Time bucket not displaying in planning book

When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
@5C\QError@     Insufficient information about read period transferred
@5C\QError@     Error reading data - Planning book cannot be processed further
Insufficient information about read period transferred
Message no. /SAPAPO/TSM231
This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
Any idea what went wrong?

Hi Nic,
Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
If time buckets profile exist, then check the following:
1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
2) Go to /SAPAPO/TR32  (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
3) Check what periods are used in storage bucket profile.
4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
Thanks - Pawan

Similar Messages

  • Function module to read/write notes in the planning book

    Hi All,
    Can you guyz tell me the FMs to read / write NOTES in the planning book. Notes as in you can right click on a cell of PB and do display notes.
    win full points for the answer.
    Thanks - Chandan

    Check FM /SAPAPO/MSDP_NOTE_WRITE and Use of APO BAPIs page in SCM Wiki.
    Thanks,
    Somnath

  • Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

    No on the book title, no problem there.
    The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
    Thanks for getting back to me.

  • Digital Clock Time is not display present time

    Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
    http://www.newtonclients.com/clock/TEST2.html
    Please help

    Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
    http://www.newtonclients.com/clock/TEST2.html
    Please help

  • My phone will not display my address book !

    My Blackberry 8900 will not display my address book. The addresses are there and on the sim card, but I can not get them to be displayed on the phone. I have tried copying them but does not seem to work. What do I do.  Thanks in advance for all your help.
    Solved!
    Go to Solution.

    Are the contacts in your BlackBerry Address Book AND on your SIM card?
    Or ONLY on your SIM card?
    Open your Address Book, press the Menu key then click on Filters, and make sure no Filters are checked.
    Now, look in the Address Book again.
    Anything?
    If not, please give some detail of your situation.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Key figure display in planning book with respect to Time bucket profile

    Hi,
    I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
    How to make the total quantity 85 to show in the current and future weeks only.
    thanks and regards
    Murugesan

    Hi Murugesan,
    Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
    In this below case, what time characteristic do you have in cube? Is it date, week or month?
    If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
    This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
    If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
    If it's months, then you would need to find out how much data would go to the days in the past week of the month.
    The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
    Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays.  The only other exception I can think of is that you have data in teh days mentioned above.
    It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
    If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
    Thanks - Pawan

  • Time buckets edit/display mode

    Hi
    We have requirement as first two time buckets of the planning book would be in editable mode to the user and from the 3rd bucket onwards the time buckets should be in display mode.
    How can we make the portion of the future time buckets as editable ?
    Thanks & Regards
    KPN Murthy.
    Edited by: p narasimha murthy konidena on Mar 24, 2011 1:59 PM

    KPN
    Look at the SAP help here:
    http://help.sap.com/saphelp_scm70/helpdata/EN/4b/755bee3bf75a18e10000000a421937/frameset.htm
    Look at SAP standard Macros in Macro book 9AEXAMPLES.
    Rishi Menon

  • Stock not in SNP Planning Book

    Hi
    We are doing a global implementation and we have seen the issue where stock exists in live cache, and is correctly considered in SNP Heuristics, but the stock on hand is not displayed in the SNP planning book.
    This is NOT an issue with the stock category, as the same stock category is displayed for Poland and the UK locations.
    This is leading me to think this might be a time zone issue?
    What possible reasons can people think of where stock of the CC category is in live cache but not displayed in the SNP planning book. But another plant location is performing correctly for CC stock.
    S SB

    I have answered my own issue. The stock on hand macro is initial stock + Receipts - Demands.
    Deployment is running in the evening and pushing out the stock, the day rolls over to the next day and then the deployment STR demand is considered history and as per the above formula is netting off the stock.
    This is a symptom of running the SNP run in the evening, not at 00.01am. (Deployment STRs of stock are instantly in the past) which then affects the stock on hand balance.
    Hope that is clear to anyone else having this issue.
    Simon.

  • Display Characteristics-Planning Book Selected Objects

    Dear Experts
    Product , Product group and product category are 3 char. in my Planning Book
    by using shullfer we selected to show  one of the char. but i want the display of selected objects (Top left box of the Planning book) to be showing all the 3 characteristics. based on the filter criteria specified.
    Just displaying one char. specified in show is not enough.
    Same question as in
    Re: Display Characteristics
    any help to fix this issue will be rewarded.
    Thanks in advance
    Shayma

    Shyam Kumar,
    Once you have a selection ID with the 3 chars, you could use Show as only one char, lets say use 'Product' Char here. You can use the Header settings to include the other two - Product group and product category and then drill down on all 3 Chars Values as you wish. You can save this header settings and next time the user logs in, you need not redo these settings.
    Hari Vomkarey

  • Fonts are not displayed properly when Book assembled for PRINT Preview

    I am having an issue with fonts not being displayed correctly within Aperture Book design application. I have used a script font (Snell Roundhand) for the cover of my book that has quotations marks around the title. However the quotations marks that are displayed after the book is assembled, go to the default Times Roman not Snell. They do not match the Snell Roundhand font quotations that are supplied with that font. What gives? Also . . . after they the dust cover is displayed the next page is the hard bound foil page which displays Times Roman for the title . . . not the font I have selected (Snell Roundhand). What gives with that? Is there a way to change the font before it goes to the printer. Any work around ideas. I have tried several different fonts to see if anything else comes close. Everything looks like a variation of Times. HELP . . . trying to hit PURCHASE BOOK . . . . hopefully without flaws!!

    I kind of remember the foil letters might be fixed - cannot remember but here is a related conversation that might help (or not)
    [Aperture Cover Fonts|http://photo.rwboyer.com/2009/04/16/aperture-books-hardcover-title-font>
    RB
    Ps. I have not done this through the Apple book printing service myself - I always order soft cover as give aways and use another service for other printing but live vicariously through others withe the Apple hardcover books.
    Message was edited by: rwboyer

  • How Cost is displayed in planning book

    Hi
    Sources 4001,4002 and destinations 3001,3002,3003 & 3004,After SNP optimizer run,the following results are displayed
    4001 to 3001 -------900MT is sourced from 4001 to 3001
    4001 to 3003--------1000MT is sources from 4001 to 3003
    How cost per MT is displayed along with quantities in the planning book after optimizer run
    Thanks

    After optimizer run the following allocation qty is displayed
    4001 to 3001 -------900MT is sourced from 4001 to 3001
    4001 to 3003--------1000MT is sources from 4001 to 3003
    after optimizer run  customer want Qty(900MT) & Cost per MT to be displayed for sourcing from 4001 to 3001(Refer above scenario)
    as you said if its not possible after optimizer  run is it possible to develop a customized report based on optimizer results displaying Qty(900MT) & cost incurred per MT
    Cost per MT(For sourcing from Qty(900MT) from 4001 to 3001)=procurement cost per MT+transportation cost per MT
    Thanks
    Poorna

  • APO Cube data is not showing in Planning Book

    Hi All,
              Please help me with the following issue.. We use to load the data to APO cube manually from Flat file by executing BW (Backlog, Historical) reports every week. (not a good practice). That time Planning book was working fine.. And now we automated this process by creating the data marts from BW ODS to APO Cube and the loads are successful with process chain.. But I don’t see cube data in Planning book.. In this process the existing info objects properties (Alpha has been removed) has been changed on APO side for mapping and loading purpose.. So when I load the data , the load is successful but I don’t see the data in the Planning book(Note : the cube was refreshed and I guess I need to generate CVCs and do some thing in TSCUBE).. Please explain me the details steps. I am BW consultant and don’t know much on APO.Present status i see the data in APO cube and not in Planning Book
    Thank you
    Arya
    Edited by: karan s on Apr 3, 2008 8:58 PM
    Edited by: karan s on Apr 3, 2008 8:59 PM

    Hi karan
    have you loaded the data from APO cube into the Planning book with TSCUBE ? you can add this step in your process chain also.
    If you have made changes in the strcture of BW data mapping then you dont need to change CVCs.

  • Graph Title not consistent with Planning Book Name

    Hi Gurus,
    We are facing a strange issue in APO DP .
    Whenever we are opening a dataview with graph, graph title is not in synch with the Planning book name.
    This is happening only for certain users(Not all).
    Please advise if we need to adjust any user specific settings.
    Thanks & Regards,
    Rahul

    Hi Rahul,
    Open your planning book, and load the data view
    Once it is done, display the graphic view
    Then click on Switch graphic settings.  Once it is done,
    on the RHS it will display the graphic settings.
    Goto Value axis  >  Title , under caption ---> change
    the title and then press Save Graphic settings
    Regards
    R. Senthil Mareeswaran.

  • Data selection not showing in Planning book

    Hi everybody,
                We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
    Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
    thanks
    arya

    There might be few things you should probably check
    1) In the planning object structure just activate the POB. through the context menu.
    2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
    3) Create time series to the PA or perform initialization of the PA.
    4) Try creating a CVC manually and see if it allows to create.
    Atleast now you should be able to see the key figures in the Planning Area.
    Let me know if it works.

  • Time Machine not displaying backups of mounted /Users

    Bottom Line: Time Machine 'Warp' GUI does not display available backups when using Finder to browser user directories stored on HDD, mounted on /Users in /etc/fstab, even though the backups exist and I can navigate to them from the Finder to the backup disk
    Machine Config:
    1. OS X Lion 10.8.5 on MBP 2.53 GHz Intel Core 2 Duo running on a SSD as the OS X boot drive, and the OEM HDD in a drive tray in what used to be the superdrive bay.
    2. The HDD is a single partition dedicated to Users and mounted to /Users. When unmounted, the SSD has a /Users dir with a single admin-enabled user still present to ensure I can still boot and log in as that user in the event the HDD does not mount.
    3. The /Users dir mounts successfully using /etc/fstab
    4. The HDD still displays in the Finder window and the desktop, which is not a problem for me
    I've posted a work-around at http://www.andrew.cmu.edu/user/mlanham/currEvents.shtml that explains I can, inside the TM restore GUI (what I've heard called 'warp' and 'space') select the machine label under the Devices list in Finder (on the left side). I can then expand folders without double clicking them, and get TM to restore the file(s)...TM sees the backups as present and available and functions as I would expect. 
    However, when I select a labeled location (e.g. Google Drive, Downloads) under the Favorites label, still inside the TM restore GUI, all the backups are black and do not otherwise indicate they are present for restore actions.
    I thought I read a blurd somewhere warning me of this situation, but I cannot find the blurb anymore--surely I'm not the only one to have experienced this. Has anyone else experienced it? Overcome it?
    More importantly, I am interested in knowning if this is 'as designed' behavior or a bug in TM's GUI presentation. Why should TM care if a dir is a mounted partition or not...if it was present during backup, and present during a restore request, it should render the available backups as available to select. Not make me do a work around.

    Earlier, I posted that the OP in https://discussions.apple.com/message/8182305#8182305 resolved this situation by making a softlink from SSD /Users to HDD's /Users and removing the entry from /etc/fstab. Initially, I thought this was a bad idea, as if the HDD fails to spin up and mount to /Volumes, that the system would fail to boot as it would not find a /Users directory available.
    Then I read a different post that implied that if that happens, simply boot to single user mode and fix the trouble with the HDD.
    Is this soft-link + boot to single user mode a better choice than /etc/fstab to mount the HDD to /Users (where the SDD has a non-empty /Users with a single admin-enabled user in it)?

Maybe you are looking for