Time Constraints for objects and relationships

Hi,
How to set up time constraints for objects and relationships under Org Management?
Thanks in advance.

Hi,
If you need time constraint for subtype A002 then you have to define it over here.
Usually for all standard objects this table gets populated by SAP. But in case you want something which is not there in this table and is as per the client requirement, you can create.
regards
guds

Similar Messages

Time Constraint for Position A012 Relationship

Our organization's structure is such that one position may manage more than one organizational unit. The time contstraint for A012 relationship for positions is currently set to 2, which appears to be restricting me from establishing a position as chief for more than one subordinate org units. In our test environment I changed the constraint to 3 and now am able to have a position as chief of multiple org units. Have I created any potential problems (i.e. with workflow) by changing the A012 time contraint?
Thanks for any advice,
- Lora

Not that I am aware of. In the situation of having the time constraint is the when certain program uses evaluation path, it doesn't know which one of the path to pick since there are more than one path presented.
In the case of workflow, usually it will go to all of them. The first one that open the task owns the task.
But in the case of A012, it should be okay. There are situation where the chief relationship will be towards more than one organizational unit. Where his position belongs to is a different story. As where his position belongs to for the org unit defines who is his/her reviewer for performance and compensation. But he could have as many A012/B012 to manages all those org units as he wishes.

How to set timer intervals for object + and a motion for entering stage

Hi, I am making a simple game but I have a couple problems/queries.
1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the Fruit Ninja game, but not limited to entering from one side, does anyone know how to set this?
2) As I mentioned above my objects appear randomly, I have set a timer when I change the timer from 800 to another number, it just makes all the objects on the screen last for 800 milliseconds all at the same time then disappear and appear somewhere else on the screen for another 800 milliseconds and it repeats, what I am trying to do is make them come at different intervals, for example:
Object 1 - constantly appears, so when the 800 millisecond is over, it comes back on a different part of the stage
Object 2 - I want it to appear every 5 seconds, so when the 800 millisecond is over it will come back on the stage in 5 seconds, but not instantly like Object 1
But I have no idea how to do this :/ anyone have the code needed for me to do this?
Sorry for the long questions, I only asked because I really am stuck, I have been trying to do this for over 2 weeks now.
Thanks very much.
My Code
[Code]
//importing tween classes
import fl.transitions.easing.*;
import fl.transitions.Tween;
import flash.utils.Timer;
//hiding the cursor
Mouse.hide();
var count:Number = 60;
var myTimer:Timer = new Timer(1000,count);
myTimer.addEventListener(TimerEvent.TIMER, countdown);
myTimer.start();
function countdown(event:TimerEvent):void {
myText_txt.text = String((count)-myTimer.currentCount);
if(myText_txt.text == "0"){
gotoAndStop(5)
//creating a new Star instance;
var star:Star = new Star();
var box:Box = new Box();
var bomb:Bomb = new Bomb();
//creating the timer
var timer:Timer = new Timer(800);
var timerbox:Timer = new Timer(850);
var timerbomb:Timer = new Timer(1000);
//we create variables for random X and Y positions
var randomX:Number;
var randomY:Number;
//variable for the alpha tween effect
var tween:Tween;
//we check if a star instance is already added to the stage
var starAdded:Boolean = false;
var boxAdded:Boolean = false;
var bombAdded:Boolean = false;
//we count the points
var points:int = 0;
//adding event handler to the timer;
timer.addEventListener(TimerEvent.TIMER, timerHandler);
//starting the timer;
timer.start();
function timerHandler(e:TimerEvent):void
          //first we need to remove the star from the stage if already added
          if (starAdded)
                    removeChild(star);
          if (boxAdded)
                    removeChild(box);
          if (bombAdded)
                    removeChild(bomb);
          //positioning the star on a random position
          randomX = Math.random() * 800;
          randomY = Math.random() * 1280;
          star.x = randomX;
          star.y = randomY;
          star.rotation = Math.random() * 360;
          box.x = Math.random() * stage.stageWidth;
          box.y = Math.random() * stage.stageHeight;
          box.rotation = Math.random() * 360;
          bomb.x = Math.random() * stage.stageWidth;
          bomb.y = Math.random() * stage.stageHeight;
          bomb.rotation = Math.random() * 360;
          //adding the star to the stage
          addChild(star);
          addChild(box);
          addChild(bomb);
          //changing our boolean value to true
          starAdded = true;
          boxAdded = true;
          bombAdded = true;
          //adding a mouse click handler to the star
          star.addEventListener(MouseEvent.CLICK, clickHandler);
          box.addEventListener(MouseEvent.CLICK, clickHandlerr);
          bomb.addEventListener(MouseEvent.CLICK, clickHandlerrr);
function clickHandlerr(e:Event):void
          //when we click/shoot a star we increment the points
          points += 5;
          //showing the result in the text field
          points_txt.text = points.toString();
                    if (boxAdded)
                    removeChild(box);
          boxAdded = false;
function clickHandler(e:Event):void
          //when we click/shoot a star we increment the points
          points++;
          //showing the result in the text field
          points_txt.text = points.toString();
          if (starAdded)
                    removeChild(star);
          starAdded = false;
function clickHandlerrr(e:Event):void
          gotoAndPlay(5);
[/Code]

The only thing that affects TopLink is the increment by, as increasing this is what allows TopLink to reduce the number of times it needs to go to the database to get additional numbers. Ie, an increment value of 1 means TopLink needs to go the database after each insert; an increment value of 50 allows it to insert 50 times before having to get a value from the sequence. The cache on the sequence object in the database affect the database access times. While it may improve the access times when the sequence number is obtained from the database, but I believe the network access to obtain the sequence is the greater concern and slow down for most applications. It all depends on the application usage and design though - an increment (and application cache) of 50 numbers seems to be the best default.
I cannot say what effect the cache vs nocache settings will have on your application, as it will depend on the database load. Only performance testing and tuning will truly be able to tell you whats best for your application.
Best Regards,
Chris

Different time constraint for 0081-military service infotype and subty

Hello
I need as follows:
To enable entry for each desired valid Subty.
To enable ONLY ONE entry for each Subty.
Time constraint T is not allowed for 0081 so I used
Time constraint Z and I'm trying to maintain T591A.
But I don't find the expected entry which offer me to
define time constraint for each Subty.
Instead, I have only the field "ObjId".
(Are there other IT which behave the same ?)
Regards
Zeev Gavish

hi allan,
cud u plz help me how to sort out this problem actually in mu company the same scenario is here need to be display pe51 form instead of standard hrforms.....
plz help me how will i replace this "hrforms with pe51"..

No Time constraint for S 1001

Dear Team,
When I am trying to create a relationship to Position (S) or (C) Job, receiving a message as "There is no time constraint for S 1001". Unable to locate the exact error location in the customization.
Could anyone know how to solve this. Not maintained any new objects or relationships.
Thanks and Regards
Team Member.

Hi,
Should have been standard for Position (S) and Job (C), but check table V_T777ZIT for IT1001 that the time constraint entry exists for the exact relationship you are trying to create. If it does not exist, you will have to create the time constraint for that object and relationship.
IMG: Personnel Management --> Organizational Management --> Basic Settings --> Data Model Enhancement --> Maintain Infotypes. Select IT1001 and click on the folder on the left for Time Constraint. Only one relationship at a time (Position described by one Job) - time constraint = 2. More than one relationship at a time (Job describes many Positions) - time constraint = 3.
Paul

Time Constraint for Subtype

Dear All,
I have created Customer Infotype 9909 having Five Subtype. Now I have to give Time Constraint to each separate subtype. please guide for the same.
Regards
Mangesh

Dear All,
My created Infotype 9909 having Five Subtype like 1,2,3,4,5 and I have give Time Constraint i.e. 1,2,3 to each separate Subtype. Like same example you will find for Infotype 0006 of Address. For Infotype 0006 the Time Constraint is "T" but there is separate Time Constraint for each subtype of 0006. You will find it in Table T591A. I am sending the following values of Infotype 0006 with its Subtypes having Filed "ZEITB" which shows different Time Constraint for its Subtypes. So like that I want to maintain separate Time Constraint for each Subtype of created Infotype 9909.
MANDT     INFTY     SUBTY     ZEITB     OBJRQ     STEXT
800     6     1     1          Permanent residence
800     6     2     3          Temporary residence
800     6     3     2          Home address
800     6     4     2          Emergency address
800     6     5     2          Mailing address
800     6     6     2          Nursing address
So please let me know the solution.
Reagrds
Mangesh

Time constraints for infotype 0185

Hi experts,
Need your suggestions,
Is it possible to change the Time constraints for infotype 0185. What will be the impact if i change from 2 to 3 time constraints. Please explain...
Shiv.

hi,
what i meant was standard time constraints should not be changed unless there is no other option.
changing the time constraint is a quick fix solution.
these standard time constraints are set after a lot of thought.
like he referred 185 which is personnel ids.
here you can see that it has sub types each sub type can have one record.
you cannt have two passports .
you cannot have two pan numbers etc.
lets us sasy the end user enters some data wrongly and then he realises and creates another record for the same with out deleting the old one.
the system will take it.
but as you can see the data is already duplicated and it gives errors if some work flow or some other functionality is written basing on that input.
regards
nalla

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

How to divide time capsule for Mac and PC back up

Want to know if a cant use my time capsule to do back up for my MacBook and do manual back up for the PC of my wife

How to divide time capsule for Mac and PC back up
It is not possible to divide or "partition" the Time Capsule disk......unless you pull the hard drive from the Time Capsule (which voids the warranty), place it in a separate enclosure or caddy, connect the enclosure directly to your Mac, and use Disk Utility to partition the disk. Then, you must reinstall the disk back in the Time Capsule.
This is a lot of work....best done by an experienced technician. The operation will likely cost more than the cost of the Time Capsule.
Life would be tons easier if you used the Time Capsule with your MacBook and added a separate USB drive to the PC.
If you do not need to divide or partition the Time Capsule storage space, and you are willing to have the Mac and PC share the same space, take a look at an application like Macrium Reflect to backup the PC to the Time Capsule disk.
Still, having done this in the past, things would be much faster and easier for you if you use a separate USB drive for the PC.

T. Code to Check Out Time Constraint for an Infotype

Is there any central transaction code to check the time constraint for an infotype? What will be its IMG Path?
Rgds,
Tapan Shah

Hello tapan
go to SM30 -> V_T582A
it is the table to configure infotypes
regards

Change Time Constraint for Personal Data InfoType

Hi,
How to change the Time Constraint for Personal Data InfoType.
I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
Thanks

Hi,
you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
ex:- without personal details like names no personnel will exist in an organization.
regards,
Soori

Time Constraint for IT 1007

Hi all,
Where can I change the time constraints for IT 1007???
Thanks
Amar

would u please share it with us.....dude...

WebDynpro scenario for Objectives and Appraisals in ECC 6.0

Does anybody know if the scenario for Objectives and Appraisals under WebDynpro is available in ECC 6.0?
Our customer prefer not to use the BSP scenario and we know SAP was working in a new one based on WebDynpro but we can not find any information about that.
Any information will be very useful.
Thanks in advance.
Cristóbal.

Duplicate WebDynpro scenario for Objectives and Appraisals in ECC 6.0.
~Suresh

Time Constraint for Boundary Events

Hi experts.
I am pretty new to BPM (NetWeaver Developer Studio 7.1 SP04 BPM SP05) and I am just making a test process to try to get the time constraint concept right. So far I have three tasks in my process, very much like a textbook example. In my first task I have an input field in which you're supposed to type in your name, which is then saved to the context and triggers the second task when completed. That second task is nothing but a screen displaying "You successfully generated a second task, (with the name you entered in the first task here)."
That works fine so far. Then there's the third task, which is linked to a boundary event on the second event with a start deadline which is critical exception. Here's the idea... You complete the first task (name input), then you fail to start the second task within a certain amount of time defined by an expression, so the process should go to the third task because of the deadline. By the way, it works fine when using a default time, so I must be doing something right so far, the problem is when trying to dynamically change the time with the expression.
What I tried was to define a context attribute type time and date (I tried both) and assigning a time (current time plus whatever amount of minutes) to that attribute via Java coding at the time you click on the button which completes the task, then use that context element in the expression, but that didn't work. I also tried to make that context attribute an integer and set it to whatever amount of minutes I want to use for the deadline, then in the expression get the current time and add that afore mentioned integer to its minutes. That didn't work either.
Please help, I have seriously done some research, and no success yet.
Edited by: david.palafox on Jul 1, 2010 5:54 PM

Figured it out.

Time constraints for IT0377

Hello All,
For the Benefits IT, 0377, we are using a benefit area 08 and subtype 0001.
For this Benefit Area and Subtype, we have configured several Benefit Plans such as BUPA, CYCL, TRVL etc.
We want to set the time constraint such that for an employee, multiple benefit plans for the same period can exist (Time Constraint 3), but at the same time, there should be no overlapping record for the same benefit plan.
for Ex, a BUPA can exist from 01.01.2007 - 01.01.2008 and
a CYCL could exist from 01.01.2007 - 01.01.2008 <i><b>but</b></i>
another BUPA with 15.01.2007 - 15.09.2007 should not be allowed. In this case the earlier BUPA should be delimited.
If I use time constraint 1 or 2 I cannot create multiple benefit plans, as all previous records with the same time range are deleted.
How can I configure the Infotype such that the above requirement can be fulfilled?
Thank You,
Vaishali

Hi..
I don't think it can be done, as this as time constraint depends on the startdate and enddate, and it has no connection with the Benifit Plan .

Time Constraints for objects and relationships

Similar Messages

Maybe you are looking for