Time pasule setup causes problems

hi...i have installed time capsule as my apple network backup and modem; all is working well with the network and wireless backup-process ran for about 2 days but iam now facing 2 problems:
1. time machine gives error-massage "image of back-up volume cannot be activated" what do i have to do now?
2. wanted to add ax to network; after rebooting my ax-device i does not show up in the list of the ax-application i installed with the tc. what do i have to do to connect ax to tc?
thank you very much for your support
mathias

Mat65 wrote:
hi...i have installed time capsule as my apple network backup and modem; all is working well with the network and wireless backup-process ran for about 2 days but iam now facing 2 problems:
1. time machine gives error-massage "image of back-up volume cannot be activated" what do i have to do now?
you could try this:
go system preferences > time machine and turn TM off. click on +change disk+ and select none.
next, delete this file HD/Library/Preferences/com.apple.TimeMachine.plist.
restart your machine, go system preferences > time machine and turn TM back on. click on +change disk+, re-select your backup volume und click +use for backups+.
start a backup. does it work now ?
2. wanted to add ax to network; after rebooting my ax-device i does not show up in the list of the ax-application i installed with the tc. what do i have to do to connect ax to tc?
try to +factory restore+ the "ax" and start over. it may take a while for the "ax" to show up in airport utility. click on it once to highlight it, then click continue follow the on-screen instructions. choose to +join existing network+ when asked. enter password etc. where necessary. click save or whatever to confirm setting. wait for the "ax" to restart. again, it may take a little while for it to show up in airport utility.
does that work ?

Similar Messages

Adjusting system time during runtime causes problems?

Running a TDS based application on Win2008R2. 5.1.19 (yes we are updating to 5.2.36 later this week)
The system clock was adjusted back by 5 hours while running. No issue at time, but after an app restart we found we had a corrupted trans log with LSNs lower than those in database files. Had to recover by removing the tran log and clearing LSNs in a database file using db_load -r lsn
Is there something in the trans log contents or writing process that would be affected by a change in system clock backwards?

Hello,
I don't think a clock change could impact the transaction log
files. However it is definitely the case that an anti-virus
software scans should be avoided on Berkeley DB data files
(database, transaction log, region). An anti-virus scan could
be problematic if a page is scanned at the same time the library
code is trying to lock a database for an update. Is there any
chance that an anti-virus scan or some other application happened
at the same time which might have been touching a database page?
Thanks,
Sandra

I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?

Welcome to the HP Forums Hinalover,
I see by your post that you are having issues with the print spooler on the Windows 7 computers.
I can help you with this issue.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try running the Microsoft Fix It Tool to see if it will fix the print spooler.
Diagnose and repair Windows File and Folder Problems automatically.
You can also run the System File Checker to repair corrupted or missing files.
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 | 8.
You might end up having to do a repair of Windows.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My Mac is 15 months old and all of a sudden it has started resetting the time and date then I get a message saying not all apps will work because of the pre Jan date any help as to why ? Causing problems with wireless router.

My Mac book pro is 15 months old and now suddenly it has started resetting the date and time, causing problems with applications and my wireless access. Any suggestions as to why this is happening and how to fix it?

Seems the time isn't being saved to your computer correctly, it may be a corrupt file that isn't saving the time anymore.
You can move the
com.apple.systempreferences.plist
file out of your Users/Library/Preferences folder to the desktop and reboot.
then go to your System Preferences > Date and Time and set a time server close to your location (or in your time zone)
(trash the file on the desktop if no ill issues occur later on)
or you can follow/bookmark these support docs to reset your PRAM and SMC (and for future reference)
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509
I don't remember exactly where OS X is keeping it time settings now, but I think one of those choices should help resolve your issue and won't hurt anything giving them a shot. Perhaps someone else could refresh my memory.

A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and 1TB IOMEGA
any one have a solution? anyone dealt with this problem in the apple care program?

You are still under warranty and/or have AppleCare. Call them. Let them deal w/it.

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Time Capsule setup not working. Network much stricter than normal networks.

I recently purchased a Time Capsule and am trying to set it up under a very tightly controlled network that my dorms use. We are offered internet access through an ethernet port in the wall or through wireless. The internet here is restricted to the point where we must input our individual student passwords in order to access the internet. Also, in the initial setup, a client security agent had to be installed just to be able to gain access to websites.
My ideal for the Time Capsule would be to use its USB port for wireless access to my printer, use its base station ability to better the weak connection I get from my room, and to use it for Time Machine for my Macbook Pro.
My initial attempt to set up the Time Capsule used my laptop's connection on the wireless network and the wired ethernet connection of the Time Capsule. Once the Time Capsule established its connection, my laptop could no longer access the internet. The Security Client Agent Registration/download page for our dorms came up. It wasn't until I reset the Time Capsule did I regain my internet connection on my laptop. This made me believe that only one device could use my individual password at one time.
Time Capsule is probably very easy to setup but these network conditions are making it much more difficult. This has caused problems for connecting my iPod Touch as well.
How should I go about setting up the Time Capsule in order to gain the ideal as closely as possible?
Thanks for any help that anyone can offer.

sounds like a DNS problem to me..
Try to ping a server by his name instead of its IP.
If, for e.g. you can ping www.apple.com with success, DNS will not be the reason.
Otherwise, if DNS is the reason, this could be just a temporary fault.
Maybe the DNS server of your ISP went down or the DNS server (more or less a DNS cache) in your BT Business Router have a problem.
Try to restart the BT while the TC is powered down. After restart, power on the TC and reconnect your Mac to the WiFi.

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

Adobe CEF Helper multiple instances causing problems using newest CC 1.5.1.369

I just reinstalled all CC and Apps after a clean refresh wipe of PC. Within one week I am having several crashes and lockups and other strange behavior while using Photoshop, Indesign and other apps.
The lockups have been getting progressively worse, starting with very short delays while switching between apps or even switching to desktop to mouse click a file icon there which seemed almost like my machine would get focused on whatever app I was in and would not immediately release when I switched to do other things. Now the lockups are getting longer. Photoshop is also not fully closing down. So later if I reopen it, a photoshop process is still running in Task Manager and I must force it down before I can open a new file in a new instance of photoshop.
Today I had one complete crash of PS, as well as some strange lockup when I had two small ad files open. We are talking 1/6th page ads - small. I had them open side by side when it locks up and only thing I can move is the mouse curser which has changed to an "unallowed" icon (circle with slash). Rest of application and tools were locked up. In one of the files it would let me click a layer in the file and it would jump around the page. I checked Task manager and multiple CEF helpers were running around 30-50,000K private memory working set, and one of the CEF helpers was fluctuating between 13-20% or so of CPU usage. I immediately ended that service and photoshop started working again and I was able to save the files. I'm still noticing other problems like not being able to select multiple items at one time to copy/paste seen both in Indesign and Adobe acrobat pdf files.
I remember hearing about this issue long ago and checked the forums. Low and behold the long time Adobe CEF Helper problem thread was closed by a staffer in Feb, 2014, stating the following:
https://forums.adobe.com/thread/1235395?start=120&tstart=0
Jeff A Wright Feb 14, 2014 8:37 AM (in response to Michael.Noble64)
Locking this discussion as the cause of the excessive usage of Adobe CEF Helper was addressed in version 1.1.2.232. For full release notes please see Creative Cloud app for desktop | Release Notes -http://helpx.adobe.com/creative-cloud/release-note/cc-release-notes.html.
If you are experiencing difficulties with the Adobe CEF Helper please post a new discussion with the specifics of the behavior you are encountering.
I am having problems with the CEF helper and I have CC 1.5.1.369 as far as I can tell, on a fresh install a week old.
System:
Windows prof 7 sp1 64bit, 32gb ram, SSD main drive and mechanical data drive
Items added to this PC are autodesk products and Adobe CC Apps. I don't have a number of addons for CC apps like photoshop, just one plugin for photoshop called Geographic Imager.
Hopefully there is something more subtle I can try besides wiping my PC and reinstalling all the apps and settings again. A pc refresh and install this time with up to date CC and Apps was meant to fix all my broken file associations issues from previous updates - which it did. But was hoping not to end up with a dreaded CEF helper issue. Any help would be appreciated as this seems to be getting worse daily.
Other note, I turned off Syncing of settings when I first started noticing issues. Haven't tried much else besides ending CEF helper services when forced to.

I just want to note that my recommendations led my clients to purchase more than 5 licences of FMIS/AMIS througt the time.
As I see how low is the passion to react to any problem on Adobe side, I would have probably changed my mind.
This is really pain in the *** as any call to adobe official contact (taken on mind that to find one is a big quest by itself) lead just to reply "pay nasty amount for our consultancy Sir!" and it does not look any better here....
I am no novice on FMS/AMS platform, working with it more than 6 years throught many projects and I would not ask for some stupid questions which could be solved just by looking to documentation or could be solved by some performance eperience.
I am really upset for this :/

JTree + FK with same value causing problems

Hi
I can't figure this out. If I create biz components for 2 tables having a parent-child relationship and a jTree with appropriate rules, things are ok only if the parent's id are of different values than the child. When parent.id and child.id have the same values the jTree seems to recursively fire valueChanged() at strange times.
Example:
CREATE TABLE PARENT
PARENT_ID NUMBER CONSTRAINT PARENT_ID_NN NOT NULL,
PARENT_NAME VARCHAR2(40 BYTE),
CONSTRAINT PARENT_C_ID_PK
PRIMARY KEY
(PARENT_ID)
CREATE TABLE CHILD
CHILD_ID NUMBER CONSTRAINT CHILD_ID_NN NOT NULL,
CHILD_NAME VARCHAR2(40 BYTE),
PARENT_ID NUMBER,
CONSTRAINT CHILD_C_ID_PK
PRIMARY KEY
(CHILD_ID)
ALTER TABLE CHILD ADD (
CONSTRAINT PARENT_FK
FOREIGN KEY (PARENT_ID)
REFERENCES PARENT (PARENT_ID));
INSERT INTO PARENT VALUES (1, 'Parent 1');
INSERT INTO PARENT VALUES (2, 'Parent 2');
INSERT INTO PARENT VALUES (3, 'Parent 3');
INSERT INTO CHILD VALUES (100, 'Child A', 1);
INSERT INTO CHILD VALUES (200, 'Child B', 2);
INSERT INTO CHILD VALUES (300, 'Child C', 3);
I use the JDev 10.1.2 wizard to create biz components and test the AppMod to make sure the link works. Now I create a blank panel and drag over the ParentView data control. Using the jTree tree binding editor I create two rules:
1) DataCollectionDef.ParentView - DisplayAttribute.ParentName - BranchRuleAccessor.ChildView
2) DataCollectionDef.ChildView - DisplayAttribute.ChildName
Now I add a tree selection listener:
jTree1.addTreeSelectionListener(new TreeSelectionListener()
public void valueChanged(TreeSelectionEvent e)
DefaultMutableTreeNode selectedNode = (DefaultMutableTreeNode)jTree1.getLastSelectedPathComponent();
if (selectedNode != null)
System.out.println(selectedNode.getUserObject().toString());
When I run my panel and watch in JDev everything is fine, i.e. nothing is printed to the screen when it first loads and when I click a node, the correct UserObject prints.
Here's the rub, now I close the panel and update my child table as follows:
UPDATE pdssuser.child SET child_id = 1 WHERE child_id = 100;
UPDATE pdssuser.child SET child_id = 2 WHERE child_id = 200;
UPDATE pdssuser.child SET child_id = 3 WHERE child_id = 300;
This time, when I run my panel, the console shows that valueChanged() has been fired 3 times on load:
Parent 1
Parent 2
Parent 3
This behavior is causing problems with my real tree.
I haven't had any luck finding threads about this. Any ideas?
Thanks
John

ok, last one (i hope)
The same issue occurs with 10.1.2.1
...but changing the location where I add the treeSelectionListener to after setBindingContext() seems to fix the problem.
The second call to panelBinding.refreshControl() in setBindingContext() (the one after the call to jbinit()) is what fires the valueChanged events. Somewhere in there, DCBindingContainer.java or DCIteratorBinding.java, the treeSelectionListener is hearing that a value changed (maybe due to a query execution?). I guess the jTree1.setModel(...) call in jbinit() simply sets up the tree but the VO queries described in the Branch Rule accessors are executed on the refreshControl.....i'm out of my comfort zone here and may be confusing you with my "troubleshooting" so I'll just tell you my work-around.
So to fix it I add the treeSelectionListener in my main method (not jbinit()) after the setBindingContext() has been called.
I still have no idea why the FK triggers this behavior...but at least it's working.
* the main method
public static void main(String [] args)
try
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
catch(Exception exemp)
exemp.printStackTrace();
Panel1 panel = new Panel1();
panel.setBindingContext(JUTestFrame.startTestFrame("DataBindings.cpx", "null", panel, panel.getPanelBinding(), new Dimension(400, 300)));
panel.revalidate();
// Now add the treeSelectionListener
panel.addSelectionListener();
* the JbInit method
public void jbInit() throws Exception
this.setLayout(borderLayout1);
this.add(jTree1, BorderLayout.CENTER);
jTree1.setModel((TreeModel)panelBinding.bindUIControl("ParentView1", jTree1));
// DON'T ADD treeSelectionListener here
* Add the selection listener to the tree
public void addSelectionListener()
jTree1.addTreeSelectionListener(new TreeSelectionListener()
public void valueChanged(TreeSelectionEvent e)
DefaultMutableTreeNode selectedNode = (DefaultMutableTreeNode)jTree1.getLastSelectedPathComponent();
if (selectedNode != null)
System.out.println(selectedNode.getUserObject().toString());
}

SOAP adapter URL causing problems

Hi gurus,
As of PI 7.1, SAP is recommending to use:
http://host:port/XISOAPAdapter/MessageServlet?senderParty=FP&senderService=FS&interface=IF&receiverParty=TP&receiverService=TS&interfaceNamespace=IFNamespace
instead of
http://<serverhost>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<ServiceName>:<ChannelName>
while sending messages to the SOAP adapter. BUT, the new format is causing problems when the developers are trying to import the WSDL (to Webdynpro, eclipse, etc). Also, XMLSpy complains that the xml is not well-formed because of the soap address field.
So I removed the & signs and replaced them with the escape equivalent of & for the new format and tried to use:
http://host:port/XISOAPAdapter/MessageServlet?senderParty=FP&senderService=FS&interface=IF&receiverParty=TP&receiverService=TS&interfaceNamespace=IFNamespace
But this time, SOAP adapter replies saying there is no binding. How to overcome this?
Thanks
Gokhan

try this format:
http://<hostname OR IP addr>:<portno>/XISOAPAdapter/MessageServlet?channel=:<SenderService>:<SenderSOAPCC>&version=3.0&Sender.Service=<senderService>&Interface=<senderNamespace>%5E<senderMI>

Installing "Java for Mac OS X 10.5 Update 6" (1.0) causing problems

Hi,
I installed the "Java for Mac OS X 10.5 Update 6" (1.0)" yesterday evening and it caused problems:
- network
- date/time screwed up
- Time Machine crashed
My environment is a MacBook Pro, running 10.5.8, all latest patches applied. During the install all other applications were closed (my once in three months cleanup of the desktop , Time Machine was not running although it might have kicked in during the download, I left it alone for install and the necessary reboot. I didn't hook it up to the power, had 82% battery left, afterwards (after all repairs) still 76%, so my guess is that is not the root cause, although I did get the power source warning and waved it away during the installs.
Looking back into the logfiles and using some gut-feeling I do think somehow the date/time seeting was screwed up and caused all other problems. The date was reset to the famous Unix starttime, Jan 1, 1970. At first I didn't notice, only after my network (Airport Extreme based) asked me WPA password and then complained about the date/time I noticed something weird.
After resetting date/time, verifying the disk for problems (none found), re-entering the WPA password, network ran again, had to re-connect with the Time Capsule and check the sparse backup-volume there before I got everything up-and-running again.
Not a very big deal, but annoying, and certainly something wrong in the update here.
Anyone any explains ?
Regards,
Wim.

Sorry if I missed it...have you scoured logs for anything that might shed light on success/fail during the install?

Do I use same oracle account on 2 cluster nodes cause problem?

Do I use same oracle account on 2 cluster nodes cause problem?
If I use same oracle account on 2 cluster nodes running 2 database, when failover happens, 2 database will be running on one node, does 2 oracle account make SHM ... memory conflict?
or do I have to use oracle01 account on node1, oracle02 account on node2? Can not use same name account?
Thanks.

I'm not 100% certain I understood the question, so I'll rephrase them and answer them.
Q. If I have the same Oracle account on each cluster node, e.g. uid=100 (oracle) gid=100 (oinstall), groups dba=200, can I run two databases, one on each cluster node without problems?
A. Yes. Having multiple DBs on one node is not a problem and doesn't cause shared memory problems. Obviously each database needs a different database name and thus different SID.
Q. Can I have two different Oracle accounts on each cluster node e.g. uid=100 (oraclea) gid=100 (oinstall), groups dba=200 and e.g. uid=300 (oracleb) gid=100 (oinstall), groups dba=200, and run two databases, one for each Oracle user?
A. Yes. The different Oracle user names would need to be associated with different Oracle installations, i.e. Oracle HOMEs. So you might have /oracle/oracle/product/10.2.0/db_1 (oraclea) and /oracle/oracle/product/11.0.1.0/db_1 (oracleb). The ORACLE_HOME is then used to determine the Oracle user name by checking the user of the Oracle binary in the ${ORACLE_HOME}/bin directory.
Tim
---

Time pasule setup causes problems

Similar Messages

Maybe you are looking for