Digital Clock Time is not display present time

Dear all i have one doubt, i want to confirm please chek my clock time is not display properly what is the problem with this coding
http://www.newtonclients.com/clock/TEST2.html
Please help

Similar Messages

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

Powerbook pismo with OS 10.4.9 not display battery time

I was very curious why my newly upgraded powerbook pismo (400 MHz, 1 MB, 55 GB drive, firewire, etc) would no longer display "time remaining" when on battery or external voltage.
I was getting very close to ordering another battery (6600 mAH) for $150 but decided to do some research first. Lo & behold on the archives there were 30 entries about the same problem on OS 10.4. So in a nutshell, a powerbook pismo with OS 10.4 will not display battery time remaining no matter how many brand new batteries you mail order.
I'll learn how to use system profiler more often (remaining capacity mAh/amperage = time remaining).

There's nothing at all wrong with preferring APpleWorks and wanting to continue using it. It's a bit unfashionable these days, but there are many people who have discovered how powerful, flexible and easy it is to use and continue to use it despite the development of alternatives!
Of course, it does have the drawback of not being intel native, so performance on intel-based Macs will be relatively poor in comparison to iWork, but if that doesn't cause you any problems in use, then it's purely a matter of what you want to use not what anyone else thinks is appropriate!
That said, what exactly is the problem? Can you scroll by clicking the scroll arrows and dragging the scroll bar, but not by using the mouse wheel?

Time Machine not displaying backups of mounted /Users

Bottom Line: Time Machine 'Warp' GUI does not display available backups when using Finder to browser user directories stored on HDD, mounted on /Users in /etc/fstab, even though the backups exist and I can navigate to them from the Finder to the backup disk
Machine Config:
1. OS X Lion 10.8.5 on MBP 2.53 GHz Intel Core 2 Duo running on a SSD as the OS X boot drive, and the OEM HDD in a drive tray in what used to be the superdrive bay.
2. The HDD is a single partition dedicated to Users and mounted to /Users. When unmounted, the SSD has a /Users dir with a single admin-enabled user still present to ensure I can still boot and log in as that user in the event the HDD does not mount.
3. The /Users dir mounts successfully using /etc/fstab
4. The HDD still displays in the Finder window and the desktop, which is not a problem for me
I've posted a work-around at http://www.andrew.cmu.edu/user/mlanham/currEvents.shtml that explains I can, inside the TM restore GUI (what I've heard called 'warp' and 'space') select the machine label under the Devices list in Finder (on the left side). I can then expand folders without double clicking them, and get TM to restore the file(s)...TM sees the backups as present and available and functions as I would expect.
However, when I select a labeled location (e.g. Google Drive, Downloads) under the Favorites label, still inside the TM restore GUI, all the backups are black and do not otherwise indicate they are present for restore actions.
I thought I read a blurd somewhere warning me of this situation, but I cannot find the blurb anymore--surely I'm not the only one to have experienced this. Has anyone else experienced it? Overcome it?
More importantly, I am interested in knowning if this is 'as designed' behavior or a bug in TM's GUI presentation. Why should TM care if a dir is a mounted partition or not...if it was present during backup, and present during a restore request, it should render the available backups as available to select. Not make me do a work around.

Earlier, I posted that the OP in https://discussions.apple.com/message/8182305#8182305 resolved this situation by making a softlink from SSD /Users to HDD's /Users and removing the entry from /etc/fstab. Initially, I thought this was a bad idea, as if the HDD fails to spin up and mount to /Volumes, that the system would fail to boot as it would not find a /Users directory available.
Then I read a different post that implied that if that happens, simply boot to single user mode and fix the trouble with the HDD.
Is this soft-link + boot to single user mode a better choice than /etc/fstab to mount the HDD to /Users (where the SDD has a non-empty /Users with a single admin-enabled user in it)?

Portlets not displayed first time until refresh

Hi,
I have a strange bug when using WLP 8.1 sp5.
When I go on a page for the first time, my page (Portal Page) is bad displayed : its title is diplayed but the inner portlet is not displayed.
When I look at the source, I can see that the Portal rendering stopped at the page level (no HTML for the skeleton of portlets).
If I refresh the page (just F5 or refresh button), the portlet "magically" appears.
Do you have any idea ?

For the both .portal and desktop
It happens after login.
I use a backing file with handlePostBackData method to check the login action.
If everything is ok, I redirect the user to the private space.
On this space, another backing file check that the user is authorized to access to the private space (so it checks for destroyed sessions, url hacks, ...).
I can put the code of the backing files if you need it.
After some tests, it seems to be a problem in relation with the page label. If the page label is a book , the portlet don't dipslay, but if the label is the full way to the page, it appears immediately.

Time bucket not displaying in planning book

When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
@5C\QError@ Insufficient information about read period transferred
@5C\QError@ Error reading data - Planning book cannot be processed further
Insufficient information about read period transferred
Message no. /SAPAPO/TSM231
This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
Any idea what went wrong?

Hi Nic,
Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
If time buckets profile exist, then check the following:
1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
2) Go to /SAPAPO/TR32 (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
3) Check what periods are used in storage bucket profile.
4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
Thanks - Pawan

Datediff formula not displaying negative times

I have a DATEDIFF formula between two times that is not displaying a negative time when for example:
DateDiff ("n",next({caseintraop.orsetup_start_datetime}), {caseintraop.pat_or_out_datetime},
so if the time it pulls is 930am-1000am, it gives us 30 not -30 min.
When the field is formated to show negatives it does the oppostie and shows the postive times as negatives and vice versa.
Is there a way to format the formula to show the correct resulted time diffence?

You wrote
DateDiff ("n",next({caseintraop.orsetup_start_datetime}), {caseintraop.pat_or_out_datetime},
so if the time it pulls is 930am-1000am, it gives us 30 not -30 min.
This will never be negative because start time 9:30 am is before end time 10:00 am
DateDiff does not subtract end time from start time, if you want it to be negative just reverse the order.
Ian

Time Capsule Not Working With Time Machine

I'm trying to backup to my Time Capsule, which I haven't used in over two years. It had been displaced because of a change in internet service providers. The new provider came in with a Linksys router, setup a sub-network, and left the Time Capsule/Airport out of the mix.
So I want to return to using my Time Capsule and have since pulled out the Linksys router, and got the Airport functionality working with the existing, primary network. In other words, the Time Capsule/Airport is working to extend the range of the network.
Problem is this: I cannot backup to the Time Capsule. Even if I'm connecting to the Time Capsule via ethernet, I cannot get it past the 'preparing' phase when running Time Machine. It stays at the phase for what seems to me an inordinate amount of time (30-45 minutes). If I go into System Preferences, the Time Capsule disk doesn't make itself available when using it with Time Machine. If I choose to go into the Star Wars display of Time Machine, I can sort of see the various backups, but I can't roll back to them, and the backup indicator on the right looks sort of ghosted, like it's there but it's not there.
How do I know if the disk within the Time Capsule is failing? Could that be what's going on? How would I test it? I get a green light on the front of the TC, but not everything is hunky dory since I'm not able to backup.
Is part of my problem that I'm using a not up-to-date version of Airport Utility? –I'm using 5.4.2

Oh and here it is, on this page, Section D, #1:
"Section D. OTHER PROBLEMS RUNNING BACKUPS
D1. Stuck in "Calculating changes" or "Preparing""
and then the Apple supporting doc, as well:
http://support.apple.com/kb/TS1516
Fabulous. Thank you.

Why does the editing feature work at times and not at other times ?

I have paid for the right to edit documents created as PDF's. Now when I sign in and try to edit the documents the program only works once in a while.

Hi Sara,
Yes, the Export PDF subscription is what I am having trouble with.
For example, when I open and Export a file as attached to remove our vendors information and substitute our company info to provide export documentation for
our lumber shipments I am not able to edit the document.
I bought the subscription for this exact purpose to save having to recreate these documents on my own time. This is very time consuming as it must be done by hand
in Excel.
I was able to edit a similar document yesterday but today, no dice ???
Sincerely,
[private information removed]
WILL WHAT WE DO TODAY - SPEAK WELL OF US TOMORROW

ICal events are displayed in the local time zone, not at the time they are supposed to be

When I enter events in iCal (or in my iPhone calendar), they always display at the time for the zone that I am currently in, even when they occur in a different time zone. For example, if I have a lunch scheduled at 12 pm Monday in Vancouver, I want to see that I have something scheduled at 12 pm on Monday, even if I am in Hong Kong. But even if I have time zone support enabled, the event appears at 4 am Tuesday. This makes it hard to look at the calendar and know what events I have scheduled for what times when I am doing a lot of travel. Is there anyway that I can get the event to show up at 12 pm on Monday no matter where I am in the world?
Thanks

This means you're still using Flex 1.5 as your runtime. SAP has introduced Flex 2 RT on SP14 patch 1 onwards. There were a lot of bug fixes and also several new functionality introduced there. I suggest you consider upgrading to the latest SP. Note that you can upgrade VC apart from the portal (only 3 SCAs to deploy) so this means you don't impact the portal itself and continue to have an up-to-date version of VC.
If you want to solve your problem, I suggest you open a support ticket at SAP and once they see this, they'll let you have those SCAs.
Regards,
Natty

Run Time Prompts not displaying correct members on Composite webform

Hi,
I have a two row composite form. The top form users select a version and a year. The bottom form is static and for read only display of Actuals from prior year. I have a business rule that needs to run on the top webform only. It also needs to bring in the users selection for Scenario and Year. Problem is every time I hit save to run the business rule, it populates the RTP's with Budget and FY14 and not the values I selected in the top webform. I have 'Use Members from Form' selected on the business rule attached to the composite form. I tried attaching business rule to source form but it doesn't run then. It must be attached to the composite? I think it gets confused and doesn't know which members to use as there are two forms? Any options here?

See if this helps:
When launched from a form, the values of members in the Page/POV take precedence if the Use Members on Form option is selected, regardless of whether the runtime prompt is hidden during design. The business rule is run without displaying the hidden runtime prompt to users, and the runtime prompt values are taken from the Page/POV members.This is not the case when business rules associated with composite forms are launched on save or from the left-hand pane or when business rules are launched from the Tools, then Business Rules menu. In these cases, the Use Members on Form setting is ignored, hidden runtime prompts get design-time values, and the last saved value takes precedence.
http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch06s07s04.html

Urgent , not display the time using Timestamp

Hello I need to know if the configuration of sunone 7 I can prevent that it sees the hours in a consultation Oracle.
I am making a Select on a field type DATES, that you have date and hour.
Use the TimesTamp class from java. It is not the Oracle nor the version of JDK.
It is urgent!

That is odd and I could only guess at the cause.
If the file came from a digital camera the "code" for the timeline may be corrupt. This could happen if the capture was started and then stopped then resumed.
I would also expect playback of the file to stop when QT Player reaches what "it thinks" is the end of the file. Hitting the play button may continue playback or it could return to the "beginning" of the file.
You may be able to see the timeline by opening the "Movie Info" window. Leave it open as you play the file. Does the time appear in the Movie Info window?

Ical events not displaying correct time zone

Hi All,
I have a weird issue and I'm not sure if it's an iCal or an entourage problem. When one of our Entourage2008 (exchange) users sends a meeting invite to a user in a different time zone using ical, the meeting shows in ical as the time the entourage user who created it, aka not adjusting for the time zone. Entourage to outlook calendar or another entourage calendar works fine, and iCal to iCal works fine; just not Entourage to iCal. Also, a calendar event from the iCal user to the Entourage user does adjust correctly for the time zone difference, which is why i'm exactly sure where the problem lies. I did post in the mactopia forums too so please don't yell at me for posting an 'entourage' problem in a mac forum. any help anyone could provide would be appreciated.
Thank you.
i'm on 10.5.7 with the latest updates for mac os x and the latest office for mac updates, and we are running off a hosted exchange server. we've experienced the same issue whether we have iCalis ("turn on time support") option enabled in iCal or not enabled.

It's annoying as it should not be this complicated. I've implemented a work around, but it's not ideal. I have entourage running but not open, and have sync services set to sync with ical. A new invite comes into mac mail, the user clicks on the ics file (which opens entourage calendar), accepts the meeting, and closes the entourage window. The correct time is in entourage calendar, and then syncs with ical and the meeting has the correct time for that time zone.
If anyone has found a real fix for this problem, please let me know.
Thanks for letting me know I'm not the only one Jim.
Slater

MyBook live duo not displaying in Time Machine

i want to back up my MacBook using time machine and a MyBook live duo. OS is up to date, as is firmware. The MyBook shows in Finder and I can copy individual files to and from it no problem. The MyBook is configured to allow TM backups. However, when I enter TM, the LiveBook doesn't appear in the drop down menu as a drive I can back up to (even though it still appears in Finder with no issues). Really grateful for any suggestions.

Hi Charlie_Potatoes,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like TimeMachine is not recognizine an external HD. I would recommend that you read this article, it may be able to help the issue.
AirPort base stations: Time Machine hard drive compatibility - Apple Support
an external drive that is formatted as Mac OS Extended.
Cheers,
Mario

Accordion problem: child not display first time added

I have an mx Accordion that I extend to add some simple functionality (e.g., replace a child content at certain index). I tested it in a clean window and everything seemed to work fine, until I use it in my "real" app.
The problem is when I add a child content to it, the child never bothers to show up until after I click on another header and then go back to click on the header of the child that was just added. I try to call "invalidateParentSizeAndDisplayList();invalidateDisplayList(); invalidateSize();" in the child content's addhandler, and on the Accordion's "childAdd" handler, without luck.
Anyone has encountered this before? This is probably not the best place to ask for troubleshooting tips but this is really driving me crazy. Any lead is really appreciated!

ok. i figured it out. setting the "creationPolicy" of the navigatorContent to "all" solves the issue!

Digital Clock Time is not display present time

Similar Messages

Maybe you are looking for