Time Machine not detecting Lacie HD

I am attempting to run Time Machine on my AEBS but when I enter the Time Machine preferences and try to Set Up the HD, my Lacie 1TB HD is not coming up in the menu as an option.

Per your earlier post regarding investing in a powered USB hub, my LaCie drive has its own power cord and is plugged into a surge protector.
That being said, do I still need to invest in a powered USB hub?
I previously stated.....
A powered USB hub will likely be required for most drives.....even if they have their own power supply.....because the USB port on the AirPort Exteme is under powered.
I then stated.....
A $15-20 investment in a powered hub to take the stress off of a borderline power supply in the AEBS might be a good way to protect the $180 that you have in the AEBS.
should I consider returning the AEBS and move up to a Time Capsule?
If Time Machine backups are important to you, Apple supports backups from Macs to a Time Capsule and also to a hard drive that is connected directly to your Mac via the FireWire or USB connection.
However, the fact that Apple supports these types of setups does not imply that that you will never have any problems.

Similar Messages

Time Machine not detecting changes in certain folders

I recently noticed that TM does not update its backup from certain folders any more.
I have a deep sub folder inside ~/Documents, and when I create new folders or files in it, they do not appear in the TM backup. The backup contains, however, lots of files created until Oct 2, 2013. Which means that TM used to backup the contents of this folder.
Now, before you suggest that I have probably disabled backup for this folder - nope:
When I check with tmutil isexcluded for paths of files that didn't get backed up, it says[Included].
When I then added another disk as a second backup destination, that backup does contain the missing files. This proves that the source is accessible and can be backed up. So, any suggestions that the path may contain invalid chars or is too long doesn't apply, either.
Somehow the existing backup got stuck, preventing it from updating these particular folder contents.
The system log does not show any messages related to this.
A disk verification with Disk Utility does not show errors, either.
I could just erase the entire backup and start over, but I would rather not lose my previous versions.
Any ideas how to possibly "reset" or fix the backup so that it backs up the missing files again? I suspect that there's some kind of database that TM maintains to be able to quickly browse its backup folders, and maybe that's corrupt somehow, but I cannot find one.
Here's another idea: If the source disk was modified without OS X watching over it (thru fsevents), e.g. by booting from another system, the TM detects this and starts a complete comparison again, right? I wonder if I can trigger that, and that this will fix the issue.
In the past I've seen knowledgeable people indicate that TM backups can get broken once the backiup gets full and needs deletion of old versions (this is the case here), but no one was able to explain what exactly goes wrong and whether this can be fixed. If you know more details, please comment. I just might write a tool for that in the end
(I am an advanced Mac user and programmer; I am using 10.9.3)

Open the Time Machine preference pane and unlock the settings, if necessary. Click the Options button. If there is one particular folder with items that are not being backed up reliably, add it to the list of excluded items. If there are many such folders, add your home folder to the list, or add a whole volume (i.e., what Apple calls a "disk.") Save the changes.
Start a backup, or wait for one to happen automatically. When it's done, open the preference pane again and remove the exclusion(s) you made earlier. Back up again and see whether there's a change.

Time machine not detecting external drive after installing OS X Server

Hi,
Recently I installed OS X Server to set up a vpn but while I have been setting it up I have noticed other Mac's with in the network can not back up anymore the the external hard drive that they used to.
I have made sure that the external drive is on shared folders etc. and the other Mac's can detect the hard drive if I use connect to server to connect to my Mac Mini that the hard drive is attached to.
I have tried to connect it to the Airport we have here but it wont come up on any computers under the Airports name, we are using its hard drive at the moment to back everything up to but we need to back up to the external hard drive ASAP.
The hard drive in question is a SmartStor DS4600 6TB using USB 3 to connect to the Mac Mini and all the Mac's are running Mavericks.
This needs to be resolved ASAP so any help would be greatly apreciated.
Thanks,
Bruce

I *think* with OS X Server to use an attached external drive as a TM backup, it has to be setup this way. You're right, a shared folder is setup under a Backups folder. However, each Mac on the LAN will create its back up in the Backups/Shared and those back ups will be visible if they ever need to restore.
I don't understand why you need to have the back ups created at the root of the volume. And I don't know if or how this can be done using OS X Server. I have always used the TM Backup service and have not tried to share an externally attached drive to be used as a back up. You may be able to do this by going into the File Sharing service and define your back up drive there. You'll have to give read/write permissions to each user just like you would do for any other shared folder.

Time Machine not backing up iPhoto changes (Events, pictures, etc..)

So I finally decided to buy a external hard drive (WD) and backup some of my data to it using Time Machine. The initial backup went well with no problems but what I noticed is as I added events and pictures they were not appearing in Time Machine.
I could open time machine and view that my iPhoto had the current events when the date selected was "Today (now)", but as I went back in time the events that SHOULD of been there were not.
Browsing the folders on the backups showed the iPhoto database to be 13.5gb when actually the new size on my iMac was 19.5gb.
So why does Time Machine not detect these changes? For my backups I have excluded all folders except for the Users folder which contains the iPhoto library. Time Machine is not detecting the changes and backing it up. How can I fix this?

Yeah. At first I thought it was:
http://web.me.com/pondini/Time_Machine/D5.html
Because I was doing that earlier. But then realized I did repair permissions, not disk. But anyways decided to reboot (because I haven't up to this point).
Once it came back up I tried doing another backup. Didn't see it. Opened iPhoto again and exited it (checked Force Quit to make sure it wasn't open). Told it to do a BACKUP NOW. This time it saw a difference of like 7mb.
After it was done, went to iPhoto -> File -> Browse Backups. Went back a couple minutes when I did the backup and my event now has a place holder within the Events but it is pure black. I double clicked the event and it opened up and saw there were 3 files in there. They had default icons and were not showing as pictures like they were. (even though they display fine in iPhoto).
Time Machine seems very flakey to me. My machine is fully updated also.

Time Machine not backing up music added to iTunes since the original backup

My girlfriend has a Macbook and I decided it was time for her to back up. I used Time Machine with my Lacie external HD. The original back up got all the music, documents, etc.
This morning was the first time I had hooked up the external HD since the original back up. I manually ran it and wanted to check if it added the new music and documents. My resume, which I updated last night, was there. But when I looked in the iTunes folder the new music I had added was missing.
Will the daily or weekly back up get the new music files? Is there something I did wrong with set up? Of course I could start over but I'd rather fix the issue and make sure everything is being backed up.
Your suggestions or comments are appreciated.

Erik Griffin wrote:
My girlfriend has a Macbook and I decided it was time for her to back up. I used Time Machine with my Lacie external HD. The original back up got all the music, documents, etc.
How long ago was this?
This morning was the first time I had hooked up the external HD since the original back up. I manually ran it and wanted to check if it added the new music and documents. My resume, which I updated last night, was there. But when I looked in the iTunes folder the new music I had added was missing.
How are you verifying whether they were backed-up? Use +Enter Time Machine,+ not the Finder.
Will the daily or weekly back up get the new music files?
The labels of hourly, daily, and weekly backups are just labels. The process is the same with each. The only thing that's different is how long TM will keep them. A TM backup is a TM Backup.
Is there something I did wrong with set up? Of course I could start over but I'd rather fix the issue and make sure everything is being backed up.
First, check TM Preferences > Options. Be sure nothing is listed there that would prevent any iTunes data from being backed-up.
If you still don't see them, download the TimeTracker app, from www.charlessoft.com.
It shows most of the files saved by TM for each backup (excluding some hidden/system files, etc.). That should show what was actually backed-up.

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

Time Machine backup on Lacie-CloudBox

I am doing backup via Time machine on a Lacie-CloudBox (network drive). The backup folder is empty but there is instead a .sparsebundle file (ca 900GB). Time Machine reports that backups are being done normally. Why is backup folder empty? Thx

Hi, I'm having the same problem. I have recently bought a Cloudbox 2TB. When TimeMachine has done the initial backup, it says that the backup was done succesfully, but when I take a look on the Cloudbox all I can find is a .sparsebundle file and TimeMachine prompting that the sparsebundle is already in use...
I'm guessing that there must be a compability problem since OSX Mavericks because the packaging of the Cloudbox states that it's TimeMachine compatible.
My Cloudbox came with no software, however the LaCie-website provides 2 back-up programs (Win and OSX). I already have tried the Windows one (Genie Timeline) and it works like a charm (who knew huh!). I guess I will trie the LaCie suggested software for OSX now to backup to the Cloudbox and keep TimeMachine do backups to my USB connected external hard drive.
Let's hope we get it working with OSX Yosemite...

Time machine not seeing external hard drive in time line

can anyone help
time machine not seeing external hard drive in time line
before 2013
information say in 2009 is not accessable to view this
i must select external drive from finder
the time machine icon not recognising

thanks for reply
when i open time machine the time line on right side of page
has date ranging from 2014 back to 2010 but only highlight date from 2014 back to 2013
anything before 2013 is greyed out and cannot not be selected
when i touch the pages they only rush towards me a limited amount then stops
also why it shows date as 2014 is strange

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.

Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.
Thanks in advance for any help!

For all things Time Machine see Pondini's excellent information here...
http://pondini.org/OSX/Home.html
Start at Troubleshooting.

Can Time Machine NOT backup USB exFAT drives?

Hi folks. So I partitioned my seagate freeagent drive using exFAT so I could swap it back and forth with Windows. I went to setup time machine and I see the drive is excluded and I cannot remove it from the exclude list. Can time machine not backup that partition type? If not, what can I use that will be usable with both windows and os x and allow me to back it up with Time Machine? Thanks.

For fat or ntfs, you have to use something like Winclone to clone those partitions as a backup, but I have not tested winclone in Lion to see if it still works

HT3275 Time Machine not deleting oldest backups when the disk is full

Time Machine not deleting oldest backups when the disk is full

Unfortunately, when this happens, Time Machine cannot erase enough space to create room for the new backup. Your options now are:
1) Add a new Time Capsule or a hard drive to the USB port on the existing Time Capsule and continue with backups
2) Manually delete backups from Time Machine....which is a long and tedious process. After a few hours, not much space will be reclaimed and it will not be long before the Time Capsule is full again
3) Erase the Time Capsule....if you really do not need all the old backups from months ago....and start over with a new Time Machine backup and move forward again

Time Machine not configured / won't open / but it runs?

I'd appreciate some assistance troubleshooting a Time Machine issue.
I recently purchased a 2TB Time Capsule and set it up on my home network. I have set Time Machine up using it to back up 2 out of 3 MacBook Pros with no issues.
On the third MacBook, the Time Machine setup appears to work just fine (I have selected the Time Capsule disk, it has done the first full backup and periodic incremental backups). However, I have the following problems:
I cannot open the Time Machine application. Clicking on the App causes absolutely nothing to happen. No error. No windows. Nothing.
The icon in the menu bar is greyed out and gives no indication of backups in progress (no spinning clock like the other macs). Clicking on it reveals the top, greyed out menu choice that says "Time Machine not configured". (I can open time machine preferences and observe status from within that window.)
I have searched this and other sites for solutions. I have done steps A4 and E4 from this site (repeatedly) with no success.

I'd appreciate some assistance troubleshooting a Time Machine issue.
I recently purchased a 2TB Time Capsule and set it up on my home network. I have set Time Machine up using it to back up 2 out of 3 MacBook Pros with no issues.
On the third MacBook, the Time Machine setup appears to work just fine (I have selected the Time Capsule disk, it has done the first full backup and periodic incremental backups). However, I have the following problems:
I cannot open the Time Machine application. Clicking on the App causes absolutely nothing to happen. No error. No windows. Nothing.
The icon in the menu bar is greyed out and gives no indication of backups in progress (no spinning clock like the other macs). Clicking on it reveals the top, greyed out menu choice that says "Time Machine not configured". (I can open time machine preferences and observe status from within that window.)
I have searched this and other sites for solutions. I have done steps A4 and E4 from this site (repeatedly) with no success.

"Time machine not configured" & Can't reset to factory setting.

Once I removed the Time capsule from my List to back up again. But after removing when i connect the time capsule, the amber light keep on flashing and i can't set up the Time capsule. Although i get it in the wifi network. ( I attached the Pic marked Majmadar's Wifi Network ). Now when i click on the icon of time capsule it shows " Time machine not configured ". Even when i open the time machine preferences i don't see My time Capsule in my list. Please help me to
solve my problem. Thanks in advance.

Start over and redo the setup from a manual factory reset.. do NOT use names like you have now.. this is problematic on Yosemite..
Also do a full reset on Time Machine.. See A4 here. http://pondini.org/TM/Troubleshooting.html
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is where they discuss a true solution.. replace the rotten DNS app in Yosemite with the one from Mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Time Machine not recognizing full space available on NAS.

I recently purchsed and set up an Iomega Storcenter ix4-200d NAS with Time Machine support. The NAS has 8 TB storage total, with ~4.6 TB available.
I have TIme Machine support turned on in the Storcenter, assigned to a folder called "Time-Machine." In my OSX Time Machine preferences, I select the "Time-Machine" folder on my NAS as the back-up disk, and my Mac connects to it just fine.
The challenge is Time Machine returns an error saying there isn't enough space on the backup disk to complete the backup.
For some reason, Time Machine is only recognizing 536.36 GB of space available on the backup disk, even though there are ~4.6 TB available. I tried manually moving my iTunes media folder (~700 GB) to the "Time-Machine" folder on my NAS to see if the Iomega NAS was arbitrarily setting a max size to a Time Machine folder. I was able to manually move just under 1 TB of data to the same "Time-Machine" folder that Time Machine says only has 536.36 GB of space.
I tried deleting the Time-Machine store on my NAS, turning Time Machine support off, then turning it back off and creating a new "Time-Machine" folder. I did this several times and still get the same behavior.
I even tried running Time Machine piecemeal, excluding larger folders at first and running a back-up, to see if maybe Time Machine wasn't liking that large of an initial backup. This worked, and then I gradually removed some exclusions and ran back-ups again, so each back-up size was never more than 200 GBs or so. However, after several back-ups, I received the same error message saying there wasn't enough space on the backup disk when the total sparsbundle size reached 536.36 GBs.
Since I can manually move more than 536.36 GB of data to the backup disk, I'm guessing it must be something with Time Machine not recognizing the full space available on the NAS.
Any ideas? Has anyone seen this before?

Hello,
not that it helps, but I see the same on the exact same configuration. My message is also about not having enough space, ip-to exactly the same amount of room being available (only 536.36 GB available)?
I tried everything, including a full reset of the StorCenter, but to no avail. The timemachine backup used to work, however I thought that this was just because it didn't exceed the limit of one physical disk in the StorCenter (I've got 4 x 1 TB).
What is strange is that the original author has 2TB disks and still has the same problem? So it likely isn't related to the physical disk size. It seems like the maximum backup can only be 536.36 GB ??

Time Machine not backing up

Why is my Time Machine not backing up my documents, folders and files.
I have a Mac oss 10.5.4. 2 GHz Intel Core Duo, 1.5 GB. I have been trying to remove files as I'm running all my programs slow. I recently installed the recent ILife upgrade.
Often I would go in and turn off the hourly time machine backup because as I was working on memory intensive programs such as Photoshop I found it may have been linked to crashes. This is particularly concerning as the backups aren't accessible anyway.
Okay, this is the stupid part - on my part - I included my (House) folder in the files not to back up. I was mistaken as to this being a way not to have redundant back ups.
However; the only file now that is in the do not back up is the (time machine backups) and still nothing is saving - particularly concerning? iphoto file. see below.
Now this is concerning! I restored all photos from "March 13, 2008" - it's september. to IPHOTO from Time Machine. I don't know what changed since then(?) I thought it would add these folders into my i photo cache. This of course has involved a software upgrade since to iphoto. I was prompted for upgrade to the restore. So I said yes, to assure the photos added? where in a compatible format. However; instead it has erased all my photos SINCE. Are my photos irretrievably lost?
Why won't my files back-up for retrieval? Can I restore my settings from March 13, 2008 when my Time Machine back-up worked?
I find it horribly confusing that I no longer can access the photo cache, instead having the 'iphoto cache' icon.
This feels like PC headache. I am about to give up!

One thing you can check (using disk utility info button) is that the disk used for backing up must be in the Mac OS Extended (Journaled) format, and must have Access Control Lists enabled. Permissions must be set so that you are allowed to use the disk, and the disk can’t be read-only. There must also be sufficient room on external disk for the entire TM backup. Since apple recommends just using TM on the disk, one thing to contemplate if having problems you can't resolve is to reformat as the above and start from scratch.

Time Machine not detecting Lacie HD

Similar Messages

Maybe you are looking for