybody?
iMac Mac OS X (10.4.7) Intel

Thanks for the tip about QuickTime pro.
I think rather than moving the iSight camera down or up to adjust magnification, that you use Zoom instead.
Zoom is a lot more user friendly with something like the PowerMate. The hot keys for adjusting magnification are just a little too obscure and awkward for my tastes, but having a dedicated knob takes care of that. We use a single press to toggle inverse on and off. A press and hold to activate/deactivate Zoom altogether. Press and spin to adjust contrast.
eMac 1.42 Mac OS X (10.4.7) I paid the going Windows price for a screen reader and got a free computer!

Working two ipads together ...

I'm wondering what the best way would be to tie two iPads together.. the audio.. I'm wondering if they even make a iphone jack with those three ring connectors on both ends?
any ideas?

I would expect to find such a cable. Have you Googled for one? I would search for:
3.5 mm male-male headphone/microphone cable
Just curious, what are your trying to accomplish?

PS script to disable users / Audit and remove Groups / Hide from GAL have bits but need to put it together

Hi All
I am trying to get a script together to run against a specific OU (our disabled Users OU) to make the process of leavers more automated.
I am trying to achieve the 4 main outcomes below
1. Disable User account
2. Hide from GAL
3. Export users group membership to a file based on SamAccountName
4. Remove users from all groups except domain users
I have some parts of this working from other peoples scripts i have found on the web but need to tie it all together which is proving to be beyond my basic scripting ability
Below is what i have so far, this does disable users / hide from GAL and remove groups however as stated i would really like it to export the group membership to a file before removing them so i have a record should a mistake be made.
$users= get-aduser -Filter {(Enabled -eq "True")} -SearchBase "ou=Disabled Accounts,dc=test2k8,dc=local"
Function RemoveMemberships
param([string]$SAMAccountName)
$user = Get-ADUser $SAMAccountName -properties memberof
$userGroups = $user.memberof
$userGroups | %{get-adgroup $_ | Remove-ADGroupMember -confirm:$false -member $SAMAccountName}
$userGroups = $null
$users | %{RemoveMemberships $_.SAMAccountName}
ForEach ($user in $users)
set-aduser -identity $user.sAMAccountName -Enabled $false -replace @{msExchHideFromAddressLists=$true}
exit
If there is anyone here that can help i would be very grateful
Many Thanks
Nick

Try this:
$Users = get-aduser -Filter {(Enabled -eq "True")} -SearchBase "ou=DisabledAccounts,dc=test2k8,dc=local"
Function Remove-GroupMembership
[CmdletBinding()]
param
[parameter(ValueFromPipeline=$true)]
$Identity
process
if ($Identity -is [string] -or !$Identity.memberof)
$Identity = Get-ADUser $Identity -properties memberof
Write-Verbose -message $Identity.samAccountname
foreach ($Group in $Identity.memberof)
Write-Verbose $Group
Remove-ADGroupMember $Group -confirm:$false -member $Identity
$Users | Remove-GroupMembership -verbose 4> c:\users\mmcnabb\desktop\groups.txt
forEach ($User in $Users)
set-aduser -identity $user.sAMAccountName -Enabled $false -replace @{msExchHideFromAddressLists=$true}
It uses the verbose stream to redirect the groups out to a text file of your choice. Please note this is untested so please use with caution.

New App Framework?- Adobe Bridge with MS Access

I'm a retired client/server relational database designer with some OO background but new to scripting and XML. I need to create a single user executive database application to catalog, format and print photos and data.
We have thousands of high quality photos, a fast Win XP workstation, Adobe CS3 and Office Pro 2007.
The use cases will involve scripting PhotoShop, Bridge, and Acrobat as well as storing and retrieving data from MS Access.
My question concerns how best to structure the app. What framework if any I should use to tie the app together.
What app would be best for the primary UI? I know how to create an app within MS Access, but it would be clunky and I would rather build the Client portion in Dreamweaver and only use Access for the back end.
I would have to pass the data back and forth using XML, but I'm not familiar with how to connect a Dreamweaver App with Javascript with XML with MS Access.
What would be a good reference work for me to follow?
YOur opinions and experience would be much appreciated.

More...I discovered that the problem comes up only if i call the findAll.
I mean if I iterate on the primary key calling findByPrimaryKey everything works well. I can do every getXXX from my entityBean.
But if I call the findAll and i iterate on the entityBean Collection I can only call the getPrimaryKey from the enity. Any other getXXX rise up the exception: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Query is too complex.
Also if first I call findAll an after I try to call findByPrimaryKey it doesent work.
What the hell is that?
Please...help me..I'm going creazy!
Thx.

Pivot table that uses a Stored Procedure parameter and filters the data based on it

Hello, my 1st post. I am lost. Please help.
I am trying to create an Excel Pivot Table that has data that comes from an ODC but needs to be filtered based on a parameter from a Stored Procedure. This involves Project Server. I need to filter the results based on the RBS value of the logged
in user. My Stored Procedure can return the RBS as long as the ResourceNTAccount value is given. I cant figure out how to tie this all together.

Hi,
Based on your description,I think this issue should be more related to Programming/coding, you can sumbit a new case to MSDN forum.
As I'm not quite formular with Project Server, all I can tell you is that it is easy to running a Stored Procedure within Excel, however, if you have to pass dynamic parameters you’ll have to turn to VBA.For detailed information,please refer
to:
http://blogs.office.com/2010/06/07/running-a-sql-stored-procedure-from-excel-no-vba/
Wind Zhang
TechNet Community Support

Maintain multiple address for vendor

User purchase article from vendor A at addess#1 but returned article back to vendor A via address#2. Vendor has 2 different departments handling delivery and returns.
How can I configure 2 adddress for the same vendor code?
If I had to used a partner function, what suggested partner function should I used?
My PO order entry currently only accept vendor code.
Suppose I need to add in a partner, like sold-to and ship-to in SD, is there a way to configure the screen?
Where do I do it.
Thanks
bye

Hi Colin,
What is the bussiness reason for multiple addresses for the same vendor?
If the vendor maintains several different physical locations at different addresses, then they should be created as different vendor master records. Then, if they all use the same payment office, they can be partnered to the same invoicing vendor.
If you need to add a seperate address for the supplier location, payment location, billing location, etc, then you must create each of them using the correct account group and use partnering to tie them all together.
Also, there is a way to maintain multiple addresses for the same vendor - but this is used for maintaining different international versions of the same address. (See the international button) - which requires some configuration in central address management.
Or,
Go for one-time-vendor concept else it is not possible .
Also,
Partner function can be used to maintain different address.
This is the advantage of keeping the partner function in vendor account groups.
You create different vendor codes for different addresses and assign the same.
Regards,
Rahul.

HT4041 Why should or shouldn't I upgrade to Lion?

I guess I don't understand what is so important about getting Lion if my computer is working fine on Snow Leopard. Everyone is having so many problems with Lion. Why should I upgrade or not upgrade? I'm afraid my computer will crash or slow down, etc. I have an older Macbook, 2008. I could upgrade but I'm doubtful of the necessity. I don't do any web work, meaning publishing to the web or sharing documents. I basically use it for writing (I have a novel writing software program) or internet stuff and that's it. I'm not a genius as far as all the issues mentioned, so that's why I'm asking. Thanks!!!

karynfromjupiter wrote:
I don't have an Ipad. I don't use my phone in that sort of way either. I'm guessing the icloud is for people who need that upgrade, then?
Yea, it's Apple tying all that together, so you buy a iPhone or iPad then your going to want everything synced on your computer, so you buy a Mac.
It's a trap really, locking one into Apple's universe so they can inflict bloated OS X upgrades like Lion on older hardware and force a premature hardware upgrade. Don't upgrade hardware then they deny services like MobileMe etc like they are doing to 10.6 and earlier users.
I don't advise Lion for any Mac that originally came with 10.5. Originally 10.6 sure, not 10.5, it's because the hardware is slightly dated and Lion is going to do a dam fine job of crippling it and also make all your PPC 10.5 software no longer work.
So Lion is a lose lose for most 10.5 machines, plus it's depressing and strange, everything is wrong about the UI. Reverse scrolling, no "Save As" AutoSave is annoying as heck, no Spaces or Exposé, the programs reload upon restart so your boot time is totally crippled. etc.
Lion is Mr. Hyde to Snow Leopard's Dr. Jekyll.
BTW who need iWork when LibreOffice, a free Office like clone, is totally free and cross platform, Linux, Windows and OS X?
They do ask for donations and you should do so. Apple has enough money and they make it from hardware/iPhones, not software all that much.

Tie 2 offices together

Similar Messages

Maybe you are looking for