Time-Out for Process with Correlation - Avoiding blocked Queues

Hello,
I have the following requirement, it would be great if you could share your opinions and knowledge on it:
If have an integration process which opens a correlation and sends out an asynchronous request message. The response normally arrives after 10 minutes and is correlated to the process using a correlationID that has been activated by the request message. Additionally there is a deadline branch which terminates the process after 1 hour.
So far this works fine.
However there might be some very rare cases where a response is delayed (e.g. if there is maintenace work on partner side). So it could be the case that a response arrives a day later when the process instance is already terminated:
My questions are now:
1. How can I avoid that the inbound queue is blocked with the response message that cannot find an active correlation?
2. Best thing would be to store the response message on the file system in case no more active correlations are open.
So basically the logic could be:
If message arrives, check whether process instance with corresponding correlation is active, if yes then send to process, if no send to file receiver.
Is this possible?

Thread closed - no solution so far.

Similar Messages

Network time-out for PowerBookG4 with AirPort Wireless-B

Anyone with a fix?
My previous AirPort Extreme station worked the PowerBookG4 wirelessB well. And those settings were transferred to the TimeCapsule with installation. All my other machines connect perfectly to it. Even a Windows machine. But somehow now the PowerBookG4 gives me an error when trying to connect. : Network Timed out. Tried removing previous connections and setting up again. But no luck. Any advice?

Update fixed it.

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I sh

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?

iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.

Report to display Average time taken for processing payments".

Hi,
I have been asked to develop a report for "Report to display Average time taken for processing payments".
Could any one guide me technically what are the different tables i need to take to generate the report. Treat this is very urgent. Pls provide sample code too....
Thanks in advance....

Given below is the set up for credit card payment processing:
Set Up Credit Control Areas:
Define Credit Control Area
Transaction: OB45
Tables: T014
Action: Define a credit control area and its associated currency. The Update Group should be 00012. This entry is required so the sales order will calculate the value to authorize
Assign Company Code to Credit Control Area
Transaction: OB38
Tables: T001
Action: Assign a default credit control area for each company code
Define Permitted Credit Control Area for a Company
Code
Transaction:
Tables: T001CM
Action: For each company code enter every credit control area that can be used
Identify Credit Price
Transaction: V/08
Tables: T683S
Action: Towards the end of the pricing procedure, after all pricing and tax determination, create a subtotal line to store the value of the price plus any sales tax. Make the following entries:
Sub to: A
Reqt: 2
AltCTy: 4
Automatic Credit Checking
Transaction: OVA8
Tables: T691F
Action: Select each combination of credit control areas, risk categories and document types for which credit checking should be bypassed. You need to mark the field no Credit Check with the valid number for sales documents.
Set Up Payment Guarantees
Define Forms of Payment Guarantee
Transaction: OVFD
Tables: T691K
Action: R/3 is delivered with form 02 defined for payment cards. Other than the descriptor, the only other entry should be 3 in the column labeled PymtGuaCat
Define Payment Guarantee Procedure
Transaction:
Tables: T691M/T691O
Action: Define a procedure and a description.
Forms of Payment Guarantee and make the following entries Sequential Number 1
Payment Guarantee Form 02
Routine Number   0    Routine Number can be used to validate payment card presence.
Define Customer Payment Guarantee Flag
Transaction:
Tables: T691P
Action: Define a flag to be stored in table.
Create Customer Payment Guarantee = Payment Card Payment Cards (All Customers can use Payment Cards).
Define Sales Document Payment Guarantee Flag
Transaction:
Tables: T691R
Action: Define the flag that will be associated with sales document types that are relevant for payment cards
Assign Sales Document Payment Guarantee Flag
Transaction:
Tables: TVAK
Action: Assign the document flag type the sales documents types that are relevant for payment cards.
Determine Payment Guarantee Procedure
Transaction: OVFJ
Tables: T691U
Action: Combine the Customer flag and the sales document flag to derive the payment guarantee procedure
Payment Card Configuration
Define Card Types
Transaction:
Tables: TVCIN
Action: Create the different card types plus the routine that validates the card for length and prefix (etc)
Visa , Mastercard, American Express, and Discover
Create the following entries for each payment card
AMEX American Express ZCCARD_CHECK_AMEX Month
DC Discover Card ZCCARD_CHECK_DC Month*****
MC Mastercard ZCCARD_CHECK_MC Month
VISA Visa   ZCCARD_CHECK_VISA Month
The Routines can be created based on the original routines delivered by SAP.
*****SAP does not deliver a card check for Discover Card. We created our own routine.
Define Card Categories
Transaction:
Tables: TVCTY
Action: Define the card category to determine if a
payment card is a credit card or a procurement card.
Create the following two entries
Cat Description One Card Additional Data
CC Credit Cards No-check No-check
PC Procurement Cards No-check Check
Determine Card Categories
Transaction:
Tables: TVCTD
Action: For each card category map the account number range to a card category. Multiple ranges are possible for each card category or a masking technique can be used. Get the card number ranges from user community. Below is just a sample of what I am aware are the different types of cards.
Visa Credit Expires in 7 days.
    400000   405500
    405505   405549
    405555   415927
    415929   424603
    424606   427532
    427534   428799
    428900   471699
    471700   499999
Visa Procurement Expires in 7 days.
    405501   405504
    405550   405554
    415928   415928
    424604   424605
    427533   427533
    428800   428899
Mastercard Credit Expires in 30 days
    500000   540499
    540600   554999
    557000   599999
Mastercard Procurement Expires in 30 days
    540500   540599
    555000   556999
American Express Credit Expires in 30 days
    340000   349999
    370000   379999
Discover Card Credit Expires in 30 days
    601100   601199
Set Sales Documents to accept Payment Card Information Transaction:
Tables: TVAK
Action: Review the listing of Sales Document types and enter 03 in the column labeled PT for each type which can accept a payment card
Configuration for Authorization Request
Maintain Authorization Requirements
Transaction: OV9A
Tables: TFRM
Action: Define and activate the abap requirement that determines when an authorization is sent. Note that the following tables are available to be used in the abap requirement (VBAK, VBAP, VBKD, VBUK, and VBUP).
Define Checking Group
Transaction:
Tables: CCPGA
Action: Define a checking group and enter the
description. Then follow the below guidelines for the remaining fields to be filled.
AuthReq Routine 901 is set here.
PreAu If checked R/3 will request an authorization for a .01 and the authorization will be flagged as such. (Insight does not use pre-authorization check).
A horizon This is the days in the future SAP will use to determine the value to authorize
(Insight does not use auth horizon period).
Valid You will get warning message if the payment card is expiring within 30 days of order entry date.
Assign Checking Group to Sales Document
Transaction:
Tables: TVAK
Action: Assign the checking group to the sales order types relevant for payment cards
Define Authorization Validity Periods
Transaction:
Tables: TVCIN
Action: For each card type enter the authorization validity period in days.
AMEX American Express 30
DC Discover card 30
MC Master card 30
VISA Visa   7
Configuration for clearing houses
Create new General Ledger Accounts
Transaction: FS01
Tables:
Action: Two General Ledger accounts need to be created for each payment card type. One for A/R reconciliation purposes and one for credit card clearing.
Maintain Condition Types
Transaction: OV85
Tables: T685
Action: Define a condition type for account determination and assign it to access sequence A001
Define account determination procedure
Transaction: OV86
Tables: T683 / T683S
Action: Define procedure name and select the procedure for control. Enter the condition type defined in the previous step.
Assign account determination procedure
Transaction:
Tables:
Action: Determine which billing type we are using for payment card process.
Authorization and Settlement Control
Transaction:
Tables: TCCAA
Action: Define the general ledger accounts for reconciliation and clearing and assign the function modules for authorization and settlement along with the proper RFC destinations for each.
Enter Merchant IDs
Transaction:
Tables: TCCM
Action: Create the merchant ids that the company uses to process payment cards
Assign merchant ids
Transaction:
Tables: TCCAA
Action: Enter the merchant ids with each clearinghouse account

I can not delete process with correlation

Hi,
WE have an XI 3.0 SAP system (stack 16) and I cannot do exactly what SAP Note 807906 ("BPE-TS: Deleting process with correlations") describes:
If you are certain that the process is no longer required, call the log of the affected process (using the process selection (SWF_XI_SWI1)) or the SXMB_MONI, ... and display the work item of the process (Workflows).
Go to the technical work-item display (if this is not displayed by default) and then select Edit => Change there.
Under 'Services for Administration', select the 'Logical Deletion' function.
In my case, after going to the "work-item display", the "change" option appears in grey and cannot be selected... burtnot only this option cannot be selected but most of them in the wholw menu...
¿Any clue of what´s happening?
Regards

Hi,
Thanks for the answer.
The fact is that TX SWWL is the same as report RSWWWIDE (it deletes physically in DB and affects the workload). The difference with TX SWF_XI_SWI1 is that I could delete entries of my choice logically and I would have to wait only for the next table switch....
I would like to try to make TX SWF_XI_SWI1 working well...
thanks,

Set time out for single webservice in NWDS 2004s

hai,
i created webservices for session bean.created webservices are consumed by webdynpro client.
when the webdynpro client consuming it.if the response takes more than 60 sec the webservices are timed out so i want to set the time out for my webservice.
how can i set the time out (more 60 sec)for my webserive(for one service)?
thanks in advance.
Edited by: lakshman balanagu on Jun 24, 2008 11:20 AM

Hi
Try out this thing: I am not sure as I have not done this.
Go to this link: http://<server>:<j2ee port>/nwa --> System Management --> Overview --> Configuration
Application Resouce ( Select your resource from the list)
Check for "Connection Pooling".
Here you can check different options.

Is it possible to increase user exit time out for a partcular user

Dear Sir/madam,
Is it possible to increase the User Time Out for a Particular user ?
We do it through RZ10 and as per I know when it is changed, it is effected to all the users.
Pls advice.
Thanks,
Pranab

Hi Pranab,
Not possible for a single user.
Regards
Ashok Dalai

Can the time out for loading a page be extended for busy sites?

(Error:)
Problem loading page
The connection has timed out
The server at xxx.xxx is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
Question: Is there a way to extend the time out for sites which are known to be busy?

This issue appears under two different Mozzila "Questions". Both appear to have the same OUTDATED, INEFFECTIVE ANSWERS. A lot of us are on WIN7 now and still have erratic network speeds due to cable multiplexing -- but have been trained to leave the registry alone. Has not anyone solved this problem -- other than going notoriously unreliable FIOS ??

J1INUT Error - No data exist for processing with the given selection option

Hi Guru's,
I am using transaction J1INUT utilization of provision of TDS on Services for which in have made the provision with the help of J1INPR, But when I am executing J1INUT transaction .The following error message is displaying:
No data exist for processing with the given selection options
I have followed the below steps.
1) ME21N - OP Creation
2) ML81N - Service Entry
3) J1INPR - Provision of TDS
4) MIRO - Invoice Posting
I have checked the Table J_1IEWTPROV In that system is updating the table also. Even I have activated table TRWCA for field IND
But still I am getting the same error. Any suggestions to resolve this.
Appreciate your inputs. Thanks in Advance
Regards,
DeepaK

Hi Deepak,
Refer the below link and follow the steps - Provision for Taxes on Service Recieved.
Re: Provision for Taxes on Service Recieved
Hope it may useful to you.
Regards,
Govind Bhaskaran

What is the most suitable image format for processing with imaq?

Hello.
What is the most
suitable image format for processing with imaq?
I want to capture an image of a usb webcam, store and
then process it with imaq. I need to know what format to save the
captured image can then load and process it with imaq vision.
Thanks

The only criteria is: don't use JPEG for anything scientific! The compression involved with saving JPEGs means you always lose information. I tend to prefer PNG - it's compressed, but non-lossy, and also widely supported. TIFF is fine as well, but I don't think has any advantages over PNG for this application. JPEG2000 can give good non-lossy compression I think is slower to read/write than PNG.

Time Out for a syncronus BPEL process

Hi All,
Need your help with regards to the following:
From a parent BPEL process we need to invoke a synchronous BPEL Process .This(child) could take anything between 20-30 seconds for processing a request.
Now the requirement is to time out the parent BPEL process if the BPEL process it is calling takes more than 25 seconds for processing a request.
If( time taken to get from partner process >25 sec)
time out
Else
Move along with the rest of the process.
Approaches considered:
1) Pick activity :
Fallout: the pick activity would work only when you are calling a asynchronous BPEL process.
2) Having the invoke activity in a scope and adding an on Alarm branch for the scope.
Fallout: The BPEL process manager executes all the other activities even after exceeding the maximum time the process is set for timing out.
That is if we consider the below scenario
If( time taken to get from partner process >25 sec)
time out
Else
move along with the rest of the process.
Instead of executing the if block( onAlarm) it is executing the else block.
Request you to suggests approaches to suffice this requirement.

Hi Sai Madalli,
An approach to it, would be use the syncMaxWaitTime with time that you need, its a configuration per domain.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/events.htm#BABGGADB
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/app_trblshoot.htm
Regards

Process chains time outs and hangs with no error msg - in SP13

Hi all,
We are having all kind of weird problems after we patched our system with SP13. Our process chain time outs and hangs, but surprisingly we never get any error msg. And scarier part is, the problem seems to be intermittent. PC runs fine on some days and hangs on some.
Further analysis into the dump as below
Termination occurred in the ABAP program "SAPLRSSM" -
in "RSSM_SLEEP_DEBUG".
The main program was "SAPMSSY1 ".
In the source code the termination point is in (Include) program "LRSSMU39".
This refers to an issue that appears to have been addressed by OSS Note
934648(meant for SP8). This notes also indicates to populate RSADMIN table to
exclude "RSSM_SLEEP_DEBUG". Not sure if this note is valid for SP13? However we went ahead and populated the RSADMIN table.
So now we have no clue whats going on and where to fix the issue.
As per SAP suggestion we applied the following notes:
0000653996 Analyzing lock situations
0000893563 Correction: Deadlock on completion of a remote chain
0000994007 Corrections: Deadlock with external status query
0001005481 Correction: Process successful, but there is no instance
0001047174 Correction: Incorrect scope when locking in process chains
0001051957 Correction: TIME_OUT during dialog confirmation of processes
0001083660 Report for error stack analysis
Nothing seems to help us. And SAP suggested a few options, which we implemented to no rescue.
Im sure that many of the customers have applied SP13, and want some feedback from them, if this is happening in their systems too?
If so, how did you fix this issue?
Or this situation is unique to us?Please note that no settings were changed as of SP13 to that of what they were in SP12(unless it is a side effect of the patch itself). Everything worked fine with SP12 and is still working on the BIP system. All the problems are in BIQ patched to SP13.
Any pointers or insight would be appreciated. We have a customer msg open with SAP, and going back and forth, but nothing seemed to work as of today.
Thanks,
Voodi

Not sure which OSS helped us get past the issue, as SAP asked us to apply a ton of notes. But along which the notes, SAP has some suggestions for us, which we think did the magic. After the implementation of the suggestin we never faced the same issue again. The suggestion by SAP:
move the process chain callback in a batch job by executing
program RSSM_TRACE_SWITCH and selecting the flag "verifcation
of asynchronous processes - execute in batch".
Lemme know if this doesnt fix the issue, I can give all the notes that SAP asked us to apply.
Message was edited by:
voodi

How to Increase Time-out for Agent Manager in OLT?

Hello All,
When using the Oracle Load Testing Agent Manager for a load test of multiple scripts, I often get time-outs at the start of a test from OLT:
"Error communicating with.... : timed out after 60 seconds".
When I check the agentmanager.log file on the remote PC (Win XP SP2) I can see that the communcation started with the last line saying
"connected to server=......yaddayadda.... queue=queue/AgentPoolNotificationQueue"
which I assume means there was communication. And there were 2 attempts to start. After the first attempt, the entry:
05:31:09,513 WARN [AgentProcess] Forcibly terminating process 8041484 for agent agId1530_rndd49ae6b9-a8ec-4a0d-920d-16ee6c7021f4
The agentmanager_auth.log file show 2 lines near the start time of the test:
2010-05-12 05:30:18,606 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:36;Request:startagent;] - authentication successful
2010-05-12 05:31:09,513 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:42;Request:stopagent;] - authentication successful
Why was there a 'stopagent'?
The log from a successful agent show lines after the "Connected to server...." line ( "startAgent( pathTo.....a.. Launching agent.... Launched process 8792944 for agaent agId.....") so something appears to have not happened on the failed agents.
When starting a test immediately (rather than scheduling it as I want to for off-peak times) and the agents time out, I can stop it & restart test. Usually then they all start successfully.
Does anyone have any suggestions on failure reasons & possible solutions?
If there's nothing else that I might have missed, I'd like to trying increasing the time-out to say 120 or 500 seconds.
How can I do this?
Is there a way to get the agents to try starting again, or add a new vUser/script instance one the test is running?
Many thanks,
Neil
Edited by: Neil S on May 12, 2010 9:16 AM

Hi Ramesh,
I guess you need to increase the parameter "icm/keep_alive_timeout" value, it's default value is 60. please gothrough the link
http://help.sap.com/saphelp_webas630/helpdata/en/0b/1c7e7abbc311d5993a00508b6b8b11/content.htm
To increase this go to RZ10 and add this parameter in Instance profile and modify the value then restart the server to make the changes effective.
Regards,
Hari
PS: Point's are welcome

Report server times out for 3 mb of excel

I'm using a report viewer control in our application and it is working fine while displaying data and exporting it in different format by clicking export button provided by the report viewer.
I have another page but there will be a normal asp button to generate same report. so i am using report viewer control and calling the public method .Render exposed by the report viewer.
    byte[] bytes = rptViewver.ServerReport.Render("Excel", deviceInfo, out mimeType, out encoding, out extension, out streamids, out warnings);
this time i am getting below exception.
    Exception :System.Net.WebException: The request failed with HTTP status 504: Connection Timed Out.
    at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.Render(String Format, String DeviceInfo, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds)
    at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.Render(String Format, String DeviceInfo, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds)
    at Microsoft.Reporting.WebForms.ServerReport.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Reports_GenerateReport.DisplayReport(Boolean IsExport) in f:\Sunil\View Reports\Login\Reports\GenerateReport.aspx.cs:line 1702
My doubt is like, why it is getting time outs while leveraging same report viewer control internally.
any suggestions to get rid of this?

Hi sGudivada,
Please check the ExecutionLog view in ReportServer database to learn more information about the report. The report server execution log contains information about the reports that execute on the server or on multiple servers in a scale-out deployment. For
example:
TimeDataRetrieval fields. Record number of milliseconds spent retrieving the data.
TimeProcessing fields. Record number of milliseconds spent processing the report.
TimeRendering fields. Record number of milliseconds spent rendering the report.
Reference:
http://msdn.microsoft.com/en-us/library/ms159110(v=sql.110).aspx
There is an article about troubleshooting report performance, you can refer to it.
http://msdn.microsoft.com/en-us/library/bb522806(v=sql.105).aspx
Thanks,
Alisa Tang
Alisa Tang
TechNet Community Support

Crystal report Viewer Session times out for more data in Portal

Hi All,
     I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
       pageEncoding="ISO-8859-1" session="false"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
       import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
       <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
              <%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
       <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
       String reportPath,Sharedpath;
       ReportClientDocument reportClientDocument;
            ParameterFieldController parameterFieldController;
            try{
                reportPath = "reportlocation";
             Sharedpath = "Target Location";
                reportClientDocument = new ReportClientDocument();
                reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                     reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                     reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
                     System.out.println("Connecting...");
                   parameterFieldController = reportClientDocument.getDataDefController()
               .getParameterFieldController();
                parameterFieldController.setCurrentValues("", "param 1",
                     new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
              new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
       reportClientDocument.close();
       System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
              System.out.println("Finished...");
       } catch (ReportSDKException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
%>

Hi All,
     I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
       pageEncoding="ISO-8859-1" session="false"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
       import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
       <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
              <%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
       <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
       String reportPath,Sharedpath;
       ReportClientDocument reportClientDocument;
            ParameterFieldController parameterFieldController;
            try{
                reportPath = "reportlocation";
             Sharedpath = "Target Location";
                reportClientDocument = new ReportClientDocument();
                reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                     reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                     reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
                     System.out.println("Connecting...");
                   parameterFieldController = reportClientDocument.getDataDefController()
               .getParameterFieldController();
                parameterFieldController.setCurrentValues("", "param 1",
                     new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
              new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
       reportClientDocument.close();
       System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
              System.out.println("Finished...");
       } catch (ReportSDKException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
%>

Time-Out for Process with Correlation - Avoiding blocked Queues

Similar Messages

Maybe you are looking for