Time and Travel Integration

Hi Friends
can you suggest me how to achieve integration between time and travel? All i want is when the employee is traveling, the 2002 attendance also need to be updated so the employee is not counted as absence without notification. I've been searching the forum and most of them say no such integration but that was 3 years ago. I'm not using cross app time sheet. Regards

I'm no expert on CATS either, but an option that i can see from what you have mentioned is that you can write a custom function in the time schema to check for clock in and clock out of the employee, if both of them are not present you can trigger a mail to the immediate supervisor who can take manual action for creating a record in 2002. Alternately you can create an infotype in 2002 after verifying that clock-in/out is not present and follow a workflow process for its approval. You can also check for clock-in/out of the employee, if both of them are not present then check if the employee has an approved travel request, if present then you can create an attendance.
Raghu

Similar Messages

  • ESS-portal integration with Time and Travel management(HR) in R/3

    Hi,
         Im doing with ESS-portal configuration with Time and Travel Management in R/3,So please kindly send me Documents for integration part.I'll b so thankful if u people send me docu as soon as possible.
    send me documents to [email protected]
    thanks
    pavi

    Hi
    Please go through this functional module HRMS_BIW_EXTRACT_PY1 in r/3 side to know the exact table where u r getting the data.
    There are lot of tables involved in HR-payroll info types.
    As far as your problem is concerned you take one employee and go to PA20 and analyse the payroll for each week or twice a month (depends up on ur client)
    run the report on the payroll cube and find out exactly what u want.
    Thanks
    Roopa
    Assign points if help full

  • Mobile Time and Travel  on a PDA with MAM

    Hi Everyone,
    Can I deploy Mobile Time & Travel to a PDA instead of a Laptop?  We will be using a PocketPC Device for the application but not so sure if you can run Mobile Time & Travel and Mobile Asset Management with the same device.  Please advice.  Thanks.
    Dai

    Hello Dai,
    Mobile Time and Travel is really designed for laptops.  The UI would not be user-friendly on a PDA (always scrolling).
    Regards,
    Nadia

  • Mobile Time and Travel supporting Device types

    Hi Mobile Guru's,
    We would like to implement Mobile Time and Travel to our client. Currently they are using the PDA's. I have gone through installation guides of MTT and came to know that MTT is possible only for Laptops. Is my assumption is true? Please let me know. Actually our client wanted to implement MTT to their PDA's which they are currently using. Where can I get information that MTT supports which type of device types? Please help me.
    Thanks in advance.
    With best regards,
    Ameer Baba.

    Hi Ameer
       The MTT application is supported only on Laptops and doesnt support PDAs and your assumption is absolutely true. More information on this can be obtained in the following link http://service.sap.com/instguides In this link navigate to Installations and Upgrades->Entry by Application Group->SAP xApps
    ->SAP xApps for Mobile Business->SAP XMTT.   Also the following notes will be useful for the latest version of MTT i.e 2.0 which is JSP based rather than MicroITS.
    892203 - Mobile Travel Expenses 2.0 - Composite Note
    892204 - Mobile Time Sheet 2.0 - Composite Note
    942046 - Restrictions for Mobile Time Sheet 2.0
    942044 - Restrictions for Mobile Travel Expenses 2.0
    Hope this is helpful
    Best Regards
    Sivakumar

  • Transaction Codes and BAPIs for Mobile Time And Travel

    Hi All,
    Please can anyone give me the "Transaction Codes" and "BAPIs" that are needed and used for developing an application for Mobile Time and Travel.?
    Please help me out.
    Cheers,
    Anu.
    Message was edited by:
            Anuradha Yandamuri

    Hi Anu
    Below are the Functional Modules used in the standard MTT application.
    <u><b>RFC's for Time Sheet (MTS)</b></u>
    CATS_MY_GET_MASTER_DATA      
    CATS_MY_GET_PICKLIST_FIELDS  
    CATS_MY_GET_REJECTION_REASONS
    CATS_MY_GET_TEXT_ELEMENTS    
    CATS_MY_GET_TIME_DATA        
    CATS_MY_GET_BOOTSTRAP      
    CATS_MY_GET_CUSTOMIZING_DATA
    TT_GET_PICKLIST
    <u><b>RFC's for Travel Expenses (MTR)</b></u>
    WAF_TRIP_ADD_RECEIPT          
    WAF_TRIP_CHANGE_RECEIPT       
    WAF_TRIP_CREATE               
    WAF_TRIP_DELETE_RECEIPT       
    WAF_TRIP_GET                  
    WAF_TRIP_GET_CREDIT_CARD_ITEMS
    WAF_TRIP_GET_CUSTOMIZING      
    WAF_TRIP_GET_DELETED_LIST     
    WAF_TRIP_GET_LIST             
    WAF_TRIP_MODIFY               
    WAF_TRIP_PROCESS_RECEIPT      
    WAF_TRIP_RESULTS              
    Hope this helps
    Thanks
    Raj

  • Training, Time and Payroll Integration

    Hi
    We are currently implementing SAP HCM in ECC 6.00 SP60
    Could you please clarify the following queries:
    1. How can i pay  Internal Instructor / Trainer for few Business Events through Payroll.
    When i create a internal trainer for a Business Event, automatically attendance type gets recorded in IT2002 based on below mentioned configuration, unfortunately for all business events only one attendance type for instructor and attendee gets recorded in IT2002
    SEMIN     AINST     0001     Attendance type for instructor in T554S
    SEMIN     APART     0002     Attendance Type for Attendance in T554S
    But is there any way where i can send different attendance types for different Business Events for a instructor /Trainer? So that in payroll i can query on the attendance type in IT2002 and pay him depending upon the attendance type.
    Else
    Is there any other way where i can pay the internal trainer automatically from TEM to Payroll?
    Regards
    Srinivasa Naidu

    Hi Marry,
    please check this document by Woody
    Integrating Negative Time and Payroll
    some usefull links and information regarding the configuration
    integration between Time and Payroll
    Best Regards.

  • HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

    Has anyone had the Network time and date error with Apple TV when traveling?

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Why do I get this message every time I travel with my laptop and then return home: To improve reliability, Time Machine must create a new backup for you.

    Why do I get this message every time I travel with my laptop and then return home: "To improve reliability, Time Machine must create a new backup for you."
    I get this on my new MacBook Air, but never got it on my old MacBook Pro.
    Thanks!

    See #C13 in Time Machine - Troubleshooting.

  • Drawbacks of integrating payroll and travel

    Hi All,
    What are the probable disadvantages of integrating payroll and travel?
    Can advances be posted via payroll? Is this advisable?
    What are the steps to follow to transfer expenses to payroll?

    Hi Sigi,
    Thank you for your response.
    I checked a couple of forums and many say that advances must be paid through employee vendor accounts as there is no direct setting to pay via payroll.
    We were thinking of the below:
    Advance will be input.
    Upon final approvals, the Finance Admin will settle and post the trip.
    The corresponding wage type for the advance needs to be manually recorded in infotype 0015 and then transferred to  payroll
    Is this approach a feasible one?
    Regards ,
    Avi

  • Business trip and attendance integration

    Hi experts,
    I was considering how to integrate travel management and time attendance?
    for our case, when travel request is approved I want to create attendance record at attendance infotype (2002)
    how to get through this?
    so when employee has business trip, he will has attendance record. not record as absence.
    note; we are not using CATS.
    thanks.

    Hi Inez,
    Have you find any slution for your requirment of integrating IT2002 and Travel management?
    Regards,

  • Facebook and Twitter integration not working

    I'm have trouble using Facebook and Twitter integration in Mountain Lion. When I click 'Click to Tweet', or 'Click to Post', nothing happens; I don't get the notecard looking thig, and it's like I never clicked the button. Same thing with sharing from an app, except for Twitter. I receive notifications from both just fine, but I'm unable to post. I can tweet something from the sharing menu (link to a webpage with Safari, for example), but I cannot send a tweet using the 'Click to Tweet' button in Notification Center. Also, I cannot post to Facebook by neither sharing nor the 'Click to Post' button. So far I have tried sharing with Safari, Finder, and Preview, all with the same results. (Facebook sharing with iPhoto does work, but I don't believe that is integrated with OS X.)
    I have also tried the following, with no luck:
    Checked my settings on the Facebook and Twitter sites.
    Removed my acounts and re-added them.
    Obviously, my internet connection is working.
    Added my Facebook account to the 'Guest User' account, and another administrator account.
    Had a friend add his Facebook account to his own (limited) account on my computer--he could not post to Facebook either.
    I believe the last two things I tried indicate that this is a system-wide problem. A couple more things to note: 1) there is no kind of error message; it just sits there, like nothing happend, no 'spinning wheel' or anything. 2) It DID work before. Twitter worked when I first upgraded to Mountain Lion, and Facebook worked when I installed the 10.8.2 update. I don't use either often enough to know when exactly they stopped.
    Here is a video illistrating my problem.
    It's been driving myself crazy with this over the past few days, and can't seem to find an answer anywhere. I also seem to be the only one with this problem.

    First, I would eject whatever it is that you downloaded. Go to Finder and eject it that way or depending how you have your system set up, do the two finger tap and Eject it. Download the link above. Once it downloads, double click it to install it. It should work. If it doesn't you need to use your Disk Utility to check for errors. Click your Finder again and then Applications. Scroll down to Utilities and then Disk Utility. Click on your hard drive and you will get a menu of items on the right side. Towards the bottom, you will see a button to Verify Disk Permissions. Click that and let it run. It may take a few minutes to finish. Once it's finished there may be a list of things wrong with your system. Click the Repair Permissions and let the computer do it's thing. Use Disk Utility at least once a month to make sure everything is in order on your system. If this doesn't fix it, I don't have any other suggestions. I'd hate to say do a fresh install but that might be the next step if this doesn't work.
    Something else to consider is that is if you use Time Machine and the system did work at one point, you could go back to the last known good point and reinstall that back-up. You would lose anything you have saved since that point (obviously). If you take steps to back up your information, that should not be an issue. (For me), Time Machine works as advertised. If you are not backing system up regularly, shame on you. You need to start ASAP backing up. It's an easy process and it's times like you are having now, that make the small preventive maintenance, worth extra time and effort.
    Good luck.

  • PS and PP integration

    Dear Experts,
    Good Morning....
    Please suggest me PS and PP integration customization steps.
    Regards
    Lallan

    PP is not a major player in PS as far as integration is concerned. It is through Material Management that Production Planning is informed of Production Orders using special settings in the Material Master.
    One another area, the PP and PM modules share Work Centers with Project System.
    The Work Center is needed for Capacity Planning and Planning costs. If we integrate this Work Center with HR module, we will be able to select only the people who have been assigned to the Work Center. We can specify the amount of work the individual will contribute. This forms the basis for capacity planning.
    Hope u must have understand.
    PS - Process
    After creating the project next step is u want to do cost, Revenue & Budget Planning for the project
    in the t-codes CJ42, CJ30 & CJ40 respectively. Next step is creating the Sale order in va01 T-code.
    But I have internal project scenario, example: Overhauling of DG set. Assigned work enter & Workforce & also material to network. So shall I do costing? As explained! Is it necessary to create of Sales Order?
    CMP2 - Assign workforce to activities
    CAT2 - Transfer actual time to CATS. In CAT2 we have record the actual timing correct for an activity, on day basis & with personal number.
    MD51 - Run Project MRP to create Planned orders.
    MD04, ME21N, MIGO - Convert planned orders to purchase requisitions and P.O, and goods receipt.
    MB1A - once the goods are brought is project stock; the same needs to be consumed by mb1a -281 Q on the project.
    CJ20n - Attach milestones as per the payment terms.
    VA02 - Copy billing plan to sales order.
    VF01 - Billing
    CJ20n - Project tech complete and closure.
    Hope this will help you,
    Regards,
    ANSAR

  • Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

    Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
    In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
    Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
    Purchase under Points by ISP (No contract)
    Thanks
    Abbas

    Hello sir
           I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
    Thanks
    SATHISH KUMAR

  • In FCPX 10.1 and 10.2, I set FCPX on desktop 2. When i go back to desktop 1 for any reason, my second screen viewer leaves desktop 2 and travels to desktop 1

    I use two desktops in OS-X. One is for FCPX (desktop 2) and one is for default things, browser, email etc.
    I have two screens, and my second screen is my viewer. When I am in FCPX, all is fine, viewer is on screen 2 as it should be but if I flip over to desktop 1, the second screen travels with me and then does not return when i go back to FCPX.. so then I have to three finger swipe up and move the screen back, and it sticks there 1 in 5 tries, if that. I have removed preferences, reset, all the normal obvious things. I am 99.9% sure this is a bug as I can replicate it time and time again.

    I found this as I am too experiencing the exact same issue.  When I restart the synced databases are gone, corrupt and incomplete. 
    How did you resolve this ?
    10.9.3
    FCPX 10.1.1
    Syn n Link X 1.0.18
    I need help this ***.
    -Robert

  • Brief discussion on SAP XI and its' Integration with SAP MDM.

    Hi,
    I have never worked on SAP XI.
    I am discussing it on brief, please give your valuable replies.
    SAP XI consists of System Landascape Directory(SLD).
    SLD Consists of Business System and Techinical System.
    Technical System contains all information about the software
    component. The Business System consists of Inbound and Outbound Business
    System which are used as logical names for data transfer.
    There is communication Channel for Receiver and Sender Business System and n agreement
    is signed between Sender and Receiver.
    Outbound Interface defined for Business System Outbound and Techical System associated
    with the Business System,
    Inbound Interface defined for Business System Inbound and Techical System associated
    with the Business System.
    In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
    Actions, Interface Objects, Mapping Objects, Adapters Objects.
    Mapping Object defines the Structure and Value Mapping.
    Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
    FTP Adapter is used for XI-MDM Communication.
    RFC Adapter is used for XI-ECC Communication.
    Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
    Structure Mapping inside Integration Repository.
    The File Adapter takes the File from the Outbound port of MDM System
    and sends it as IDOC to Receiver Business System.
    Value Mapping must be done between Sender and Receiver interfaces.
    Value Mapping is done by XSLT or Java based program.
    SAP NetWeaver XI Integration Server at runtime:
    Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
    and Call Adapter Proccess are done.
    In SAP XI 3.0 and MDM 5.5:
    Step 1: Create busines system as service.
    Step 2: Create communication channel for each business service. If the system can communicate
    through different channels, then create all possible channel types if necessary.
    Step 3: Create receiver agreement between the systems.
    Step 4: Interface determination:
    - Here you see for the first time the software component mentioned;
    there are some special requirements regarding this software component in relation to the customizing ID mapping.
    - To modify this software component, the customer needs to copy the SAP standard delivered software component
    into its own namespace. The customer is able to modify to create archives
    for the customized ID mapping.
    Receiver determination.
    Configure an FTP Server on the MDS.
    Create a send folder for outbound messages using outbound port(s) for
    remote systems(s).
    Create receive folder inbound messages using inbound port(s) for remote systems.
    This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
    Regards
    Kaushik Banerjee

    Hi Kaushik,
    You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
    1. MDMGX -
             - For lookup table extraction
             - Output in XML format which MDM can import without using XI.
              - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
    2. MDM_CLNT_EXTR -
              - For Main table records.
              - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
    Just a basic understanding...
    Regards,
    Jitesh Talreja

Maybe you are looking for